| Message ID | 8156558747a6db89a4e8e015ab0b1e9bea07b27f.1612821109.git.isaku.yamahata@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ACPI related fixes | expand |
On Mon, 8 Feb 2021 13:57:23 -0800 isaku.yamahata@gmail.com wrote: > From: Isaku Yamahata <isaku.yamahata@intel.com> > > From table 5.9 SMI_CMD of ACPI spec > > This field is reserved and must be zero on system > > that does not support System Management mode. > > When smm is not enabled, set it to zero to comform to the spec. > When -machine smm=off is passed, the change to FACP is as follows. > > @@ -1,46 +1,46 @@ > /* > * Intel ACPI Component Architecture > * AML/ASL+ Disassembler version 20180105 (64-bit version) > * Copyright (c) 2000 - 2018 Intel Corporation > * > - * Disassembly of tests/data/acpi/q35/FACP, Fri Feb 5 16:57:04 2021 > + * Disassembly of /tmp/aml-1OQYX0, Fri Feb 5 16:57:04 2021 > * > * ACPI Data Table [FACP] > * > * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue > */ > > [000h 0000 4] Signature : "FACP" [Fixed ACPI Description Table (FADT)] > [004h 0004 4] Table Length : 000000F4 > [008h 0008 1] Revision : 03 > -[009h 0009 1] Checksum : 1F > +[009h 0009 1] Checksum : D6 > [00Ah 0010 6] Oem ID : "BOCHS " > [010h 0016 8] Oem Table ID : "BXPCFACP" > [018h 0024 4] Oem Revision : 00000001 > [01Ch 0028 4] Asl Compiler ID : "BXPC" > [020h 0032 4] Asl Compiler Revision : 00000001 > > [024h 0036 4] FACS Address : 00000000 > [028h 0040 4] DSDT Address : 00000000 > [02Ch 0044 1] Model : 01 > [02Dh 0045 1] PM Profile : 00 [Unspecified] > [02Eh 0046 2] SCI Interrupt : 0009 > -[030h 0048 4] SMI Command Port : 000000B2 > -[034h 0052 1] ACPI Enable Value : 02 > -[035h 0053 1] ACPI Disable Value : 03 > +[030h 0048 4] SMI Command Port : 00000000 > +[034h 0052 1] ACPI Enable Value : 00 > +[035h 0053 1] ACPI Disable Value : 00 > [036h 0054 1] S4BIOS Command : 00 > [037h 0055 1] P-State Control : 00 > [038h 0056 4] PM1A Event Block Address : 00000600 > [03Ch 0060 4] PM1B Event Block Address : 00000000 > [040h 0064 4] PM1A Control Block Address : 00000604 > [044h 0068 4] PM1B Control Block Address : 00000000 > [048h 0072 4] PM2 Control Block Address : 00000000 > [04Ch 0076 4] PM Timer Block Address : 00000608 > [050h 0080 4] GPE0 Block Address : 00000620 > [054h 0084 4] GPE1 Block Address : 00000000 > [058h 0088 1] PM1 Event Block Length : 04 > [059h 0089 1] PM1 Control Block Length : 02 > [05Ah 0090 1] PM2 Control Block Length : 00 > [05Bh 0091 1] PM Timer Block Length : 04 > [05Ch 0092 1] GPE0 Block Length : 10 > [05Dh 0093 1] GPE1 Block Length : 00 > > Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> when migrated to old QEMU, and VM after that is reset it regenerate ACPI tables for old QEMU, so guest should be able to turn on ACPI. Reviewed-by: Igor Mammedov <imammedo@redhat.com> > --- > hw/i386/acpi-build.c | 12 +++++++++--- > 1 file changed, 9 insertions(+), 3 deletions(-) > > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c > index f56d699c7f..c2f11d95d8 100644 > --- a/hw/i386/acpi-build.c > +++ b/hw/i386/acpi-build.c > @@ -139,6 +139,8 @@ const struct AcpiGenericAddress x86_nvdimm_acpi_dsmio = { > static void init_common_fadt_data(MachineState *ms, Object *o, > AcpiFadtData *data) > { > + X86MachineState *x86ms = X86_MACHINE(ms); > + bool smm_enabled = x86_machine_is_smm_enabled(x86ms); > uint32_t io = object_property_get_uint(o, ACPI_PM_PROP_PM_IO_BASE, NULL); > AmlAddressSpace as = AML_AS_SYSTEM_IO; > AcpiFadtData fadt = { > @@ -159,12 +161,16 @@ static void init_common_fadt_data(MachineState *ms, Object *o, > .rtc_century = RTC_CENTURY, > .plvl2_lat = 0xfff /* C2 state not supported */, > .plvl3_lat = 0xfff /* C3 state not supported */, > - .smi_cmd = ACPI_PORT_SMI_CMD, > + .smi_cmd = smm_enabled ? ACPI_PORT_SMI_CMD : 0, > .sci_int = object_property_get_uint(o, ACPI_PM_PROP_SCI_INT, NULL), > .acpi_enable_cmd = > - object_property_get_uint(o, ACPI_PM_PROP_ACPI_ENABLE_CMD, NULL), > + smm_enabled ? > + object_property_get_uint(o, ACPI_PM_PROP_ACPI_ENABLE_CMD, NULL) : > + 0, > .acpi_disable_cmd = > - object_property_get_uint(o, ACPI_PM_PROP_ACPI_DISABLE_CMD, NULL), > + smm_enabled ? > + object_property_get_uint(o, ACPI_PM_PROP_ACPI_DISABLE_CMD, NULL) : > + 0, > .pm1a_evt = { .space_id = as, .bit_width = 4 * 8, .address = io }, > .pm1a_cnt = { .space_id = as, .bit_width = 2 * 8, > .address = io + 0x04 },
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c index f56d699c7f..c2f11d95d8 100644 --- a/hw/i386/acpi-build.c +++ b/hw/i386/acpi-build.c @@ -139,6 +139,8 @@ const struct AcpiGenericAddress x86_nvdimm_acpi_dsmio = { static void init_common_fadt_data(MachineState *ms, Object *o, AcpiFadtData *data) { + X86MachineState *x86ms = X86_MACHINE(ms); + bool smm_enabled = x86_machine_is_smm_enabled(x86ms); uint32_t io = object_property_get_uint(o, ACPI_PM_PROP_PM_IO_BASE, NULL); AmlAddressSpace as = AML_AS_SYSTEM_IO; AcpiFadtData fadt = { @@ -159,12 +161,16 @@ static void init_common_fadt_data(MachineState *ms, Object *o, .rtc_century = RTC_CENTURY, .plvl2_lat = 0xfff /* C2 state not supported */, .plvl3_lat = 0xfff /* C3 state not supported */, - .smi_cmd = ACPI_PORT_SMI_CMD, + .smi_cmd = smm_enabled ? ACPI_PORT_SMI_CMD : 0, .sci_int = object_property_get_uint(o, ACPI_PM_PROP_SCI_INT, NULL), .acpi_enable_cmd = - object_property_get_uint(o, ACPI_PM_PROP_ACPI_ENABLE_CMD, NULL), + smm_enabled ? + object_property_get_uint(o, ACPI_PM_PROP_ACPI_ENABLE_CMD, NULL) : + 0, .acpi_disable_cmd = - object_property_get_uint(o, ACPI_PM_PROP_ACPI_DISABLE_CMD, NULL), + smm_enabled ? + object_property_get_uint(o, ACPI_PM_PROP_ACPI_DISABLE_CMD, NULL) : + 0, .pm1a_evt = { .space_id = as, .bit_width = 4 * 8, .address = io }, .pm1a_cnt = { .space_id = as, .bit_width = 2 * 8, .address = io + 0x04 },