diff mbox series

[v5,2/6] dt-bindings: iio: accel: fxls8962af: add bindings

Message ID 20210506070940.312959-2-sean@geanix.com (mailing list archive)
State New, archived
Headers show
Series [v5,1/6] iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers | expand

Commit Message

Sean Nyekjaer May 6, 2021, 7:09 a.m. UTC 
Add devicetree binding for the NXP FXLS8962AF/FXLS8964AF
accelerometer sensor.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
---
Changes for v2:
 - removed requirement for interrupt

Changes for v3:
 - None

Changes for v4:
 - Included the dt patch from the RFC

Changes for v5:
 - fixed interrupt enum

 .../bindings/iio/accel/nxp,fxls8962af.yaml    | 80 +++++++++++++++++++
 1 file changed, 80 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml

Comments

Rob Herring (Arm) May 7, 2021, 12:52 a.m. UTC | #1 
On Thu, 06 May 2021 09:09:36 +0200, Sean Nyekjaer wrote:
> Add devicetree binding for the NXP FXLS8962AF/FXLS8964AF
> accelerometer sensor.
> 
> Signed-off-by: Sean Nyekjaer <sean@geanix.com>
> ---
> Changes for v2:
>  - removed requirement for interrupt
> 
> Changes for v3:
>  - None
> 
> Changes for v4:
>  - Included the dt patch from the RFC
> 
> Changes for v5:
>  - fixed interrupt enum
> 
>  .../bindings/iio/accel/nxp,fxls8962af.yaml    | 80 +++++++++++++++++++
>  1 file changed, 80 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
new file mode 100644
index 000000000000..ad529ab2c6e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
@@ -0,0 +1,80 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/nxp,fxls8962af.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP FXLS8962AF/FXLS8964AF Accelerometer driver
+
+maintainers:
+  - Sean Nyekjaer <sean@geanix.com>
+
+description: |
+  NXP FXLS8962AF/FXLS8964AF Accelerometer driver that supports
+  SPI and I2C interface.
+    https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf
+    https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf
+
+properties:
+  compatible:
+    enum:
+      - nxp,fxls8962af
+      - nxp,fxls8964af
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: phandle to the regulator that provides power to the accelerometer
+
+  spi-max-frequency: true
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    enum:
+      - INT1
+      - INT2
+
+  drive-open-drain:
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a I2C device node */
+        accelerometer@62 {
+            compatible = "nxp,fxls8962af";
+            reg = <0x62>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "INT1";
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a SPI device node */
+        accelerometer@0 {
+            compatible = "nxp,fxls8962af";
+            reg = <0>;
+            spi-max-frequency = <4000000>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "INT1";
+        };
+    };