diff mbox series

[v2,5/6] dt-bindings: phy: qcom, qmp: Add IPQ60xx PCIe PHY bindings

Message ID be83d8580942ab9d141dffff4e4f33f34a4c9ed9.1620203062.git.baruch@tkos.co.il (mailing list archive)
State New, archived
Headers show
Series arm64: IPQ6018 PCIe support | expand

Commit Message

Baruch Siach May 5, 2021, 9:18 a.m. UTC 
Add ipq6018 qmp phy device for the single PCIe serdes lane on IPQ60xx
SoCs.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
 .../devicetree/bindings/phy/qcom,qmp-phy.yaml | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

Comments

Vinod Koul May 14, 2021, 11:43 a.m. UTC | #1 
On 05-05-21, 12:18, Baruch Siach wrote:
> Add ipq6018 qmp phy device for the single PCIe serdes lane on IPQ60xx
> SoCs.

Applied, thanks
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
index 626447fee092..cb2eb7ac6d28 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -17,6 +17,7 @@  description:
 properties:
   compatible:
     enum:
+      - qcom,ipq6018-qmp-pcie-phy
       - qcom,ipq8074-qmp-pcie-phy
       - qcom,ipq8074-qmp-usb3-phy
       - qcom,msm8996-qmp-pcie-phy
@@ -294,6 +295,30 @@  allOf:
           items:
             - const: phy
             - const: common
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq6018-qmp-pcie-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Phy aux clock.
+            - description: Phy config clock.
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+        resets:
+          items:
+            - description: reset of phy block.
+            - description: phy common block reset.
+        reset-names:
+          items:
+            - const: phy
+            - const: common
   - if:
       properties:
         compatible: