| Message ID | 20210329161256.31171-4-christianshewitt@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: meson: misc ODROID-N2/N2+ changes | expand |
On 29/03/2021 18:12, Christian Hewitt wrote: > From: Hyeonki Hong <hhk7734@gmail.com> > > Add GPIO line-name identifiers to the ODROID N2/N2+ common dtsi. > > Signed-off-by: Hyeonki Hong <hhk7734@gmail.com> > --- > .../dts/amlogic/meson-g12b-odroid-n2.dtsi | 45 +++++++++++++++++++ > 1 file changed, 45 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi > index 139c12cf9f66..4489715fc4f3 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi > @@ -446,6 +446,51 @@ > }; > > &gpio { > + gpio-line-names = > + /* GPIOZ */ > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", "", > + /* GPIOH */ > + "", "", "", "", "", "", "", "", > + "", > + /* BOOT */ > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", "", > + /* GPIOC */ > + "", "", "", "", "", "", "", "", > + /* GPIOA */ > + "PIN_44", /* GPIOA_0 */ > + "PIN_46", /* GPIOA_1 */ > + "PIN_45", /* GPIOA_2 */ > + "PIN_47", /* GPIOA_3 */ > + "PIN_26", /* GPIOA_4 */ > + "", "", "", "", "", "", > + "PIN_42", /* GPIOA_11 */ > + "PIN_32", /* GPIOA_12 */ > + "PIN_7", /* GPIOA_13 */ > + "PIN_27", /* GPIOA_14 */ > + "PIN_28", /* GPIOA_15 */ > + /* GPIOX */ > + "PIN_16", /* GPIOX_0 */ > + "PIN_18", /* GPIOX_1 */ > + "PIN_22", /* GPIOX_2 */ > + "PIN_11", /* GPIOX_3 */ > + "PIN_13", /* GPIOX_4 */ > + "PIN_33", /* GPIOX_5 */ > + "PIN_35", /* GPIOX_6 */ > + "PIN_15", /* GPIOX_7 */ > + "PIN_19", /* GPIOX_8 */ > + "PIN_21", /* GPIOX_9 */ > + "PIN_24", /* GPIOX_10 */ > + "PIN_23", /* GPIOX_11 */ > + "PIN_8", /* GPIOX_12 */ > + "PIN_10", /* GPIOX_13 */ > + "PIN_29", /* GPIOX_14 */ > + "PIN_31", /* GPIOX_15 */ > + "PIN_12", /* GPIOX_16 */ > + "PIN_3", /* GPIOX_17 */ > + "PIN_5", /* GPIOX_18 */ > + "PIN_36"; /* GPIOX_19 */ > /* > * WARNING: The USB Hub on the Odroid-N2 needs a reset signal > * to be turned high in order to be detected by the USB Controller > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Hi Christian, Christian Hewitt <christianshewitt@gmail.com> writes: > From: Hyeonki Hong <hhk7734@gmail.com> > > Add GPIO line-name identifiers to the ODROID N2/N2+ common dtsi. > > Signed-off-by: Hyeonki Hong <hhk7734@gmail.com> You need to add your SoB here also. Kevin
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi index 139c12cf9f66..4489715fc4f3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi @@ -446,6 +446,51 @@ }; &gpio { + gpio-line-names = + /* GPIOZ */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* GPIOH */ + "", "", "", "", "", "", "", "", + "", + /* BOOT */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* GPIOC */ + "", "", "", "", "", "", "", "", + /* GPIOA */ + "PIN_44", /* GPIOA_0 */ + "PIN_46", /* GPIOA_1 */ + "PIN_45", /* GPIOA_2 */ + "PIN_47", /* GPIOA_3 */ + "PIN_26", /* GPIOA_4 */ + "", "", "", "", "", "", + "PIN_42", /* GPIOA_11 */ + "PIN_32", /* GPIOA_12 */ + "PIN_7", /* GPIOA_13 */ + "PIN_27", /* GPIOA_14 */ + "PIN_28", /* GPIOA_15 */ + /* GPIOX */ + "PIN_16", /* GPIOX_0 */ + "PIN_18", /* GPIOX_1 */ + "PIN_22", /* GPIOX_2 */ + "PIN_11", /* GPIOX_3 */ + "PIN_13", /* GPIOX_4 */ + "PIN_33", /* GPIOX_5 */ + "PIN_35", /* GPIOX_6 */ + "PIN_15", /* GPIOX_7 */ + "PIN_19", /* GPIOX_8 */ + "PIN_21", /* GPIOX_9 */ + "PIN_24", /* GPIOX_10 */ + "PIN_23", /* GPIOX_11 */ + "PIN_8", /* GPIOX_12 */ + "PIN_10", /* GPIOX_13 */ + "PIN_29", /* GPIOX_14 */ + "PIN_31", /* GPIOX_15 */ + "PIN_12", /* GPIOX_16 */ + "PIN_3", /* GPIOX_17 */ + "PIN_5", /* GPIOX_18 */ + "PIN_36"; /* GPIOX_19 */ /* * WARNING: The USB Hub on the Odroid-N2 needs a reset signal * to be turned high in order to be detected by the USB Controller