| Message ID | 20210420102929.13505-1-michael@walle.cc (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 8f7e876273e294b732b42af2e5e6bba91d798954 |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [net-next,v2] net: phy: at803x: fix probe error if copper page is selected | expand |
| Context | Check | Description |
|---|---|---|
| netdev/cover_letter | success | Link |
| netdev/fixes_present | success | Link |
| netdev/patch_count | success | Link |
| netdev/tree_selection | success | Clearly marked for net-next |
| netdev/subject_prefix | success | Link |
| netdev/cc_maintainers | success | CCed 7 of 7 maintainers |
| netdev/source_inline | success | Was 0 now: 0 |
| netdev/verify_signedoff | success | Link |
| netdev/module_param | success | Was 0 now: 0 |
| netdev/build_32bit | fail | Errors and warnings before: 6 this patch: 6 |
| netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
| netdev/verify_fixes | success | Link |
| netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 42 lines checked |
| netdev/build_allmodconfig_warn | success | Errors and warnings before: 0 this patch: 0 |
| netdev/header_inline | success | Link |
Hi, On 4/20/21 12:29 PM, Michael Walle wrote: > The commit c329e5afb42f ("net: phy: at803x: select correct page on > config init") selects the copper page during probe. This fails if the > copper page was already selected. In this case, the value of the copper > page (which is 1) is propagated through phy_restore_page() and is > finally returned for at803x_probe(). Fix it, by just using the > at803x_page_write() directly. Ouch, i didn't spot that. Thanks for taking care. > > Also in case of an error, the regulator is not disabled and leads to a > WARN_ON() when the probe fails. This couldn't happen before, because > at803x_parse_dt() was the last call in at803x_probe(). It is hard to > see, that the parse_dt() actually enables the regulator. Thus move the > regulator_enable() to the probe function and undo it in case of an > error. > > Fixes: c329e5afb42f ("net: phy: at803x: select correct page on config init") > Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: David Bauer <mail@david-bauer.net> Best David > --- > Changes since v1: > - take the bus lock > > drivers/net/phy/at803x.c | 23 +++++++++++++++++------ > 1 file changed, 17 insertions(+), 6 deletions(-) > > diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c > index e0f56850edc5..32af52dd5aed 100644 > --- a/drivers/net/phy/at803x.c > +++ b/drivers/net/phy/at803x.c > @@ -554,10 +554,6 @@ static int at803x_parse_dt(struct phy_device *phydev) > phydev_err(phydev, "failed to get VDDIO regulator\n"); > return PTR_ERR(priv->vddio); > } > - > - ret = regulator_enable(priv->vddio); > - if (ret < 0) > - return ret; > } > > return 0; > @@ -579,15 +575,30 @@ static int at803x_probe(struct phy_device *phydev) > if (ret) > return ret; > > + if (priv->vddio) { > + ret = regulator_enable(priv->vddio); > + if (ret < 0) > + return ret; > + } > + > /* Some bootloaders leave the fiber page selected. > * Switch to the copper page, as otherwise we read > * the PHY capabilities from the fiber side. > */ > if (at803x_match_phy_id(phydev, ATH8031_PHY_ID)) { > - ret = phy_select_page(phydev, AT803X_PAGE_COPPER); > - ret = phy_restore_page(phydev, AT803X_PAGE_COPPER, ret); > + phy_lock_mdio_bus(phydev); > + ret = at803x_write_page(phydev, AT803X_PAGE_COPPER); > + phy_unlock_mdio_bus(phydev); > + if (ret) > + goto err; > } > > + return 0; > + > +err: > + if (priv->vddio) > + regulator_disable(priv->vddio); > + > return ret; > } > >
Hello: This patch was applied to netdev/net-next.git (refs/heads/master): On Tue, 20 Apr 2021 12:29:29 +0200 you wrote: > The commit c329e5afb42f ("net: phy: at803x: select correct page on > config init") selects the copper page during probe. This fails if the > copper page was already selected. In this case, the value of the copper > page (which is 1) is propagated through phy_restore_page() and is > finally returned for at803x_probe(). Fix it, by just using the > at803x_page_write() directly. > > [...] Here is the summary with links: - [net-next,v2] net: phy: at803x: fix probe error if copper page is selected https://git.kernel.org/netdev/net-next/c/8f7e876273e2 You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index e0f56850edc5..32af52dd5aed 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -554,10 +554,6 @@ static int at803x_parse_dt(struct phy_device *phydev) phydev_err(phydev, "failed to get VDDIO regulator\n"); return PTR_ERR(priv->vddio); } - - ret = regulator_enable(priv->vddio); - if (ret < 0) - return ret; } return 0; @@ -579,15 +575,30 @@ static int at803x_probe(struct phy_device *phydev) if (ret) return ret; + if (priv->vddio) { + ret = regulator_enable(priv->vddio); + if (ret < 0) + return ret; + } + /* Some bootloaders leave the fiber page selected. * Switch to the copper page, as otherwise we read * the PHY capabilities from the fiber side. */ if (at803x_match_phy_id(phydev, ATH8031_PHY_ID)) { - ret = phy_select_page(phydev, AT803X_PAGE_COPPER); - ret = phy_restore_page(phydev, AT803X_PAGE_COPPER, ret); + phy_lock_mdio_bus(phydev); + ret = at803x_write_page(phydev, AT803X_PAGE_COPPER); + phy_unlock_mdio_bus(phydev); + if (ret) + goto err; } + return 0; + +err: + if (priv->vddio) + regulator_disable(priv->vddio); + return ret; }
The commit c329e5afb42f ("net: phy: at803x: select correct page on config init") selects the copper page during probe. This fails if the copper page was already selected. In this case, the value of the copper page (which is 1) is propagated through phy_restore_page() and is finally returned for at803x_probe(). Fix it, by just using the at803x_page_write() directly. Also in case of an error, the regulator is not disabled and leads to a WARN_ON() when the probe fails. This couldn't happen before, because at803x_parse_dt() was the last call in at803x_probe(). It is hard to see, that the parse_dt() actually enables the regulator. Thus move the regulator_enable() to the probe function and undo it in case of an error. Fixes: c329e5afb42f ("net: phy: at803x: select correct page on config init") Signed-off-by: Michael Walle <michael@walle.cc> --- Changes since v1: - take the bus lock drivers/net/phy/at803x.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-)