diff mbox series

[1/3] dt-bindings: mmc: iproc-sdhci: Convert to json-schema

Message ID 20210406104802.20898-2-nsaenz@kernel.org (mailing list archive)
State New, archived
Headers show
Series BCM2711 sdhci-iproc improvements | expand

Commit Message

Nicolas Saenz Julienne April 6, 2021, 10:48 a.m. UTC 
Convert the brcm,iproc-sdhci binding to DT schema format using json-schema

Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

---

 .../bindings/mmc/brcm,iproc-sdhci.yaml        | 63 +++++++++++++++++++
 .../bindings/mmc/brcm,sdhci-iproc.txt         | 37 -----------
 2 files changed, 63 insertions(+), 37 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml
 delete mode 100644 Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt

Comments

Rob Herring (Arm) April 9, 2021, 4:18 p.m. UTC | #1 
On Tue, 06 Apr 2021 12:48:01 +0200, Nicolas Saenz Julienne wrote:
> Convert the brcm,iproc-sdhci binding to DT schema format using json-schema
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
> 
> ---
> 
>  .../bindings/mmc/brcm,iproc-sdhci.yaml        | 63 +++++++++++++++++++
>  .../bindings/mmc/brcm,sdhci-iproc.txt         | 37 -----------
>  2 files changed, 63 insertions(+), 37 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml
>  delete mode 100644 Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Ulf Hansson April 12, 2021, 7:52 a.m. UTC | #2 
On Tue, 6 Apr 2021 at 12:48, Nicolas Saenz Julienne <nsaenz@kernel.org> wrote:
>
> Convert the brcm,iproc-sdhci binding to DT schema format using json-schema
>
> Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Applied for next, thanks! (I guess patch2 and patch3 needs a re-spin?)

Kind regards
Uffe


>
> ---
>
>  .../bindings/mmc/brcm,iproc-sdhci.yaml        | 63 +++++++++++++++++++
>  .../bindings/mmc/brcm,sdhci-iproc.txt         | 37 -----------
>  2 files changed, 63 insertions(+), 37 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml
>  delete mode 100644 Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
>
> diff --git a/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml
> new file mode 100644
> index 000000000000..6f569fbfa134
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml
> @@ -0,0 +1,63 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mmc/brcm,iproc-sdhci.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom IPROC SDHCI controller
> +
> +maintainers:
> +  - Ray Jui <ray.jui@broadcom.com>
> +  - Scott Branden <scott.branden@broadcom.com>
> +  - Nicolas Saenz Julienne <nsaenz@kernel.org>
> +
> +allOf:
> +  - $ref: mmc-controller.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - brcm,bcm2835-sdhci
> +      - brcm,bcm2711-emmc2
> +      - brcm,sdhci-iproc-cygnus
> +      - brcm,sdhci-iproc
> +
> +  reg:
> +    minItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +    description:
> +      Handle to core clock for the sdhci controller.
> +
> +  sdhci,auto-cmd12:
> +    type: boolean
> +    description: Specifies that controller should use auto CMD12
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/bcm-cygnus.h>
> +
> +    mmc@18041000 {
> +      compatible = "brcm,sdhci-iproc-cygnus";
> +      reg = <0x18041000 0x100>;
> +      interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> +      clocks = <&lcpll0_clks BCM_CYGNUS_LCPLL0_SDIO_CLK>;
> +      bus-width = <4>;
> +      sdhci,auto-cmd12;
> +      no-1-8-v;
> +    };
> +...
> diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
> deleted file mode 100644
> index 09d87cc1182a..000000000000
> --- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
> +++ /dev/null
> @@ -1,37 +0,0 @@
> -Broadcom IPROC SDHCI controller
> -
> -This file documents differences between the core properties described
> -by mmc.txt and the properties that represent the IPROC SDHCI controller.
> -
> -Required properties:
> -- compatible : Should be one of the following
> -              "brcm,bcm2835-sdhci"
> -              "brcm,bcm2711-emmc2"
> -              "brcm,sdhci-iproc-cygnus"
> -              "brcm,sdhci-iproc"
> -
> -Use brcm2835-sdhci for the eMMC controller on the BCM2835 (Raspberry Pi) and
> -bcm2711-emmc2 for the additional eMMC2 controller on BCM2711.
> -
> -Use sdhci-iproc-cygnus for Broadcom SDHCI Controllers
> -restricted to 32bit host accesses to SDHCI registers.
> -
> -Use sdhci-iproc for Broadcom SDHCI Controllers that allow standard
> -8, 16, 32-bit host access to SDHCI register.
> -
> -- clocks : The clock feeding the SDHCI controller.
> -
> -Optional properties:
> -  - sdhci,auto-cmd12: specifies that controller should use auto CMD12.
> -
> -Example:
> -
> -sdhci0: sdhci@18041000 {
> -       compatible = "brcm,sdhci-iproc-cygnus";
> -       reg = <0x18041000 0x100>;
> -       interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> -       clocks = <&lcpll0_clks BCM_CYGNUS_LCPLL0_SDIO_CLK>;
> -       bus-width = <4>;
> -       sdhci,auto-cmd12;
> -       no-1-8-v;
> -};
> --
> 2.30.2
>
Nicolas Saenz Julienne April 12, 2021, 8:13 a.m. UTC | #3 
On Mon, 2021-04-12 at 09:52 +0200, Ulf Hansson wrote:
> On Tue, 6 Apr 2021 at 12:48, Nicolas Saenz Julienne <nsaenz@kernel.org> wrote:
> > 
> > Convert the brcm,iproc-sdhci binding to DT schema format using json-schema
> > 
> > Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
> 
> Applied for next, thanks! (I guess patch2 and patch3 needs a re-spin?)

Yes, that's right. Thanks!

Regards,
Nicolas
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml
new file mode 100644
index 000000000000..6f569fbfa134
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml
@@ -0,0 +1,63 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/brcm,iproc-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom IPROC SDHCI controller
+
+maintainers:
+  - Ray Jui <ray.jui@broadcom.com>
+  - Scott Branden <scott.branden@broadcom.com>
+  - Nicolas Saenz Julienne <nsaenz@kernel.org>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2835-sdhci
+      - brcm,bcm2711-emmc2
+      - brcm,sdhci-iproc-cygnus
+      - brcm,sdhci-iproc
+
+  reg:
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Handle to core clock for the sdhci controller.
+
+  sdhci,auto-cmd12:
+    type: boolean
+    description: Specifies that controller should use auto CMD12
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/bcm-cygnus.h>
+
+    mmc@18041000 {
+      compatible = "brcm,sdhci-iproc-cygnus";
+      reg = <0x18041000 0x100>;
+      interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&lcpll0_clks BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+      bus-width = <4>;
+      sdhci,auto-cmd12;
+      no-1-8-v;
+    };
+...
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
deleted file mode 100644
index 09d87cc1182a..000000000000
--- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
+++ /dev/null
@@ -1,37 +0,0 @@ 
-Broadcom IPROC SDHCI controller
-
-This file documents differences between the core properties described
-by mmc.txt and the properties that represent the IPROC SDHCI controller.
-
-Required properties:
-- compatible : Should be one of the following
-	       "brcm,bcm2835-sdhci"
-	       "brcm,bcm2711-emmc2"
-	       "brcm,sdhci-iproc-cygnus"
-	       "brcm,sdhci-iproc"
-
-Use brcm2835-sdhci for the eMMC controller on the BCM2835 (Raspberry Pi) and
-bcm2711-emmc2 for the additional eMMC2 controller on BCM2711.
-
-Use sdhci-iproc-cygnus for Broadcom SDHCI Controllers
-restricted to 32bit host accesses to SDHCI registers.
-
-Use sdhci-iproc for Broadcom SDHCI Controllers that allow standard
-8, 16, 32-bit host access to SDHCI register.
-
-- clocks : The clock feeding the SDHCI controller.
-
-Optional properties:
-  - sdhci,auto-cmd12: specifies that controller should use auto CMD12.
-
-Example:
-
-sdhci0: sdhci@18041000 {
-	compatible = "brcm,sdhci-iproc-cygnus";
-	reg = <0x18041000 0x100>;
-	interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&lcpll0_clks BCM_CYGNUS_LCPLL0_SDIO_CLK>;
-	bus-width = <4>;
-	sdhci,auto-cmd12;
-	no-1-8-v;
-};