diff mbox series

ARM: dts: omap3-echo: Add speaker sound card support

Message ID 20201227171353.2002674-1-nerv@dawncrow.de (mailing list archive)
State New, archived
Headers show
Series ARM: dts: omap3-echo: Add speaker sound card support | expand

Commit Message

André Hentschel Dec. 27, 2020, 5:13 p.m. UTC 
This adds audio playback to the first generation Amazon Echo

Signed-off-by: André Hentschel <nerv@dawncrow.de>
---

It took me by far too long to get this working as the codec sets one important bit based on the
combination of provided supplies. That was just too hidden for me.
The first generation Amazon Echo was codenamed Misto, so I used that for the sound card name.

 arch/arm/boot/dts/omap3-echo.dts | 67 ++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

Comments

Tony Lindgren Jan. 26, 2021, 11:15 a.m. UTC | #1 
* André Hentschel <nerv@dawncrow.de> [201227 19:18]:
> This adds audio playback to the first generation Amazon Echo
> 
> Signed-off-by: André Hentschel <nerv@dawncrow.de>
> ---
> 
> It took me by far too long to get this working as the codec sets one important bit based on the
> combination of provided supplies. That was just too hidden for me.
> The first generation Amazon Echo was codenamed Misto, so I used that for the sound card name.

Cool, so it's now usable as a music player then :)

Applying into omap-for-v5.12/dt thanks.

Tony
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/omap3-echo.dts b/arch/arm/boot/dts/omap3-echo.dts
index 93ffeddada1e..b9fd113979f2 100644
--- a/arch/arm/boot/dts/omap3-echo.dts
+++ b/arch/arm/boot/dts/omap3-echo.dts
@@ -86,6 +86,38 @@  &gpio3 12 GPIO_ACTIVE_HIGH /* GPIO_76 */
 		linux,axis = <REL_X>;
 		rotary-encoder,relative-axis;
 	};
+
+	speaker_amp: speaker-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* gpio_129 */
+		sound-name-prefix = "Speaker Amp";
+		VCC-supply = <&vcc1v8>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Misto Speaker";
+		simple-audio-card,widgets =
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"Speaker Amp INL", "HPL",
+			"Speaker Amp INR", "HPR",
+			"Speaker", "Speaker Amp OUTL",
+			"Speaker", "Speaker Amp OUTR";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,aux-devs = <&speaker_amp>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcbsp2>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&codec0>;
+			system-clock-frequency = <19200000>;
+		};
+	};
 };
 
 &i2c1 {
@@ -96,6 +128,13 @@  tps: tps@2d {
 	};
 };
 
+&mcbsp2 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+};
+
 &i2c2 {
 	clock-frequency = <400000>;
 
@@ -277,6 +316,22 @@  chan8 {
 	};
 };
 
+&i2c3 {
+	clock-frequency = <400000>;
+
+	codec0: codec@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&sys_clkout1>;
+		clock-names = "mclk";
+		ldoin-supply = <&vcc1v8>;
+		iov-supply = <&vcc1v8>;
+		reset-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;	/* gpio_74 */
+	};
+};
+
+
 #include "tps65910.dtsi"
 
 &omap3_pmx_core {
@@ -290,6 +345,9 @@  button_pins: pinmux_button_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20dc, PIN_INPUT | MUX_MODE4)	/* dss_data0.gpio_70 */
 			OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4)	/* dss_data2.gpio_72 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4)	/* dss_data4.gpio_74 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* dss_data15.gpio_85 */
+			OMAP3_CORE1_IOPAD(0x2a1a, PIN_OUTPUT | MUX_MODE0)	/* sys_clkout1.sys_clkout1 */
 		>;
 	};
 
@@ -318,6 +376,15 @@  OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_d
 			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
 		>;
 	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx.mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2.dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dx.mcbsp2_dx */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {