@@ -740,6 +740,7 @@ TEST_BUILTINS_OBJS += test-serve-v2.o
TEST_BUILTINS_OBJS += test-sha1.o
TEST_BUILTINS_OBJS += test-sha256.o
TEST_BUILTINS_OBJS += test-sigchain.o
+TEST_BUILTINS_OBJS += test-simple-ipc.o
TEST_BUILTINS_OBJS += test-strcmp-offset.o
TEST_BUILTINS_OBJS += test-string-list.o
TEST_BUILTINS_OBJS += test-submodule-config.o
new file mode 100644
@@ -0,0 +1,773 @@
+/*
+ * test-simple-ipc.c: verify that the Inter-Process Communication works.
+ */
+
+#include "test-tool.h"
+#include "cache.h"
+#include "strbuf.h"
+#include "simple-ipc.h"
+#include "parse-options.h"
+#include "thread-utils.h"
+#include "strvec.h"
+
+#ifndef SUPPORTS_SIMPLE_IPC
+int cmd__simple_ipc(int argc, const char **argv)
+{
+ die("simple IPC not available on this platform");
+}
+#else
+
+/*
+ * The test daemon defines an "application callback" that supports a
+ * series of commands (see `test_app_cb()`).
+ *
+ * Unknown commands are caught here and we send an error message back
+ * to the client process.
+ */
+static int app__unhandled_command(const char *command,
+ ipc_server_reply_cb *reply_cb,
+ struct ipc_server_reply_data *reply_data)
+{
+ struct strbuf buf = STRBUF_INIT;
+ int ret;
+
+ strbuf_addf(&buf, "unhandled command: %s", command);
+ ret = reply_cb(reply_data, buf.buf, buf.len);
+ strbuf_release(&buf);
+
+ return ret;
+}
+
+/*
+ * Reply with a single very large buffer. This is to ensure that
+ * long response are properly handled -- whether the chunking occurs
+ * in the kernel or in the (probably pkt-line) layer.
+ */
+#define BIG_ROWS (10000)
+static int app__big_command(ipc_server_reply_cb *reply_cb,
+ struct ipc_server_reply_data *reply_data)
+{
+ struct strbuf buf = STRBUF_INIT;
+ int row;
+ int ret;
+
+ for (row = 0; row < BIG_ROWS; row++)
+ strbuf_addf(&buf, "big: %.75d\n", row);
+
+ ret = reply_cb(reply_data, buf.buf, buf.len);
+ strbuf_release(&buf);
+
+ return ret;
+}
+
+/*
+ * Reply with a series of lines. This is to ensure that we can incrementally
+ * compute the response and chunk it to the client.
+ */
+#define CHUNK_ROWS (10000)
+static int app__chunk_command(ipc_server_reply_cb *reply_cb,
+ struct ipc_server_reply_data *reply_data)
+{
+ struct strbuf buf = STRBUF_INIT;
+ int row;
+ int ret;
+
+ for (row = 0; row < CHUNK_ROWS; row++) {
+ strbuf_setlen(&buf, 0);
+ strbuf_addf(&buf, "big: %.75d\n", row);
+ ret = reply_cb(reply_data, buf.buf, buf.len);
+ }
+
+ strbuf_release(&buf);
+
+ return ret;
+}
+
+/*
+ * Slowly reply with a series of lines. This is to model an expensive to
+ * compute chunked response (which might happen if this callback is running
+ * in a thread and is fighting for a lock with other threads).
+ */
+#define SLOW_ROWS (1000)
+#define SLOW_DELAY_MS (10)
+static int app__slow_command(ipc_server_reply_cb *reply_cb,
+ struct ipc_server_reply_data *reply_data)
+{
+ struct strbuf buf = STRBUF_INIT;
+ int row;
+ int ret;
+
+ for (row = 0; row < SLOW_ROWS; row++) {
+ strbuf_setlen(&buf, 0);
+ strbuf_addf(&buf, "big: %.75d\n", row);
+ ret = reply_cb(reply_data, buf.buf, buf.len);
+ sleep_millisec(SLOW_DELAY_MS);
+ }
+
+ strbuf_release(&buf);
+
+ return ret;
+}
+
+/*
+ * The client sent a command followed by a (possibly very) large buffer.
+ */
+static int app__sendbytes_command(const char *received,
+ ipc_server_reply_cb *reply_cb,
+ struct ipc_server_reply_data *reply_data)
+{
+ struct strbuf buf_resp = STRBUF_INIT;
+ const char *p = "?";
+ int len_ballast = 0;
+ int k;
+ int errs = 0;
+ int ret;
+
+ if (skip_prefix(received, "sendbytes ", &p))
+ len_ballast = strlen(p);
+
+ /*
+ * Verify that the ballast is n copies of a single letter.
+ * And that the multi-threaded IO layer didn't cross the streams.
+ */
+ for (k = 1; k < len_ballast; k++)
+ if (p[k] != p[0])
+ errs++;
+
+ if (errs)
+ strbuf_addf(&buf_resp, "errs:%d\n", errs);
+ else
+ strbuf_addf(&buf_resp, "rcvd:%c%08d\n", p[0], len_ballast);
+
+ ret = reply_cb(reply_data, buf_resp.buf, buf_resp.len);
+
+ strbuf_release(&buf_resp);
+
+ return ret;
+}
+
+/*
+ * An arbitrary fixed address to verify that the application instance
+ * data is handled properly.
+ */
+static int my_app_data = 42;
+
+static ipc_server_application_cb test_app_cb;
+
+/*
+ * This is the "application callback" that sits on top of the
+ * "ipc-server". It completely defines the set of commands supported
+ * by this application.
+ */
+static int test_app_cb(void *application_data,
+ const char *command,
+ ipc_server_reply_cb *reply_cb,
+ struct ipc_server_reply_data *reply_data)
+{
+ /*
+ * Verify that we received the application-data that we passed
+ * when we started the ipc-server. (We have several layers of
+ * callbacks calling callbacks and it's easy to get things mixed
+ * up (especially when some are "void*").)
+ */
+ if (application_data != (void*)&my_app_data)
+ BUG("application_cb: application_data pointer wrong");
+
+ if (!strcmp(command, "quit")) {
+ /*
+ * The client sent a "quit" command. This is an async
+ * request for the server to shutdown.
+ *
+ * We DO NOT send the client a response message
+ * (because we have nothing to say and the other
+ * server threads have not yet stopped).
+ *
+ * Tell the ipc-server layer to start shutting down.
+ * This includes: stop listening for new connections
+ * on the socket/pipe and telling all worker threads
+ * to finish/drain their outgoing responses to other
+ * clients.
+ *
+ * This DOES NOT force an immediate sync shutdown.
+ */
+ return SIMPLE_IPC_QUIT;
+ }
+
+ if (!strcmp(command, "ping")) {
+ const char *answer = "pong";
+ return reply_cb(reply_data, answer, strlen(answer));
+ }
+
+ if (!strcmp(command, "big"))
+ return app__big_command(reply_cb, reply_data);
+
+ if (!strcmp(command, "chunk"))
+ return app__chunk_command(reply_cb, reply_data);
+
+ if (!strcmp(command, "slow"))
+ return app__slow_command(reply_cb, reply_data);
+
+ if (starts_with(command, "sendbytes "))
+ return app__sendbytes_command(command, reply_cb, reply_data);
+
+ return app__unhandled_command(command, reply_cb, reply_data);
+}
+
+/*
+ * This process will run as a simple-ipc server and listen for IPC commands
+ * from client processes.
+ */
+static int daemon__run_server(const char *path, int argc, const char **argv)
+{
+ struct ipc_server_opts opts = {
+ .nr_threads = 5
+ };
+
+ const char * const daemon_usage[] = {
+ N_("test-helper simple-ipc run-daemon [<options>"),
+ NULL
+ };
+ struct option daemon_options[] = {
+ OPT_INTEGER(0, "threads", &opts.nr_threads,
+ N_("number of threads in server thread pool")),
+ OPT_END()
+ };
+
+ argc = parse_options(argc, argv, NULL, daemon_options, daemon_usage, 0);
+
+ if (opts.nr_threads < 1)
+ opts.nr_threads = 1;
+
+ /*
+ * Synchronously run the ipc-server. We don't need any application
+ * instance data, so pass an arbitrary pointer (that we'll later
+ * verify made the round trip).
+ */
+ return ipc_server_run(path, &opts, test_app_cb, (void*)&my_app_data);
+}
+
+#ifndef GIT_WINDOWS_NATIVE
+/*
+ * This is adapted from `daemonize()`. Use `fork()` to directly create and
+ * run the daemon in a child process.
+ */
+static int spawn_server(const char *path,
+ const struct ipc_server_opts *opts,
+ pid_t *pid)
+{
+ *pid = fork();
+
+ switch (*pid) {
+ case 0:
+ if (setsid() == -1)
+ error_errno(_("setsid failed"));
+ close(0);
+ close(1);
+ close(2);
+ sanitize_stdfds();
+
+ return ipc_server_run(path, opts, test_app_cb, (void*)&my_app_data);
+
+ case -1:
+ return error_errno(_("could not spawn daemon in the background"));
+
+ default:
+ return 0;
+ }
+}
+#else
+/*
+ * Conceptually like `daemonize()` but different because Windows does not
+ * have `fork(2)`. Spawn a normal Windows child process but without the
+ * limitations of `start_command()` and `finish_command()`.
+ */
+static int spawn_server(const char *path,
+ const struct ipc_server_opts *opts,
+ pid_t *pid)
+{
+ char test_tool_exe[MAX_PATH];
+ struct strvec args = STRVEC_INIT;
+ int in, out;
+
+ GetModuleFileNameA(NULL, test_tool_exe, MAX_PATH);
+
+ in = open("/dev/null", O_RDONLY);
+ out = open("/dev/null", O_WRONLY);
+
+ strvec_push(&args, test_tool_exe);
+ strvec_push(&args, "simple-ipc");
+ strvec_push(&args, "run-daemon");
+ strvec_pushf(&args, "--threads=%d", opts->nr_threads);
+
+ *pid = mingw_spawnvpe(args.v[0], args.v, NULL, NULL, in, out, out);
+ close(in);
+ close(out);
+
+ strvec_clear(&args);
+
+ if (*pid < 0)
+ return error(_("could not spawn daemon in the background"));
+
+ return 0;
+}
+#endif
+
+/*
+ * This is adapted from `wait_or_whine()`. Watch the child process and
+ * let it get started and begin listening for requests on the socket
+ * before reporting our success.
+ */
+static int wait_for_server_startup(const char * path, pid_t pid_child,
+ int max_wait_sec)
+{
+ int status;
+ pid_t pid_seen;
+ enum ipc_active_state s;
+ time_t time_limit, now;
+
+ time(&time_limit);
+ time_limit += max_wait_sec;
+
+ for (;;) {
+ pid_seen = waitpid(pid_child, &status, WNOHANG);
+
+ if (pid_seen == -1)
+ return error_errno(_("waitpid failed"));
+
+ else if (pid_seen == 0) {
+ /*
+ * The child is still running (this should be
+ * the normal case). Try to connect to it on
+ * the socket and see if it is ready for
+ * business.
+ *
+ * If there is another daemon already running,
+ * our child will fail to start (possibly
+ * after a timeout on the lock), but we don't
+ * care (who responds) if the socket is live.
+ */
+ s = ipc_get_active_state(path);
+ if (s == IPC_STATE__LISTENING)
+ return 0;
+
+ time(&now);
+ if (now > time_limit)
+ return error(_("daemon not online yet"));
+
+ continue;
+ }
+
+ else if (pid_seen == pid_child) {
+ /*
+ * The new child daemon process shutdown while
+ * it was starting up, so it is not listening
+ * on the socket.
+ *
+ * Try to ping the socket in the odd chance
+ * that another daemon started (or was already
+ * running) while our child was starting.
+ *
+ * Again, we don't care who services the socket.
+ */
+ s = ipc_get_active_state(path);
+ if (s == IPC_STATE__LISTENING)
+ return 0;
+
+ /*
+ * We don't care about the WEXITSTATUS() nor
+ * any of the WIF*(status) values because
+ * `cmd__simple_ipc()` does the `!!result`
+ * trick on all function return values.
+ *
+ * So it is sufficient to just report the
+ * early shutdown as an error.
+ */
+ return error(_("daemon failed to start"));
+ }
+
+ else
+ return error(_("waitpid is confused"));
+ }
+}
+
+/*
+ * This process will start a simple-ipc server in a background process and
+ * wait for it to become ready. This is like `daemonize()` but gives us
+ * more control and better error reporting (and makes it easier to write
+ * unit tests).
+ */
+static int daemon__start_server(const char *path, int argc, const char **argv)
+{
+ pid_t pid_child;
+ int ret;
+ int max_wait_sec = 60;
+ struct ipc_server_opts opts = {
+ .nr_threads = 5
+ };
+
+ const char * const daemon_usage[] = {
+ N_("test-helper simple-ipc start-daemon [<options>"),
+ NULL
+ };
+
+ struct option daemon_options[] = {
+ OPT_INTEGER(0, "max-wait", &max_wait_sec,
+ N_("seconds to wait for daemon to startup")),
+ OPT_INTEGER(0, "threads", &opts.nr_threads,
+ N_("number of threads in server thread pool")),
+ OPT_END()
+ };
+
+ argc = parse_options(argc, argv, NULL, daemon_options, daemon_usage, 0);
+
+ if (max_wait_sec < 0)
+ max_wait_sec = 0;
+ if (opts.nr_threads < 1)
+ opts.nr_threads = 1;
+
+ /*
+ * Run the actual daemon in a background process.
+ */
+ ret = spawn_server(path, &opts, &pid_child);
+ if (pid_child <= 0)
+ return ret;
+
+ /*
+ * Let the parent wait for the child process to get started
+ * and begin listening for requests on the socket.
+ */
+ ret = wait_for_server_startup(path, pid_child, max_wait_sec);
+
+ return ret;
+}
+
+/*
+ * This process will run a quick probe to see if a simple-ipc server
+ * is active on this path.
+ *
+ * Returns 0 if the server is alive.
+ */
+static int client__probe_server(const char *path)
+{
+ enum ipc_active_state s;
+
+ s = ipc_get_active_state(path);
+ switch (s) {
+ case IPC_STATE__LISTENING:
+ return 0;
+
+ case IPC_STATE__NOT_LISTENING:
+ return error("no server listening at '%s'", path);
+
+ case IPC_STATE__PATH_NOT_FOUND:
+ return error("path not found '%s'", path);
+
+ case IPC_STATE__INVALID_PATH:
+ return error("invalid pipe/socket name '%s'", path);
+
+ case IPC_STATE__OTHER_ERROR:
+ default:
+ return error("other error for '%s'", path);
+ }
+}
+
+/*
+ * Send an IPC command to an already-running server daemon and print the
+ * response.
+ *
+ * argv[2] contains a simple (1 word) command that `test_app_cb()` (in
+ * the daemon process) will understand.
+ */
+static int client__send_ipc(int argc, const char **argv, const char *path)
+{
+ const char *command = argc > 2 ? argv[2] : "(no command)";
+ struct strbuf buf = STRBUF_INIT;
+ struct ipc_client_connect_options options
+ = IPC_CLIENT_CONNECT_OPTIONS_INIT;
+
+ options.wait_if_busy = 1;
+ options.wait_if_not_found = 0;
+
+ if (!ipc_client_send_command(path, &options, command, &buf)) {
+ if (buf.len) {
+ printf("%s\n", buf.buf);
+ fflush(stdout);
+ }
+ strbuf_release(&buf);
+
+ return 0;
+ }
+
+ return error("failed to send '%s' to '%s'", command, path);
+}
+
+/*
+ * Send an IPC command to an already-running server and ask it to
+ * shutdown. "send quit" is an async request and queues a shutdown
+ * event in the server, so we spin and wait here for it to actually
+ * shutdown to make the unit tests a little easier to write.
+ */
+static int client__stop_server(int argc, const char **argv, const char *path)
+{
+ const char *send_quit[] = { argv[0], "send", "quit", NULL };
+ int max_wait_sec = 60;
+ int ret;
+ time_t time_limit, now;
+ enum ipc_active_state s;
+
+ const char * const stop_usage[] = {
+ N_("test-helper simple-ipc stop-daemon [<options>]"),
+ NULL
+ };
+
+ struct option stop_options[] = {
+ OPT_INTEGER(0, "max-wait", &max_wait_sec,
+ N_("seconds to wait for daemon to stop")),
+ OPT_END()
+ };
+
+ argc = parse_options(argc, argv, NULL, stop_options, stop_usage, 0);
+
+ if (max_wait_sec < 0)
+ max_wait_sec = 0;
+
+ time(&time_limit);
+ time_limit += max_wait_sec;
+
+ ret = client__send_ipc(3, send_quit, path);
+ if (ret)
+ return ret;
+
+ for (;;) {
+ sleep_millisec(100);
+
+ s = ipc_get_active_state(path);
+
+ if (s != IPC_STATE__LISTENING) {
+ /*
+ * The socket/pipe is gone and/or has stopped
+ * responding. Lets assume that the daemon
+ * process has exited too.
+ */
+ return 0;
+ }
+
+ time(&now);
+ if (now > time_limit)
+ return error(_("daemon has not shutdown yet"));
+ }
+}
+
+/*
+ * Send an IPC command followed by ballast to confirm that a large
+ * message can be sent and that the kernel or pkt-line layers will
+ * properly chunk it and that the daemon receives the entire message.
+ */
+static int do_sendbytes(int bytecount, char byte, const char *path,
+ const struct ipc_client_connect_options *options)
+{
+ struct strbuf buf_send = STRBUF_INIT;
+ struct strbuf buf_resp = STRBUF_INIT;
+
+ strbuf_addstr(&buf_send, "sendbytes ");
+ strbuf_addchars(&buf_send, byte, bytecount);
+
+ if (!ipc_client_send_command(path, options, buf_send.buf, &buf_resp)) {
+ strbuf_rtrim(&buf_resp);
+ printf("sent:%c%08d %s\n", byte, bytecount, buf_resp.buf);
+ fflush(stdout);
+ strbuf_release(&buf_send);
+ strbuf_release(&buf_resp);
+
+ return 0;
+ }
+
+ return error("client failed to sendbytes(%d, '%c') to '%s'",
+ bytecount, byte, path);
+}
+
+/*
+ * Send an IPC command with ballast to an already-running server daemon.
+ */
+static int client__sendbytes(int argc, const char **argv, const char *path)
+{
+ int bytecount = 1024;
+ char *string = "x";
+ const char * const sendbytes_usage[] = {
+ N_("test-helper simple-ipc sendbytes [<options>]"),
+ NULL
+ };
+ struct option sendbytes_options[] = {
+ OPT_INTEGER(0, "bytecount", &bytecount, N_("number of bytes")),
+ OPT_STRING(0, "byte", &string, N_("byte"), N_("ballast")),
+ OPT_END()
+ };
+ struct ipc_client_connect_options options
+ = IPC_CLIENT_CONNECT_OPTIONS_INIT;
+
+ options.wait_if_busy = 1;
+ options.wait_if_not_found = 0;
+ options.uds_disallow_chdir = 0;
+
+ argc = parse_options(argc, argv, NULL, sendbytes_options, sendbytes_usage, 0);
+
+ return do_sendbytes(bytecount, string[0], path, &options);
+}
+
+struct multiple_thread_data {
+ pthread_t pthread_id;
+ struct multiple_thread_data *next;
+ const char *path;
+ int bytecount;
+ int batchsize;
+ int sum_errors;
+ int sum_good;
+ char letter;
+};
+
+static void *multiple_thread_proc(void *_multiple_thread_data)
+{
+ struct multiple_thread_data *d = _multiple_thread_data;
+ int k;
+ struct ipc_client_connect_options options
+ = IPC_CLIENT_CONNECT_OPTIONS_INIT;
+
+ options.wait_if_busy = 1;
+ options.wait_if_not_found = 0;
+ /*
+ * A multi-threaded client should not be randomly calling chdir().
+ * The test will pass without this restriction because the test is
+ * not otherwise accessing the filesystem, but it makes us honest.
+ */
+ options.uds_disallow_chdir = 1;
+
+ trace2_thread_start("multiple");
+
+ for (k = 0; k < d->batchsize; k++) {
+ if (do_sendbytes(d->bytecount + k, d->letter, d->path, &options))
+ d->sum_errors++;
+ else
+ d->sum_good++;
+ }
+
+ trace2_thread_exit();
+ return NULL;
+}
+
+/*
+ * Start a client-side thread pool. Each thread sends a series of
+ * IPC requests. Each request is on a new connection to the server.
+ */
+static int client__multiple(int argc, const char **argv, const char *path)
+{
+ struct multiple_thread_data *list = NULL;
+ int k;
+ int nr_threads = 5;
+ int bytecount = 1;
+ int batchsize = 10;
+ int sum_join_errors = 0;
+ int sum_thread_errors = 0;
+ int sum_good = 0;
+
+ const char * const multiple_usage[] = {
+ N_("test-helper simple-ipc multiple [<options>]"),
+ NULL
+ };
+ struct option multiple_options[] = {
+ OPT_INTEGER(0, "bytecount", &bytecount, N_("number of bytes")),
+ OPT_INTEGER(0, "threads", &nr_threads, N_("number of threads")),
+ OPT_INTEGER(0, "batchsize", &batchsize, N_("number of requests per thread")),
+ OPT_END()
+ };
+
+ argc = parse_options(argc, argv, NULL, multiple_options, multiple_usage, 0);
+
+ if (bytecount < 1)
+ bytecount = 1;
+ if (nr_threads < 1)
+ nr_threads = 1;
+ if (batchsize < 1)
+ batchsize = 1;
+
+ for (k = 0; k < nr_threads; k++) {
+ struct multiple_thread_data *d = xcalloc(1, sizeof(*d));
+ d->next = list;
+ d->path = path;
+ d->bytecount = bytecount + batchsize*(k/26);
+ d->batchsize = batchsize;
+ d->sum_errors = 0;
+ d->sum_good = 0;
+ d->letter = 'A' + (k % 26);
+
+ if (pthread_create(&d->pthread_id, NULL, multiple_thread_proc, d)) {
+ warning("failed to create thread[%d] skipping remainder", k);
+ free(d);
+ break;
+ }
+
+ list = d;
+ }
+
+ while (list) {
+ struct multiple_thread_data *d = list;
+
+ if (pthread_join(d->pthread_id, NULL))
+ sum_join_errors++;
+
+ sum_thread_errors += d->sum_errors;
+ sum_good += d->sum_good;
+
+ list = d->next;
+ free(d);
+ }
+
+ printf("client (good %d) (join %d), (errors %d)\n",
+ sum_good, sum_join_errors, sum_thread_errors);
+
+ return (sum_join_errors + sum_thread_errors) ? 1 : 0;
+}
+
+int cmd__simple_ipc(int argc, const char **argv)
+{
+ const char *path = "ipc-test";
+
+ if (argc == 2 && !strcmp(argv[1], "SUPPORTS_SIMPLE_IPC"))
+ return 0;
+
+ /*
+ * Use '!!' on all dispatch functions to map from `error()` style
+ * (returns -1) style to `test_must_fail` style (expects 1). This
+ * makes shell error messages less confusing.
+ */
+
+ if (argc == 2 && !strcmp(argv[1], "is-active"))
+ return !!client__probe_server(path);
+
+ if (argc >= 2 && !strcmp(argv[1], "run-daemon"))
+ return !!daemon__run_server(path, argc, argv);
+
+ if (argc >= 2 && !strcmp(argv[1], "start-daemon"))
+ return !!daemon__start_server(path, argc, argv);
+
+ /*
+ * Client commands follow. Ensure a server is running before
+ * going any further.
+ */
+ if (client__probe_server(path))
+ return 1;
+
+ if (argc >= 2 && !strcmp(argv[1], "stop-daemon"))
+ return !!client__stop_server(argc, argv, path);
+
+ if ((argc == 2 || argc == 3) && !strcmp(argv[1], "send"))
+ return !!client__send_ipc(argc, argv, path);
+
+ if (argc >= 2 && !strcmp(argv[1], "sendbytes"))
+ return !!client__sendbytes(argc, argv, path);
+
+ if (argc >= 2 && !strcmp(argv[1], "multiple"))
+ return !!client__multiple(argc, argv, path);
+
+ die("Unhandled argv[1]: '%s'", argv[1]);
+}
+#endif
@@ -64,6 +64,7 @@ static struct test_cmd cmds[] = {
{ "sha1", cmd__sha1 },
{ "sha256", cmd__sha256 },
{ "sigchain", cmd__sigchain },
+ { "simple-ipc", cmd__simple_ipc },
{ "strcmp-offset", cmd__strcmp_offset },
{ "string-list", cmd__string_list },
{ "submodule-config", cmd__submodule_config },
@@ -54,6 +54,7 @@ int cmd__sha1(int argc, const char **argv);
int cmd__oid_array(int argc, const char **argv);
int cmd__sha256(int argc, const char **argv);
int cmd__sigchain(int argc, const char **argv);
+int cmd__simple_ipc(int argc, const char **argv);
int cmd__strcmp_offset(int argc, const char **argv);
int cmd__string_list(int argc, const char **argv);
int cmd__submodule_config(int argc, const char **argv);
new file mode 100755
@@ -0,0 +1,122 @@
+#!/bin/sh
+
+test_description='simple command server'
+
+. ./test-lib.sh
+
+test-tool simple-ipc SUPPORTS_SIMPLE_IPC || {
+ skip_all='simple IPC not supported on this platform'
+ test_done
+}
+
+stop_simple_IPC_server () {
+ test-tool simple-ipc stop-daemon
+}
+
+test_expect_success 'start simple command server' '
+ test_atexit stop_simple_IPC_server &&
+ test-tool simple-ipc start-daemon --threads=8 &&
+ test-tool simple-ipc is-active
+'
+
+test_expect_success 'simple command server' '
+ test-tool simple-ipc send ping >actual &&
+ echo pong >expect &&
+ test_cmp expect actual
+'
+
+test_expect_success 'servers cannot share the same path' '
+ test_must_fail test-tool simple-ipc run-daemon &&
+ test-tool simple-ipc is-active
+'
+
+test_expect_success 'big response' '
+ test-tool simple-ipc send big >actual &&
+ test_line_count -ge 10000 actual &&
+ grep -q "big: [0]*9999\$" actual
+'
+
+test_expect_success 'chunk response' '
+ test-tool simple-ipc send chunk >actual &&
+ test_line_count -ge 10000 actual &&
+ grep -q "big: [0]*9999\$" actual
+'
+
+test_expect_success 'slow response' '
+ test-tool simple-ipc send slow >actual &&
+ test_line_count -ge 100 actual &&
+ grep -q "big: [0]*99\$" actual
+'
+
+# Send an IPC with n=100,000 bytes of ballast. This should be large enough
+# to force both the kernel and the pkt-line layer to chunk the message to the
+# daemon and for the daemon to receive it in chunks.
+#
+test_expect_success 'sendbytes' '
+ test-tool simple-ipc sendbytes --bytecount=100000 --byte=A >actual &&
+ grep "sent:A00100000 rcvd:A00100000" actual
+'
+
+# Start a series of <threads> client threads that each make <batchsize>
+# IPC requests to the server. Each (<threads> * <batchsize>) request
+# will open a new connection to the server and randomly bind to a server
+# thread. Each client thread exits after completing its batch. So the
+# total number of live client threads will be smaller than the total.
+# Each request will send a message containing at least <bytecount> bytes
+# of ballast. (Responses are small.)
+#
+# The purpose here is to test threading in the server and responding to
+# many concurrent client requests (regardless of whether they come from
+# 1 client process or many). And to test that the server side of the
+# named pipe/socket is stable. (On Windows this means that the server
+# pipe is properly recycled.)
+#
+# On Windows it also lets us adjust the connection timeout in the
+# `ipc_client_send_command()`.
+#
+# Note it is easy to drive the system into failure by requesting an
+# insane number of threads on client or server and/or increasing the
+# per-thread batchsize or the per-request bytecount (ballast).
+# On Windows these failures look like "pipe is busy" errors.
+# So I've chosen fairly conservative values for now.
+#
+# We expect output of the form "sent:<letter><length> ..."
+# With terms (7, 19, 13) we expect:
+# <letter> in [A-G]
+# <length> in [19+0 .. 19+(13-1)]
+# and (7 * 13) successful responses.
+#
+test_expect_success 'stress test threads' '
+ test-tool simple-ipc multiple \
+ --threads=7 \
+ --bytecount=19 \
+ --batchsize=13 \
+ >actual &&
+ test_line_count = 92 actual &&
+ grep "good 91" actual &&
+ grep "sent:A" <actual >actual_a &&
+ cat >expect_a <<-EOF &&
+ sent:A00000019 rcvd:A00000019
+ sent:A00000020 rcvd:A00000020
+ sent:A00000021 rcvd:A00000021
+ sent:A00000022 rcvd:A00000022
+ sent:A00000023 rcvd:A00000023
+ sent:A00000024 rcvd:A00000024
+ sent:A00000025 rcvd:A00000025
+ sent:A00000026 rcvd:A00000026
+ sent:A00000027 rcvd:A00000027
+ sent:A00000028 rcvd:A00000028
+ sent:A00000029 rcvd:A00000029
+ sent:A00000030 rcvd:A00000030
+ sent:A00000031 rcvd:A00000031
+ EOF
+ test_cmp expect_a actual_a
+'
+
+test_expect_success 'stop-daemon works' '
+ test-tool simple-ipc stop-daemon &&
+ test_must_fail test-tool simple-ipc is-active &&
+ test_must_fail test-tool simple-ipc send ping
+'
+
+test_done