mbox series

[net-next,0/7] bnxt_en: Error recovery improvements.

Message ID 1616396925-16596-1-git-send-email-michael.chan@broadcom.com (mailing list archive)
Headers show
Series bnxt_en: Error recovery improvements. | expand

Message

Michael Chan March 22, 2021, 7:08 a.m. UTC
This series contains some improvements for error recovery.  The main
changes are:

1. Keep better track of the health register mappings with the
"status_reliable" flag.

2. Don't wait for firmware responses if firmware is not healthy.

3. Better retry logic of the first firmware message.

4. Set the proper flag early to let the RDMA driver know that firmware
reset has been detected.

Edwin Peer (1):
  bnxt_en: don't fake firmware response success when PCI is disabled

Michael Chan (3):
  bnxt_en: Improve the status_reliable flag in bp->fw_health.
  bnxt_en: Set BNXT_STATE_FW_RESET_DET flag earlier for the RDMA driver.
  bnxt_en: Enhance retry of the first message to the firmware.

Pavan Chebbi (1):
  bnxt_en: Improve wait for firmware commands completion

Scott Branden (1):
  bnxt_en: check return value of bnxt_hwrm_func_resc_qcaps

Vasundhara Volam (1):
  bnxt_en: Remove the read of BNXT_FW_RESET_INPROG_REG after firmware
    reset.

 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 108 +++++++++++++++-------
 drivers/net/ethernet/broadcom/bnxt/bnxt.h |   9 ++
 2 files changed, 82 insertions(+), 35 deletions(-)

Comments

patchwork-bot+netdevbpf@kernel.org March 22, 2021, 8:10 p.m. UTC | #1
Hello:

This series was applied to netdev/net-next.git (refs/heads/master):

On Mon, 22 Mar 2021 03:08:38 -0400 you wrote:
> This series contains some improvements for error recovery.  The main
> changes are:
> 
> 1. Keep better track of the health register mappings with the
> "status_reliable" flag.
> 
> 2. Don't wait for firmware responses if firmware is not healthy.
> 
> [...]

Here is the summary with links:
  - [net-next,1/7] bnxt_en: Improve the status_reliable flag in bp->fw_health.
    https://git.kernel.org/netdev/net-next/c/43a440c4007b
  - [net-next,2/7] bnxt_en: Improve wait for firmware commands completion
    https://git.kernel.org/netdev/net-next/c/80a9641f09f8
  - [net-next,3/7] bnxt_en: don't fake firmware response success when PCI is disabled
    https://git.kernel.org/netdev/net-next/c/a2f3835cc68a
  - [net-next,4/7] bnxt_en: check return value of bnxt_hwrm_func_resc_qcaps
    https://git.kernel.org/netdev/net-next/c/15a7deb89549
  - [net-next,5/7] bnxt_en: Set BNXT_STATE_FW_RESET_DET flag earlier for the RDMA driver.
    https://git.kernel.org/netdev/net-next/c/2924ad95cb51
  - [net-next,6/7] bnxt_en: Remove the read of BNXT_FW_RESET_INPROG_REG after firmware reset.
    https://git.kernel.org/netdev/net-next/c/bae8a00379f4
  - [net-next,7/7] bnxt_en: Enhance retry of the first message to the firmware.
    https://git.kernel.org/netdev/net-next/c/861aae786f2f

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html