@@ -1006,6 +1006,8 @@ This describes how the VFS can manipulate an open file. As of kernel
loff_t (*remap_file_range)(struct file *file_in, loff_t pos_in,
struct file *file_out, loff_t pos_out,
loff_t len, unsigned int remap_flags);
+ int (*xchg_file_range)(struct file *file1, struct file *file2,
+ struct file_xchg_range *fxr);
int (*fadvise)(struct file *, loff_t, loff_t, int);
};
@@ -1124,6 +1126,20 @@ otherwise noted.
ok with the implementation shortening the request length to
satisfy alignment or EOF requirements (or any other reason).
+``xchg_file_range``
+ called by the ioctl(2) system call for FIEXCHANGE_RANGE to exchange the
+ contents of two file ranges. An implementation should exchange
+ fxr.length bytes starting at fxr.file1_offset in file1 with the same
+ number of bytes starting at fxr.file2_offset in file2. Refer to
+ fiexchange.h file for more information. Implementations must call
+ generic_xchg_file_range_prep to prepare the two files prior to taking
+ locks; they must call generic_xchg_file_range_check_fresh once the
+ inode is locked to abort the call if file2 has changed; and they must
+ update the inode change and mod times of both files as part of the
+ metadata update. The timestamp updates must be done atomically as part
+ of the data exchange operation to ensure correctness of the freshness
+ check.
+
``fadvise``
possibly called by the fadvise64() system call.
@@ -260,6 +260,45 @@ static long ioctl_file_clone_range(struct file *file,
args.src_length, args.dest_offset);
}
+static long ioctl_file_xchg_range(struct file *file2,
+ struct file_xchg_range __user *argp)
+{
+ struct file_xchg_range args;
+ struct fd file1;
+ __u64 old_flags;
+ int ret;
+
+ if (copy_from_user(&args, argp, sizeof(args)))
+ return -EFAULT;
+
+ file1 = fdget(args.file1_fd);
+ if (!file1.file)
+ return -EBADF;
+
+ ret = -EXDEV;
+ if (file1.file->f_path.mnt != file2->f_path.mnt)
+ goto fdput;
+
+ old_flags = args.flags;
+
+ ret = vfs_xchg_file_range(file1.file, file2, &args);
+ if (ret)
+ goto fdput;
+
+ /*
+ * The VFS will set RANGE_FSYNC on its own if the file or inode require
+ * synchronous writes. Don't leak this back to userspace.
+ */
+ args.flags &= ~FILE_XCHG_RANGE_FSYNC;
+ args.flags |= (old_flags & FILE_XCHG_RANGE_FSYNC);
+
+ if (copy_to_user(argp, &args, sizeof(args)))
+ ret = -EFAULT;
+fdput:
+ fdput(file1);
+ return ret;
+}
+
#ifdef CONFIG_BLOCK
static inline sector_t logical_to_blk(struct inode *inode, loff_t offset)
@@ -720,6 +759,9 @@ static int do_vfs_ioctl(struct file *filp, unsigned int fd,
case FIDEDUPERANGE:
return ioctl_file_dedupe_range(filp, argp);
+ case FIEXCHANGE_RANGE:
+ return ioctl_file_xchg_range(filp, argp);
+
case FIONREAD:
if (!S_ISREG(inode->i_mode))
return vfs_ioctl(filp, cmd, arg);
@@ -580,3 +580,286 @@ int vfs_dedupe_file_range(struct file *file, struct file_dedupe_range *same)
return ret;
}
EXPORT_SYMBOL(vfs_dedupe_file_range);
+
+/* Performs necessary checks before doing a range exchange. */
+static int generic_xchg_file_range_checks(struct file *file1,
+ struct file *file2,
+ const struct file_xchg_range *fxr,
+ unsigned int blocksize)
+{
+ struct inode *inode1 = file1->f_mapping->host;
+ struct inode *inode2 = file2->f_mapping->host;
+ int64_t test_len;
+ uint64_t blen;
+ loff_t size1, size2;
+ int ret;
+
+ if (fxr->length < 0)
+ return -EINVAL;
+
+ /* The start of both ranges must be aligned to an fs block. */
+ if (!IS_ALIGNED(fxr->file1_offset, blocksize) ||
+ !IS_ALIGNED(fxr->file2_offset, blocksize))
+ return -EINVAL;
+
+ /* Ensure offsets don't wrap. */
+ if (fxr->file1_offset + fxr->length < fxr->file1_offset ||
+ fxr->file2_offset + fxr->length < fxr->file2_offset)
+ return -EINVAL;
+
+ size1 = i_size_read(inode1);
+ size2 = i_size_read(inode2);
+
+ /*
+ * We require both ranges to be within EOF, unless we're exchanging
+ * to EOF. generic_xchg_range_prep already checked that both
+ * fxr->file1_offset and fxr->file2_offset are within EOF.
+ */
+ if (!(fxr->flags & FILE_XCHG_RANGE_TO_EOF) &&
+ (fxr->file1_offset + fxr->length > size1 ||
+ fxr->file2_offset + fxr->length > size2))
+ return -EINVAL;
+
+ /*
+ * Make sure we don't hit any file size limits. If we hit any size
+ * limits such that test_length was adjusted, we abort the whole
+ * operation.
+ */
+ test_len = fxr->length;
+ ret = generic_write_check_limits(file2, fxr->file2_offset, &test_len);
+ if (ret)
+ return ret;
+ ret = generic_write_check_limits(file1, fxr->file1_offset, &test_len);
+ if (ret)
+ return ret;
+ if (test_len != fxr->length)
+ return -EINVAL;
+
+ /*
+ * If the user wanted us to exchange up to the infile's EOF, round up
+ * to the next block boundary for this check. Do the same for the
+ * outfile.
+ *
+ * Otherwise, reject the range length if it's not block aligned. We
+ * already confirmed the starting offsets' block alignment.
+ */
+ if (fxr->file1_offset + fxr->length == size1)
+ blen = ALIGN(size1, blocksize) - fxr->file1_offset;
+ else if (fxr->file2_offset + fxr->length == size2)
+ blen = ALIGN(size2, blocksize) - fxr->file2_offset;
+ else if (!IS_ALIGNED(fxr->length, blocksize))
+ return -EINVAL;
+ else
+ blen = fxr->length;
+
+ /* Don't allow overlapped exchanges within the same file. */
+ if (inode1 == inode2 &&
+ fxr->file2_offset + blen > fxr->file1_offset &&
+ fxr->file1_offset + blen > fxr->file2_offset)
+ return -EINVAL;
+
+ return 0;
+}
+
+/*
+ * Check that the two inodes are eligible for range exchanges, the ranges make
+ * sense, and then flush all dirty data. Caller must ensure that the inodes
+ * have been locked against any other modifications.
+ */
+int generic_xchg_file_range_prep(struct file *file1, struct file *file2,
+ struct file_xchg_range *fxr,
+ unsigned int blocksize)
+{
+ struct inode *inode1 = file_inode(file1);
+ struct inode *inode2 = file_inode(file2);
+ u64 blkmask = blocksize - 1;
+ bool same_inode = (inode1 == inode2);
+ int ret;
+
+ /* Don't touch certain kinds of inodes */
+ if (IS_IMMUTABLE(inode1) || IS_IMMUTABLE(inode2))
+ return -EPERM;
+ if (IS_SWAPFILE(inode1) || IS_SWAPFILE(inode2))
+ return -ETXTBSY;
+
+ /* Don't reflink dirs, pipes, sockets... */
+ if (S_ISDIR(inode1->i_mode) || S_ISDIR(inode2->i_mode))
+ return -EISDIR;
+ if (!S_ISREG(inode1->i_mode) || !S_ISREG(inode2->i_mode))
+ return -EINVAL;
+
+ /* Ranges cannot start after EOF. */
+ if (fxr->file1_offset > i_size_read(inode1) ||
+ fxr->file2_offset > i_size_read(inode2))
+ return -EINVAL;
+
+ /*
+ * If the caller said to exchange to EOF, we set the length of the
+ * request large enough to cover everything to the end of both files.
+ */
+ if (fxr->flags & FILE_XCHG_RANGE_TO_EOF)
+ fxr->length = max_t(int64_t,
+ i_size_read(inode1) - fxr->file1_offset,
+ i_size_read(inode2) - fxr->file2_offset);
+
+ /* Zero length exchange exits immediately. */
+ if (fxr->length == 0)
+ return 0;
+
+ /* Check that we don't violate system file offset limits. */
+ ret = generic_xchg_file_range_checks(file1, file2, fxr, blocksize);
+ if (ret)
+ return ret;
+
+ /*
+ * Ensure that we don't exchange a partial EOF block into the middle of
+ * another file.
+ */
+ if (fxr->length & blkmask) {
+ loff_t new_length = fxr->length;
+
+ if (fxr->file2_offset + new_length < i_size_read(inode2))
+ new_length &= ~blkmask;
+
+ if (fxr->file1_offset + new_length < i_size_read(inode1))
+ new_length &= ~blkmask;
+
+ if (new_length != fxr->length)
+ return -EINVAL;
+ }
+
+ /* Wait for the completion of any pending IOs on both files */
+ inode_dio_wait(inode1);
+ if (!same_inode)
+ inode_dio_wait(inode2);
+
+ ret = filemap_write_and_wait_range(inode1->i_mapping, fxr->file1_offset,
+ fxr->file1_offset + fxr->length - 1);
+ if (ret)
+ return ret;
+
+ ret = filemap_write_and_wait_range(inode2->i_mapping, fxr->file2_offset,
+ fxr->file2_offset + fxr->length - 1);
+ if (ret)
+ return ret;
+
+ /*
+ * If the files or inodes involved require synchronous writes, amend
+ * the request to force the filesystem to flush all data and metadata
+ * to disk after the operation completes.
+ */
+ if (((file1->f_flags | file2->f_flags) & (__O_SYNC | O_DSYNC)) ||
+ IS_SYNC(file_inode(file1)) || IS_SYNC(file_inode(file2)))
+ fxr->flags |= FILE_XCHG_RANGE_FSYNC;
+
+ /* Remove privilege bits from both files. */
+ ret = file_remove_privs(file1);
+ if (ret)
+ return ret;
+ return file_remove_privs(file2);
+}
+EXPORT_SYMBOL(generic_xchg_file_range_prep);
+
+/*
+ * Check that both files' metadata agree with the snapshot that we took for
+ * the range exchange request.
+
+ * This should be called after the filesystem has locked /all/ inode metadata
+ * against modification.
+ */
+int generic_xchg_file_range_check_fresh(struct inode *inode1,
+ struct inode *inode2,
+ const struct file_xchg_range *fxr)
+{
+ /* Check that the offset/length values cover all of both files */
+ if ((fxr->flags & FILE_XCHG_RANGE_FULL_FILES) &&
+ (fxr->file1_offset != 0 ||
+ fxr->file2_offset != 0 ||
+ fxr->length != i_size_read(inode1) ||
+ fxr->length != i_size_read(inode2)))
+ return -EDOM;
+
+ /* Check that file2 hasn't otherwise been modified. */
+ if ((fxr->flags & FILE_XCHG_RANGE_FILE2_FRESH) &&
+ (fxr->file2_ino != inode2->i_ino ||
+ fxr->file2_ctime != inode2->i_ctime.tv_sec ||
+ fxr->file2_ctime_nsec != inode2->i_ctime.tv_nsec ||
+ fxr->file2_mtime != inode2->i_mtime.tv_sec ||
+ fxr->file2_mtime_nsec != inode2->i_mtime.tv_nsec))
+ return -EBUSY;
+
+ return 0;
+}
+EXPORT_SYMBOL(generic_xchg_file_range_check_fresh);
+
+static inline int xchg_range_verify_area(struct file *file, loff_t pos,
+ struct file_xchg_range *fxr)
+{
+ int64_t len = fxr->length;
+
+ if (fxr->flags & FILE_XCHG_RANGE_TO_EOF)
+ len = min_t(int64_t, len, i_size_read(file_inode(file)) - pos);
+ return remap_verify_area(file, pos, len, true);
+}
+
+int do_xchg_file_range(struct file *file1, struct file *file2,
+ struct file_xchg_range *fxr)
+{
+ int ret;
+
+ if ((fxr->flags & ~FILE_XCHG_RANGE_ALL_FLAGS) ||
+ memchr_inv(&fxr->pad, 0, sizeof(fxr->pad)))
+ return -EINVAL;
+
+ if ((fxr->flags & FILE_XCHG_RANGE_FULL_FILES) &&
+ (fxr->flags & FILE_XCHG_RANGE_TO_EOF))
+ return -EINVAL;
+
+ /*
+ * The ioctl enforces that src and dest files are on the same mount.
+ * Practically, they only need to be on the same file system.
+ */
+ if (file_inode(file1)->i_sb != file_inode(file2)->i_sb)
+ return -EXDEV;
+
+ ret = generic_file_rw_checks(file1, file2);
+ if (ret < 0)
+ return ret;
+
+ ret = generic_file_rw_checks(file2, file1);
+ if (ret < 0)
+ return ret;
+
+ if (!file1->f_op->xchg_file_range)
+ return -EOPNOTSUPP;
+
+ ret = xchg_range_verify_area(file1, fxr->file1_offset, fxr);
+ if (ret)
+ return ret;
+
+ ret = xchg_range_verify_area(file2, fxr->file2_offset, fxr);
+ if (ret)
+ return ret;
+
+ ret = file2->f_op->xchg_file_range(file1, file2, fxr);
+ if (ret)
+ return ret;
+
+ fsnotify_modify(file1);
+ fsnotify_modify(file2);
+ return 0;
+}
+EXPORT_SYMBOL(do_xchg_file_range);
+
+int vfs_xchg_file_range(struct file *file1, struct file *file2,
+ struct file_xchg_range *fxr)
+{
+ int ret;
+
+ file_start_write(file2);
+ ret = do_xchg_file_range(file1, file2, fxr);
+ file_end_write(file2);
+
+ return ret;
+}
+EXPORT_SYMBOL(vfs_xchg_file_range);
@@ -848,6 +848,7 @@ struct xfs_scrub_metadata {
#define XFS_IOC_FSGEOMETRY _IOR ('X', 126, struct xfs_fsop_geom)
#define XFS_IOC_BULKSTAT _IOR ('X', 127, struct xfs_bulkstat_req)
#define XFS_IOC_INUMBERS _IOR ('X', 128, struct xfs_inumbers_req)
+/* FIEXCHANGE_RANGE ----------- hoisted 129 */
/* XFS_IOC_GETFSUUID ---------- deprecated 140 */
@@ -44,6 +44,7 @@
#include <asm/byteorder.h>
#include <uapi/linux/fs.h>
+#include <uapi/linux/fiexchange.h>
struct backing_dev_info;
struct bdi_writeback;
@@ -1924,6 +1925,8 @@ struct file_operations {
loff_t (*remap_file_range)(struct file *file_in, loff_t pos_in,
struct file *file_out, loff_t pos_out,
loff_t len, unsigned int remap_flags);
+ int (*xchg_file_range)(struct file *file1, struct file *file2,
+ struct file_xchg_range *fsr);
int (*fadvise)(struct file *, loff_t, loff_t, int);
} __randomize_layout;
@@ -1993,6 +1996,9 @@ extern int generic_remap_file_range_prep(struct file *file_in, loff_t pos_in,
struct file *file_out, loff_t pos_out,
loff_t *count,
unsigned int remap_flags);
+extern int generic_xchg_file_range_prep(struct file *file1, struct file *file2,
+ struct file_xchg_range *fsr,
+ unsigned int blocksize);
extern loff_t do_clone_file_range(struct file *file_in, loff_t pos_in,
struct file *file_out, loff_t pos_out,
loff_t len, unsigned int remap_flags);
@@ -2004,7 +2010,13 @@ extern int vfs_dedupe_file_range(struct file *file,
extern loff_t vfs_dedupe_file_range_one(struct file *src_file, loff_t src_pos,
struct file *dst_file, loff_t dst_pos,
loff_t len, unsigned int remap_flags);
-
+extern int do_xchg_file_range(struct file *file1, struct file *file2,
+ struct file_xchg_range *fsr);
+extern int vfs_xchg_file_range(struct file *file1, struct file *file2,
+ struct file_xchg_range *fsr);
+extern int generic_xchg_file_range_check_fresh(struct inode *inode1,
+ struct inode *inode2,
+ const struct file_xchg_range *fsr);
struct super_operations {
struct inode *(*alloc_inode)(struct super_block *sb);
new file mode 100644
@@ -0,0 +1,101 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later WITH Linux-syscall-note */
+/*
+ * FIEXCHANGE ioctl definitions, to facilitate exchanging parts of files.
+ *
+ * Copyright (C) 2021 Oracle. All Rights Reserved.
+ *
+ * Author: Darrick J. Wong <djwong@kernel.org>
+ */
+#ifndef _LINUX_FIEXCHANGE_H
+#define _LINUX_FIEXCHANGE_H
+
+#include <linux/types.h>
+
+/*
+ * Exchange part of file1 with part of the file that this ioctl that is being
+ * called against (which we'll call file2). Filesystems must be able to
+ * restart and complete the operation even after the system goes down.
+ */
+struct file_xchg_range {
+ __s64 file1_fd;
+ __s64 file1_offset; /* file1 offset, bytes */
+ __s64 file2_offset; /* file2 offset, bytes */
+ __s64 length; /* bytes to exchange */
+
+ __u64 flags; /* see FILE_XCHG_RANGE_* below */
+
+ /* file2 metadata for optional freshness checks */
+ __s64 file2_ino; /* inode number */
+ __s64 file2_mtime; /* modification time */
+ __s64 file2_ctime; /* change time */
+ __s32 file2_mtime_nsec; /* mod time, nsec */
+ __s32 file2_ctime_nsec; /* change time, nsec */
+
+ __u64 pad[6]; /* must be zeroes */
+};
+
+/*
+ * Atomic exchange operations are not required. This relaxes the requirement
+ * that the filesystem must be able to complete the operation after a crash.
+ */
+#define FILE_XCHG_RANGE_NONATOMIC (1 << 0)
+
+/*
+ * Check that file2's inode number, mtime, and ctime against the values
+ * provided, and return -EBUSY if there isn't an exact match.
+ */
+#define FILE_XCHG_RANGE_FILE2_FRESH (1 << 1)
+
+/*
+ * Check that the file1's length is equal to file1_offset + length, and that
+ * file2's length is equal to file2_offset + length. Returns -EDOM if there
+ * isn't an exact match.
+ */
+#define FILE_XCHG_RANGE_FULL_FILES (1 << 2)
+
+/*
+ * Exchange file data all the way to the ends of both files, and then exchange
+ * the file sizes. This flag can be used to replace a file's contents with a
+ * different amount of data. length will be ignored.
+ */
+#define FILE_XCHG_RANGE_TO_EOF (1 << 3)
+
+/* Flush all changes in file data and file metadata to disk before returning. */
+#define FILE_XCHG_RANGE_FSYNC (1 << 4)
+
+/* Dry run; do all the parameter verification but do not change anything. */
+#define FILE_XCHG_RANGE_DRY_RUN (1 << 5)
+
+/*
+ * Do not exchange any part of the range where file1's mapping is a hole. This
+ * can be used to emulate scatter-gather atomic writes with a temp file.
+ */
+#define FILE_XCHG_RANGE_SKIP_FILE1_HOLES (1 << 6)
+
+/*
+ * Commit the contents of file1 into file2 if file2 has the same inode number,
+ * mtime, and ctime as the arguments provided to the call. The old contents of
+ * file2 will be moved to file1.
+ *
+ * With this flag, all committed information can be retrieved even if the
+ * system crashes or is rebooted. This includes writing through or flushing a
+ * disk cache if present. The call blocks until the device reports that the
+ * commit is complete.
+ *
+ * This flag should not be combined with NONATOMIC. It can be combined with
+ * SKIP_FILE1_HOLES.
+ */
+#define FILE_XCHG_RANGE_COMMIT (FILE_XCHG_RANGE_FILE2_FRESH | \
+ FILE_XCHG_RANGE_FSYNC)
+
+#define FILE_XCHG_RANGE_ALL_FLAGS (FILE_XCHG_RANGE_NONATOMIC | \
+ FILE_XCHG_RANGE_FILE2_FRESH | \
+ FILE_XCHG_RANGE_FULL_FILES | \
+ FILE_XCHG_RANGE_TO_EOF | \
+ FILE_XCHG_RANGE_FSYNC | \
+ FILE_XCHG_RANGE_DRY_RUN | \
+ FILE_XCHG_RANGE_SKIP_FILE1_HOLES)
+
+#define FIEXCHANGE_RANGE _IOWR('X', 129, struct file_xchg_range)
+
+#endif /* _LINUX_FIEXCHANGE_H */