| Message ID | 20210329112819.64043-2-s.riedmueller@phytec.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/3] ARM: dts: imx6: pfla02: Fix USB vbus enable pinmuxing | expand |
On Mon, Mar 29, 2021 at 8:28 AM Stefan Riedmueller <s.riedmueller@phytec.de> wrote: > > Due to a hardware bug preventing the correct detection if the ID pin > the USB OTG port cannot be used in otg mode. It can either be set to > host or peripheral. Set it to peripheral so vbus is disabled by default. > > Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi index d434868e870a..b2f78b4362cb 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -164,6 +164,7 @@ &usbh1 { &usbotg { status = "okay"; + dr_mode = "peripheral"; }; &usdhc2 {
Due to a hardware bug preventing the correct detection if the ID pin the USB OTG port cannot be used in otg mode. It can either be set to host or peripheral. Set it to peripheral so vbus is disabled by default. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> --- arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 1 + 1 file changed, 1 insertion(+)