diff mbox series

[net,v3] bnxt_en: Fix and improve .ndo_features_check().

Message ID 1620774650-4464-1-git-send-email-michael.chan@broadcom.com (mailing list archive)
State Accepted
Delegated to: Netdev Maintainers
Headers show
Series [net,v3] bnxt_en: Fix and improve .ndo_features_check(). | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net
netdev/subject_prefix success Link
netdev/cc_maintainers fail 2 blamed authors not CCed: sriharsha.basavapatna@broadcom.com edwin.peer@broadcom.com; 2 maintainers not CCed: sriharsha.basavapatna@broadcom.com edwin.peer@broadcom.com
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 144 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Michael Chan May 11, 2021, 11:10 p.m. UTC
Jakub Kicinski pointed out that we need to handle ipv6 extension headers
and to explicitly check for supported tunnel types in
.ndo_features_check().

For ipv6 extension headers, the hardware supports up to 2 ext. headers
and each must be <= 64 bytes.  For tunneled packets, the supported
packets are UDP with supported VXLAN and Geneve ports, GRE, and IPIP.

v3: More improvements based on Alexander Duyck's valuable feedback -
    Remove the jump lable in bnxt_features_check() and restructure it
    so that the TCP/UDP is check is consolidated in bnxt_exthdr_check().

v2: Add missing step to check inner ipv6 header for UDP and GRE tunnels.
    Check TCP/UDP next header after skipping ipv6 ext headers for
    non-tunneled packets and for inner ipv6.
    (Both feedback from Alexander Duyck)

Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Fixes: 1698d600b361 ("bnxt_en: Implement .ndo_features_check().")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 126 ++++++++++++++++++----
 1 file changed, 107 insertions(+), 19 deletions(-)

Comments

Alexander Duyck May 12, 2021, 12:39 a.m. UTC | #1
On Tue, May 11, 2021 at 4:10 PM Michael Chan <michael.chan@broadcom.com> wrote:
>
> Jakub Kicinski pointed out that we need to handle ipv6 extension headers
> and to explicitly check for supported tunnel types in
> .ndo_features_check().
>
> For ipv6 extension headers, the hardware supports up to 2 ext. headers
> and each must be <= 64 bytes.  For tunneled packets, the supported
> packets are UDP with supported VXLAN and Geneve ports, GRE, and IPIP.
>
> v3: More improvements based on Alexander Duyck's valuable feedback -
>     Remove the jump lable in bnxt_features_check() and restructure it
>     so that the TCP/UDP is check is consolidated in bnxt_exthdr_check().
>
> v2: Add missing step to check inner ipv6 header for UDP and GRE tunnels.
>     Check TCP/UDP next header after skipping ipv6 ext headers for
>     non-tunneled packets and for inner ipv6.
>     (Both feedback from Alexander Duyck)
>
> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
> Fixes: 1698d600b361 ("bnxt_en: Implement .ndo_features_check().")
> Signed-off-by: Michael Chan <michael.chan@broadcom.com>

This addresses the concerns I had.

Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
diff mbox series

Patch

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 39ac9e2f5118..a60c694d1c26 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -10785,37 +10785,125 @@  static int bnxt_set_features(struct net_device *dev, netdev_features_t features)
 	return rc;
 }
 
+static bool bnxt_exthdr_check(struct bnxt *bp, struct sk_buff *skb, int nw_off,
+			      u8 **nextp)
+{
+	struct ipv6hdr *ip6h = (struct ipv6hdr *)(skb->data + nw_off);
+	int hdr_count = 0;
+	u8 *nexthdr;
+	int start;
+
+	/* Check that there are at most 2 IPv6 extension headers, no
+	 * fragment header, and each is <= 64 bytes.
+	 */
+	start = nw_off + sizeof(*ip6h);
+	nexthdr = &ip6h->nexthdr;
+	while (ipv6_ext_hdr(*nexthdr)) {
+		struct ipv6_opt_hdr *hp;
+		int hdrlen;
+
+		if (hdr_count >= 3 || *nexthdr == NEXTHDR_NONE ||
+		    *nexthdr == NEXTHDR_FRAGMENT)
+			return false;
+		hp = __skb_header_pointer(NULL, start, sizeof(*hp), skb->data,
+					  skb_headlen(skb), NULL);
+		if (!hp)
+			return false;
+		if (*nexthdr == NEXTHDR_AUTH)
+			hdrlen = ipv6_authlen(hp);
+		else
+			hdrlen = ipv6_optlen(hp);
+
+		if (hdrlen > 64)
+			return false;
+		nexthdr = &hp->nexthdr;
+		start += hdrlen;
+		hdr_count++;
+	}
+	if (nextp) {
+		/* Caller will check inner protocol */
+		if (skb->encapsulation) {
+			*nextp = nexthdr;
+			return true;
+		}
+		*nextp = NULL;
+	}
+	/* Only support TCP/UDP for non-tunneled ipv6 and inner ipv6 */
+	return *nexthdr == IPPROTO_TCP || *nexthdr == IPPROTO_UDP;
+}
+
+/* For UDP, we can only handle 1 Vxlan port and 1 Geneve port. */
+static bool bnxt_udp_tunl_check(struct bnxt *bp, struct sk_buff *skb)
+{
+	struct udphdr *uh = udp_hdr(skb);
+	__be16 udp_port = uh->dest;
+
+	if (udp_port != bp->vxlan_port && udp_port != bp->nge_port)
+		return false;
+	if (skb->inner_protocol_type == ENCAP_TYPE_ETHER) {
+		struct ethhdr *eh = inner_eth_hdr(skb);
+
+		switch (eh->h_proto) {
+		case htons(ETH_P_IP):
+			return true;
+		case htons(ETH_P_IPV6):
+			return bnxt_exthdr_check(bp, skb,
+						 skb_inner_network_offset(skb),
+						 NULL);
+		}
+	}
+	return false;
+}
+
+static bool bnxt_tunl_check(struct bnxt *bp, struct sk_buff *skb, u8 l4_proto)
+{
+	switch (l4_proto) {
+	case IPPROTO_UDP:
+		return bnxt_udp_tunl_check(bp, skb);
+	case IPPROTO_IPIP:
+		return true;
+	case IPPROTO_GRE: {
+		switch (skb->inner_protocol) {
+		default:
+			return false;
+		case htons(ETH_P_IP):
+			return true;
+		case htons(ETH_P_IPV6):
+			fallthrough;
+		}
+	}
+	case IPPROTO_IPV6:
+		/* Check ext headers of inner ipv6 */
+		return bnxt_exthdr_check(bp, skb, skb_inner_network_offset(skb),
+					 NULL);
+	}
+	return false;
+}
+
 static netdev_features_t bnxt_features_check(struct sk_buff *skb,
 					     struct net_device *dev,
 					     netdev_features_t features)
 {
-	struct bnxt *bp;
-	__be16 udp_port;
-	u8 l4_proto = 0;
+	struct bnxt *bp = netdev_priv(dev);
+	u8 *l4_proto;
 
 	features = vlan_features_check(skb, features);
-	if (!skb->encapsulation)
-		return features;
-
 	switch (vlan_get_protocol(skb)) {
 	case htons(ETH_P_IP):
-		l4_proto = ip_hdr(skb)->protocol;
+		if (!skb->encapsulation)
+			return features;
+		l4_proto = &ip_hdr(skb)->protocol;
+		if (bnxt_tunl_check(bp, skb, *l4_proto))
+			return features;
 		break;
 	case htons(ETH_P_IPV6):
-		l4_proto = ipv6_hdr(skb)->nexthdr;
+		if (!bnxt_exthdr_check(bp, skb, skb_network_offset(skb),
+				       &l4_proto))
+			break;
+		if (!l4_proto || bnxt_tunl_check(bp, skb, *l4_proto))
+			return features;
 		break;
-	default:
-		return features;
 	}
-
-	if (l4_proto != IPPROTO_UDP)
-		return features;
-
-	bp = netdev_priv(dev);
-	/* For UDP, we can only handle 1 Vxlan port and 1 Geneve port. */
-	udp_port = udp_hdr(skb)->dest;
-	if (udp_port == bp->vxlan_port || udp_port == bp->nge_port)
-		return features;
 	return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK);
 }