Message ID | 20210429041641.11077-4-rex-bc.chen@mediatek.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | mt8183 dpi supports dual edge | expand |
Hi, Rex: Rex-BC Chen <rex-bc.chen@mediatek.com> 於 2021年4月29日 週四 下午12:16寫道: > > Add the atomic_get_output_bus_fmts, atomic_get_input_bus_fmts to negotiate > the possible output and input formats for the current mode and monitor, > and use the negotiated formats in a basic atomic_check callback. > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> > Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> > --- > drivers/gpu/drm/mediatek/mtk_dpi.c | 92 ++++++++++++++++++++++++++++-- > 1 file changed, 87 insertions(+), 5 deletions(-) > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c > index c548780dd3a5..8822d9448ae8 100644 > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c > @@ -536,6 +536,87 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, > return 0; > } > > +#define MAX_OUTPUT_SEL_FORMATS 2 > + > +static u32 *mtk_dpi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge, > + struct drm_bridge_state *bridge_state, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn_state, > + unsigned int *num_output_fmts) > +{ > + u32 *output_fmts; > + struct mtk_dpi *dpi = bridge_to_dpi(bridge); > + > + *num_output_fmts = 0; > + > + output_fmts = kcalloc(MAX_OUTPUT_SEL_FORMATS, sizeof(*output_fmts), > + GFP_KERNEL); > + if (!output_fmts) > + return NULL; > + > + /* Default 8bit RGB fallback */ > + if (dpi->conf->dual_edge) { > + output_fmts[0] = MEDIA_BUS_FMT_RGB888_2X12_LE; > + output_fmts[1] = MEDIA_BUS_FMT_RGB888_2X12_BE; > + *num_output_fmts = 2; > + } else { > + output_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24; > + *num_output_fmts = 1; > + } > + > + return output_fmts; > +} > + > +#define MAX_INPUT_SEL_FORMATS 1 > + > +static u32 *mtk_dpi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge, > + struct drm_bridge_state *bridge_state, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn_state, > + u32 output_fmt, > + unsigned int *num_input_fmts) > +{ > + u32 *input_fmts; > + > + *num_input_fmts = 0; > + > + input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts), > + GFP_KERNEL); > + if (!input_fmts) > + return NULL; > + > + *num_input_fmts = 1; > + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24; > + > + return input_fmts; > +} > + > +static int mtk_dpi_bridge_atomic_check(struct drm_bridge *bridge, > + struct drm_bridge_state *bridge_state, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn_state) > +{ > + struct mtk_dpi *dpi = bridge->driver_private; > + unsigned int out_bus_format; > + > + out_bus_format = bridge_state->output_bus_cfg.format; > + > + dev_dbg(dpi->dev, "input format 0x%04x, output format 0x%04x\n", > + bridge_state->input_bus_cfg.format, > + bridge_state->output_bus_cfg.format); > + > + dpi->ddr_edge_sel = (out_bus_format == MEDIA_BUS_FMT_RGB888_2X12_LE) ? > + true : false; I would like to keep the out_bus_format rather than keep ddr_edge_sel, and in mtk_dpi_dual_edge() use dpi->out_bus_format to decide edge selection. Regards, Chun-Kuang. > + > + dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS; > + dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB; > + dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB; > + dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB; > + > + return 0; > +} > + > static int mtk_dpi_bridge_attach(struct drm_bridge *bridge, > enum drm_bridge_attach_flags flags) > { > > @@ -574,6 +655,12 @@ static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = { > .mode_set = mtk_dpi_bridge_mode_set, > .disable = mtk_dpi_bridge_disable, > .enable = mtk_dpi_bridge_enable, > + .atomic_check = mtk_dpi_bridge_atomic_check, > + .atomic_get_output_bus_fmts = mtk_dpi_bridge_atomic_get_output_bus_fmts, > + .atomic_get_input_bus_fmts = mtk_dpi_bridge_atomic_get_input_bus_fmts, > + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, > + .atomic_reset = drm_atomic_helper_bridge_reset, > }; > > void mtk_dpi_start(struct device *dev) > @@ -620,11 +707,6 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data) > } > drm_connector_attach_encoder(dpi->connector, &dpi->encoder); > > - dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS; > - dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB; > - dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB; > - dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB; > - > return 0; > > err_cleanup: > -- > 2.18.0 >
Hi, Rex: Rex-BC Chen <rex-bc.chen@mediatek.com> 於 2021年4月29日 週四 下午12:16寫道: > > Add the atomic_get_output_bus_fmts, atomic_get_input_bus_fmts to negotiate > the possible output and input formats for the current mode and monitor, > and use the negotiated formats in a basic atomic_check callback. > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> > Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> > --- > drivers/gpu/drm/mediatek/mtk_dpi.c | 92 ++++++++++++++++++++++++++++-- > 1 file changed, 87 insertions(+), 5 deletions(-) > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c > index c548780dd3a5..8822d9448ae8 100644 > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c > @@ -536,6 +536,87 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, > return 0; > } > > +#define MAX_OUTPUT_SEL_FORMATS 2 > + > +static u32 *mtk_dpi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge, > + struct drm_bridge_state *bridge_state, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn_state, > + unsigned int *num_output_fmts) > +{ > + u32 *output_fmts; > + struct mtk_dpi *dpi = bridge_to_dpi(bridge); > + > + *num_output_fmts = 0; > + > + output_fmts = kcalloc(MAX_OUTPUT_SEL_FORMATS, sizeof(*output_fmts), > + GFP_KERNEL); > + if (!output_fmts) > + return NULL; > + > + /* Default 8bit RGB fallback */ > + if (dpi->conf->dual_edge) { > + output_fmts[0] = MEDIA_BUS_FMT_RGB888_2X12_LE; > + output_fmts[1] = MEDIA_BUS_FMT_RGB888_2X12_BE; > + *num_output_fmts = 2; In the definition of dual_edge, it may imply that support MEDIA_BUS_FMT_BGR565_2X8_BE and MEDIA_BUS_FMT_BGR565_2X8_LE. So I would like dpi->conf to store output_fmts instead of dual_edge. The output_fmts could imply use dual_edge or not. Regards, Chun-Kuang. > + } else { > + output_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24; > + *num_output_fmts = 1; > + } > + > + return output_fmts; > +} > + > +#define MAX_INPUT_SEL_FORMATS 1 > + > +static u32 *mtk_dpi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge, > + struct drm_bridge_state *bridge_state, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn_state, > + u32 output_fmt, > + unsigned int *num_input_fmts) > +{ > + u32 *input_fmts; > + > + *num_input_fmts = 0; > + > + input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts), > + GFP_KERNEL); > + if (!input_fmts) > + return NULL; > + > + *num_input_fmts = 1; > + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24; > + > + return input_fmts; > +} > + > +static int mtk_dpi_bridge_atomic_check(struct drm_bridge *bridge, > + struct drm_bridge_state *bridge_state, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn_state) > +{ > + struct mtk_dpi *dpi = bridge->driver_private; > + unsigned int out_bus_format; > + > + out_bus_format = bridge_state->output_bus_cfg.format; > + > + dev_dbg(dpi->dev, "input format 0x%04x, output format 0x%04x\n", > + bridge_state->input_bus_cfg.format, > + bridge_state->output_bus_cfg.format); > + > + dpi->ddr_edge_sel = (out_bus_format == MEDIA_BUS_FMT_RGB888_2X12_LE) ? > + true : false; > + > + dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS; > + dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB; > + dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB; > + dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB; > + > + return 0; > +} > + > static int mtk_dpi_bridge_attach(struct drm_bridge *bridge, > enum drm_bridge_attach_flags flags) > { > > @@ -574,6 +655,12 @@ static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = { > .mode_set = mtk_dpi_bridge_mode_set, > .disable = mtk_dpi_bridge_disable, > .enable = mtk_dpi_bridge_enable, > + .atomic_check = mtk_dpi_bridge_atomic_check, > + .atomic_get_output_bus_fmts = mtk_dpi_bridge_atomic_get_output_bus_fmts, > + .atomic_get_input_bus_fmts = mtk_dpi_bridge_atomic_get_input_bus_fmts, > + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, > + .atomic_reset = drm_atomic_helper_bridge_reset, > }; > > void mtk_dpi_start(struct device *dev) > @@ -620,11 +707,6 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data) > } > drm_connector_attach_encoder(dpi->connector, &dpi->encoder); > > - dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS; > - dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB; > - dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB; > - dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB; > - > return 0; > > err_cleanup: > -- > 2.18.0 >
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c index c548780dd3a5..8822d9448ae8 100644 --- a/drivers/gpu/drm/mediatek/mtk_dpi.c +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c @@ -536,6 +536,87 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, return 0; } +#define MAX_OUTPUT_SEL_FORMATS 2 + +static u32 *mtk_dpi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge, + struct drm_bridge_state *bridge_state, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state, + unsigned int *num_output_fmts) +{ + u32 *output_fmts; + struct mtk_dpi *dpi = bridge_to_dpi(bridge); + + *num_output_fmts = 0; + + output_fmts = kcalloc(MAX_OUTPUT_SEL_FORMATS, sizeof(*output_fmts), + GFP_KERNEL); + if (!output_fmts) + return NULL; + + /* Default 8bit RGB fallback */ + if (dpi->conf->dual_edge) { + output_fmts[0] = MEDIA_BUS_FMT_RGB888_2X12_LE; + output_fmts[1] = MEDIA_BUS_FMT_RGB888_2X12_BE; + *num_output_fmts = 2; + } else { + output_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24; + *num_output_fmts = 1; + } + + return output_fmts; +} + +#define MAX_INPUT_SEL_FORMATS 1 + +static u32 *mtk_dpi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge, + struct drm_bridge_state *bridge_state, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state, + u32 output_fmt, + unsigned int *num_input_fmts) +{ + u32 *input_fmts; + + *num_input_fmts = 0; + + input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts), + GFP_KERNEL); + if (!input_fmts) + return NULL; + + *num_input_fmts = 1; + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24; + + return input_fmts; +} + +static int mtk_dpi_bridge_atomic_check(struct drm_bridge *bridge, + struct drm_bridge_state *bridge_state, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state) +{ + struct mtk_dpi *dpi = bridge->driver_private; + unsigned int out_bus_format; + + out_bus_format = bridge_state->output_bus_cfg.format; + + dev_dbg(dpi->dev, "input format 0x%04x, output format 0x%04x\n", + bridge_state->input_bus_cfg.format, + bridge_state->output_bus_cfg.format); + + dpi->ddr_edge_sel = (out_bus_format == MEDIA_BUS_FMT_RGB888_2X12_LE) ? + true : false; + + dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS; + dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB; + dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB; + dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB; + + return 0; +} + static int mtk_dpi_bridge_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags) { @@ -574,6 +655,12 @@ static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = { .mode_set = mtk_dpi_bridge_mode_set, .disable = mtk_dpi_bridge_disable, .enable = mtk_dpi_bridge_enable, + .atomic_check = mtk_dpi_bridge_atomic_check, + .atomic_get_output_bus_fmts = mtk_dpi_bridge_atomic_get_output_bus_fmts, + .atomic_get_input_bus_fmts = mtk_dpi_bridge_atomic_get_input_bus_fmts, + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, + .atomic_reset = drm_atomic_helper_bridge_reset, }; void mtk_dpi_start(struct device *dev) @@ -620,11 +707,6 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data) } drm_connector_attach_encoder(dpi->connector, &dpi->encoder); - dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS; - dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB; - dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB; - dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB; - return 0; err_cleanup: