| Message ID | 20210503180429.88198-1-romain.perier@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: debug: add UART early console support for MSTAR SoCs | expand |
Hi Romain, On Tue, 4 May 2021 at 03:04, Romain Perier <romain.perier@gmail.com> wrote: > > This adds the debug_ll uart for the PM UART found on armv7-based MStar > SoCs. > > Signed-off-by: Romain Perier <romain.perier@gmail.com> > --- > arch/arm/Kconfig.debug | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug > index 36016497b1b3..4f1dd41d639a 100644 > --- a/arch/arm/Kconfig.debug > +++ b/arch/arm/Kconfig.debug > @@ -607,6 +607,14 @@ choice > when u-boot hands over to the kernel, the system > silently crashes, with no serial output at all. > > + config DEBUG_MSTAR_PMUART The only minor thing I can think of here is that maybe this should be MSTARV7 to match the ARCH. I'm not sure the PM UART is in the same place for the pre-ARMv7 stuff and for the MIPS stuff before that. > + bool "Kernel low-level debugging messages via MSTAR PM UART" > + depends on ARCH_MSTARV7 > + select DEBUG_UART_8250 > + help > + Say Y here if you want kernel low-level debugging support > + for MSTAR based platforms on PM UART. > + > config DEBUG_MT6589_UART0 > bool "Mediatek mt6589 UART0" > depends on ARCH_MEDIATEK > @@ -1605,6 +1613,7 @@ config DEBUG_UART_PHYS > default 0x18000400 if DEBUG_BCM_HR2 > default 0x18023000 if DEBUG_BCM_IPROC_UART3 > default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 > + default 0x1f221000 if DEBUG_MSTAR_PMUART > default 0x20001000 if DEBUG_HIP01_UART > default 0x20060000 if DEBUG_RK29_UART0 > default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 > @@ -1722,6 +1731,7 @@ config DEBUG_UART_VIRT > default 0xf0100000 if DEBUG_DIGICOLOR_UA0 > default 0xf01fb000 if DEBUG_NOMADIK_UART > default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836 > + default 0xf0221000 if DEBUG_MSTAR_PMUART > default 0xf1000300 if DEBUG_BCM_5301X > default 0xf1000400 if DEBUG_BCM_HR2 > default 0xf1002000 if DEBUG_MT8127_UART0 > @@ -1827,6 +1837,7 @@ config DEBUG_UART_8250_SHIFT > default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \ > DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \ > DEBUG_OMAP7XXUART3 > + default 3 if DEBUG_MSTAR_PMUART > default 2 > > config DEBUG_UART_8250_WORD > -- > 2.30.2 > Aside from the MSTARV7 thing this looks good and I quickly tested on an SSD202D board. With the MSTARV7 thing fixed if deemed necessary: Acked-by: Daniel Palmer <daniel@thingy.jp>
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 36016497b1b3..4f1dd41d639a 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -607,6 +607,14 @@ choice when u-boot hands over to the kernel, the system silently crashes, with no serial output at all. + config DEBUG_MSTAR_PMUART + bool "Kernel low-level debugging messages via MSTAR PM UART" + depends on ARCH_MSTARV7 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + for MSTAR based platforms on PM UART. + config DEBUG_MT6589_UART0 bool "Mediatek mt6589 UART0" depends on ARCH_MEDIATEK @@ -1605,6 +1613,7 @@ config DEBUG_UART_PHYS default 0x18000400 if DEBUG_BCM_HR2 default 0x18023000 if DEBUG_BCM_IPROC_UART3 default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 + default 0x1f221000 if DEBUG_MSTAR_PMUART default 0x20001000 if DEBUG_HIP01_UART default 0x20060000 if DEBUG_RK29_UART0 default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 @@ -1722,6 +1731,7 @@ config DEBUG_UART_VIRT default 0xf0100000 if DEBUG_DIGICOLOR_UA0 default 0xf01fb000 if DEBUG_NOMADIK_UART default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836 + default 0xf0221000 if DEBUG_MSTAR_PMUART default 0xf1000300 if DEBUG_BCM_5301X default 0xf1000400 if DEBUG_BCM_HR2 default 0xf1002000 if DEBUG_MT8127_UART0 @@ -1827,6 +1837,7 @@ config DEBUG_UART_8250_SHIFT default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \ DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \ DEBUG_OMAP7XXUART3 + default 3 if DEBUG_MSTAR_PMUART default 2 config DEBUG_UART_8250_WORD
This adds the debug_ll uart for the PM UART found on armv7-based MStar SoCs. Signed-off-by: Romain Perier <romain.perier@gmail.com> --- arch/arm/Kconfig.debug | 11 +++++++++++ 1 file changed, 11 insertions(+)