diff mbox series

[2/3] arm64: dts: qcom: sc7180: trogdor: Add labels to charger thermal zone and ADC channel

Message ID 20210219181032.2.I6a426324db3d98d6cfae8adf2598831bb30bba74@changeid (mailing list archive)
State Superseded
Headers show
Series [1/3] arm64: dts: qcom: sc7180: Add lazor rev4 | expand

Commit Message

Matthias Kaehlcke Feb. 20, 2021, 2:10 a.m. UTC
Some revisions of trogdor boards use a thermistor for the charger
temperature which currently isn't supported by the PM6150 ADC
driver. Add labels for the charger thermal zone and ADC channel
to allow the removal of these nodes from affected boards and
avoid the use of bogus temperature values.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---

 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Doug Anderson Feb. 22, 2021, 11:25 p.m. UTC | #1
Hi,

On Fri, Feb 19, 2021 at 6:11 PM Matthias Kaehlcke <mka@chromium.org> wrote:
>
> Some revisions of trogdor boards use a thermistor for the charger
> temperature which currently isn't supported by the PM6150 ADC
> driver. Add labels for the charger thermal zone and ADC channel
> to allow the removal of these nodes from affected boards and
> avoid the use of bogus temperature values.
>
> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> ---
>
>  arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)

Reviewed-by: Douglas Anderson <dianders@chromium.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 07c8b2c926c0..fa996387715b 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -15,7 +15,7 @@ 
 
 / {
 	thermal-zones {
-		charger-thermal {
+		charger_thermal: charger-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 
@@ -706,7 +706,7 @@  &mdss {
 };
 
 &pm6150_adc {
-	charger-thermistor@4f {
+	pm6150_adc_charger_thm: charger-thermistor@4f {
 		reg = <ADC5_AMUX_THM3_100K_PU>;
 		qcom,ratiometric;
 		qcom,hw-settle-time = <200>;
@@ -716,7 +716,7 @@  charger-thermistor@4f {
 &pm6150_adc_tm {
 	status = "okay";
 
-	charger-thermistor@1 {
+	pm6150_adc_tm_charger_thm: charger-thermistor@1 {
 		reg = <1>;
 		io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
 		qcom,ratiometric;