| Message ID | 20210322140152.101709-2-jagan@amarulasolutions.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm: sun4i: dsi: Convert drm bridge | expand |
Hi Jagan, Thank you for the patch. On Mon, Mar 22, 2021 at 07:31:49PM +0530, Jagan Teki wrote: > Replace of_drm_find_panel with drm_of_find_panel_or_bridge > for finding panel, this indeed help to find the bridge if > bridge support added. > > Added NULL in bridge argument, same will replace with bridge > parameter once bridge supported. > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Looks good, there should be no functional change. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > Changes for v4, v3: > - none > > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 11 ++++++++--- > 1 file changed, 8 insertions(+), 3 deletions(-) > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > index 4f5efcace68e..2e9e7b2d4145 100644 > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > @@ -21,6 +21,7 @@ > > #include <drm/drm_atomic_helper.h> > #include <drm/drm_mipi_dsi.h> > +#include <drm/drm_of.h> > #include <drm/drm_panel.h> > #include <drm/drm_print.h> > #include <drm/drm_probe_helper.h> > @@ -963,10 +964,14 @@ static int sun6i_dsi_attach(struct mipi_dsi_host *host, > struct mipi_dsi_device *device) > { > struct sun6i_dsi *dsi = host_to_sun6i_dsi(host); > - struct drm_panel *panel = of_drm_find_panel(device->dev.of_node); > + struct drm_panel *panel; > + int ret; > + > + ret = drm_of_find_panel_or_bridge(dsi->dev->of_node, 0, 0, > + &panel, NULL); > + if (ret) > + return ret; > > - if (IS_ERR(panel)) > - return PTR_ERR(panel); > if (!dsi->drm || !dsi->drm->registered) > return -EPROBE_DEFER; >
On 3/23/21 5:53 PM, Laurent Pinchart wrote: > Hi Jagan, > > Thank you for the patch. > > On Mon, Mar 22, 2021 at 07:31:49PM +0530, Jagan Teki wrote: >> Replace of_drm_find_panel with drm_of_find_panel_or_bridge >> for finding panel, this indeed help to find the bridge if >> bridge support added. >> >> Added NULL in bridge argument, same will replace with bridge >> parameter once bridge supported. >> >> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > Looks good, there should be no functional change. Actually this breaks all existing users of this driver, see below. > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > >> --- >> Changes for v4, v3: >> - none >> >> drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 11 ++++++++--- >> 1 file changed, 8 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c >> index 4f5efcace68e..2e9e7b2d4145 100644 >> --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c >> +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c >> @@ -21,6 +21,7 @@ >> >> #include <drm/drm_atomic_helper.h> >> #include <drm/drm_mipi_dsi.h> >> +#include <drm/drm_of.h> >> #include <drm/drm_panel.h> >> #include <drm/drm_print.h> >> #include <drm/drm_probe_helper.h> >> @@ -963,10 +964,14 @@ static int sun6i_dsi_attach(struct mipi_dsi_host *host, >> struct mipi_dsi_device *device) >> { >> struct sun6i_dsi *dsi = host_to_sun6i_dsi(host); >> - struct drm_panel *panel = of_drm_find_panel(device->dev.of_node); This is using the OF node of the DSI device, which is a direct child of the DSI host's OF node. There is no OF graph involved. >> + struct drm_panel *panel; >> + int ret; >> + >> + ret = drm_of_find_panel_or_bridge(dsi->dev->of_node, 0, 0, >> + &panel, NULL); However, this function expects to find the panel using OF graph. This does not work with existing device trees (PinePhone, PineTab) which do not use OF graph to connect the panel. And it cannot work, because the DSI host's binding specifies a single port: the input port from the display engine. Regards, Samuel >> + if (ret) >> + return ret; >> >> - if (IS_ERR(panel)) >> - return PTR_ERR(panel); >> if (!dsi->drm || !dsi->drm->registered) >> return -EPROBE_DEFER; >> >
On Wed, Mar 24, 2021 at 8:18 AM Samuel Holland <samuel@sholland.org> wrote: > > On 3/23/21 5:53 PM, Laurent Pinchart wrote: > > Hi Jagan, > > > > Thank you for the patch. > > > > On Mon, Mar 22, 2021 at 07:31:49PM +0530, Jagan Teki wrote: > >> Replace of_drm_find_panel with drm_of_find_panel_or_bridge > >> for finding panel, this indeed help to find the bridge if > >> bridge support added. > >> > >> Added NULL in bridge argument, same will replace with bridge > >> parameter once bridge supported. > >> > >> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > > > Looks good, there should be no functional change. > > Actually this breaks all existing users of this driver, see below. > > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > >> --- > >> Changes for v4, v3: > >> - none > >> > >> drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 11 ++++++++--- > >> 1 file changed, 8 insertions(+), 3 deletions(-) > >> > >> diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > >> index 4f5efcace68e..2e9e7b2d4145 100644 > >> --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > >> +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > >> @@ -21,6 +21,7 @@ > >> > >> #include <drm/drm_atomic_helper.h> > >> #include <drm/drm_mipi_dsi.h> > >> +#include <drm/drm_of.h> > >> #include <drm/drm_panel.h> > >> #include <drm/drm_print.h> > >> #include <drm/drm_probe_helper.h> > >> @@ -963,10 +964,14 @@ static int sun6i_dsi_attach(struct mipi_dsi_host *host, > >> struct mipi_dsi_device *device) > >> { > >> struct sun6i_dsi *dsi = host_to_sun6i_dsi(host); > >> - struct drm_panel *panel = of_drm_find_panel(device->dev.of_node); > > This is using the OF node of the DSI device, which is a direct child of > the DSI host's OF node. There is no OF graph involved. > > >> + struct drm_panel *panel; > >> + int ret; > >> + > >> + ret = drm_of_find_panel_or_bridge(dsi->dev->of_node, 0, 0, > >> + &panel, NULL); > > However, this function expects to find the panel using OF graph. This > does not work with existing device trees (PinePhone, PineTab) which do > not use OF graph to connect the panel. And it cannot work, because the > DSI host's binding specifies a single port: the input port from the > display engine. Thanks for noticing this. I did understand your point and yes, I did mention the updated pipeline in previous versions and forgot to add it to this series. Here is the updated pipeline to make it work: https://patchwork.kernel.org/project/dri-devel/patch/20190524104252.20236-1-jagan@amarulasolutions.com/ Let me know your comments on this, so I will add a patch for the above-affected DTS files. Jagan.
Hi Jagan, On Wed, Mar 24, 2021 at 02:44:57PM +0530, Jagan Teki wrote: > On Wed, Mar 24, 2021 at 8:18 AM Samuel Holland wrote: > > On 3/23/21 5:53 PM, Laurent Pinchart wrote: > > > On Mon, Mar 22, 2021 at 07:31:49PM +0530, Jagan Teki wrote: > > >> Replace of_drm_find_panel with drm_of_find_panel_or_bridge > > >> for finding panel, this indeed help to find the bridge if > > >> bridge support added. > > >> > > >> Added NULL in bridge argument, same will replace with bridge > > >> parameter once bridge supported. > > >> > > >> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > > > > > Looks good, there should be no functional change. > > > > Actually this breaks all existing users of this driver, see below. > > > > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > > >> --- > > >> Changes for v4, v3: > > >> - none > > >> > > >> drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 11 ++++++++--- > > >> 1 file changed, 8 insertions(+), 3 deletions(-) > > >> > > >> diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > >> index 4f5efcace68e..2e9e7b2d4145 100644 > > >> --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > >> +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > >> @@ -21,6 +21,7 @@ > > >> > > >> #include <drm/drm_atomic_helper.h> > > >> #include <drm/drm_mipi_dsi.h> > > >> +#include <drm/drm_of.h> > > >> #include <drm/drm_panel.h> > > >> #include <drm/drm_print.h> > > >> #include <drm/drm_probe_helper.h> > > >> @@ -963,10 +964,14 @@ static int sun6i_dsi_attach(struct mipi_dsi_host *host, > > >> struct mipi_dsi_device *device) > > >> { > > >> struct sun6i_dsi *dsi = host_to_sun6i_dsi(host); > > >> - struct drm_panel *panel = of_drm_find_panel(device->dev.of_node); > > > > This is using the OF node of the DSI device, which is a direct child of > > the DSI host's OF node. There is no OF graph involved. > > > > >> + struct drm_panel *panel; > > >> + int ret; > > >> + > > >> + ret = drm_of_find_panel_or_bridge(dsi->dev->of_node, 0, 0, > > >> + &panel, NULL); > > > > However, this function expects to find the panel using OF graph. This > > does not work with existing device trees (PinePhone, PineTab) which do > > not use OF graph to connect the panel. And it cannot work, because the > > DSI host's binding specifies a single port: the input port from the > > display engine. > > Thanks for noticing this. I did understand your point and yes, I did > mention the updated pipeline in previous versions and forgot to add it > to this series. > > Here is the updated pipeline to make it work: > > https://patchwork.kernel.org/project/dri-devel/patch/20190524104252.20236-1-jagan@amarulasolutions.com/ > > Let me know your comments on this, so I will add a patch for the > above-affected DTS files. DT is an ABI, we need to ensure backward compatibility. Changes in kernel drivers can't break devices that have an old DT.
Hi Laurent, On Wed, Mar 24, 2021 at 3:09 PM Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > > Hi Jagan, > > On Wed, Mar 24, 2021 at 02:44:57PM +0530, Jagan Teki wrote: > > On Wed, Mar 24, 2021 at 8:18 AM Samuel Holland wrote: > > > On 3/23/21 5:53 PM, Laurent Pinchart wrote: > > > > On Mon, Mar 22, 2021 at 07:31:49PM +0530, Jagan Teki wrote: > > > >> Replace of_drm_find_panel with drm_of_find_panel_or_bridge > > > >> for finding panel, this indeed help to find the bridge if > > > >> bridge support added. > > > >> > > > >> Added NULL in bridge argument, same will replace with bridge > > > >> parameter once bridge supported. > > > >> > > > >> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > > > > > > > Looks good, there should be no functional change. > > > > > > Actually this breaks all existing users of this driver, see below. > > > > > > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > > > > >> --- > > > >> Changes for v4, v3: > > > >> - none > > > >> > > > >> drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 11 ++++++++--- > > > >> 1 file changed, 8 insertions(+), 3 deletions(-) > > > >> > > > >> diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > >> index 4f5efcace68e..2e9e7b2d4145 100644 > > > >> --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > >> +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > >> @@ -21,6 +21,7 @@ > > > >> > > > >> #include <drm/drm_atomic_helper.h> > > > >> #include <drm/drm_mipi_dsi.h> > > > >> +#include <drm/drm_of.h> > > > >> #include <drm/drm_panel.h> > > > >> #include <drm/drm_print.h> > > > >> #include <drm/drm_probe_helper.h> > > > >> @@ -963,10 +964,14 @@ static int sun6i_dsi_attach(struct mipi_dsi_host *host, > > > >> struct mipi_dsi_device *device) > > > >> { > > > >> struct sun6i_dsi *dsi = host_to_sun6i_dsi(host); > > > >> - struct drm_panel *panel = of_drm_find_panel(device->dev.of_node); > > > > > > This is using the OF node of the DSI device, which is a direct child of > > > the DSI host's OF node. There is no OF graph involved. > > > > > > >> + struct drm_panel *panel; > > > >> + int ret; > > > >> + > > > >> + ret = drm_of_find_panel_or_bridge(dsi->dev->of_node, 0, 0, > > > >> + &panel, NULL); > > > > > > However, this function expects to find the panel using OF graph. This > > > does not work with existing device trees (PinePhone, PineTab) which do > > > not use OF graph to connect the panel. And it cannot work, because the > > > DSI host's binding specifies a single port: the input port from the > > > display engine. > > > > Thanks for noticing this. I did understand your point and yes, I did > > mention the updated pipeline in previous versions and forgot to add it > > to this series. > > > > Here is the updated pipeline to make it work: > > > > https://patchwork.kernel.org/project/dri-devel/patch/20190524104252.20236-1-jagan@amarulasolutions.com/ > > > > Let me know your comments on this, so I will add a patch for the > > above-affected DTS files. > > DT is an ABI, we need to ensure backward compatibility. Changes in > kernel drivers can't break devices that have an old DT. Thanks for your point. So, we need to choose APIs that would compatible with the old DT and new DT changes. Am I correct? Jagan.
Hi Jagan, On Wed, Mar 24, 2021 at 03:19:10PM +0530, Jagan Teki wrote: > On Wed, Mar 24, 2021 at 3:09 PM Laurent Pinchart wrote: > > On Wed, Mar 24, 2021 at 02:44:57PM +0530, Jagan Teki wrote: > > > On Wed, Mar 24, 2021 at 8:18 AM Samuel Holland wrote: > > > > On 3/23/21 5:53 PM, Laurent Pinchart wrote: > > > > > On Mon, Mar 22, 2021 at 07:31:49PM +0530, Jagan Teki wrote: > > > > >> Replace of_drm_find_panel with drm_of_find_panel_or_bridge > > > > >> for finding panel, this indeed help to find the bridge if > > > > >> bridge support added. > > > > >> > > > > >> Added NULL in bridge argument, same will replace with bridge > > > > >> parameter once bridge supported. > > > > >> > > > > >> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > > > > > > > > > Looks good, there should be no functional change. > > > > > > > > Actually this breaks all existing users of this driver, see below. > > > > > > > > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > > > > > > >> --- > > > > >> Changes for v4, v3: > > > > >> - none > > > > >> > > > > >> drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 11 ++++++++--- > > > > >> 1 file changed, 8 insertions(+), 3 deletions(-) > > > > >> > > > > >> diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > > >> index 4f5efcace68e..2e9e7b2d4145 100644 > > > > >> --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > > >> +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > > >> @@ -21,6 +21,7 @@ > > > > >> > > > > >> #include <drm/drm_atomic_helper.h> > > > > >> #include <drm/drm_mipi_dsi.h> > > > > >> +#include <drm/drm_of.h> > > > > >> #include <drm/drm_panel.h> > > > > >> #include <drm/drm_print.h> > > > > >> #include <drm/drm_probe_helper.h> > > > > >> @@ -963,10 +964,14 @@ static int sun6i_dsi_attach(struct mipi_dsi_host *host, > > > > >> struct mipi_dsi_device *device) > > > > >> { > > > > >> struct sun6i_dsi *dsi = host_to_sun6i_dsi(host); > > > > >> - struct drm_panel *panel = of_drm_find_panel(device->dev.of_node); > > > > > > > > This is using the OF node of the DSI device, which is a direct child of > > > > the DSI host's OF node. There is no OF graph involved. > > > > > > > > >> + struct drm_panel *panel; > > > > >> + int ret; > > > > >> + > > > > >> + ret = drm_of_find_panel_or_bridge(dsi->dev->of_node, 0, 0, > > > > >> + &panel, NULL); > > > > > > > > However, this function expects to find the panel using OF graph. This > > > > does not work with existing device trees (PinePhone, PineTab) which do > > > > not use OF graph to connect the panel. And it cannot work, because the > > > > DSI host's binding specifies a single port: the input port from the > > > > display engine. > > > > > > Thanks for noticing this. I did understand your point and yes, I did > > > mention the updated pipeline in previous versions and forgot to add it > > > to this series. > > > > > > Here is the updated pipeline to make it work: > > > > > > https://patchwork.kernel.org/project/dri-devel/patch/20190524104252.20236-1-jagan@amarulasolutions.com/ > > > > > > Let me know your comments on this, so I will add a patch for the > > > above-affected DTS files. > > > > DT is an ABI, we need to ensure backward compatibility. Changes in > > kernel drivers can't break devices that have an old DT. > > Thanks for your point. > > So, we need to choose APIs that would compatible with the old DT and > new DT changes. Am I correct? Yes, that's correct.
On Wed, Mar 24, 2021 at 11:55:35AM +0200, Laurent Pinchart wrote: > Hi Jagan, > > On Wed, Mar 24, 2021 at 03:19:10PM +0530, Jagan Teki wrote: > > On Wed, Mar 24, 2021 at 3:09 PM Laurent Pinchart wrote: > > > On Wed, Mar 24, 2021 at 02:44:57PM +0530, Jagan Teki wrote: > > > > On Wed, Mar 24, 2021 at 8:18 AM Samuel Holland wrote: > > > > > On 3/23/21 5:53 PM, Laurent Pinchart wrote: > > > > > > On Mon, Mar 22, 2021 at 07:31:49PM +0530, Jagan Teki wrote: > > > > > >> Replace of_drm_find_panel with drm_of_find_panel_or_bridge > > > > > >> for finding panel, this indeed help to find the bridge if > > > > > >> bridge support added. > > > > > >> > > > > > >> Added NULL in bridge argument, same will replace with bridge > > > > > >> parameter once bridge supported. > > > > > >> > > > > > >> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > > > > > > > > > > > Looks good, there should be no functional change. > > > > > > > > > > Actually this breaks all existing users of this driver, see below. > > > > > > > > > > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > > > > > > > > >> --- > > > > > >> Changes for v4, v3: > > > > > >> - none > > > > > >> > > > > > >> drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 11 ++++++++--- > > > > > >> 1 file changed, 8 insertions(+), 3 deletions(-) > > > > > >> > > > > > >> diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > > > >> index 4f5efcace68e..2e9e7b2d4145 100644 > > > > > >> --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > > > >> +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > > > >> @@ -21,6 +21,7 @@ > > > > > >> > > > > > >> #include <drm/drm_atomic_helper.h> > > > > > >> #include <drm/drm_mipi_dsi.h> > > > > > >> +#include <drm/drm_of.h> > > > > > >> #include <drm/drm_panel.h> > > > > > >> #include <drm/drm_print.h> > > > > > >> #include <drm/drm_probe_helper.h> > > > > > >> @@ -963,10 +964,14 @@ static int sun6i_dsi_attach(struct mipi_dsi_host *host, > > > > > >> struct mipi_dsi_device *device) > > > > > >> { > > > > > >> struct sun6i_dsi *dsi = host_to_sun6i_dsi(host); > > > > > >> - struct drm_panel *panel = of_drm_find_panel(device->dev.of_node); > > > > > > > > > > This is using the OF node of the DSI device, which is a direct child of > > > > > the DSI host's OF node. There is no OF graph involved. > > > > > > > > > > >> + struct drm_panel *panel; > > > > > >> + int ret; > > > > > >> + > > > > > >> + ret = drm_of_find_panel_or_bridge(dsi->dev->of_node, 0, 0, > > > > > >> + &panel, NULL); > > > > > > > > > > However, this function expects to find the panel using OF graph. This > > > > > does not work with existing device trees (PinePhone, PineTab) which do > > > > > not use OF graph to connect the panel. And it cannot work, because the > > > > > DSI host's binding specifies a single port: the input port from the > > > > > display engine. > > > > > > > > Thanks for noticing this. I did understand your point and yes, I did > > > > mention the updated pipeline in previous versions and forgot to add it > > > > to this series. > > > > > > > > Here is the updated pipeline to make it work: > > > > > > > > https://patchwork.kernel.org/project/dri-devel/patch/20190524104252.20236-1-jagan@amarulasolutions.com/ > > > > > > > > Let me know your comments on this, so I will add a patch for the > > > > above-affected DTS files. > > > > > > DT is an ABI, we need to ensure backward compatibility. Changes in > > > kernel drivers can't break devices that have an old DT. > > > > Thanks for your point. > > > > So, we need to choose APIs that would compatible with the old DT and > > new DT changes. Am I correct? > > Yes, that's correct. However, I see no particular reason to change the DT binding in this case. The DSI devices are supposed to be described through a subnode of their DSI controller, that's the generic binding and except for very odd devices (and a bridge like this one is certainly not one), I see no reason to deviate from that. Maxime
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c index 4f5efcace68e..2e9e7b2d4145 100644 --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c @@ -21,6 +21,7 @@ #include <drm/drm_atomic_helper.h> #include <drm/drm_mipi_dsi.h> +#include <drm/drm_of.h> #include <drm/drm_panel.h> #include <drm/drm_print.h> #include <drm/drm_probe_helper.h> @@ -963,10 +964,14 @@ static int sun6i_dsi_attach(struct mipi_dsi_host *host, struct mipi_dsi_device *device) { struct sun6i_dsi *dsi = host_to_sun6i_dsi(host); - struct drm_panel *panel = of_drm_find_panel(device->dev.of_node); + struct drm_panel *panel; + int ret; + + ret = drm_of_find_panel_or_bridge(dsi->dev->of_node, 0, 0, + &panel, NULL); + if (ret) + return ret; - if (IS_ERR(panel)) - return PTR_ERR(panel); if (!dsi->drm || !dsi->drm->registered) return -EPROBE_DEFER;
Replace of_drm_find_panel with drm_of_find_panel_or_bridge for finding panel, this indeed help to find the bridge if bridge support added. Added NULL in bridge argument, same will replace with bridge parameter once bridge supported. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v4, v3: - none drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)