diff mbox series

Revert "ASoC: mt6359: add ASoC mt6359 ASoC accdet jack document"

Message ID 20210416180118.3662904-1-robh@kernel.org (mailing list archive)
State New, archived
Headers show
Series Revert "ASoC: mt6359: add ASoC mt6359 ASoC accdet jack document" | expand

Commit Message

Rob Herring (Arm) April 16, 2021, 6:01 p.m. UTC 
This reverts commit e61c589587c772c5f672b22683c3e0b38be20702.

The binding document has lots of schema errors and there's been no
effort to fix them, so let's remove it.

Cc: Argus Lin <argus.lin@mediatek.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
 .../bindings/sound/mt6359-accdet.yaml         | 164 ------------------
 1 file changed, 164 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/mt6359-accdet.yaml

Comments

Mark Brown April 16, 2021, 6:34 p.m. UTC | #1 
On Fri, 16 Apr 2021 13:01:18 -0500, Rob Herring wrote:
> This reverts commit e61c589587c772c5f672b22683c3e0b38be20702.
> 
> The binding document has lots of schema errors and there's been no
> effort to fix them, so let's remove it.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] Revert "ASoC: mt6359: add ASoC mt6359 ASoC accdet jack document"
      commit: d63f2a88d5cfaad025f26e1107f3807d579654c5

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/mt6359-accdet.yaml b/Documentation/devicetree/bindings/sound/mt6359-accdet.yaml
deleted file mode 100644
index 7fb3e8dfb4c5..000000000000
--- a/Documentation/devicetree/bindings/sound/mt6359-accdet.yaml
+++ /dev/null
@@ -1,164 +0,0 @@ 
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/sound/mt6359-accdet.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Mediatek Technologies Inc. MT6359 ASoC accdet jack driver bindings
-
-maintainers:
-  - Chipeng Chang <chipeng.chang@mediatek.com>
-
-description: |
-  This binding describes the Mediatek Technologies MT6359 ASoC
-  accdet jack driver.
-
-properties:
-  mediatek,accdet-name:
-    maxItems: 1
-    description: named as "mt6359-accdet" jack.
-
-  mediatek,mic-vol:
-    maxItems: 1
-    description: |
-      accdet micbias1 voltage.
-
-      enum:
-        - 0x00 # 1.7v - micbias1 volage is 1.7v.
-        - 0x01 # 1.8v - micbias1 volage is 1.8v.
-        - 0x02 # 1.9v - micbias1 volage is 1.9v.
-        - 0x03 # 2.0v - micbias1 volage is 2.0v.
-        - 0x04 # 2.1v - micbias1 volage is 2.1v.
-        - 0x05 # 2.5v - micbias1 volage is 2.5v.
-        - 0x06 # 2.6v - micbias1 volage is 2.6v.
-        - 0x07 # 2.7v - micbias1 volage is 2.7v.
-        - 0x08 # 2.8v - micbias1 volage is 2.8v.
-        - 0x09 # 2.85v - micbias1 volage is 2.85v.
-
-  mediatek,mic-mode:
-    maxItems: 1
-    description: |
-      value as 1, 2, 6 to indicate ACC/DCC mode. default is DCC mode 2.
-
-      enum:
-        - 0x01 # ACC - ACC mode.
-        - 0x02 # DCC - low cost without in bias.
-        - 0x06 # DCC - low cost with in bias.
-
-  mediatek,pwm-deb-setting:
-    maxItems: 15
-    description: |
-       headset-mode-setting : Indicates customized pwm, debounce setting
-       accdet pwm_width, pwm_thresh, fall_delay, rise_delay
-       debounce0, debounce1, debounce3, debounce4
-       eint pwm_width, eint pwm_thresh
-       eint deb(debounce0, debounce1, debounce2, debounce3), inv_debounce.
-
-  mediatek,eint-use-ap:
-    maxItems: 1
-    description: |
-      indicates to use ap gpio.
-
-      enum:
-        - 0x00 # MT6359 eint detection mode.
-        - 0x01 # SoC GPIO detection mode.
-
-  mediatek,eint-detect-mode:
-    maxItems: 1
-    description: |
-      indicates to use ap gpio.
-
-      enum:
-        - 0x00 # detection mode with higher detection power.
-        - 0x01 # detection mode with lower detection power.
-        - 0x02 # detection mode with sw moisture detection mode.
-        - 0x03 # detection mode with hw moisture detection mode1.
-        - 0x04 # detection mode with hw moisture detection mode2.
-
-  mediatek,eint-num:
-    maxItems: 1
-    description: |
-      incicates pmic eint usage.
-
-      enum:
-        - 0x0 # PMIC_EINT0 - use pmic eint0 to trigger plug interrupt.
-        - 0x1 # PMIC_EINT1 - use pmic eint1 to trigger plug interrupt.
-        - 0x2 # PMIC_BI_EINT - use pmic eint0/1 to trigger plug interrupt.
-
-  mediatek,eint-trig-mode:
-    maxItems: 1
-    description: |
-      incicates pmic eint trigger mode.
-
-      enum:
-        - 0x0 # PMIC_GPIO - use pmic gpio to detect plug status.
-        - 0x1 # PMIC_INVERTER - use pmic inverter to detect plug status.
-
-  mediatek,eint-use-ext-res:
-    maxItems: 1
-    description: |
-      select HP_EINT pull up resistance, default 0 use internal resistance.
-
-      enum:
-        - 0x0 # use internal resistor.
-        - 0x1 # use external resistor.
-
-  mediatek,eint-comp-vth:
-    maxItems: 1
-    description: |
-      indicates comparator detection voltage.
-
-      enum:
-        - 0x00 # 2.8v.
-        - 0x01 # 2.4v.
-        - 0x02 # 2.0v.
-        - 0x03 # 0.7v.
-
-  mediatek,key-mode:
-    maxItems: 1
-    description: |
-      incicates key mode type.
-
-      enum:
-        - 0x0 # THREE_KEY - support 3-key key mode.
-        - 0x1 # FOUR_KEY - support 4-key key mode.
-        - 0x2 # TRI_KEY_CDD - support 3-key google CDD key mode.
-
-  mediatek,three-key-thr:
-    maxItems: 4
-    description: |
-      3 key device detection threshold: 0--MD_MAX--UP_MAX--DW_MAX.
-
-  mediatek,tri-key-cdd-thr:
-    maxItems: 4
-    description: |
-      3 key CDD device detection threshold: 0--MD_MAX--UP_MAX--DW_MAX.
-
-  mediatek,four-key-thr:
-    maxItems: 4
-    description: |
-      4 key device detection threshold: 0--MD_MAX--VOICE_MAX--UP_MAX--DW_MAX.
-
-additionalProperties: false
-
-examples:
-  - |
-    accdet: accdet {
-        mediatek,accdet-name = "mt6359-accdet";
-        mediatek,mic-vol = <8>;
-        mediatek,mic-mode = <2>;
-        mediatek,pwm-deb-setting = <0x500 0x500 1 0x1f0
-                                    0x800 0x800 0x20 0x44
-                                    0x4 0x1
-                                    0x5 0x3 0x3 0x5 0xe>;
-        mediatek,eint-use-ap = <0>;
-        mediatek,eint-detect-mode = <4>;
-        mediatek,eint-num = <0>;
-        mediatek,eint-trig-mode = <1>;
-        mediatek,eint-use-ext-res = <0>;
-        mediatek,eint-comp-vth = <2>;
-        mediatek,key-mode = <0>;
-        mediatek,three-key-thr = <0 80 220 400>;
-        status = "okay";
-    };
-...