| Message ID | 20210512125042.30973-4-nava.manne@xilinx.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Add Bitstream configuration support for Versal | expand |
On Wed, 12 May 2021 18:20:41 +0530, Nava kishore Manne wrote: > Add documentation to describe Xilinx firmware driver bindings. > Firmware driver provides an interface to firmware APIs. > Interface APIs can be used by any driver to communicate > to Platform Management Unit. > > Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> > --- > Changes for v4: > -Added new yaml file for xilinx firmware > as suggested by Rob. > Changes for v5: > -Fixed some minor issues and updated the fpga node name to versal_fpga. > > .../firmware/xilinx/xlnx,zynqmp-firmware.yaml | 66 +++++++++++++++++++ > 1 file changed, 66 insertions(+) > create mode 100644 Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Unknown file referenced: [Errno 2] No such file or directory: '/usr/local/lib/python3.8/dist-packages/dtschema/schemas/gpio/rockchip,rk3328-grf-gpio.yaml' xargs: dt-doc-validate: exited with status 255; aborting /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/xlnx,versal-clk.example.dt.yaml: zynqmp-firmware: 'clock-controller' does not match any of the regexes: 'pinctrl-[0-9]+', 'versal_fpga' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.example.dt.yaml: zynqmp-firmware: 'zynqmp-aes' does not match any of the regexes: 'pinctrl-[0-9]+', 'versal_fpga' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml See https://patchwork.ozlabs.org/patch/1477568 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml new file mode 100644 index 000000000000..e6848c2dfb67 --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/xilinx/xlnx,zynqmp-firmware.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx firmware driver + +maintainers: + - Nava kishore Manne <nava.manne@xilinx.com> + +description: + The zynqmp-firmware node describes the interface to platform firmware. + ZynqMP has an interface to communicate with secure firmware. Firmware + driver provides an interface to firmware APIs. Interface APIs can be + used by any driver to communicate to PMUFW(Platform Management Unit). + These requests include clock management, pin control, device control, + power management service, FPGA service and other platform management + services. + +properties: + compatible: + oneOf: + - description: + For implementations complying for Zynq Ultrascale+ MPSoC. + const: xlnx,zynqmp-firmware + + - description: + For implementations complying for Versal. + const: xlnx,versal-firmware + + method: + description: | + The method of calling the PM-API firmware layer. + Permitted values are. + - "smc" : SMC #0, following the SMCCC + - "hvc" : HVC #0, following the SMCCC + + $ref: /schemas/types.yaml#/definitions/string-array + enum: + - smc + - hvc + +patternProperties: + "versal_fpga": + $ref: "../../fpga/xlnx,versal-fpga.yaml#" + description: Compatible of the FPGA device. + type: object + + required: + - compatible + +required: + - compatible + +examples: + - | + versal-firmware { + compatible = "xlnx,versal-firmware"; + method = "smc"; + versal_fpga: versal_fpga { + compatible = "xlnx,versal-fpga"; + }; + }; + +additionalProperties: false
Add documentation to describe Xilinx firmware driver bindings. Firmware driver provides an interface to firmware APIs. Interface APIs can be used by any driver to communicate to Platform Management Unit. Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> --- Changes for v4: -Added new yaml file for xilinx firmware as suggested by Rob. Changes for v5: -Fixed some minor issues and updated the fpga node name to versal_fpga. .../firmware/xilinx/xlnx,zynqmp-firmware.yaml | 66 +++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml