diff mbox series

[net-next,v2] net: ethernet: mediatek: support setting MTU

Message ID 20210125042046.5599-1-dqfext@gmail.com (mailing list archive)
State Accepted
Commit 4fd59792097a6b2fb949d41264386a7ecade469e
Delegated to: Netdev Maintainers
Headers show
Series [net-next,v2] net: ethernet: mediatek: support setting MTU | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 10 of 10 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch warning WARNING: line length of 82 exceeds 80 columns
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Qingfang Deng Jan. 25, 2021, 4:20 a.m. UTC 
MT762x HW, except for MT7628, supports frame length up to 2048
(maximum length on GDM), so allow setting MTU up to 2030.

Also set the default frame length to the hardware default 1518.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
---
Changes v1 -> v2:

- Set netdev->max_mtu accordingly
- Mention default MAX_RX change

 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 43 ++++++++++++++++++---
 drivers/net/ethernet/mediatek/mtk_eth_soc.h | 12 ++++--
 2 files changed, 47 insertions(+), 8 deletions(-)

Comments

Andrew Lunn Jan. 25, 2021, 1:01 p.m. UTC | #1 
On Mon, Jan 25, 2021 at 12:20:46PM +0800, DENG Qingfang wrote:
> MT762x HW, except for MT7628, supports frame length up to 2048
> (maximum length on GDM), so allow setting MTU up to 2030.
> 
> Also set the default frame length to the hardware default 1518.
> 
> Signed-off-by: DENG Qingfang <dqfext@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
Jakub Kicinski Jan. 26, 2021, 2:33 a.m. UTC | #2 
On Mon, 25 Jan 2021 14:01:05 +0100 Andrew Lunn wrote:
> On Mon, Jan 25, 2021 at 12:20:46PM +0800, DENG Qingfang wrote:
> > MT762x HW, except for MT7628, supports frame length up to 2048
> > (maximum length on GDM), so allow setting MTU up to 2030.
> > 
> > Also set the default frame length to the hardware default 1518.
> > 
> > Signed-off-by: DENG Qingfang <dqfext@gmail.com>  
> 
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Applied, thanks!
patchwork-bot+netdevbpf@kernel.org Jan. 26, 2021, 3:20 a.m. UTC | #3 
Hello:

This patch was applied to netdev/net-next.git (refs/heads/master):

On Mon, 25 Jan 2021 12:20:46 +0800 you wrote:
> MT762x HW, except for MT7628, supports frame length up to 2048
> (maximum length on GDM), so allow setting MTU up to 2030.
> 
> Also set the default frame length to the hardware default 1518.
> 
> Signed-off-by: DENG Qingfang <dqfext@gmail.com>
> 
> [...]

Here is the summary with links:
  - [net-next,v2] net: ethernet: mediatek: support setting MTU
    https://git.kernel.org/netdev/net-next/c/4fd59792097a

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 6d2d60675ffd..01d3ee4b5829 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -353,7 +353,7 @@  static void mtk_mac_config(struct phylink_config *config, unsigned int mode,
 	/* Setup gmac */
 	mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
 	mcr_new = mcr_cur;
-	mcr_new |= MAC_MCR_MAX_RX_1536 | MAC_MCR_IPG_CFG | MAC_MCR_FORCE_MODE |
+	mcr_new |= MAC_MCR_IPG_CFG | MAC_MCR_FORCE_MODE |
 		   MAC_MCR_BACKOFF_EN | MAC_MCR_BACKPR_EN | MAC_MCR_FORCE_LINK;
 
 	/* Only update control register when needed! */
@@ -759,8 +759,8 @@  static void mtk_get_stats64(struct net_device *dev,
 static inline int mtk_max_frag_size(int mtu)
 {
 	/* make sure buf_size will be at least MTK_MAX_RX_LENGTH */
-	if (mtu + MTK_RX_ETH_HLEN < MTK_MAX_RX_LENGTH)
-		mtu = MTK_MAX_RX_LENGTH - MTK_RX_ETH_HLEN;
+	if (mtu + MTK_RX_ETH_HLEN < MTK_MAX_RX_LENGTH_2K)
+		mtu = MTK_MAX_RX_LENGTH_2K - MTK_RX_ETH_HLEN;
 
 	return SKB_DATA_ALIGN(MTK_RX_HLEN + mtu) +
 		SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
@@ -771,7 +771,7 @@  static inline int mtk_max_buf_size(int frag_size)
 	int buf_size = frag_size - NET_SKB_PAD - NET_IP_ALIGN -
 		       SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
 
-	WARN_ON(buf_size < MTK_MAX_RX_LENGTH);
+	WARN_ON(buf_size < MTK_MAX_RX_LENGTH_2K);
 
 	return buf_size;
 }
@@ -2499,6 +2499,35 @@  static void mtk_uninit(struct net_device *dev)
 	mtk_rx_irq_disable(eth, ~0);
 }
 
+static int mtk_change_mtu(struct net_device *dev, int new_mtu)
+{
+	int length = new_mtu + MTK_RX_ETH_HLEN;
+	struct mtk_mac *mac = netdev_priv(dev);
+	struct mtk_eth *eth = mac->hw;
+	u32 mcr_cur, mcr_new;
+
+	if (!MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628)) {
+		mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
+		mcr_new = mcr_cur & ~MAC_MCR_MAX_RX_MASK;
+
+		if (length <= 1518)
+			mcr_new |= MAC_MCR_MAX_RX(MAC_MCR_MAX_RX_1518);
+		else if (length <= 1536)
+			mcr_new |= MAC_MCR_MAX_RX(MAC_MCR_MAX_RX_1536);
+		else if (length <= 1552)
+			mcr_new |= MAC_MCR_MAX_RX(MAC_MCR_MAX_RX_1552);
+		else
+			mcr_new |= MAC_MCR_MAX_RX(MAC_MCR_MAX_RX_2048);
+
+		if (mcr_new != mcr_cur)
+			mtk_w32(mac->hw, mcr_new, MTK_MAC_MCR(mac->id));
+	}
+
+	dev->mtu = new_mtu;
+
+	return 0;
+}
+
 static int mtk_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
 	struct mtk_mac *mac = netdev_priv(dev);
@@ -2795,6 +2824,7 @@  static const struct net_device_ops mtk_netdev_ops = {
 	.ndo_set_mac_address	= mtk_set_mac_address,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl		= mtk_do_ioctl,
+	.ndo_change_mtu		= mtk_change_mtu,
 	.ndo_tx_timeout		= mtk_tx_timeout,
 	.ndo_get_stats64        = mtk_get_stats64,
 	.ndo_fix_features	= mtk_fix_features,
@@ -2896,7 +2926,10 @@  static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
 	eth->netdev[id]->irq = eth->irq[0];
 	eth->netdev[id]->dev.of_node = np;
 
-	eth->netdev[id]->max_mtu = MTK_MAX_RX_LENGTH - MTK_RX_ETH_HLEN;
+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628))
+		eth->netdev[id]->max_mtu = MTK_MAX_RX_LENGTH - MTK_RX_ETH_HLEN;
+	else
+		eth->netdev[id]->max_mtu = MTK_MAX_RX_LENGTH_2K - MTK_RX_ETH_HLEN;
 
 	return 0;
 
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 454cfcd465fd..fd3cec8f06ba 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -17,12 +17,13 @@ 
 #include <linux/phylink.h>
 
 #define MTK_QDMA_PAGE_SIZE	2048
-#define	MTK_MAX_RX_LENGTH	1536
+#define MTK_MAX_RX_LENGTH	1536
+#define MTK_MAX_RX_LENGTH_2K	2048
 #define MTK_TX_DMA_BUF_LEN	0x3fff
 #define MTK_DMA_SIZE		256
 #define MTK_NAPI_WEIGHT		64
 #define MTK_MAC_COUNT		2
-#define MTK_RX_ETH_HLEN		(VLAN_ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN)
+#define MTK_RX_ETH_HLEN		(ETH_HLEN + ETH_FCS_LEN)
 #define MTK_RX_HLEN		(NET_SKB_PAD + MTK_RX_ETH_HLEN + NET_IP_ALIGN)
 #define MTK_DMA_DUMMY_DESC	0xffffffff
 #define MTK_DEFAULT_MSG_ENABLE	(NETIF_MSG_DRV | \
@@ -320,7 +321,12 @@ 
 
 /* Mac control registers */
 #define MTK_MAC_MCR(x)		(0x10100 + (x * 0x100))
-#define MAC_MCR_MAX_RX_1536	BIT(24)
+#define MAC_MCR_MAX_RX_MASK	GENMASK(25, 24)
+#define MAC_MCR_MAX_RX(_x)	(MAC_MCR_MAX_RX_MASK & ((_x) << 24))
+#define MAC_MCR_MAX_RX_1518	0x0
+#define MAC_MCR_MAX_RX_1536	0x1
+#define MAC_MCR_MAX_RX_1552	0x2
+#define MAC_MCR_MAX_RX_2048	0x3
 #define MAC_MCR_IPG_CFG		(BIT(18) | BIT(16))
 #define MAC_MCR_FORCE_MODE	BIT(15)
 #define MAC_MCR_TX_EN		BIT(14)