diff mbox series

[net-next,1/4] net: phy: add MediaTek PHY driver

Message ID 20210429062130.29403-2-dqfext@gmail.com (mailing list archive)
State Changes Requested
Delegated to: Netdev Maintainers
Headers show
Series MT7530 interrupt support | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers warning 1 maintainers not CCed: linux-arm-kernel@lists.infradead.org
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit fail Errors and warnings before: 37 this patch: 39
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch warning WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? WARNING: please write a paragraph that describes the config symbol fully
netdev/build_allmodconfig_warn fail Errors and warnings before: 30 this patch: 32
netdev/header_inline success Link

Commit Message

Qingfang Deng April 29, 2021, 6:21 a.m. UTC 
Add support for MediaTek PHYs found in MT7530 and MT7531 switches.
The initialization procedure is from the vendor driver, but due to lack
of documentation, the function of some register values remains unknown.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
---
RFC v4 -> PATCH v1:
- No changes.

 drivers/net/phy/Kconfig    |   5 ++
 drivers/net/phy/Makefile   |   1 +
 drivers/net/phy/mediatek.c | 112 +++++++++++++++++++++++++++++++++++++
 3 files changed, 118 insertions(+)
 create mode 100644 drivers/net/phy/mediatek.c

Comments

Andrew Lunn April 29, 2021, 9:26 p.m. UTC | #1 
On Thu, Apr 29, 2021 at 02:21:27PM +0800, DENG Qingfang wrote:
> Add support for MediaTek PHYs found in MT7530 and MT7531 switches.
> The initialization procedure is from the vendor driver, but due to lack
> of documentation, the function of some register values remains unknown.
> 
> Signed-off-by: DENG Qingfang <dqfext@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

> +
> +	/* Enable HW auto downshift */
> +	phy_modify_paged(phydev, MTK_PHY_PAGE_EXTENDED, 0x14, 0, BIT(4));

As a follow up patch, you could add support for controlling this via a
PHY tunable.

    Andrew
Florian Fainelli April 29, 2021, 11:40 p.m. UTC | #2 
On 4/28/2021 11:21 PM, DENG Qingfang wrote:
> Add support for MediaTek PHYs found in MT7530 and MT7531 switches.
> The initialization procedure is from the vendor driver, but due to lack
> of documentation, the function of some register values remains unknown.
> 
> Signed-off-by: DENG Qingfang <dqfext@gmail.com>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Vladimir Oltean May 6, 2021, 11:33 a.m. UTC | #3 
On Thu, Apr 29, 2021 at 02:21:27PM +0800, DENG Qingfang wrote:
> Add support for MediaTek PHYs found in MT7530 and MT7531 switches.
> The initialization procedure is from the vendor driver, but due to lack
> of documentation, the function of some register values remains unknown.
> 
> Signed-off-by: DENG Qingfang <dqfext@gmail.com>
> ---
> RFC v4 -> PATCH v1:
> - No changes.
> 
>  drivers/net/phy/Kconfig    |   5 ++
>  drivers/net/phy/Makefile   |   1 +
>  drivers/net/phy/mediatek.c | 112 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 118 insertions(+)
>  create mode 100644 drivers/net/phy/mediatek.c
> 
> diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
> index 288bf405ebdb..9db39fb443e6 100644
> --- a/drivers/net/phy/Kconfig
> +++ b/drivers/net/phy/Kconfig
> @@ -207,6 +207,11 @@ config MARVELL_88X2222_PHY
>  	  Support for the Marvell 88X2222 Dual-port Multi-speed Ethernet
>  	  Transceiver.
>  
> +config MEDIATEK_PHY
> +	tristate "MediaTek PHYs"
> +	help
> +	  Supports the MediaTek switch integrated PHYs.
> +
>  config MICREL_PHY
>  	tristate "Micrel PHYs"
>  	help
> diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
> index bcda7ed2455d..ab512cb3592b 100644
> --- a/drivers/net/phy/Makefile
> +++ b/drivers/net/phy/Makefile
> @@ -64,6 +64,7 @@ obj-$(CONFIG_LXT_PHY)		+= lxt.o
>  obj-$(CONFIG_MARVELL_10G_PHY)	+= marvell10g.o
>  obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
>  obj-$(CONFIG_MARVELL_88X2222_PHY)	+= marvell-88x2222.o
> +obj-$(CONFIG_MEDIATEK_PHY)	+= mediatek.o
>  obj-$(CONFIG_MESON_GXL_PHY)	+= meson-gxl.o
>  obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o
>  obj-$(CONFIG_MICREL_PHY)	+= micrel.o
> diff --git a/drivers/net/phy/mediatek.c b/drivers/net/phy/mediatek.c
> new file mode 100644
> index 000000000000..86e6c466b0e9
> --- /dev/null
> +++ b/drivers/net/phy/mediatek.c
> @@ -0,0 +1,112 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +#include <linux/bitfield.h>
> +#include <linux/module.h>
> +#include <linux/phy.h>
> +
> +#define MTK_EXT_PAGE_ACCESS		0x1f
> +#define MTK_PHY_PAGE_STANDARD		0x0000
> +#define MTK_PHY_PAGE_EXTENDED		0x0001
> +#define MTK_PHY_PAGE_EXTENDED_2		0x0002
> +#define MTK_PHY_PAGE_EXTENDED_3		0x0003
> +#define MTK_PHY_PAGE_EXTENDED_2A30	0x2a30
> +#define MTK_PHY_PAGE_EXTENDED_52B5	0x52b5
> +
> +static int mtk_phy_read_page(struct phy_device *phydev)
> +{
> +	return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
> +}
> +
> +static int mtk_phy_write_page(struct phy_device *phydev, int page)
> +{
> +	return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
> +}
> +
> +static void mtk_phy_config_init(struct phy_device *phydev)
> +{
> +	/* Disable EEE */
> +	phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);

Is there any ERR around this (i.e. is the feature universally broken or
just on your setup)? There is a function called of_set_phy_eee_broken,
you can let the PHY core disable EEE advertisement based on device tree.

> +
> +	/* Enable HW auto downshift */
> +	phy_modify_paged(phydev, MTK_PHY_PAGE_EXTENDED, 0x14, 0, BIT(4));
> +
> +	/* Increase SlvDPSready time */
> +	phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
> +	__phy_write(phydev, 0x10, 0xafae);
> +	__phy_write(phydev, 0x12, 0x2f);
> +	__phy_write(phydev, 0x10, 0x8fae);
> +	phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
> +
> +	/* Adjust 100_mse_threshold */
> +	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x123, 0xffff);
> +
> +	/* Disable mcc */
> +	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xa6, 0x300);
> +}
diff mbox series

Patch

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 288bf405ebdb..9db39fb443e6 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -207,6 +207,11 @@  config MARVELL_88X2222_PHY
 	  Support for the Marvell 88X2222 Dual-port Multi-speed Ethernet
 	  Transceiver.
 
+config MEDIATEK_PHY
+	tristate "MediaTek PHYs"
+	help
+	  Supports the MediaTek switch integrated PHYs.
+
 config MICREL_PHY
 	tristate "Micrel PHYs"
 	help
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index bcda7ed2455d..ab512cb3592b 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -64,6 +64,7 @@  obj-$(CONFIG_LXT_PHY)		+= lxt.o
 obj-$(CONFIG_MARVELL_10G_PHY)	+= marvell10g.o
 obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
 obj-$(CONFIG_MARVELL_88X2222_PHY)	+= marvell-88x2222.o
+obj-$(CONFIG_MEDIATEK_PHY)	+= mediatek.o
 obj-$(CONFIG_MESON_GXL_PHY)	+= meson-gxl.o
 obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o
 obj-$(CONFIG_MICREL_PHY)	+= micrel.o
diff --git a/drivers/net/phy/mediatek.c b/drivers/net/phy/mediatek.c
new file mode 100644
index 000000000000..86e6c466b0e9
--- /dev/null
+++ b/drivers/net/phy/mediatek.c
@@ -0,0 +1,112 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+#include <linux/bitfield.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define MTK_EXT_PAGE_ACCESS		0x1f
+#define MTK_PHY_PAGE_STANDARD		0x0000
+#define MTK_PHY_PAGE_EXTENDED		0x0001
+#define MTK_PHY_PAGE_EXTENDED_2		0x0002
+#define MTK_PHY_PAGE_EXTENDED_3		0x0003
+#define MTK_PHY_PAGE_EXTENDED_2A30	0x2a30
+#define MTK_PHY_PAGE_EXTENDED_52B5	0x52b5
+
+static int mtk_phy_read_page(struct phy_device *phydev)
+{
+	return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
+}
+
+static int mtk_phy_write_page(struct phy_device *phydev, int page)
+{
+	return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
+}
+
+static void mtk_phy_config_init(struct phy_device *phydev)
+{
+	/* Disable EEE */
+	phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
+
+	/* Enable HW auto downshift */
+	phy_modify_paged(phydev, MTK_PHY_PAGE_EXTENDED, 0x14, 0, BIT(4));
+
+	/* Increase SlvDPSready time */
+	phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
+	__phy_write(phydev, 0x10, 0xafae);
+	__phy_write(phydev, 0x12, 0x2f);
+	__phy_write(phydev, 0x10, 0x8fae);
+	phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
+
+	/* Adjust 100_mse_threshold */
+	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x123, 0xffff);
+
+	/* Disable mcc */
+	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xa6, 0x300);
+}
+
+static int mt7530_phy_config_init(struct phy_device *phydev)
+{
+	mtk_phy_config_init(phydev);
+
+	/* Increase post_update_timer */
+	phy_write_paged(phydev, MTK_PHY_PAGE_EXTENDED_3, 0x11, 0x4b);
+
+	return 0;
+}
+
+static int mt7531_phy_config_init(struct phy_device *phydev)
+{
+	if (phydev->interface != PHY_INTERFACE_MODE_INTERNAL)
+		return -EINVAL;
+
+	mtk_phy_config_init(phydev);
+
+	/* PHY link down power saving enable */
+	phy_set_bits(phydev, 0x17, BIT(4));
+	phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, 0xc6, 0x300);
+
+	/* Set TX Pair delay selection */
+	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x13, 0x404);
+	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x14, 0x404);
+
+	return 0;
+}
+
+static struct phy_driver mtk_phy_driver[] = {
+	{
+		PHY_ID_MATCH_EXACT(0x03a29412),
+		.name		= "MediaTek MT7530 PHY",
+		.config_init	= mt7530_phy_config_init,
+		/* Interrupts are handled by the switch, not the PHY
+		 * itself.
+		 */
+		.config_intr	= genphy_no_config_intr,
+		.handle_interrupt = genphy_handle_interrupt_no_ack,
+		.read_page	= mtk_phy_read_page,
+		.write_page	= mtk_phy_write_page,
+	},
+	{
+		PHY_ID_MATCH_EXACT(0x03a29441),
+		.name		= "MediaTek MT7531 PHY",
+		.config_init	= mt7531_phy_config_init,
+		/* Interrupts are handled by the switch, not the PHY
+		 * itself.
+		 */
+		.config_intr	= genphy_no_config_intr,
+		.handle_interrupt = genphy_handle_interrupt_no_ack,
+		.read_page	= mtk_phy_read_page,
+		.write_page	= mtk_phy_write_page,
+	},
+};
+
+module_phy_driver(mtk_phy_driver);
+
+static struct mdio_device_id __maybe_unused mtk_phy_tbl[] = {
+	{ PHY_ID_MATCH_VENDOR(0x03a29400) },
+	{ }
+};
+
+MODULE_DESCRIPTION("MediaTek switch integrated PHY driver");
+MODULE_AUTHOR("DENG, Qingfang <dqfext@gmail.com>");
+MODULE_LICENSE("GPL");
+
+MODULE_DEVICE_TABLE(mdio, mtk_phy_tbl);