| Message ID | 1619421491-31494-2-git-send-email-u0084500@gmail.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | [RESEND,v6,1/4] mfd: rt4831: Adds support for Richtek RT4831 | expand |
On Mon, Apr 26, 2021 at 03:18:09PM +0800, cy_huang wrote: > From: ChiYuan Huang <cy_huang@richtek.com> > > Adds DT binding document for Richtek RT4831 backlight. > > Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> > Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> > --- > Resend this v6 patch series to loop devicetree reviewers. > > For next, need to add the below line > Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> > --- > .../leds/backlight/richtek,rt4831-backlight.yaml | 65 ++++++++++++++++++++++ > include/dt-bindings/leds/rt4831-backlight.h | 23 ++++++++ > 2 files changed, 88 insertions(+) > create mode 100644 Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml > create mode 100644 include/dt-bindings/leds/rt4831-backlight.h > > diff --git a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml > new file mode 100644 > index 00000000..4da6a66 > --- /dev/null > +++ b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml > @@ -0,0 +1,65 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/leds/backlight/richtek,rt4831-backlight.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Richtek RT4831 Backlight > + > +maintainers: > + - ChiYuan Huang <cy_huang@richtek.com> > + > +description: | > + RT4831 is a mutifunctional device that can provide power to the LCD display > + and LCD backlight. > + > + For the LCD backlight, it can provide four channel WLED driving capability. > + Each channel driving current is up to 30mA > + > + Datasheet is available at > + https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf > + Need to reference common backlight schema: allOf: - $ref: common.yaml# > +properties: > + compatible: > + const: richtek,rt4831-backlight > + > + default-brightness: > + description: | > + The default brightness that applied to the system on start-up. > + $ref: /schemas/types.yaml#/definitions/uint32 Drop description and $ref. Covered in common.yaml. > + minimum: 0 > + maximum: 2048 > + > + max-brightness: > + description: | > + The max brightness for the H/W limit > + $ref: /schemas/types.yaml#/definitions/uint32 And here. > + minimum: 0 > + maximum: 2048 > + > + richtek,pwm-enable: > + description: | > + Specify the backlight dimming following by PWM duty or by SW control. > + type: boolean > + > + richtek,bled-ovp-sel: > + description: | > + Backlight OVP level selection, currently support 17V/21V/25V/29V. > + $ref: /schemas/types.yaml#/definitions/uint8 > + default: 1 > + minimum: 0 > + maximum: 3 > + > + richtek,channel-use: > + description: | > + Backlight LED channel to be used. > + BIT 0/1/2/3 is used to indicate led channel 1/2/3/4 enable or disable. > + $ref: /schemas/types.yaml#/definitions/uint8 > + minimum: 1 > + maximum: 15 > + > +required: > + - compatible > + - richtek,channel-use > + > +additionalProperties: false > diff --git a/include/dt-bindings/leds/rt4831-backlight.h b/include/dt-bindings/leds/rt4831-backlight.h > new file mode 100644 > index 00000000..125c635 > --- /dev/null > +++ b/include/dt-bindings/leds/rt4831-backlight.h > @@ -0,0 +1,23 @@ > +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ > +/* > + * This header provides constants for rt4831 backlight bindings. > + * > + * Copyright (C) 2020, Richtek Technology Corp. > + * Author: ChiYuan Huang <cy_huang@richtek.com> > + */ > + > +#ifndef _DT_BINDINGS_RT4831_BACKLIGHT_H > +#define _DT_BINDINGS_RT4831_BACKLIGHT_H > + > +#define RT4831_BLOVPLVL_17V 0 > +#define RT4831_BLOVPLVL_21V 1 > +#define RT4831_BLOVPLVL_25V 2 > +#define RT4831_BLOVPLVL_29V 3 > + > +#define RT4831_BLED_CH1EN (1 << 0) > +#define RT4831_BLED_CH2EN (1 << 1) > +#define RT4831_BLED_CH3EN (1 << 2) > +#define RT4831_BLED_CH4EN (1 << 3) > +#define RT4831_BLED_ALLCHEN ((1 << 4) - 1) > + > +#endif /* _DT_BINDINGS_RT4831_BACKLIGHT_H */ > -- > 2.7.4 >
Hi, Rob Herring <robh@kernel.org> 於 2021年5月1日 週六 上午4:10寫道： > > On Mon, Apr 26, 2021 at 03:18:09PM +0800, cy_huang wrote: > > From: ChiYuan Huang <cy_huang@richtek.com> > > > > Adds DT binding document for Richtek RT4831 backlight. > > > > Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> > > Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> > > --- > > Resend this v6 patch series to loop devicetree reviewers. > > > > For next, need to add the below line > > Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> > > --- > > .../leds/backlight/richtek,rt4831-backlight.yaml | 65 ++++++++++++++++++++++ > > include/dt-bindings/leds/rt4831-backlight.h | 23 ++++++++ > > 2 files changed, 88 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml > > create mode 100644 include/dt-bindings/leds/rt4831-backlight.h > > > > diff --git a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml > > new file mode 100644 > > index 00000000..4da6a66 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml > > @@ -0,0 +1,65 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/leds/backlight/richtek,rt4831-backlight.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Richtek RT4831 Backlight > > + > > +maintainers: > > + - ChiYuan Huang <cy_huang@richtek.com> > > + > > +description: | > > + RT4831 is a mutifunctional device that can provide power to the LCD display > > + and LCD backlight. > > + > > + For the LCD backlight, it can provide four channel WLED driving capability. > > + Each channel driving current is up to 30mA > > + > > + Datasheet is available at > > + https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf > > + > > Need to reference common backlight schema: > > allOf: > - $ref: common.yaml# > > > +properties: > > + compatible: > > + const: richtek,rt4831-backlight > > + > > + default-brightness: > > + description: | > > + The default brightness that applied to the system on start-up. > > + $ref: /schemas/types.yaml#/definitions/uint32 > > Drop description and $ref. Covered in common.yaml. > OK > > + minimum: 0 > > + maximum: 2048 > > + > > + max-brightness: > > + description: | > > + The max brightness for the H/W limit > > + $ref: /schemas/types.yaml#/definitions/uint32 > > And here. > OK The above changes will be merged in next, thanks. After mfd code patch reviewed, I'll send v7 for all of review comments. > > + minimum: 0 > > + maximum: 2048 > > + > > + richtek,pwm-enable: > > + description: | > > + Specify the backlight dimming following by PWM duty or by SW control. > > + type: boolean > > + > > + richtek,bled-ovp-sel: > > + description: | > > + Backlight OVP level selection, currently support 17V/21V/25V/29V. > > + $ref: /schemas/types.yaml#/definitions/uint8 > > + default: 1 > > + minimum: 0 > > + maximum: 3 > > + > > + richtek,channel-use: > > + description: | > > + Backlight LED channel to be used. > > + BIT 0/1/2/3 is used to indicate led channel 1/2/3/4 enable or disable. > > + $ref: /schemas/types.yaml#/definitions/uint8 > > + minimum: 1 > > + maximum: 15 > > + > > +required: > > + - compatible > > + - richtek,channel-use > > + > > +additionalProperties: false > > diff --git a/include/dt-bindings/leds/rt4831-backlight.h b/include/dt-bindings/leds/rt4831-backlight.h > > new file mode 100644 > > index 00000000..125c635 > > --- /dev/null > > +++ b/include/dt-bindings/leds/rt4831-backlight.h > > @@ -0,0 +1,23 @@ > > +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ > > +/* > > + * This header provides constants for rt4831 backlight bindings. > > + * > > + * Copyright (C) 2020, Richtek Technology Corp. > > + * Author: ChiYuan Huang <cy_huang@richtek.com> > > + */ > > + > > +#ifndef _DT_BINDINGS_RT4831_BACKLIGHT_H > > +#define _DT_BINDINGS_RT4831_BACKLIGHT_H > > + > > +#define RT4831_BLOVPLVL_17V 0 > > +#define RT4831_BLOVPLVL_21V 1 > > +#define RT4831_BLOVPLVL_25V 2 > > +#define RT4831_BLOVPLVL_29V 3 > > + > > +#define RT4831_BLED_CH1EN (1 << 0) > > +#define RT4831_BLED_CH2EN (1 << 1) > > +#define RT4831_BLED_CH3EN (1 << 2) > > +#define RT4831_BLED_CH4EN (1 << 3) > > +#define RT4831_BLED_ALLCHEN ((1 << 4) - 1) > > + > > +#endif /* _DT_BINDINGS_RT4831_BACKLIGHT_H */ > > -- > > 2.7.4 > >
diff --git a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml new file mode 100644 index 00000000..4da6a66 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/richtek,rt4831-backlight.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4831 Backlight + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + RT4831 is a mutifunctional device that can provide power to the LCD display + and LCD backlight. + + For the LCD backlight, it can provide four channel WLED driving capability. + Each channel driving current is up to 30mA + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf + +properties: + compatible: + const: richtek,rt4831-backlight + + default-brightness: + description: | + The default brightness that applied to the system on start-up. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 2048 + + max-brightness: + description: | + The max brightness for the H/W limit + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 2048 + + richtek,pwm-enable: + description: | + Specify the backlight dimming following by PWM duty or by SW control. + type: boolean + + richtek,bled-ovp-sel: + description: | + Backlight OVP level selection, currently support 17V/21V/25V/29V. + $ref: /schemas/types.yaml#/definitions/uint8 + default: 1 + minimum: 0 + maximum: 3 + + richtek,channel-use: + description: | + Backlight LED channel to be used. + BIT 0/1/2/3 is used to indicate led channel 1/2/3/4 enable or disable. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 15 + +required: + - compatible + - richtek,channel-use + +additionalProperties: false diff --git a/include/dt-bindings/leds/rt4831-backlight.h b/include/dt-bindings/leds/rt4831-backlight.h new file mode 100644 index 00000000..125c635 --- /dev/null +++ b/include/dt-bindings/leds/rt4831-backlight.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * This header provides constants for rt4831 backlight bindings. + * + * Copyright (C) 2020, Richtek Technology Corp. + * Author: ChiYuan Huang <cy_huang@richtek.com> + */ + +#ifndef _DT_BINDINGS_RT4831_BACKLIGHT_H +#define _DT_BINDINGS_RT4831_BACKLIGHT_H + +#define RT4831_BLOVPLVL_17V 0 +#define RT4831_BLOVPLVL_21V 1 +#define RT4831_BLOVPLVL_25V 2 +#define RT4831_BLOVPLVL_29V 3 + +#define RT4831_BLED_CH1EN (1 << 0) +#define RT4831_BLED_CH2EN (1 << 1) +#define RT4831_BLED_CH3EN (1 << 2) +#define RT4831_BLED_CH4EN (1 << 3) +#define RT4831_BLED_ALLCHEN ((1 << 4) - 1) + +#endif /* _DT_BINDINGS_RT4831_BACKLIGHT_H */