| Message ID | 3150349be99187c4f9290ac35d6227bb6a83519b.1619621413.git.mchehab+huawei@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | None | expand |
On Wed, 28 Apr 2021 16:51:29 +0200 Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote: > There are several issues in the way the atmel driver handles > pm_runtime_get_sync(): > > - it doesn't check return codes; > - it doesn't properly decrement the usage_count on all places; > - it starts streaming even if pm_runtime_get_sync() fails. > - while it tries to get pm_runtime at the clock enable logic, > it doesn't check if the operation was suceeded. > > Replace all occurrences of it to use the new kAPI: > pm_runtime_resume_and_get(), which ensures that, if the > return code is not negative, the usage_count was incremented. > > With that, add additional checks when this is called, in order > to ensure that errors will be properly addressed. > > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> > --- > drivers/media/platform/atmel/atmel-isc-base.c | 27 ++++++++++++++----- > drivers/media/platform/atmel/atmel-isi.c | 19 ++++++++++--- > 2 files changed, 35 insertions(+), 11 deletions(-) > > diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c > index fe3ec8d0eaee..02543fe42e9d 100644 > --- a/drivers/media/platform/atmel/atmel-isc-base.c > +++ b/drivers/media/platform/atmel/atmel-isc-base.c > @@ -294,9 +294,13 @@ static int isc_wait_clk_stable(struct clk_hw *hw) > static int isc_clk_prepare(struct clk_hw *hw) > { > struct isc_clk *isc_clk = to_isc_clk(hw); > + int ret; > > - if (isc_clk->id == ISC_ISPCK) > - pm_runtime_get_sync(isc_clk->dev); > + if (isc_clk->id == ISC_ISPCK) { > + ret = pm_runtime_resume_and_get(isc_clk->dev); > + if (ret < 0) > + return 0; Why not the error? isc_wait_clk_stable() is happy to return -ETIMEDOUT so I assume the callers should fine with errors. > + } > > return isc_wait_clk_stable(hw); > } > @@ -353,9 +357,13 @@ static int isc_clk_is_enabled(struct clk_hw *hw) > { > struct isc_clk *isc_clk = to_isc_clk(hw); > u32 status; > + int ret; > > - if (isc_clk->id == ISC_ISPCK) > - pm_runtime_get_sync(isc_clk->dev); > + if (isc_clk->id == ISC_ISPCK) { > + ret = pm_runtime_resume_and_get(isc_clk->dev); > + if (ret < 0) > + return 0; > + } > > regmap_read(isc_clk->regmap, ISC_CLKSR, &status); > > @@ -807,7 +815,9 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count) > goto err_start_stream; > } > > - pm_runtime_get_sync(isc->dev); > + ret = pm_runtime_resume_and_get(isc->dev); > + if (ret < 0) > + goto err_pm_get; > > ret = isc_configure(isc); > if (unlikely(ret)) > @@ -838,7 +848,7 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count) > > err_configure: > pm_runtime_put_sync(isc->dev); > - > +err_pm_get: > v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 0); > > err_start_stream: > @@ -1809,6 +1819,7 @@ static void isc_awb_work(struct work_struct *w) > u32 baysel; > unsigned long flags; > u32 min, max; > + int ret; > > /* streaming is not active anymore */ > if (isc->stop) > @@ -1831,7 +1842,9 @@ static void isc_awb_work(struct work_struct *w) > ctrls->hist_id = hist_id; > baysel = isc->config.sd_format->cfa_baycfg << ISC_HIS_CFG_BAYSEL_SHIFT; > > - pm_runtime_get_sync(isc->dev); > + ret = pm_runtime_resume_and_get(isc->dev); > + if (ret < 0) Maybe warn or similar? > + return; > > /* > * only update if we have all the required histograms and controls > diff --git a/drivers/media/platform/atmel/atmel-isi.c b/drivers/media/platform/atmel/atmel-isi.c > index 0514be6153df..6a433926726d 100644 > --- a/drivers/media/platform/atmel/atmel-isi.c > +++ b/drivers/media/platform/atmel/atmel-isi.c > @@ -422,7 +422,9 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count) > struct frame_buffer *buf, *node; > int ret; > > - pm_runtime_get_sync(isi->dev); > + ret = pm_runtime_resume_and_get(isi->dev); > + if (ret < 0) > + return ret; > > /* Enable stream on the sub device */ > ret = v4l2_subdev_call(isi->entity.subdev, video, s_stream, 1); > @@ -782,9 +784,10 @@ static int isi_enum_frameintervals(struct file *file, void *fh, > return 0; > } > > -static void isi_camera_set_bus_param(struct atmel_isi *isi) > +static int isi_camera_set_bus_param(struct atmel_isi *isi) > { > u32 cfg1 = 0; > + int ret; > > /* set bus param for ISI */ > if (isi->pdata.hsync_act_low) > @@ -801,12 +804,16 @@ static void isi_camera_set_bus_param(struct atmel_isi *isi) > cfg1 |= ISI_CFG1_THMASK_BEATS_16; > > /* Enable PM and peripheral clock before operate isi registers */ > - pm_runtime_get_sync(isi->dev); > + ret = pm_runtime_resume_and_get(isi->dev); > + if (ret < 0) > + return ret; > > isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); > isi_writel(isi, ISI_CFG1, cfg1); > > pm_runtime_put(isi->dev); > + > + return 0; > } > > /* -----------------------------------------------------------------------*/ > @@ -1085,7 +1092,11 @@ static int isi_graph_notify_complete(struct v4l2_async_notifier *notifier) > dev_err(isi->dev, "No supported mediabus format found\n"); > return ret; > } > - isi_camera_set_bus_param(isi); > + ret = isi_camera_set_bus_param(isi); > + if (ret) { > + dev_err(isi->dev, "Can't wake up device\n"); > + return ret; > + } > > ret = isi_set_default_fmt(isi); > if (ret) {
diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c index fe3ec8d0eaee..02543fe42e9d 100644 --- a/drivers/media/platform/atmel/atmel-isc-base.c +++ b/drivers/media/platform/atmel/atmel-isc-base.c @@ -294,9 +294,13 @@ static int isc_wait_clk_stable(struct clk_hw *hw) static int isc_clk_prepare(struct clk_hw *hw) { struct isc_clk *isc_clk = to_isc_clk(hw); + int ret; - if (isc_clk->id == ISC_ISPCK) - pm_runtime_get_sync(isc_clk->dev); + if (isc_clk->id == ISC_ISPCK) { + ret = pm_runtime_resume_and_get(isc_clk->dev); + if (ret < 0) + return 0; + } return isc_wait_clk_stable(hw); } @@ -353,9 +357,13 @@ static int isc_clk_is_enabled(struct clk_hw *hw) { struct isc_clk *isc_clk = to_isc_clk(hw); u32 status; + int ret; - if (isc_clk->id == ISC_ISPCK) - pm_runtime_get_sync(isc_clk->dev); + if (isc_clk->id == ISC_ISPCK) { + ret = pm_runtime_resume_and_get(isc_clk->dev); + if (ret < 0) + return 0; + } regmap_read(isc_clk->regmap, ISC_CLKSR, &status); @@ -807,7 +815,9 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count) goto err_start_stream; } - pm_runtime_get_sync(isc->dev); + ret = pm_runtime_resume_and_get(isc->dev); + if (ret < 0) + goto err_pm_get; ret = isc_configure(isc); if (unlikely(ret)) @@ -838,7 +848,7 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count) err_configure: pm_runtime_put_sync(isc->dev); - +err_pm_get: v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 0); err_start_stream: @@ -1809,6 +1819,7 @@ static void isc_awb_work(struct work_struct *w) u32 baysel; unsigned long flags; u32 min, max; + int ret; /* streaming is not active anymore */ if (isc->stop) @@ -1831,7 +1842,9 @@ static void isc_awb_work(struct work_struct *w) ctrls->hist_id = hist_id; baysel = isc->config.sd_format->cfa_baycfg << ISC_HIS_CFG_BAYSEL_SHIFT; - pm_runtime_get_sync(isc->dev); + ret = pm_runtime_resume_and_get(isc->dev); + if (ret < 0) + return; /* * only update if we have all the required histograms and controls diff --git a/drivers/media/platform/atmel/atmel-isi.c b/drivers/media/platform/atmel/atmel-isi.c index 0514be6153df..6a433926726d 100644 --- a/drivers/media/platform/atmel/atmel-isi.c +++ b/drivers/media/platform/atmel/atmel-isi.c @@ -422,7 +422,9 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count) struct frame_buffer *buf, *node; int ret; - pm_runtime_get_sync(isi->dev); + ret = pm_runtime_resume_and_get(isi->dev); + if (ret < 0) + return ret; /* Enable stream on the sub device */ ret = v4l2_subdev_call(isi->entity.subdev, video, s_stream, 1); @@ -782,9 +784,10 @@ static int isi_enum_frameintervals(struct file *file, void *fh, return 0; } -static void isi_camera_set_bus_param(struct atmel_isi *isi) +static int isi_camera_set_bus_param(struct atmel_isi *isi) { u32 cfg1 = 0; + int ret; /* set bus param for ISI */ if (isi->pdata.hsync_act_low) @@ -801,12 +804,16 @@ static void isi_camera_set_bus_param(struct atmel_isi *isi) cfg1 |= ISI_CFG1_THMASK_BEATS_16; /* Enable PM and peripheral clock before operate isi registers */ - pm_runtime_get_sync(isi->dev); + ret = pm_runtime_resume_and_get(isi->dev); + if (ret < 0) + return ret; isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); isi_writel(isi, ISI_CFG1, cfg1); pm_runtime_put(isi->dev); + + return 0; } /* -----------------------------------------------------------------------*/ @@ -1085,7 +1092,11 @@ static int isi_graph_notify_complete(struct v4l2_async_notifier *notifier) dev_err(isi->dev, "No supported mediabus format found\n"); return ret; } - isi_camera_set_bus_param(isi); + ret = isi_camera_set_bus_param(isi); + if (ret) { + dev_err(isi->dev, "Can't wake up device\n"); + return ret; + } ret = isi_set_default_fmt(isi); if (ret) {
There are several issues in the way the atmel driver handles pm_runtime_get_sync(): - it doesn't check return codes; - it doesn't properly decrement the usage_count on all places; - it starts streaming even if pm_runtime_get_sync() fails. - while it tries to get pm_runtime at the clock enable logic, it doesn't check if the operation was suceeded. Replace all occurrences of it to use the new kAPI: pm_runtime_resume_and_get(), which ensures that, if the return code is not negative, the usage_count was incremented. With that, add additional checks when this is called, in order to ensure that errors will be properly addressed. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- drivers/media/platform/atmel/atmel-isc-base.c | 27 ++++++++++++++----- drivers/media/platform/atmel/atmel-isi.c | 19 ++++++++++--- 2 files changed, 35 insertions(+), 11 deletions(-)