diff mbox series

[v9,net-next,03/15] net: mvpp2: add CM3 SRAM memory map

Message ID 1612723137-18045-4-git-send-email-stefanc@marvell.com (mailing list archive)
State New, archived
Headers show
Series net: mvpp2: Add TX Flow Control support | expand

Commit Message

Stefan Chulski Feb. 7, 2021, 6:38 p.m. UTC 
From: Stefan Chulski <stefanc@marvell.com>

This patch adds CM3 memory map and CM3 read/write callbacks.

Signed-off-by: Stefan Chulski <stefanc@marvell.com>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2.h      |  1 +
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 26 ++++++++++++++++++++
 2 files changed, 27 insertions(+)

Comments

Andrew Lunn Feb. 7, 2021, 9:32 p.m. UTC | #1 
> +static int mvpp2_get_sram(struct platform_device *pdev,
> +			  struct mvpp2 *priv)
> +{
> +	struct resource *res;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
> +	if (!res) {
> +		if (has_acpi_companion(&pdev->dev))
> +			dev_warn(&pdev->dev, "ACPI is too old, Flow control not supported\n");
> +		else
> +			dev_warn(&pdev->dev, "DT is too old, Flow control not supported\n");
> +		return 0;
> +	}
> +
> +	priv->cm3_base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(priv->cm3_base))
> +		return PTR_ERR(priv->cm3_base);
> +
> +	return 0;
> +}

This looks much better. Thanks

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
diff mbox series

Patch

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
index 6bd7e40..56e90ab 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
@@ -925,6 +925,7 @@  struct mvpp2 {
 	/* Shared registers' base addresses */
 	void __iomem *lms_base;
 	void __iomem *iface_base;
+	void __iomem *cm3_base;
 
 	/* On PPv2.2, each "software thread" can access the base
 	 * register through a separate address space, each 64 KB apart
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index a07cf60..eec3796 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -6846,6 +6846,27 @@  static int mvpp2_init(struct platform_device *pdev, struct mvpp2 *priv)
 	return 0;
 }
 
+static int mvpp2_get_sram(struct platform_device *pdev,
+			  struct mvpp2 *priv)
+{
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	if (!res) {
+		if (has_acpi_companion(&pdev->dev))
+			dev_warn(&pdev->dev, "ACPI is too old, Flow control not supported\n");
+		else
+			dev_warn(&pdev->dev, "DT is too old, Flow control not supported\n");
+		return 0;
+	}
+
+	priv->cm3_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->cm3_base))
+		return PTR_ERR(priv->cm3_base);
+
+	return 0;
+}
+
 static int mvpp2_probe(struct platform_device *pdev)
 {
 	const struct acpi_device_id *acpi_id;
@@ -6902,6 +6923,11 @@  static int mvpp2_probe(struct platform_device *pdev)
 		priv->iface_base = devm_ioremap_resource(&pdev->dev, res);
 		if (IS_ERR(priv->iface_base))
 			return PTR_ERR(priv->iface_base);
+
+		/* Map CM3 SRAM */
+		err = mvpp2_get_sram(pdev, priv);
+		if (err)
+			dev_warn(&pdev->dev, "Fail to alloc CM3 SRAM\n");
 	}
 
 	if (priv->hw_version == MVPP22 && dev_of_node(&pdev->dev)) {