| Message ID | 20210416075113.18047-1-zev@bewilderbeest.net (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: aspeed: update e3c246d4i vuart properties | expand |
On Fri, 16 Apr 2021, at 17:21, Zev Weiss wrote: > This device-tree was merged with a provisional vuart IRQ-polarity > property that was still under review and ended up taking a somewhat > different form. This patch updates it to match the final form of the > new vuart properties, which additionally allow specifying the SIRQ > number and LPC address. > > Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
On Fri, 16 Apr 2021 at 07:52, Zev Weiss <zev@bewilderbeest.net> wrote: > > This device-tree was merged with a provisional vuart IRQ-polarity > property that was still under review and ended up taking a somewhat > different form. This patch updates it to match the final form of the > new vuart properties, which additionally allow specifying the SIRQ > number and LPC address. > > Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Fixes: ca03042f0f12 ("serial: 8250_aspeed_vuart: add aspeed, lpc-io-reg and aspeed, lpc-interrupts DT properties") Reviewed-by: Joel Stanley <joel@jms.id.au> > --- > > The relevant aspeed-vuart patches [0] have been merged into Greg KH's > tty-next tree, so I figure it's probably okay to proceed with the > corresponding dts adjustments now. > > [0] https://lore.kernel.org/openbmc/20210412034712.16778-1-zev@bewilderbeest.net/ > > arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts > index dcab6e78dfa4..8be40c8283af 100644 > --- a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts > +++ b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts > @@ -4,6 +4,7 @@ > #include "aspeed-g5.dtsi" > #include <dt-bindings/gpio/aspeed-gpio.h> > #include <dt-bindings/i2c/i2c.h> > +#include <dt-bindings/interrupt-controller/irq.h> > > /{ > model = "ASRock E3C246D4I BMC"; > @@ -73,7 +74,8 @@ &uart5 { > > &vuart { > status = "okay"; > - aspeed,sirq-active-high; > + aspeed,lpc-io-reg = <0x2f8>; > + aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; > }; > > &mac0 { > -- > 2.31.1 >
diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts index dcab6e78dfa4..8be40c8283af 100644 --- a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts +++ b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts @@ -4,6 +4,7 @@ #include "aspeed-g5.dtsi" #include <dt-bindings/gpio/aspeed-gpio.h> #include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/interrupt-controller/irq.h> /{ model = "ASRock E3C246D4I BMC"; @@ -73,7 +74,8 @@ &uart5 { &vuart { status = "okay"; - aspeed,sirq-active-high; + aspeed,lpc-io-reg = <0x2f8>; + aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; }; &mac0 {
This device-tree was merged with a provisional vuart IRQ-polarity property that was still under review and ended up taking a somewhat different form. This patch updates it to match the final form of the new vuart properties, which additionally allow specifying the SIRQ number and LPC address. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> --- The relevant aspeed-vuart patches [0] have been merged into Greg KH's tty-next tree, so I figure it's probably okay to proceed with the corresponding dts adjustments now. [0] https://lore.kernel.org/openbmc/20210412034712.16778-1-zev@bewilderbeest.net/ arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)