| Message ID | 20210510070532.3838598-1-vkoul@kernel.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: qcom: sm8350: fix the node unit addresses | expand |
Hey Vinod, Thanks for catching this. On Mon, 10 May 2021 at 09:05, Vinod Koul <vkoul@kernel.org> wrote: > > Some node unit addresses were put wrongly in the dts, resulting in > below warning when run with W=1 > > arch/arm64/boot/dts/qcom/sm8350.dtsi:693.34-702.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c222000: simple-bus unit address format error, expected "c263000" > arch/arm64/boot/dts/qcom/sm8350.dtsi:704.34-713.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c223000: simple-bus unit address format error, expected "c265000" > arch/arm64/boot/dts/qcom/sm8350.dtsi:1180.32-1185.5: Warning (simple_bus_reg): /soc@0/interconnect@90e0000: simple-bus unit address format error, expected "90c0000" > > Fix by correcting to the correct address as given in reg node > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > --- > arch/arm64/boot/dts/qcom/sm8350.dtsi | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi > index a8cd224a2f31..d015a9ca95a5 100644 > --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi > @@ -6,6 +6,7 @@ > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/clock/qcom,gcc-sm8350.h> > #include <dt-bindings/clock/qcom,rpmh.h> > +#include <dt-bindings/interconnect/qcom,sm8350.h> > #include <dt-bindings/mailbox/qcom-ipcc.h> > #include <dt-bindings/power/qcom-aoss-qmp.h> > #include <dt-bindings/power/qcom-rpmpd.h> > @@ -689,7 +690,7 @@ pdc: interrupt-controller@b220000 { > interrupt-controller; > }; > > - tsens0: thermal-sensor@c222000 { > + tsens0: thermal-sensor@c263000 { > compatible = "qcom,sm8350-tsens", "qcom,tsens-v2"; > reg = <0 0x0c263000 0 0x1ff>, /* TM */ > <0 0x0c222000 0 0x8>; /* SROT */ > @@ -700,7 +701,7 @@ tsens0: thermal-sensor@c222000 { > #thermal-sensor-cells = <1>; > }; > > - tsens1: thermal-sensor@c223000 { > + tsens1: thermal-sensor@c265000 { > compatible = "qcom,sm8350-tsens", "qcom,tsens-v2"; > reg = <0 0x0c265000 0 0x1ff>, /* TM */ > <0 0x0c223000 0 0x8>; /* SROT */ > @@ -1176,7 +1177,7 @@ usb_2_ssphy: phy@88ebe00 { > }; > }; > > - dc_noc: interconnect@90e0000 { > + dc_noc: interconnect@90c0000 { > compatible = "qcom,sm8350-dc-noc"; > reg = <0 0x090c0000 0 0x4200>; > #interconnect-cells = <1>; Reviewed-by: Robert Foss <robert.foss@linaro.org>
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index a8cd224a2f31..d015a9ca95a5 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-sm8350.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interconnect/qcom,sm8350.h> #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -689,7 +690,7 @@ pdc: interrupt-controller@b220000 { interrupt-controller; }; - tsens0: thermal-sensor@c222000 { + tsens0: thermal-sensor@c263000 { compatible = "qcom,sm8350-tsens", "qcom,tsens-v2"; reg = <0 0x0c263000 0 0x1ff>, /* TM */ <0 0x0c222000 0 0x8>; /* SROT */ @@ -700,7 +701,7 @@ tsens0: thermal-sensor@c222000 { #thermal-sensor-cells = <1>; }; - tsens1: thermal-sensor@c223000 { + tsens1: thermal-sensor@c265000 { compatible = "qcom,sm8350-tsens", "qcom,tsens-v2"; reg = <0 0x0c265000 0 0x1ff>, /* TM */ <0 0x0c223000 0 0x8>; /* SROT */ @@ -1176,7 +1177,7 @@ usb_2_ssphy: phy@88ebe00 { }; }; - dc_noc: interconnect@90e0000 { + dc_noc: interconnect@90c0000 { compatible = "qcom,sm8350-dc-noc"; reg = <0 0x090c0000 0 0x4200>; #interconnect-cells = <1>;
Some node unit addresses were put wrongly in the dts, resulting in below warning when run with W=1 arch/arm64/boot/dts/qcom/sm8350.dtsi:693.34-702.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c222000: simple-bus unit address format error, expected "c263000" arch/arm64/boot/dts/qcom/sm8350.dtsi:704.34-713.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c223000: simple-bus unit address format error, expected "c265000" arch/arm64/boot/dts/qcom/sm8350.dtsi:1180.32-1185.5: Warning (simple_bus_reg): /soc@0/interconnect@90e0000: simple-bus unit address format error, expected "90c0000" Fix by correcting to the correct address as given in reg node Signed-off-by: Vinod Koul <vkoul@kernel.org> --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)