| Message ID | 20210510014231.647-3-zev@bewilderbeest.net (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | serial: 8250_aspeed_vuart: fix duplicate __release_region() on unbind | expand |
On Mon, 10 May 2021, at 11:12, Zev Weiss wrote: > Previously this had only been initialized if we hit the throttling path > in aspeed_vuart_handle_irq(); moving it to the probe function is a > slight consistency improvement and avoids redundant reinitialization in > the interrupt handler. It also serves as preparation for converting the > driver's I/O accesses to use port->port.membase instead of its own > vuart->regs. > > Signed-off-by: Zev Weiss <zev@bewilderbeest.net> > --- > drivers/tty/serial/8250/8250_aspeed_vuart.c | 5 ++--- > 1 file changed, 2 insertions(+), 3 deletions(-) > > diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c > b/drivers/tty/serial/8250/8250_aspeed_vuart.c > index 9e8b2e8e32b6..249164dc397b 100644 > --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c > +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c > @@ -349,11 +349,9 @@ static int aspeed_vuart_handle_irq(struct > uart_port *port) > struct aspeed_vuart *vuart = port->private_data; > __aspeed_vuart_set_throttle(up, true); > > - if (!timer_pending(&vuart->unthrottle_timer)) { > - vuart->port = up; > + if (!timer_pending(&vuart->unthrottle_timer)) > mod_timer(&vuart->unthrottle_timer, > jiffies + unthrottle_timeout); > - } > > } else { > count = min(space, 256); > @@ -511,6 +509,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev) > goto err_clk_disable; > > vuart->line = rc; > + vuart->port = serial8250_get_port(vuart->line); The documentation of serial8250_get_port() is somewhat concerning wrt the use: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/tty/serial/8250/8250_core.c?h=v5.13-rc1#n399 However, given the existing behaviour it shouldn't be problematic? Andrew
On Wed, May 12, 2021 at 08:34:06PM CDT, Andrew Jeffery wrote: > > >On Mon, 10 May 2021, at 11:12, Zev Weiss wrote: >> Previously this had only been initialized if we hit the throttling path >> in aspeed_vuart_handle_irq(); moving it to the probe function is a >> slight consistency improvement and avoids redundant reinitialization in >> the interrupt handler. It also serves as preparation for converting the >> driver's I/O accesses to use port->port.membase instead of its own >> vuart->regs. >> >> Signed-off-by: Zev Weiss <zev@bewilderbeest.net> >> --- >> drivers/tty/serial/8250/8250_aspeed_vuart.c | 5 ++--- >> 1 file changed, 2 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c >> b/drivers/tty/serial/8250/8250_aspeed_vuart.c >> index 9e8b2e8e32b6..249164dc397b 100644 >> --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c >> +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c >> @@ -349,11 +349,9 @@ static int aspeed_vuart_handle_irq(struct >> uart_port *port) >> struct aspeed_vuart *vuart = port->private_data; >> __aspeed_vuart_set_throttle(up, true); >> >> - if (!timer_pending(&vuart->unthrottle_timer)) { >> - vuart->port = up; >> + if (!timer_pending(&vuart->unthrottle_timer)) >> mod_timer(&vuart->unthrottle_timer, >> jiffies + unthrottle_timeout); >> - } >> >> } else { >> count = min(space, 256); >> @@ -511,6 +509,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev) >> goto err_clk_disable; >> >> vuart->line = rc; >> + vuart->port = serial8250_get_port(vuart->line); > >The documentation of serial8250_get_port() is somewhat concerning wrt >the use: > >https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/tty/serial/8250/8250_core.c?h=v5.13-rc1#n399 Hmm, good point -- though despite that comment it looks like there is some existing code using it outside of suspend/resume callbacks (in 8250_pci.c and 8250_pnp.c). I'm not certain if those would necessarily be considered good precedent to follow for this, but I don't see any obvious better way of getting hold of the corresponding uart_8250_port (or its port.membase). I did receive a notification that Greg had added this series to his tty-testing branch; not sure if that means he thinks it's OK or if it just kind of slipped by unnoticed though. > >However, given the existing behaviour it shouldn't be problematic? > "existing behaviour" referring to what here? Thanks, Zev
On Fri, 14 May 2021, at 04:55, Zev Weiss wrote: > On Wed, May 12, 2021 at 08:34:06PM CDT, Andrew Jeffery wrote: > > > > > >On Mon, 10 May 2021, at 11:12, Zev Weiss wrote: > >> Previously this had only been initialized if we hit the throttling path > >> in aspeed_vuart_handle_irq(); moving it to the probe function is a > >> slight consistency improvement and avoids redundant reinitialization in > >> the interrupt handler. It also serves as preparation for converting the > >> driver's I/O accesses to use port->port.membase instead of its own > >> vuart->regs. > >> > >> Signed-off-by: Zev Weiss <zev@bewilderbeest.net> > >> --- > >> drivers/tty/serial/8250/8250_aspeed_vuart.c | 5 ++--- > >> 1 file changed, 2 insertions(+), 3 deletions(-) > >> > >> diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c > >> b/drivers/tty/serial/8250/8250_aspeed_vuart.c > >> index 9e8b2e8e32b6..249164dc397b 100644 > >> --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c > >> +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c > >> @@ -349,11 +349,9 @@ static int aspeed_vuart_handle_irq(struct > >> uart_port *port) > >> struct aspeed_vuart *vuart = port->private_data; > >> __aspeed_vuart_set_throttle(up, true); > >> > >> - if (!timer_pending(&vuart->unthrottle_timer)) { > >> - vuart->port = up; > >> + if (!timer_pending(&vuart->unthrottle_timer)) > >> mod_timer(&vuart->unthrottle_timer, > >> jiffies + unthrottle_timeout); > >> - } > >> > >> } else { > >> count = min(space, 256); > >> @@ -511,6 +509,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev) > >> goto err_clk_disable; > >> > >> vuart->line = rc; > >> + vuart->port = serial8250_get_port(vuart->line); > > > >The documentation of serial8250_get_port() is somewhat concerning wrt > >the use: > > > >https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/tty/serial/8250/8250_core.c?h=v5.13-rc1#n399 > > Hmm, good point -- though despite that comment it looks like there is > some existing code using it outside of suspend/resume callbacks (in > 8250_pci.c and 8250_pnp.c). I'm not certain if those would necessarily > be considered good precedent to follow for this, but I don't see any > obvious better way of getting hold of the corresponding uart_8250_port > (or its port.membase). > > I did receive a notification that Greg had added this series to his > tty-testing branch; not sure if that means he thinks it's OK or if it > just kind of slipped by unnoticed though. Yeah, I just highlighted it in case anyone else wanted to weigh in. Essentially I'm just deferring to Greg. If he's picked them up, great! > > > > >However, given the existing behaviour it shouldn't be problematic? > > > > "existing behaviour" referring to what here? Well, we were poking at the registers through vuart->regs anyway. So I don't think what you've done is any less correct. Andrew
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c index 9e8b2e8e32b6..249164dc397b 100644 --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c @@ -349,11 +349,9 @@ static int aspeed_vuart_handle_irq(struct uart_port *port) struct aspeed_vuart *vuart = port->private_data; __aspeed_vuart_set_throttle(up, true); - if (!timer_pending(&vuart->unthrottle_timer)) { - vuart->port = up; + if (!timer_pending(&vuart->unthrottle_timer)) mod_timer(&vuart->unthrottle_timer, jiffies + unthrottle_timeout); - } } else { count = min(space, 256); @@ -511,6 +509,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev) goto err_clk_disable; vuart->line = rc; + vuart->port = serial8250_get_port(vuart->line); rc = of_parse_phandle_with_fixed_args( np, "aspeed,sirq-polarity-sense", 2, 0,
Previously this had only been initialized if we hit the throttling path in aspeed_vuart_handle_irq(); moving it to the probe function is a slight consistency improvement and avoids redundant reinitialization in the interrupt handler. It also serves as preparation for converting the driver's I/O accesses to use port->port.membase instead of its own vuart->regs. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> --- drivers/tty/serial/8250/8250_aspeed_vuart.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)