[v18,43/83] sg: no_dxfer: move to/from kernel buffers

Commit Message

Douglas Gilbert April 27, 2021, 9:56 p.m. UTC

When the NO_DXFER flag is use on a command/request, the data-in
and data-out buffers (if present) should not be ignored. Add
sg_rq_map_kern() function to handle this. Uses a single bio with
multiple bvec_s usually each holding multiple pages, if necessary.
The driver default element size is 32 KiB so if PAGE_SIZE is 4096
then get_order()==3 .

Signed-off-by: Douglas Gilbert <[e-mail]>
---
 drivers/scsi/sg.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

Comments

Hannes Reinecke April 28, 2021, 7:07 a.m. UTC | #1

On 4/27/21 11:56 PM, Douglas Gilbert wrote:
> When the NO_DXFER flag is use on a command/request, the data-in
> and data-out buffers (if present) should not be ignored. Add
> sg_rq_map_kern() function to handle this. Uses a single bio with
> multiple bvec_s usually each holding multiple pages, if necessary.
> The driver default element size is 32 KiB so if PAGE_SIZE is 4096
> then get_order()==3 .
> 
> Signed-off-by: Douglas Gilbert <[e-mail]>
> ---
>  drivers/scsi/sg.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 59 insertions(+)
> Reviewed-by: Hannes Reinecke <[e-mail]>

Cheers,

Hannes

Patch

diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 1e187ecbf0ae..9e93047bcb0f 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -2848,6 +2848,63 @@  exit_sg(void)
 	idr_destroy(&sg_index_idr);
 }
 
+static struct bio *
+sg_mk_kern_bio(int bvec_cnt)
+{
+	struct bio *biop;
+
+	if (bvec_cnt > BIO_MAX_PAGES)
+		return NULL;
+	biop = bio_alloc(GFP_ATOMIC, bvec_cnt);
+	if (!biop)
+		return NULL;
+	biop->bi_end_io = bio_put;
+	return biop;
+}
+
+/*
+ * Setup to move data between kernel buffers managed by this driver and a SCSI device. Note that
+ * there is no corresponding 'unmap' call as is required by blk_rq_map_user() . Uses a single
+ * bio with an expanded appended bvec if necessary.
+ */
+static int
+sg_rq_map_kern(struct sg_request *srp, struct request_queue *q, struct request *rqq, int rw_ind)
+{
+	struct sg_scatter_hold *schp = &srp->sgat_h;
+	struct bio *bio;
+	int k, ln;
+	int op_flags = 0;
+	int num_sgat = schp->num_sgat;
+	int dlen = schp->dlen;
+	int pg_sz = 1 << (PAGE_SHIFT + schp->page_order);
+	int num_segs = (1 << schp->page_order) * num_sgat;
+	int res = 0;
+
+	SG_LOG(4, srp->parentfp, "%s: dlen=%d, pg_sz=%d\n", __func__, dlen, pg_sz);
+	if (num_sgat <= 0)
+		return 0;
+	if (rw_ind == WRITE)
+		op_flags = REQ_SYNC | REQ_IDLE;
+	bio = sg_mk_kern_bio(num_sgat);
+	if (!bio)
+		return -ENOMEM;
+	bio->bi_opf = req_op(rqq) | op_flags;
+
+	for (k = 0; k < num_sgat && dlen > 0; ++k, dlen -= ln) {
+		ln = min_t(int, dlen, pg_sz);
+		if (bio_add_pc_page(q, bio, schp->pages[k], ln, 0) < ln) {
+			bio_put(bio);
+			return -EINVAL;
+		}
+	}
+	res = blk_rq_append_bio(rqq, &bio);
+	if (unlikely(res))
+		bio_put(bio);
+	else
+		rqq->nr_phys_segments = num_segs;
+	return res;
+}
+
 static inline void
 sg_set_map_data(const struct sg_scatter_hold *schp, bool up_valid,
 		struct rq_map_data *mdp)
@@ -3009,6 +3066,8 @@  sg_start_req(struct sg_request *srp, struct sg_comm_wr_t *cwrp, int dxfer_dir)
 		if (IS_ENABLED(CONFIG_SCSI_PROC_FS) && res)
 			SG_LOG(1, sfp, "%s: blk_rq_map_user() res=%d\n",
 			       __func__, res);
+	} else {	/* transfer data to/from kernel buffers */
+		res = sg_rq_map_kern(srp, q, rqq, r0w);
 	}
 fini:
 	if (unlikely(res)) {		/* failure, free up resources */