| Message ID | 20210302085130.2558297-1-joe_hung@ilitek.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v4,1/2] dt-bindings: input: touchscreen: ilitek_ts_i2c: Add bindings | expand |
On Tue, 02 Mar 2021 16:51:29 +0800, Joe Hung wrote: > Add binding documentation for ILITEK touch devices. > > Signed-off-by: Joe Hung <joe_hung@ilitek.com> > --- > Changes in v4: > - Change IRQ flag to level interrupt > - Add support for common touchscreen-related properties > - Modify reset gpio to active low > - Modify irq type to LEVEL_LOW > - Add compatible for Lego series ICs > > Changes in v3: > - Add include header in examples, and pass the dt binding check > > Changes in v2: > - Convert to DT schema format > - Using interrupts instead of irq-gpios > > .../input/touchscreen/ilitek_ts_i2c.yaml | 68 +++++++++++++++++++ > 1 file changed, 68 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml:60:1: [error] syntax error: found character '\t' that cannot start any token (syntax) dtschema/dtc warnings/errors: make[1]: *** Deleting file 'Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.example.dts' Traceback (most recent call last): File "/usr/local/bin/dt-extract-example", line 45, in <module> binding = yaml.load(open(args.yamlfile, encoding='utf-8').read()) File "/usr/local/lib/python3.8/dist-packages/ruamel/yaml/main.py", line 343, in load return constructor.get_single_data() File "/usr/local/lib/python3.8/dist-packages/ruamel/yaml/constructor.py", line 111, in get_single_data node = self.composer.get_single_node() File "_ruamel_yaml.pyx", line 706, in _ruamel_yaml.CParser.get_single_node File "_ruamel_yaml.pyx", line 724, in _ruamel_yaml.CParser._compose_document File "_ruamel_yaml.pyx", line 775, in _ruamel_yaml.CParser._compose_node File "_ruamel_yaml.pyx", line 889, in _ruamel_yaml.CParser._compose_mapping_node File "_ruamel_yaml.pyx", line 773, in _ruamel_yaml.CParser._compose_node File "_ruamel_yaml.pyx", line 848, in _ruamel_yaml.CParser._compose_sequence_node File "_ruamel_yaml.pyx", line 904, in _ruamel_yaml.CParser._parse_next_event ruamel.yaml.scanner.ScannerError: while scanning a block scalar in "<unicode string>", line 53, column 5 found a tab character where an indentation space is expected in "<unicode string>", line 60, column 1 make[1]: *** [Documentation/devicetree/bindings/Makefile:20: Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.example.dts] Error 1 make[1]: *** Waiting for unfinished jobs.... ./Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml: while scanning a block scalar in "<unicode string>", line 53, column 5 found a tab character where an indentation space is expected in "<unicode string>", line 60, column 1 /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml: ignoring, error parsing file warning: no schema found in file: ./Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml make: *** [Makefile:1380: dt_binding_check] Error 2 See https://patchwork.ozlabs.org/patch/1446274 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
Hello Rob, Sorry, I think I ran dt_bindin_check mistakenly. Error should be corrected in v5 shortly. On Wed, 03 Mar 2021 17:14:36 -0600, Rob Herring wrote: > On Tue, 02 Mar 2021 16:51:29 +0800, Joe Hung wrote: > > Add binding documentation for ILITEK touch devices. > > > > Signed-off-by: Joe Hung <joe_hung@ilitek.com> > > --- > > Changes in v4: > > - Change IRQ flag to level interrupt > > - Add support for common touchscreen-related properties > > - Modify reset gpio to active low > > - Modify irq type to LEVEL_LOW > > - Add compatible for Lego series ICs > > > > Changes in v3: > > - Add include header in examples, and pass the dt binding check > > > > Changes in v2: > > - Convert to DT schema format > > - Using interrupts instead of irq-gpios > > > > .../input/touchscreen/ilitek_ts_i2c.yaml | 68 +++++++++++++++++++ > > 1 file changed, 68 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml > > > > My bot found errors running 'make dt_binding_check' on your patch: > > yamllint warnings/errors: > ./Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml:60:1: [error] syntax error: found character '\t' that cannot start any token (syntax) > > dtschema/dtc warnings/errors: > make[1]: *** Deleting file 'Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.example.dts' > Traceback (most recent call last): > File "/usr/local/bin/dt-extract-example", line 45, in <module> > binding = yaml.load(open(args.yamlfile, encoding='utf-8').read()) > File "/usr/local/lib/python3.8/dist-packages/ruamel/yaml/main.py", line 343, in load > return constructor.get_single_data() > File "/usr/local/lib/python3.8/dist-packages/ruamel/yaml/constructor.py", line 111, in get_single_data > node = self.composer.get_single_node() > File "_ruamel_yaml.pyx", line 706, in _ruamel_yaml.CParser.get_single_node > File "_ruamel_yaml.pyx", line 724, in _ruamel_yaml.CParser._compose_document > File "_ruamel_yaml.pyx", line 775, in _ruamel_yaml.CParser._compose_node > File "_ruamel_yaml.pyx", line 889, in _ruamel_yaml.CParser._compose_mapping_node > File "_ruamel_yaml.pyx", line 773, in _ruamel_yaml.CParser._compose_node > File "_ruamel_yaml.pyx", line 848, in _ruamel_yaml.CParser._compose_sequence_node > File "_ruamel_yaml.pyx", line 904, in _ruamel_yaml.CParser._parse_next_event > ruamel.yaml.scanner.ScannerError: while scanning a block scalar > in "<unicode string>", line 53, column 5 > found a tab character where an indentation space is expected > in "<unicode string>", line 60, column 1 > make[1]: *** [Documentation/devicetree/bindings/Makefile:20: Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.example.dts] Error 1 > make[1]: *** Waiting for unfinished jobs.... > ./Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml: while scanning a block scalar > in "<unicode string>", line 53, column 5 > found a tab character where an indentation space is expected > in "<unicode string>", line 60, column 1 > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml: ignoring, error parsing file > warning: no schema found in file: ./Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml > make: *** [Makefile:1380: dt_binding_check] Error 2 > > See https://patchwork.ozlabs.org/patch/1446274 > > This check can fail if there are any dependencies. The base for a patch > series is generally the most recent rc1. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit. Thank you very much. -- Joe Hung
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml new file mode 100644 index 000000000000..7fe7ee8a8b20 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/ilitek_ts_i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek I2C Touchscreen Controller + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - ilitek,ili2130 + - ilitek,ili2131 + - ilitek,ili2132 + - ilitek,ili2316 + - ilitek,ili2322 + - ilitek,ili2323 + - ilitek,ili2326 + - ilitek,ili2520 + - ilitek,ili2521 + reg: + const: 0x41 + interrupts: + maxItems: 1 + reset-gpios: + maxItems: 1 + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + + wakeup-source: + type: boolean + description: touchscreen can be used as a wakeup source. + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - reset-gpios + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@41 { + compatible = "ilitek,ili2520"; + reg = <0x41>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + + touchscreen-inverted-y; + }; + };
Add binding documentation for ILITEK touch devices. Signed-off-by: Joe Hung <joe_hung@ilitek.com> --- Changes in v4: - Change IRQ flag to level interrupt - Add support for common touchscreen-related properties - Modify reset gpio to active low - Modify irq type to LEVEL_LOW - Add compatible for Lego series ICs Changes in v3: - Add include header in examples, and pass the dt binding check Changes in v2: - Convert to DT schema format - Using interrupts instead of irq-gpios .../input/touchscreen/ilitek_ts_i2c.yaml | 68 +++++++++++++++++++ 1 file changed, 68 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml -- 2.25.1