diff mbox series

ALSA: usb-audio: Disable USB autosuspend properly in setup_disable_autosuspend()

Message ID 20210304043419.287191-1-kai.heng.feng@canonical.com (mailing list archive)
State Accepted
Commit 9799110825dba087c2bdce886977cf84dada2005
Headers show
Series ALSA: usb-audio: Disable USB autosuspend properly in setup_disable_autosuspend() | expand

Commit Message

Kai-Heng Feng March 4, 2021, 4:34 a.m. UTC
Rear audio on Lenovo ThinkStation P620 stops working after commit
1965c4364bdd ("ALSA: usb-audio: Disable autosuspend for Lenovo
ThinkStation P620"):
[    6.013526] usbcore: registered new interface driver snd-usb-audio
[    6.023064] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
[    6.023083] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
[    6.023090] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
[    6.023098] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
[    6.023103] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
[    6.023110] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
[    6.045846] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
[    6.045866] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
[    6.045877] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
[    6.045886] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
[    6.045894] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
[    6.045908] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4

I overlooked the issue because when I was working on the said commit,
only the front audio is tested. Apology for that.

Changing supports_autosuspend in driver is too late for disabling
autosuspend, because it was already used by USB probe routine, so it can
break the balance on the following code that depends on
supports_autosuspend.

Fix it by using usb_disable_autosuspend() helper, and balance the
suspend count in disconnect callback.

Fixes: 1965c4364bdd ("ALSA: usb-audio: Disable autosuspend for Lenovo ThinkStation P620")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
 sound/usb/card.c     | 5 +++++
 sound/usb/quirks.c   | 2 +-
 sound/usb/usbaudio.h | 1 +
 3 files changed, 7 insertions(+), 1 deletion(-)

Comments

Takashi Iwai March 4, 2021, 8:10 a.m. UTC | #1
On Thu, 04 Mar 2021 05:34:16 +0100,
Kai-Heng Feng wrote:
> 
> Rear audio on Lenovo ThinkStation P620 stops working after commit
> 1965c4364bdd ("ALSA: usb-audio: Disable autosuspend for Lenovo
> ThinkStation P620"):
> [    6.013526] usbcore: registered new interface driver snd-usb-audio
> [    6.023064] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
> [    6.023083] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
> [    6.023090] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
> [    6.023098] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
> [    6.023103] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
> [    6.023110] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
> [    6.045846] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
> [    6.045866] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
> [    6.045877] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
> [    6.045886] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
> [    6.045894] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
> [    6.045908] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
> 
> I overlooked the issue because when I was working on the said commit,
> only the front audio is tested. Apology for that.
> 
> Changing supports_autosuspend in driver is too late for disabling
> autosuspend, because it was already used by USB probe routine, so it can
> break the balance on the following code that depends on
> supports_autosuspend.
> 
> Fix it by using usb_disable_autosuspend() helper, and balance the
> suspend count in disconnect callback.
> 
> Fixes: 1965c4364bdd ("ALSA: usb-audio: Disable autosuspend for Lenovo ThinkStation P620")
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>

Thanks, applied.


Takashi
Joakim Tjernlund March 4, 2021, 9:50 a.m. UTC | #2
On Thu, 2021-03-04 at 12:34 +0800, Kai-Heng Feng wrote:
> Rear audio on Lenovo ThinkStation P620 stops working after commit
> 1965c4364bdd ("ALSA: usb-audio: Disable autosuspend for Lenovo
> ThinkStation P620"):
> [    6.013526] usbcore: registered new interface driver snd-usb-audio
> [    6.023064] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
> [    6.023083] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
> [    6.023090] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
> [    6.023098] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
> [    6.023103] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
> [    6.023110] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
> [    6.045846] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
> [    6.045866] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
> [    6.045877] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
> [    6.045886] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
> [    6.045894] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
> [    6.045908] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
> 
> I overlooked the issue because when I was working on the said commit,
> only the front audio is tested. Apology for that.
> 
> Changing supports_autosuspend in driver is too late for disabling
> autosuspend, because it was already used by USB probe routine, so it can
> break the balance on the following code that depends on
> supports_autosuspend.
> 
> Fix it by using usb_disable_autosuspend() helper, and balance the
> suspend count in disconnect callback.
> 
> Fixes: 1965c4364bdd ("ALSA: usb-audio: Disable autosuspend for Lenovo ThinkStation P620")
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>

I got an report from a co-worker who has no USB sound from a Lenovo ThinkPad in a Ultra Dock.
USB HS is connected to Dock USB jack.
Could this be the same problem?

 Jocke
Kai-Heng Feng March 4, 2021, 10:04 a.m. UTC | #3
Hi Joakim,

On Thu, Mar 4, 2021 at 5:50 PM Joakim Tjernlund
<Joakim.Tjernlund@infinera.com> wrote:
>
> On Thu, 2021-03-04 at 12:34 +0800, Kai-Heng Feng wrote:
> > Rear audio on Lenovo ThinkStation P620 stops working after commit
> > 1965c4364bdd ("ALSA: usb-audio: Disable autosuspend for Lenovo
> > ThinkStation P620"):
> > [    6.013526] usbcore: registered new interface driver snd-usb-audio
> > [    6.023064] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
> > [    6.023083] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
> > [    6.023090] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
> > [    6.023098] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
> > [    6.023103] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
> > [    6.023110] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
> > [    6.045846] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
> > [    6.045866] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
> > [    6.045877] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
> > [    6.045886] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
> > [    6.045894] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1
> > [    6.045908] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
> >
> > I overlooked the issue because when I was working on the said commit,
> > only the front audio is tested. Apology for that.
> >
> > Changing supports_autosuspend in driver is too late for disabling
> > autosuspend, because it was already used by USB probe routine, so it can
> > break the balance on the following code that depends on
> > supports_autosuspend.
> >
> > Fix it by using usb_disable_autosuspend() helper, and balance the
> > suspend count in disconnect callback.
> >
> > Fixes: 1965c4364bdd ("ALSA: usb-audio: Disable autosuspend for Lenovo ThinkStation P620")
> > Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
>
> I got an report from a co-worker who has no USB sound from a Lenovo ThinkPad in a Ultra Dock.
> USB HS is connected to Dock USB jack.
> Could this be the same problem?

It's a different issue. Please file a separate bug report.

Kai-Heng

>
>  Jocke
diff mbox series

Patch

diff --git a/sound/usb/card.c b/sound/usb/card.c
index 85ed8507e41a..08c794883299 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -830,6 +830,8 @@  static int usb_audio_probe(struct usb_interface *intf,
 		snd_media_device_create(chip, intf);
 	}
 
+	chip->quirk_type = quirk->type;
+
 	usb_chip[chip->index] = chip;
 	chip->intf[chip->num_interfaces] = intf;
 	chip->num_interfaces++;
@@ -912,6 +914,9 @@  static void usb_audio_disconnect(struct usb_interface *intf)
 	} else {
 		mutex_unlock(&register_mutex);
 	}
+
+	if (chip->quirk_type & QUIRK_SETUP_DISABLE_AUTOSUSPEND)
+		usb_enable_autosuspend(interface_to_usbdev(intf));
 }
 
 /* lock the shutdown (disconnect) task and autoresume */
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 9ba4682ebc48..ef5ee899db26 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -547,7 +547,7 @@  static int setup_disable_autosuspend(struct snd_usb_audio *chip,
 				       struct usb_driver *driver,
 				       const struct snd_usb_audio_quirk *quirk)
 {
-	driver->supports_autosuspend = 0;
+	usb_disable_autosuspend(interface_to_usbdev(iface));
 	return 1;	/* Continue with creating streams and mixer */
 }
 
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 215c1771dd57..60b9dd7df6bb 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -27,6 +27,7 @@  struct snd_usb_audio {
 	struct snd_card *card;
 	struct usb_interface *intf[MAX_CARD_INTERFACES];
 	u32 usb_id;
+	uint16_t quirk_type;
 	struct mutex mutex;
 	unsigned int system_suspend;
 	atomic_t active;