Message ID | 1618407316-10042-4-git-send-email-rex-bc.chen@mediatek.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | mt8183 dpi supports dual edge | expand |
Hi, Rex: On Wed, 2021-04-14 at 21:35 +0800, Rex-BC Chen wrote: > Add the atomic_get_output_bus_fmts, atomic_get_input_bus_fmts to negotiate > the possible output and input formats for the current mode and monitor, > and use the negotiated formats in a basic atomic_check callback. > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> > Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> > --- > drivers/gpu/drm/mediatek/mtk_dpi.c | 89 ++++++++++++++++++++++++++++-- > 1 file changed, 84 insertions(+), 5 deletions(-) > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c > index 76431fe849b8..b4e9c6c8d706 100644 > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c > @@ -536,6 +536,87 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, > return 0; > } > > +#define MAX_OUTPUT_SEL_FORMATS 2 > + > +static u32 *mtk_dpi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge, > + struct drm_bridge_state *bridge_state, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn_state, > + unsigned int *num_output_fmts) > +{ > + struct drm_display_mode *mode = &crtc_state->mode; > + u32 *output_fmts; > + struct mtk_dpi *dpi = bridge_to_dpi(bridge); > + > + *num_output_fmts = 0; > + > + output_fmts = kcalloc(MAX_OUTPUT_SEL_FORMATS, sizeof(*output_fmts), > + GFP_KERNEL); > + if (!output_fmts) > + return NULL; > + > + /* Default 8bit RGB fallback */ > + if (dpi->conf->dual_edge) { > + output_fmts[0] = MEDIA_BUS_FMT_RGB888_2X12_LE; > + output_fmts[1] = MEDIA_BUS_FMT_RGB888_2X12_BE; MT8183 does not support MEDIA_BUS_FMT_RGB888_1X24? Regards, CK > + *num_output_fmts = 2; > + } else { > + output_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24; > + *num_output_fmts = 1; > + } > + > + return output_fmts; > +} > + > +#define MAX_INPUT_SEL_FORMATS 1 > + > +static u32 *mtk_dpi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge, > + struct drm_bridge_state *bridge_state, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn_state, > + u32 output_fmt, > + unsigned int *num_input_fmts) > +{ > + u32 *input_fmts; > + > + *num_input_fmts = 0; > + > + input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts), > + GFP_KERNEL); > + if (!input_fmts) > + return NULL; > + > + *num_input_fmts = 1; > + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24; > + > + return input_fmts; > +} > + > +static int mtk_dpi_bridge_atomic_check(struct drm_bridge *bridge, > + struct drm_bridge_state *bridge_state, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn_state) > +{ > + struct mtk_dpi *dpi = bridge->driver_private; > + unsigned int out_bus_format; > + > + out_bus_format = bridge_state->output_bus_cfg.format; > + > + dev_dbg(dpi->dev, "input format 0x%04x, output format 0x%04x\n", > + bridge_state->input_bus_cfg.format, > + bridge_state->output_bus_cfg.format); > + > + dpi->ddr_edge_sel = (out_bus_format == MEDIA_BUS_FMT_RGB888_2X12_LE) ? > + true : false; > + > + dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS; > + dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB; > + dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB; > + dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB; > + > + return 0; > +} > + > static int mtk_dpi_bridge_attach(struct drm_bridge *bridge, > enum drm_bridge_attach_flags flags) > { > @@ -574,6 +655,9 @@ static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = { > .mode_set = mtk_dpi_bridge_mode_set, > .disable = mtk_dpi_bridge_disable, > .enable = mtk_dpi_bridge_enable, > + .atomic_check = mtk_dpi_bridge_atomic_check, > + .atomic_get_output_bus_fmts = mtk_dpi_bridge_atomic_get_output_bus_fmts, > + .atomic_get_input_bus_fmts = mtk_dpi_bridge_atomic_get_input_bus_fmts, > }; > > void mtk_dpi_start(struct device *dev) > @@ -620,11 +704,6 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data) > } > drm_connector_attach_encoder(dpi->connector, &dpi->encoder); > > - dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS; > - dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB; > - dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB; > - dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB; > - > return 0; > > err_cleanup:
On Thu, 2021-04-15 at 09:09 +0800, CK Hu wrote: Hello CK, > Hi, Rex: > > On Wed, 2021-04-14 at 21:35 +0800, Rex-BC Chen wrote: > > Add the atomic_get_output_bus_fmts, atomic_get_input_bus_fmts to negotiate > > the possible output and input formats for the current mode and monitor, > > and use the negotiated formats in a basic atomic_check callback. > > > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> > > Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> > > --- > > drivers/gpu/drm/mediatek/mtk_dpi.c | 89 ++++++++++++++++++++++++++++-- > > 1 file changed, 84 insertions(+), 5 deletions(-) > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c > > index 76431fe849b8..b4e9c6c8d706 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c > > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c > > @@ -536,6 +536,87 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, > > return 0; > > } > > > > +#define MAX_OUTPUT_SEL_FORMATS 2 > > + > > +static u32 *mtk_dpi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge, > > + struct drm_bridge_state *bridge_state, > > + struct drm_crtc_state *crtc_state, > > + struct drm_connector_state *conn_state, > > + unsigned int *num_output_fmts) > > +{ > > + struct drm_display_mode *mode = &crtc_state->mode; > > + u32 *output_fmts; > > + struct mtk_dpi *dpi = bridge_to_dpi(bridge); > > + > > + *num_output_fmts = 0; > > + > > + output_fmts = kcalloc(MAX_OUTPUT_SEL_FORMATS, sizeof(*output_fmts), > > + GFP_KERNEL); > > + if (!output_fmts) > > + return NULL; > > + > > + /* Default 8bit RGB fallback */ > > + if (dpi->conf->dual_edge) { > > + output_fmts[0] = MEDIA_BUS_FMT_RGB888_2X12_LE; > > + output_fmts[1] = MEDIA_BUS_FMT_RGB888_2X12_BE; > > MT8183 does not support MEDIA_BUS_FMT_RGB888_1X24? > > Regards, > CK > Yes, MT8183 only support MEDIA_BUS_FMT_RGB888_1X24 BRs, Rex-BC > > + *num_output_fmts = 2; > > + } else { > > + output_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24; > > + *num_output_fmts = 1; > > + } > > + > > + return output_fmts; > > +} > > + > > +#define MAX_INPUT_SEL_FORMATS 1 > > + > > +static u32 *mtk_dpi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge, > > + struct drm_bridge_state *bridge_state, > > + struct drm_crtc_state *crtc_state, > > + struct drm_connector_state *conn_state, > > + u32 output_fmt, > > + unsigned int *num_input_fmts) > > +{ > > + u32 *input_fmts; > > + > > + *num_input_fmts = 0; > > + > > + input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts), > > + GFP_KERNEL); > > + if (!input_fmts) > > + return NULL; > > + > > + *num_input_fmts = 1; > > + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24; > > + > > + return input_fmts; > > +} > > + > > +static int mtk_dpi_bridge_atomic_check(struct drm_bridge *bridge, > > + struct drm_bridge_state *bridge_state, > > + struct drm_crtc_state *crtc_state, > > + struct drm_connector_state *conn_state) > > +{ > > + struct mtk_dpi *dpi = bridge->driver_private; > > + unsigned int out_bus_format; > > + > > + out_bus_format = bridge_state->output_bus_cfg.format; > > + > > + dev_dbg(dpi->dev, "input format 0x%04x, output format 0x%04x\n", > > + bridge_state->input_bus_cfg.format, > > + bridge_state->output_bus_cfg.format); > > + > > + dpi->ddr_edge_sel = (out_bus_format == MEDIA_BUS_FMT_RGB888_2X12_LE) ? > > + true : false; > > + > > + dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS; > > + dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB; > > + dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB; > > + dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB; > > + > > + return 0; > > +} > > + > > static int mtk_dpi_bridge_attach(struct drm_bridge *bridge, > > enum drm_bridge_attach_flags flags) > > { > > @@ -574,6 +655,9 @@ static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = { > > .mode_set = mtk_dpi_bridge_mode_set, > > .disable = mtk_dpi_bridge_disable, > > .enable = mtk_dpi_bridge_enable, > > + .atomic_check = mtk_dpi_bridge_atomic_check, > > + .atomic_get_output_bus_fmts = mtk_dpi_bridge_atomic_get_output_bus_fmts, > > + .atomic_get_input_bus_fmts = mtk_dpi_bridge_atomic_get_input_bus_fmts, > > }; > > > > void mtk_dpi_start(struct device *dev) > > @@ -620,11 +704,6 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data) > > } > > drm_connector_attach_encoder(dpi->connector, &dpi->encoder); > > > > - dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS; > > - dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB; > > - dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB; > > - dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB; > > - > > return 0; > > > > err_cleanup: > >
Hi, Rex: On Thu, 2021-04-15 at 14:14 +0800, Rex-BC Chen wrote: > On Thu, 2021-04-15 at 09:09 +0800, CK Hu wrote: > Hello CK, > > Hi, Rex: > > > > On Wed, 2021-04-14 at 21:35 +0800, Rex-BC Chen wrote: > > > Add the atomic_get_output_bus_fmts, atomic_get_input_bus_fmts to negotiate > > > the possible output and input formats for the current mode and monitor, > > > and use the negotiated formats in a basic atomic_check callback. > > > > > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> > > > Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> > > > --- > > > drivers/gpu/drm/mediatek/mtk_dpi.c | 89 ++++++++++++++++++++++++++++-- > > > 1 file changed, 84 insertions(+), 5 deletions(-) > > > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c > > > index 76431fe849b8..b4e9c6c8d706 100644 > > > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c > > > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c > > > @@ -536,6 +536,87 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, > > > return 0; > > > } > > > > > > +#define MAX_OUTPUT_SEL_FORMATS 2 > > > + > > > +static u32 *mtk_dpi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge, > > > + struct drm_bridge_state *bridge_state, > > > + struct drm_crtc_state *crtc_state, > > > + struct drm_connector_state *conn_state, > > > + unsigned int *num_output_fmts) > > > +{ > > > + struct drm_display_mode *mode = &crtc_state->mode; > > > + u32 *output_fmts; > > > + struct mtk_dpi *dpi = bridge_to_dpi(bridge); > > > + > > > + *num_output_fmts = 0; > > > + > > > + output_fmts = kcalloc(MAX_OUTPUT_SEL_FORMATS, sizeof(*output_fmts), > > > + GFP_KERNEL); > > > + if (!output_fmts) > > > + return NULL; > > > + > > > + /* Default 8bit RGB fallback */ > > > + if (dpi->conf->dual_edge) { > > > + output_fmts[0] = MEDIA_BUS_FMT_RGB888_2X12_LE; > > > + output_fmts[1] = MEDIA_BUS_FMT_RGB888_2X12_BE; > > > > MT8183 does not support MEDIA_BUS_FMT_RGB888_1X24? > > > > Regards, > > CK > > > Yes, MT8183 only support MEDIA_BUS_FMT_RGB888_1X24 I'm confused with this answer. dpi->conf->dual_edge is true only in mt8183, but you say 'MT8183 only support MEDIA_BUS_FMT_RGB888_1X24', your answer looks conflict with these code. Regards, CK > > BRs, > Rex-BC > > > + *num_output_fmts = 2; > > > + } else { > > > + output_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24; > > > + *num_output_fmts = 1; > > > + } > > > + > > > + return output_fmts; > > > +} > > > + > > > +#define MAX_INPUT_SEL_FORMATS 1 > > > + > > > +static u32 *mtk_dpi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge, > > > + struct drm_bridge_state *bridge_state, > > > + struct drm_crtc_state *crtc_state, > > > + struct drm_connector_state *conn_state, > > > + u32 output_fmt, > > > + unsigned int *num_input_fmts) > > > +{ > > > + u32 *input_fmts; > > > + > > > + *num_input_fmts = 0; > > > + > > > + input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts), > > > + GFP_KERNEL); > > > + if (!input_fmts) > > > + return NULL; > > > + > > > + *num_input_fmts = 1; > > > + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24; > > > + > > > + return input_fmts; > > > +} > > > + > > > +static int mtk_dpi_bridge_atomic_check(struct drm_bridge *bridge, > > > + struct drm_bridge_state *bridge_state, > > > + struct drm_crtc_state *crtc_state, > > > + struct drm_connector_state *conn_state) > > > +{ > > > + struct mtk_dpi *dpi = bridge->driver_private; > > > + unsigned int out_bus_format; > > > + > > > + out_bus_format = bridge_state->output_bus_cfg.format; > > > + > > > + dev_dbg(dpi->dev, "input format 0x%04x, output format 0x%04x\n", > > > + bridge_state->input_bus_cfg.format, > > > + bridge_state->output_bus_cfg.format); > > > + > > > + dpi->ddr_edge_sel = (out_bus_format == MEDIA_BUS_FMT_RGB888_2X12_LE) ? > > > + true : false; > > > + > > > + dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS; > > > + dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB; > > > + dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB; > > > + dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB; > > > + > > > + return 0; > > > +} > > > + > > > static int mtk_dpi_bridge_attach(struct drm_bridge *bridge, > > > enum drm_bridge_attach_flags flags) > > > { > > > @@ -574,6 +655,9 @@ static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = { > > > .mode_set = mtk_dpi_bridge_mode_set, > > > .disable = mtk_dpi_bridge_disable, > > > .enable = mtk_dpi_bridge_enable, > > > + .atomic_check = mtk_dpi_bridge_atomic_check, > > > + .atomic_get_output_bus_fmts = mtk_dpi_bridge_atomic_get_output_bus_fmts, > > > + .atomic_get_input_bus_fmts = mtk_dpi_bridge_atomic_get_input_bus_fmts, > > > }; > > > > > > void mtk_dpi_start(struct device *dev) > > > @@ -620,11 +704,6 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data) > > > } > > > drm_connector_attach_encoder(dpi->connector, &dpi->encoder); > > > > > > - dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS; > > > - dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB; > > > - dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB; > > > - dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB; > > > - > > > return 0; > > > > > > err_cleanup: > > > > > > _______________________________________________ > Linux-mediatek mailing list > Linux-mediatek@lists.infradead.org > https://urldefense.com/v3/__http://lists.infradead.org/mailman/listinfo/linux-mediatek__;!!CTRNKA9wMg0ARbw!wSbSRrRV87zBpi29W3qMJC0hPE5QwMj2oVUgPcq4538Poo-n0KFyM14woxJZbA$
On Tue, 2021-04-20 at 16:31 +0800, CK Hu wrote: > Hi, Rex: > > On Thu, 2021-04-15 at 14:14 +0800, Rex-BC Chen wrote: > > On Thu, 2021-04-15 at 09:09 +0800, CK Hu wrote: > > Hello CK, > > > Hi, Rex: > > > > > > On Wed, 2021-04-14 at 21:35 +0800, Rex-BC Chen wrote: > > > > Add the atomic_get_output_bus_fmts, atomic_get_input_bus_fmts > > > > to negotiate > > > > the possible output and input formats for the current mode and > > > > monitor, > > > > and use the negotiated formats in a basic atomic_check > > > > callback. > > > > > > > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> > > > > Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> > > > > --- > > > > drivers/gpu/drm/mediatek/mtk_dpi.c | 89 > > > > ++++++++++++++++++++++++++++-- > > > > 1 file changed, 84 insertions(+), 5 deletions(-) > > > > > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c > > > > b/drivers/gpu/drm/mediatek/mtk_dpi.c > > > > index 76431fe849b8..b4e9c6c8d706 100644 > > > > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c > > > > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c > > > > @@ -536,6 +536,87 @@ static int mtk_dpi_set_display_mode(struct > > > > mtk_dpi *dpi, > > > > return 0; > > > > } > > > > > > > > +#define MAX_OUTPUT_SEL_FORMATS 2 > > > > + > > > > +static u32 *mtk_dpi_bridge_atomic_get_output_bus_fmts(struct > > > > drm_bridge *bridge, > > > > + struct drm_bridge_state > > > > *bridge_state, > > > > + struct drm_crtc_state > > > > *crtc_state, > > > > + struct > > > > drm_connector_state *conn_state, > > > > + unsigned int > > > > *num_output_fmts) > > > > +{ > > > > + struct drm_display_mode *mode = &crtc_state->mode; > > > > + u32 *output_fmts; > > > > + struct mtk_dpi *dpi = bridge_to_dpi(bridge); > > > > + > > > > + *num_output_fmts = 0; > > > > + > > > > + output_fmts = kcalloc(MAX_OUTPUT_SEL_FORMATS, > > > > sizeof(*output_fmts), > > > > + GFP_KERNEL); > > > > + if (!output_fmts) > > > > + return NULL; > > > > + > > > > + /* Default 8bit RGB fallback */ > > > > + if (dpi->conf->dual_edge) { > > > > + output_fmts[0] = MEDIA_BUS_FMT_RGB888_2X12_LE; > > > > + output_fmts[1] = MEDIA_BUS_FMT_RGB888_2X12_BE; > > > > > > MT8183 does not support MEDIA_BUS_FMT_RGB888_1X24? > > > > > > Regards, > > > CK > > > > > > > Yes, MT8183 only support MEDIA_BUS_FMT_RGB888_1X24 > > I'm confused with this answer. dpi->conf->dual_edge is true only in > mt8183, but you say 'MT8183 only support MEDIA_BUS_FMT_RGB888_1X24', > your answer looks conflict with these code. > > Regards, > CK > Hello CK, Sorry for my typo. Input format for DPI in MT8183 only supports MEDIA_BUS_FMT_RGB888_1X24. Output format for DPI in MT8183 only supports MEDIA_BUS_FMT_RGB888_2x12. dpi->conf->dual_edge means output format. So MT8183 only support MEDIA_BUS_FMT_RGB888_2x12. BRs, Rex-BC > > > > BRs, > > Rex-BC > > > > + *num_output_fmts = 2; > > > > + } else { > > > > + output_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24; > > > > + *num_output_fmts = 1; > > > > + } > > > > + > > > > + return output_fmts; > > > > +} > > > > + > > > > +#define MAX_INPUT_SEL_FORMATS 1 > > > > + > > > > +static u32 *mtk_dpi_bridge_atomic_get_input_bus_fmts(struct > > > > drm_bridge *bridge, > > > > + struct drm_bridge_state > > > > *bridge_state, > > > > + struct drm_crtc_state > > > > *crtc_state, > > > > + struct > > > > drm_connector_state *conn_state, > > > > + u32 output_fmt, > > > > + unsigned int > > > > *num_input_fmts) > > > > +{ > > > > + u32 *input_fmts; > > > > + > > > > + *num_input_fmts = 0; > > > > + > > > > + input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, > > > > sizeof(*input_fmts), > > > > + GFP_KERNEL); > > > > + if (!input_fmts) > > > > + return NULL; > > > > + > > > > + *num_input_fmts = 1; > > > > + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24; > > > > + > > > > + return input_fmts; > > > > +} > > > > + > > > > +static int mtk_dpi_bridge_atomic_check(struct drm_bridge > > > > *bridge, > > > > + struct drm_bridge_state > > > > *bridge_state, > > > > + struct drm_crtc_state > > > > *crtc_state, > > > > + struct > > > > drm_connector_state *conn_state) > > > > +{ > > > > + struct mtk_dpi *dpi = bridge->driver_private; > > > > + unsigned int out_bus_format; > > > > + > > > > + out_bus_format = bridge_state->output_bus_cfg.format; > > > > + > > > > + dev_dbg(dpi->dev, "input format 0x%04x, output format > > > > 0x%04x\n", > > > > + bridge_state->input_bus_cfg.format, > > > > + bridge_state->output_bus_cfg.format); > > > > + > > > > + dpi->ddr_edge_sel = (out_bus_format == > > > > MEDIA_BUS_FMT_RGB888_2X12_LE) ? > > > > + true : false; > > > > + > > > > + dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS; > > > > + dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB; > > > > + dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB; > > > > + dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB; > > > > + > > > > + return 0; > > > > +} > > > > + > > > > static int mtk_dpi_bridge_attach(struct drm_bridge *bridge, > > > > enum drm_bridge_attach_flags > > > > flags) > > > > { > > > > @@ -574,6 +655,9 @@ static const struct drm_bridge_funcs > > > > mtk_dpi_bridge_funcs = { > > > > .mode_set = mtk_dpi_bridge_mode_set, > > > > .disable = mtk_dpi_bridge_disable, > > > > .enable = mtk_dpi_bridge_enable, > > > > + .atomic_check = mtk_dpi_bridge_atomic_check, > > > > + .atomic_get_output_bus_fmts = > > > > mtk_dpi_bridge_atomic_get_output_bus_fmts, > > > > + .atomic_get_input_bus_fmts = > > > > mtk_dpi_bridge_atomic_get_input_bus_fmts, > > > > }; > > > > > > > > void mtk_dpi_start(struct device *dev) > > > > @@ -620,11 +704,6 @@ static int mtk_dpi_bind(struct device > > > > *dev, struct device *master, void *data) > > > > } > > > > drm_connector_attach_encoder(dpi->connector, &dpi- > > > > >encoder); > > > > > > > > - dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS; > > > > - dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB; > > > > - dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB; > > > > - dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB; > > > > - > > > > return 0; > > > > > > > > err_cleanup: > > > > > > > > > > _______________________________________________ > > Linux-mediatek mailing list > > Linux-mediatek@lists.infradead.org > > https://urldefense.com/v3/__http://lists.infradead.org/mailman/listinfo/linux-mediatek__;!!CTRNKA9wMg0ARbw!wSbSRrRV87zBpi29W3qMJC0hPE5QwMj2oVUgPcq4538Poo-n0KFyM14woxJZbA$ > > > >
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c index 76431fe849b8..b4e9c6c8d706 100644 --- a/drivers/gpu/drm/mediatek/mtk_dpi.c +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c @@ -536,6 +536,87 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, return 0; } +#define MAX_OUTPUT_SEL_FORMATS 2 + +static u32 *mtk_dpi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge, + struct drm_bridge_state *bridge_state, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state, + unsigned int *num_output_fmts) +{ + struct drm_display_mode *mode = &crtc_state->mode; + u32 *output_fmts; + struct mtk_dpi *dpi = bridge_to_dpi(bridge); + + *num_output_fmts = 0; + + output_fmts = kcalloc(MAX_OUTPUT_SEL_FORMATS, sizeof(*output_fmts), + GFP_KERNEL); + if (!output_fmts) + return NULL; + + /* Default 8bit RGB fallback */ + if (dpi->conf->dual_edge) { + output_fmts[0] = MEDIA_BUS_FMT_RGB888_2X12_LE; + output_fmts[1] = MEDIA_BUS_FMT_RGB888_2X12_BE; + *num_output_fmts = 2; + } else { + output_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24; + *num_output_fmts = 1; + } + + return output_fmts; +} + +#define MAX_INPUT_SEL_FORMATS 1 + +static u32 *mtk_dpi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge, + struct drm_bridge_state *bridge_state, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state, + u32 output_fmt, + unsigned int *num_input_fmts) +{ + u32 *input_fmts; + + *num_input_fmts = 0; + + input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts), + GFP_KERNEL); + if (!input_fmts) + return NULL; + + *num_input_fmts = 1; + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24; + + return input_fmts; +} + +static int mtk_dpi_bridge_atomic_check(struct drm_bridge *bridge, + struct drm_bridge_state *bridge_state, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state) +{ + struct mtk_dpi *dpi = bridge->driver_private; + unsigned int out_bus_format; + + out_bus_format = bridge_state->output_bus_cfg.format; + + dev_dbg(dpi->dev, "input format 0x%04x, output format 0x%04x\n", + bridge_state->input_bus_cfg.format, + bridge_state->output_bus_cfg.format); + + dpi->ddr_edge_sel = (out_bus_format == MEDIA_BUS_FMT_RGB888_2X12_LE) ? + true : false; + + dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS; + dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB; + dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB; + dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB; + + return 0; +} + static int mtk_dpi_bridge_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags) { @@ -574,6 +655,9 @@ static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = { .mode_set = mtk_dpi_bridge_mode_set, .disable = mtk_dpi_bridge_disable, .enable = mtk_dpi_bridge_enable, + .atomic_check = mtk_dpi_bridge_atomic_check, + .atomic_get_output_bus_fmts = mtk_dpi_bridge_atomic_get_output_bus_fmts, + .atomic_get_input_bus_fmts = mtk_dpi_bridge_atomic_get_input_bus_fmts, }; void mtk_dpi_start(struct device *dev) @@ -620,11 +704,6 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data) } drm_connector_attach_encoder(dpi->connector, &dpi->encoder); - dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS; - dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB; - dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB; - dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB; - return 0; err_cleanup: