| Message ID | 20210506115626.12480-1-Perry_Yuan@Dell.com (mailing list archive) |
|---|---|
| State | Rejected, archived |
| Headers | show |
| Series | hardware-privacy-implementation-for-dell-laptop | expand |
Hi Perry, On 5/6/21 1:56 PM, Perry Yuan wrote: > From: Perry Yuan <perry_yuan@dell.com> > > Some new Dell system is going to support audio internal micphone > privacy setting from hardware level with micmute led state changing > When micmute hotkey pressed by user, soft mute will need to be enabled > firstly in case of pop noise, and codec driver need to react to mic > mute event to EC(embedded controller) notifying that SW mute is completed > Then EC will do the hardware mute physically within the timeout reached > > This patch allow codec rt715 and rt715 sdca driver to change the local micmute > led state. Dell privacy led trigger driver will ack EC when micmute key pressed > through this micphone led control interface like hda_generic provided > ACPI method defined in dell-privacy micmute led trigger will be called > for notifying the EC that software mute has been completed, then hardware > audio circuit solution controlled by EC will switch the audio input source off/on > > Signed-off-by: Perry Yuan <perry_yuan@dell.com> NACK, as explained before we want the binding of the control to the LED-trigger to be done from the UCM profile. Support for this has landed kernel-side in Linux tree now (this will be part of 5.13-rc1). Together with the latest git alsa-lib and alsa-utils code, you can now do what this patch does from an UCM profile file and AFAIK that is the preferred way to do this. See here for an example UCM profile patch implementing this: https://lore.kernel.org/alsa-devel/20210507131139.10231-3-hdegoede@redhat.com/T/#u Note that if you test this under Fedora you will hit a selinux denial, to workaround that you can put selinux in permissive mode. This selinux issue is being tracked here: https://bugzilla.redhat.com/show_bug.cgi?id=1958210 Regards, Hans > > -------- > v7 -> v8: > * N/A > v6 -> v7: > * addresed review comments from Jaroslav > * use device id in the quirk list > v5 -> v6: > * add quirks for micmute led control as short term solution to control > micmute led state change > * add comments for the invert checking > v4 -> v5: > * rebase to latest 5.12 rc4 upstream kernel > v3 -> v4: > * remove unused debug log > * remove compile flag of DELL privacy > * move the micmute_led to local from rt715_priv > * when Jaroslav upstream his gerneric LED trigger driver,I will rebase > this patch,please consider merge this at first > https://lore.kernel.org/alsa-devel/20210211111400.1131020-1-perex@perex.cz/ > v2 -> v3: > * simplify the patch to reuse some val value > * add more detail to the commit info > v1 -> v2: > * fix some format issue > -------- > --- > sound/soc/codecs/rt715-sdca.c | 42 +++++++++++++++++++++++++++++++++++ > sound/soc/codecs/rt715.c | 42 +++++++++++++++++++++++++++++++++++ > 2 files changed, 84 insertions(+) > > diff --git a/sound/soc/codecs/rt715-sdca.c b/sound/soc/codecs/rt715-sdca.c > index 936e3061ca1e..de46514e0207 100644 > --- a/sound/soc/codecs/rt715-sdca.c > +++ b/sound/soc/codecs/rt715-sdca.c > @@ -11,12 +11,14 @@ > #include <linux/moduleparam.h> > #include <linux/kernel.h> > #include <linux/init.h> > +#include <linux/leds.h> > #include <linux/pm_runtime.h> > #include <linux/pm.h> > #include <linux/soundwire/sdw.h> > #include <linux/regmap.h> > #include <linux/slab.h> > #include <linux/platform_device.h> > +#include <linux/dmi.h> > #include <sound/core.h> > #include <sound/pcm.h> > #include <sound/pcm_params.h> > @@ -344,6 +346,32 @@ static int rt715_sdca_get_volsw(struct snd_kcontrol *kcontrol, > return 0; > } > > +static bool micmute_led_set; > +static int dmi_matched(const struct dmi_system_id *dmi) > +{ > + micmute_led_set = 1; > + return 1; > +} > + > +/* Some systems will need to use this to trigger mic mute LED state changed */ > +static const struct dmi_system_id micmute_led_dmi_table[] = { > + { > + .callback = dmi_matched, > + .matches = { > + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), > + DMI_MATCH(DMI_PRODUCT_SKU, "0A32"), > + }, > + }, > + { > + .callback = dmi_matched, > + .matches = { > + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), > + DMI_MATCH(DMI_PRODUCT_SKU, "0A3E"), > + }, > + }, > + {}, > +}; > + > static int rt715_sdca_put_volsw(struct snd_kcontrol *kcontrol, > struct snd_ctl_elem_value *ucontrol) > { > @@ -358,6 +386,7 @@ static int rt715_sdca_put_volsw(struct snd_kcontrol *kcontrol, > unsigned int mask = (1 << fls(max)) - 1; > unsigned int invert = p->invert; > int err; > + bool micmute_led; > > for (i = 0; i < 4; i++) { > if (ucontrol->value.integer.value[i] != rt715->kctl_switch_orig[i]) { > @@ -394,6 +423,18 @@ static int rt715_sdca_put_volsw(struct snd_kcontrol *kcontrol, > return err; > } > > + /* Micmute LED state changed by muted/unmute switch > + * to keep syncing with actual hardware mic mute led state > + * invert will be checked to change the state switch > + */ > + if (invert && micmute_led_set) { > + if (ucontrol->value.integer.value[0] || ucontrol->value.integer.value[1]) > + micmute_led = LED_OFF; > + else > + micmute_led = LED_ON; > + ledtrig_audio_set(LED_AUDIO_MICMUTE, micmute_led); > + } > + > return k_changed; > } > > @@ -1069,6 +1110,7 @@ int rt715_sdca_io_init(struct device *dev, struct sdw_slave *slave) > > pm_runtime_mark_last_busy(&slave->dev); > pm_runtime_put_autosuspend(&slave->dev); > + dmi_check_system(micmute_led_dmi_table); > > return 0; > } > diff --git a/sound/soc/codecs/rt715.c b/sound/soc/codecs/rt715.c > index 1352869cc086..4dbd870009b8 100644 > --- a/sound/soc/codecs/rt715.c > +++ b/sound/soc/codecs/rt715.c > @@ -13,6 +13,7 @@ > #include <linux/init.h> > #include <linux/delay.h> > #include <linux/i2c.h> > +#include <linux/leds.h> > #include <linux/pm_runtime.h> > #include <linux/pm.h> > #include <linux/soundwire/sdw.h> > @@ -25,6 +26,7 @@ > #include <linux/of.h> > #include <linux/of_gpio.h> > #include <linux/of_device.h> > +#include <linux/dmi.h> > #include <sound/core.h> > #include <sound/pcm.h> > #include <sound/pcm_params.h> > @@ -70,6 +72,32 @@ static void rt715_get_gain(struct rt715_priv *rt715, unsigned int addr_h, > pr_err("Failed to get L channel gain.\n"); > } > > +static bool micmute_led_set; > +static int dmi_matched(const struct dmi_system_id *dmi) > +{ > + micmute_led_set = 1; > + return 1; > +} > + > +/* Some systems will need to use this to trigger mic mute LED state changed */ > +static const struct dmi_system_id micmute_led_dmi_table[] = { > + { > + .callback = dmi_matched, > + .matches = { > + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), > + DMI_MATCH(DMI_PRODUCT_SKU, "0A32"), > + }, > + }, > + { > + .callback = dmi_matched, > + .matches = { > + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), > + DMI_MATCH(DMI_PRODUCT_SKU, "0A3E"), > + }, > + }, > + {}, > +}; > + > /* For Verb-Set Amplifier Gain (Verb ID = 3h) */ > static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol, > struct snd_ctl_elem_value *ucontrol) > @@ -83,6 +111,7 @@ static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol, > unsigned int addr_h, addr_l, val_h, val_ll, val_lr; > unsigned int read_ll, read_rl, i; > unsigned int k_vol_changed = 0; > + bool micmute_led; > > for (i = 0; i < 2; i++) { > if (ucontrol->value.integer.value[i] != rt715->kctl_2ch_vol_ori[i]) { > @@ -155,6 +184,18 @@ static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol, > break; > } > > + /* Micmute LED state changed by muted/unmute switch > + * to keep syncing with actual hardware mic mute led state > + * invert will be checked to change the state switch > + */ > + if (micmute_led_set) { > + if (ucontrol->value.integer.value[0] || ucontrol->value.integer.value[1]) > + micmute_led = LED_OFF; > + else > + micmute_led = LED_ON; > + ledtrig_audio_set(LED_AUDIO_MICMUTE, micmute_led); > + } > + > /* D0:power on state, D3: power saving mode */ > if (dapm->bias_level <= SND_SOC_BIAS_STANDBY) > regmap_write(rt715->regmap, > @@ -1088,6 +1129,7 @@ int rt715_io_init(struct device *dev, struct sdw_slave *slave) > > pm_runtime_mark_last_busy(&slave->dev); > pm_runtime_put_autosuspend(&slave->dev); > + dmi_check_system(micmute_led_dmi_table); > > return 0; > } >
Hi Hans > -----Original Message----- > From: Hans de Goede <hdegoede@redhat.com> > Sent: 2021年5月7日 21:18 > To: Yuan, Perry; pobrn@protonmail.com; pierre- > louis.bossart@linux.intel.com; oder_chiou@realtek.com; perex@perex.cz; > tiwai@suse.com; mgross@linux.intel.com > Cc: lgirdwood@gmail.com; broonie@kernel.org; alsa-devel@alsa-project.org; > linux-kernel@vger.kernel.org; platform-driver-x86@vger.kernel.org; > mario.limonciello@outlook.com; Dell Client Kernel > Subject: Re: [PATCH v8 2/2] ASoC: rt715:add micmute led state control > supports > > > [EXTERNAL EMAIL] > > Hi Perry, > > On 5/6/21 1:56 PM, Perry Yuan wrote: > > From: Perry Yuan <perry_yuan@dell.com> > > > > Some new Dell system is going to support audio internal micphone > > privacy setting from hardware level with micmute led state changing > > When micmute hotkey pressed by user, soft mute will need to be enabled > > firstly in case of pop noise, and codec driver need to react to mic > > mute event to EC(embedded controller) notifying that SW mute is > > completed Then EC will do the hardware mute physically within the > > timeout reached > > > > This patch allow codec rt715 and rt715 sdca driver to change the local > > micmute led state. Dell privacy led trigger driver will ack EC when > > micmute key pressed through this micphone led control interface like > > hda_generic provided ACPI method defined in dell-privacy micmute led > > trigger will be called for notifying the EC that software mute has > > been completed, then hardware audio circuit solution controlled by EC > > will switch the audio input source off/on > > > > Signed-off-by: Perry Yuan <perry_yuan@dell.com> > > NACK, as explained before we want the binding of the control to the LED- > trigger to be done from the UCM profile. > > Support for this has landed kernel-side in Linux tree now (this will be part of > 5.13-rc1). Together with the latest git alsa-lib and alsa-utils code, you can now > do what this patch does from an UCM profile file and AFAIK that is the > preferred way to do this. > > See here for an example UCM profile patch implementing this: > > https://urldefense.com/v3/__https://lore.kernel.org/alsa- > devel/20210507131139.10231-3- > hdegoede@redhat.com/T/*u__;Iw!!LpKI!zM9rVPYaTjLEYUmBrIayi3aj_QvB5p1 > u2luEckfQCUeVbnRPk7DL8hwdhIDLjEc$ [lore[.]kernel[.]org] > > Note that if you test this under Fedora you will hit a selinux denial, to > workaround that you can put selinux in permissive mode. This selinux issue is > being tracked here: > > https://urldefense.com/v3/__https://bugzilla.redhat.com/show_bug.cgi?id=1 > 958210__;!!LpKI!zM9rVPYaTjLEYUmBrIayi3aj_QvB5p1u2luEckfQCUeVbnRPk7 > DL8hwd_fmxo0I$ [bugzilla[.]redhat[.]com] > > Regards, > > Hans Thanks for the feedback a lot. I am trying to make one new patch for the ucm2 profile Could you help to check if there is some other changes I need to make for the privacy driver ? Perry > > > > > > > > > > -------- > > v7 -> v8: > > * N/A > > v6 -> v7: > > * addresed review comments from Jaroslav > > * use device id in the quirk list > > v5 -> v6: > > * add quirks for micmute led control as short term solution to control > > micmute led state change > > * add comments for the invert checking > > v4 -> v5: > > * rebase to latest 5.12 rc4 upstream kernel > > v3 -> v4: > > * remove unused debug log > > * remove compile flag of DELL privacy > > * move the micmute_led to local from rt715_priv > > * when Jaroslav upstream his gerneric LED trigger driver,I will rebase > > this patch,please consider merge this at first > > > > https://urldefense.com/v3/__https://lore.kernel.org/alsa-devel/2021021 > > 1111400.1131020-1- > perex@perex.cz/__;!!LpKI!zM9rVPYaTjLEYUmBrIayi3aj_Qv > > B5p1u2luEckfQCUeVbnRPk7DL8hwdy240518$ [lore[.]kernel[.]org] > > v2 -> v3: > > * simplify the patch to reuse some val value > > * add more detail to the commit info > > v1 -> v2: > > * fix some format issue > > -------- > > --- > > sound/soc/codecs/rt715-sdca.c | 42 > +++++++++++++++++++++++++++++++++++ > > sound/soc/codecs/rt715.c | 42 > +++++++++++++++++++++++++++++++++++ > > 2 files changed, 84 insertions(+) > > > > diff --git a/sound/soc/codecs/rt715-sdca.c > > b/sound/soc/codecs/rt715-sdca.c index 936e3061ca1e..de46514e0207 > > 100644 > > --- a/sound/soc/codecs/rt715-sdca.c > > +++ b/sound/soc/codecs/rt715-sdca.c > > @@ -11,12 +11,14 @@ > > #include <linux/moduleparam.h> > > #include <linux/kernel.h> > > #include <linux/init.h> > > +#include <linux/leds.h> > > #include <linux/pm_runtime.h> > > #include <linux/pm.h> > > #include <linux/soundwire/sdw.h> > > #include <linux/regmap.h> > > #include <linux/slab.h> > > #include <linux/platform_device.h> > > +#include <linux/dmi.h> > > #include <sound/core.h> > > #include <sound/pcm.h> > > #include <sound/pcm_params.h> > > @@ -344,6 +346,32 @@ static int rt715_sdca_get_volsw(struct > snd_kcontrol *kcontrol, > > return 0; > > } > > > > +static bool micmute_led_set; > > +static int dmi_matched(const struct dmi_system_id *dmi) { > > + micmute_led_set = 1; > > + return 1; > > +} > > + > > +/* Some systems will need to use this to trigger mic mute LED state > > +changed */ static const struct dmi_system_id micmute_led_dmi_table[] = { > > + { > > + .callback = dmi_matched, > > + .matches = { > > + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), > > + DMI_MATCH(DMI_PRODUCT_SKU, "0A32"), > > + }, > > + }, > > + { > > + .callback = dmi_matched, > > + .matches = { > > + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), > > + DMI_MATCH(DMI_PRODUCT_SKU, "0A3E"), > > + }, > > + }, > > + {}, > > +}; > > + > > static int rt715_sdca_put_volsw(struct snd_kcontrol *kcontrol, > > struct snd_ctl_elem_value *ucontrol) { @@ -358,6 +386,7 @@ static > > int rt715_sdca_put_volsw(struct snd_kcontrol *kcontrol, > > unsigned int mask = (1 << fls(max)) - 1; > > unsigned int invert = p->invert; > > int err; > > + bool micmute_led; > > > > for (i = 0; i < 4; i++) { > > if (ucontrol->value.integer.value[i] != rt715- > >kctl_switch_orig[i]) > > { @@ -394,6 +423,18 @@ static int rt715_sdca_put_volsw(struct > snd_kcontrol *kcontrol, > > return err; > > } > > > > + /* Micmute LED state changed by muted/unmute switch > > + * to keep syncing with actual hardware mic mute led state > > + * invert will be checked to change the state switch > > + */ > > + if (invert && micmute_led_set) { > > + if (ucontrol->value.integer.value[0] || ucontrol- > >value.integer.value[1]) > > + micmute_led = LED_OFF; > > + else > > + micmute_led = LED_ON; > > + ledtrig_audio_set(LED_AUDIO_MICMUTE, micmute_led); > > + } > > + > > return k_changed; > > } > > > > @@ -1069,6 +1110,7 @@ int rt715_sdca_io_init(struct device *dev, > > struct sdw_slave *slave) > > > > pm_runtime_mark_last_busy(&slave->dev); > > pm_runtime_put_autosuspend(&slave->dev); > > + dmi_check_system(micmute_led_dmi_table); > > > > return 0; > > } > > diff --git a/sound/soc/codecs/rt715.c b/sound/soc/codecs/rt715.c index > > 1352869cc086..4dbd870009b8 100644 > > --- a/sound/soc/codecs/rt715.c > > +++ b/sound/soc/codecs/rt715.c > > @@ -13,6 +13,7 @@ > > #include <linux/init.h> > > #include <linux/delay.h> > > #include <linux/i2c.h> > > +#include <linux/leds.h> > > #include <linux/pm_runtime.h> > > #include <linux/pm.h> > > #include <linux/soundwire/sdw.h> > > @@ -25,6 +26,7 @@ > > #include <linux/of.h> > > #include <linux/of_gpio.h> > > #include <linux/of_device.h> > > +#include <linux/dmi.h> > > #include <sound/core.h> > > #include <sound/pcm.h> > > #include <sound/pcm_params.h> > > @@ -70,6 +72,32 @@ static void rt715_get_gain(struct rt715_priv *rt715, > unsigned int addr_h, > > pr_err("Failed to get L channel gain.\n"); } > > > > +static bool micmute_led_set; > > +static int dmi_matched(const struct dmi_system_id *dmi) { > > + micmute_led_set = 1; > > + return 1; > > +} > > + > > +/* Some systems will need to use this to trigger mic mute LED state > > +changed */ static const struct dmi_system_id micmute_led_dmi_table[] = { > > + { > > + .callback = dmi_matched, > > + .matches = { > > + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), > > + DMI_MATCH(DMI_PRODUCT_SKU, "0A32"), > > + }, > > + }, > > + { > > + .callback = dmi_matched, > > + .matches = { > > + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), > > + DMI_MATCH(DMI_PRODUCT_SKU, "0A3E"), > > + }, > > + }, > > + {}, > > +}; > > + > > /* For Verb-Set Amplifier Gain (Verb ID = 3h) */ static int > > rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol, > > struct snd_ctl_elem_value *ucontrol) > @@ -83,6 +111,7 @@ static > > int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol, > > unsigned int addr_h, addr_l, val_h, val_ll, val_lr; > > unsigned int read_ll, read_rl, i; > > unsigned int k_vol_changed = 0; > > + bool micmute_led; > > > > for (i = 0; i < 2; i++) { > > if (ucontrol->value.integer.value[i] != rt715- > >kctl_2ch_vol_ori[i]) > > { @@ -155,6 +184,18 @@ static int rt715_set_amp_gain_put(struct > snd_kcontrol *kcontrol, > > break; > > } > > > > + /* Micmute LED state changed by muted/unmute switch > > + * to keep syncing with actual hardware mic mute led state > > + * invert will be checked to change the state switch > > + */ > > + if (micmute_led_set) { > > + if (ucontrol->value.integer.value[0] || ucontrol- > >value.integer.value[1]) > > + micmute_led = LED_OFF; > > + else > > + micmute_led = LED_ON; > > + ledtrig_audio_set(LED_AUDIO_MICMUTE, micmute_led); > > + } > > + > > /* D0:power on state, D3: power saving mode */ > > if (dapm->bias_level <= SND_SOC_BIAS_STANDBY) > > regmap_write(rt715->regmap, > > @@ -1088,6 +1129,7 @@ int rt715_io_init(struct device *dev, struct > > sdw_slave *slave) > > > > pm_runtime_mark_last_busy(&slave->dev); > > pm_runtime_put_autosuspend(&slave->dev); > > + dmi_check_system(micmute_led_dmi_table); > > > > return 0; > > } > >
diff --git a/sound/soc/codecs/rt715-sdca.c b/sound/soc/codecs/rt715-sdca.c index 936e3061ca1e..de46514e0207 100644 --- a/sound/soc/codecs/rt715-sdca.c +++ b/sound/soc/codecs/rt715-sdca.c @@ -11,12 +11,14 @@ #include <linux/moduleparam.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/leds.h> #include <linux/pm_runtime.h> #include <linux/pm.h> #include <linux/soundwire/sdw.h> #include <linux/regmap.h> #include <linux/slab.h> #include <linux/platform_device.h> +#include <linux/dmi.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> @@ -344,6 +346,32 @@ static int rt715_sdca_get_volsw(struct snd_kcontrol *kcontrol, return 0; } +static bool micmute_led_set; +static int dmi_matched(const struct dmi_system_id *dmi) +{ + micmute_led_set = 1; + return 1; +} + +/* Some systems will need to use this to trigger mic mute LED state changed */ +static const struct dmi_system_id micmute_led_dmi_table[] = { + { + .callback = dmi_matched, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_SKU, "0A32"), + }, + }, + { + .callback = dmi_matched, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_SKU, "0A3E"), + }, + }, + {}, +}; + static int rt715_sdca_put_volsw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -358,6 +386,7 @@ static int rt715_sdca_put_volsw(struct snd_kcontrol *kcontrol, unsigned int mask = (1 << fls(max)) - 1; unsigned int invert = p->invert; int err; + bool micmute_led; for (i = 0; i < 4; i++) { if (ucontrol->value.integer.value[i] != rt715->kctl_switch_orig[i]) { @@ -394,6 +423,18 @@ static int rt715_sdca_put_volsw(struct snd_kcontrol *kcontrol, return err; } + /* Micmute LED state changed by muted/unmute switch + * to keep syncing with actual hardware mic mute led state + * invert will be checked to change the state switch + */ + if (invert && micmute_led_set) { + if (ucontrol->value.integer.value[0] || ucontrol->value.integer.value[1]) + micmute_led = LED_OFF; + else + micmute_led = LED_ON; + ledtrig_audio_set(LED_AUDIO_MICMUTE, micmute_led); + } + return k_changed; } @@ -1069,6 +1110,7 @@ int rt715_sdca_io_init(struct device *dev, struct sdw_slave *slave) pm_runtime_mark_last_busy(&slave->dev); pm_runtime_put_autosuspend(&slave->dev); + dmi_check_system(micmute_led_dmi_table); return 0; } diff --git a/sound/soc/codecs/rt715.c b/sound/soc/codecs/rt715.c index 1352869cc086..4dbd870009b8 100644 --- a/sound/soc/codecs/rt715.c +++ b/sound/soc/codecs/rt715.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/i2c.h> +#include <linux/leds.h> #include <linux/pm_runtime.h> #include <linux/pm.h> #include <linux/soundwire/sdw.h> @@ -25,6 +26,7 @@ #include <linux/of.h> #include <linux/of_gpio.h> #include <linux/of_device.h> +#include <linux/dmi.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> @@ -70,6 +72,32 @@ static void rt715_get_gain(struct rt715_priv *rt715, unsigned int addr_h, pr_err("Failed to get L channel gain.\n"); } +static bool micmute_led_set; +static int dmi_matched(const struct dmi_system_id *dmi) +{ + micmute_led_set = 1; + return 1; +} + +/* Some systems will need to use this to trigger mic mute LED state changed */ +static const struct dmi_system_id micmute_led_dmi_table[] = { + { + .callback = dmi_matched, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_SKU, "0A32"), + }, + }, + { + .callback = dmi_matched, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_SKU, "0A3E"), + }, + }, + {}, +}; + /* For Verb-Set Amplifier Gain (Verb ID = 3h) */ static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) @@ -83,6 +111,7 @@ static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol, unsigned int addr_h, addr_l, val_h, val_ll, val_lr; unsigned int read_ll, read_rl, i; unsigned int k_vol_changed = 0; + bool micmute_led; for (i = 0; i < 2; i++) { if (ucontrol->value.integer.value[i] != rt715->kctl_2ch_vol_ori[i]) { @@ -155,6 +184,18 @@ static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol, break; } + /* Micmute LED state changed by muted/unmute switch + * to keep syncing with actual hardware mic mute led state + * invert will be checked to change the state switch + */ + if (micmute_led_set) { + if (ucontrol->value.integer.value[0] || ucontrol->value.integer.value[1]) + micmute_led = LED_OFF; + else + micmute_led = LED_ON; + ledtrig_audio_set(LED_AUDIO_MICMUTE, micmute_led); + } + /* D0:power on state, D3: power saving mode */ if (dapm->bias_level <= SND_SOC_BIAS_STANDBY) regmap_write(rt715->regmap, @@ -1088,6 +1129,7 @@ int rt715_io_init(struct device *dev, struct sdw_slave *slave) pm_runtime_mark_last_busy(&slave->dev); pm_runtime_put_autosuspend(&slave->dev); + dmi_check_system(micmute_led_dmi_table); return 0; }