@@ -213,16 +213,17 @@ unsigned int get_c0_compare_int(void)
void __init plat_mem_setup(void)
{
- unsigned long fdt_start;
+ void *dtb;
set_io_port_base(KSEG1);
/* Get the position of the FDT passed by the bootloader */
- fdt_start = fw_getenvl("fdt_start");
- if (fdt_start)
- __dt_setup_arch((void *)KSEG0ADDR(fdt_start));
- else if (fw_passed_dtb)
- __dt_setup_arch((void *)KSEG0ADDR(fw_passed_dtb));
+ dtb = (void *)fw_getenvl("fdt_start");
+ if (dtb == NULL)
+ dtb = get_fdt();
+
+ if (dtb)
+ __dt_setup_arch((void *)KSEG0ADDR(dtb));
ath79_reset_base = ioremap(AR71XX_RESET_BASE,
AR71XX_RESET_SIZE);
@@ -161,11 +161,10 @@ void __init plat_mem_setup(void)
/* intended to somewhat resemble ARM; see Documentation/arm/booting.rst */
if (fw_arg0 == 0 && fw_arg1 == 0xffffffff)
dtb = phys_to_virt(fw_arg2);
- else if (fw_passed_dtb) /* UHI interface or appended dtb */
- dtb = (void *)fw_passed_dtb;
- else if (&__dtb_start != &__dtb_end)
- dtb = (void *)__dtb_start;
else
+ dtb = get_fdt();
+
+ if (!dtb)
panic("no dtb found");
__dt_setup_arch(dtb);
@@ -39,14 +39,13 @@ void __init *plat_get_fdt(void)
/* Already set up */
return (void *)fdt;
- if (fw_passed_dtb && !fdt_check_header((void *)fw_passed_dtb)) {
+ fdt = (void *)get_fdt();
+ if (fdt && !fdt_check_header(fdt)) {
/*
* We have been provided with the appropriate device tree for
* the board. Make use of it & search for any machine struct
* based upon the root compatible string.
*/
- fdt = (void *)fw_passed_dtb;
-
for_each_mips_machine(check_mach) {
match = mips_machine_is_compatible(check_mach, fdt);
if (match) {
@@ -112,7 +112,27 @@ extern char arcs_cmdline[COMMAND_LINE_SIZE];
extern unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3;
#ifdef CONFIG_USE_OF
-extern unsigned long fw_passed_dtb;
+#include <linux/libfdt.h>
+#include <linux/of_fdt.h>
+
+extern char __appended_dtb[];
+
+static inline void *get_fdt(void)
+{
+ if (IS_ENABLED(CONFIG_MIPS_RAW_APPENDED_DTB) ||
+ IS_ENABLED(CONFIG_MIPS_ELF_APPENDED_DTB))
+ if (fdt_magic(&__appended_dtb) == FDT_MAGIC)
+ return &__appended_dtb;
+
+ if (fw_arg0 == -2) /* UHI interface */
+ return (void *)fw_arg1;
+
+ if (IS_ENABLED(CONFIG_BUILTIN_DTB))
+ if (&__dtb_start != &__dtb_end)
+ return &__dtb_start;
+
+ return NULL;
+}
#endif
/*
@@ -282,7 +282,6 @@ union octeon_cvmemctl {
extern void octeon_check_cpu_bist(void);
int octeon_prune_device_tree(void);
-extern const char __appended_dtb;
extern const char __dtb_octeon_3xxx_begin;
extern const char __dtb_octeon_68xx_begin;
@@ -93,33 +93,6 @@ NESTED(kernel_entry, 16, sp) # kernel entry point
jr t0
0:
-#ifdef CONFIG_USE_OF
-#if defined(CONFIG_MIPS_RAW_APPENDED_DTB) || \
- defined(CONFIG_MIPS_ELF_APPENDED_DTB)
-
- PTR_LA t2, __appended_dtb
-
-#ifdef CONFIG_CPU_BIG_ENDIAN
- li t1, 0xd00dfeed
-#else /* !CONFIG_CPU_BIG_ENDIAN */
- li t1, 0xedfe0dd0
-#endif /* !CONFIG_CPU_BIG_ENDIAN */
- lw t0, (t2)
- beq t0, t1, dtb_found
-#endif /* CONFIG_MIPS_RAW_APPENDED_DTB || CONFIG_MIPS_ELF_APPENDED_DTB */
- li t1, -2
- move t2, a1
- beq a0, t1, dtb_found
-
-#ifdef CONFIG_BUILTIN_DTB
- PTR_LA t2, __dtb_start
- PTR_LA t1, __dtb_end
- bne t1, t2, dtb_found
-#endif /* CONFIG_BUILTIN_DTB */
-
- li t2, 0
-dtb_found:
-#endif /* CONFIG_USE_OF */
PTR_LA t0, __bss_start # clear .bss
LONG_S zero, (t0)
PTR_LA t1, __bss_stop - LONGSIZE
@@ -133,10 +106,6 @@ dtb_found:
LONG_S a2, fw_arg2
LONG_S a3, fw_arg3
-#ifdef CONFIG_USE_OF
- LONG_S t2, fw_passed_dtb
-#endif
-
MTC0 zero, CP0_CONTEXT # clear context register
#ifdef CONFIG_64BIT
MTC0 zero, CP0_XCONTEXT
@@ -792,10 +792,6 @@ void __init setup_arch(char **cmdline_p)
unsigned long kernelsp[NR_CPUS];
unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3;
-#ifdef CONFIG_USE_OF
-unsigned long fw_passed_dtb;
-#endif
-
#ifdef CONFIG_DEBUG_FS
struct dentry *mips_debugfs_dir;
static int __init debugfs_mips(void)
@@ -73,11 +73,8 @@ void __init plat_mem_setup(void)
set_io_port_base((unsigned long) KSEG1);
- if (fw_passed_dtb) /* UHI interface */
- dtb = (void *)fw_passed_dtb;
- else if (&__dtb_start != &__dtb_end)
- dtb = (void *)__dtb_start;
- else
+ dtb = get_fdt();
+ if (dtb == NULL)
panic("no dtb found");
/*
@@ -21,24 +21,11 @@ const char *get_system_type(void)
return "PIC32MZDA";
}
-static ulong get_fdtaddr(void)
-{
- ulong ftaddr = 0;
-
- if (fw_passed_dtb && !fw_arg2 && !fw_arg3)
- return (ulong)fw_passed_dtb;
-
- if (&__dtb_start < &__dtb_end)
- ftaddr = (ulong)__dtb_start;
-
- return ftaddr;
-}
-
void __init plat_mem_setup(void)
{
void *dtb;
- dtb = (void *)get_fdtaddr();
+ dtb = get_fdt();
if (!dtb) {
pr_err("pic32: no DTB found.\n");
return;
@@ -64,20 +64,15 @@ static int __init early_init_dt_find_memory(unsigned long node,
void __init plat_mem_setup(void)
{
- void *dtb = NULL;
+ void *dtb;
set_io_port_base(KSEG1);
/*
* Load the builtin devicetree. This causes the chosen node to be
- * parsed resulting in our memory appearing. fw_passed_dtb is used
- * by CONFIG_MIPS_APPENDED_RAW_DTB as well.
+ * parsed resulting in our memory appearing.
*/
- if (fw_passed_dtb)
- dtb = (void *)fw_passed_dtb;
- else if (&__dtb_start != &__dtb_end)
- dtb = (void *)__dtb_start;
-
+ dtb = get_fdt();
__dt_setup_arch(dtb);
of_scan_flat_dt(early_init_dt_find_memory, NULL);
Selection of the DTB to be used was burried in more or less readable code in head.S. Move this code into a inline helper function and use it. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> --- arch/mips/ath79/setup.c | 13 +++++------ arch/mips/bmips/setup.c | 7 +++--- arch/mips/generic/init.c | 5 ++--- arch/mips/include/asm/bootinfo.h | 22 ++++++++++++++++++- arch/mips/include/asm/octeon/octeon.h | 1 - arch/mips/kernel/head.S | 31 --------------------------- arch/mips/kernel/setup.c | 4 ---- arch/mips/lantiq/prom.c | 7 ++---- arch/mips/pic32/pic32mzda/init.c | 15 +------------ arch/mips/ralink/of.c | 11 +++------- 10 files changed, 39 insertions(+), 77 deletions(-)