diff mbox series

[2/5,v2] iio: accel: st_sensors: Support generic mounting matrix

Message ID 20210517233322.383043-2-linus.walleij@linaro.org (mailing list archive)
State Superseded
Headers show
Series [1/5,v2] iio: st_sensors: Create extended attr macro | expand

Commit Message

Linus Walleij May 17, 2021, 11:33 p.m. UTC 
The ST accelerators support a special type of quirky mounting matrix found
in ACPI systems, but not a generic mounting matrix such as from the device
tree.

Augment the ACPI hack to be a bit more generic and accept a mounting
matrix from device properties.

This makes it possible to fix orientation on the Ux500 HREF device.

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Denis Ciocca <denis.ciocca@st.com>
Cc: Daniel Drake <drake@endlessm.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Make the .mount_matrix member of st_sensor_data a full member
  instead of a pointer so we get rid of a bunch of unneeded
  allocations that could fail.
- Make a drive-by fix to the kerneldoc.
- Use the new ST_SENSORS_LSM_CHANNELS_EXT() to define the channels
  with the extended attribute for mounting matrix.
- Demote the error message at the end of apply_acpi_orientation()
  to dev_dbg() and only print it of ret != 0.
---
 drivers/iio/accel/st_accel_core.c     | 110 +++++++++++++-------------
 include/linux/iio/common/st_sensors.h |   4 +-
 2 files changed, 60 insertions(+), 54 deletions(-)

Comments

Andy Shevchenko May 18, 2021, 11:03 a.m. UTC | #1 
On Tue, May 18, 2021 at 01:33:19AM +0200, Linus Walleij wrote:
> The ST accelerators support a special type of quirky mounting matrix found
> in ACPI systems, but not a generic mounting matrix such as from the device
> tree.
> 
> Augment the ACPI hack to be a bit more generic and accept a mounting
> matrix from device properties.
> 
> This makes it possible to fix orientation on the Ux500 HREF device.

...

> +static const struct iio_chan_spec_ext_info st_accel_mount_matrix_ext_info[] = {
> +	IIO_MOUNT_MATRIX(IIO_SHARED_BY_ALL, st_accel_get_mount_matrix),
> +	{ },

Comma is not needed for terminator lines.

> +};

...

> +	/* First try ACPI orientation then try the generic function */

It's a bit confusing, because the generic also tries ACPI.

Perhaps "...try specific ACPI methods to retrieve orientation, then..."?

> +	err = apply_acpi_orientation(indio_dev);
> +	if (err) {
> +		err = iio_read_mount_matrix(adata->dev, "mount-matrix",
> +					    &adata->mount_matrix);
> +		if (err)
> +			goto st_accel_power_off;
> +	}
diff mbox series

Patch

diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 43c50167d220..8044b8ae7ead 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -41,51 +41,74 @@ 
 #define ST_ACCEL_FS_AVL_200G			200
 #define ST_ACCEL_FS_AVL_400G			400
 
+static const struct iio_mount_matrix *
+st_accel_get_mount_matrix(const struct iio_dev *indio_dev,
+			  const struct iio_chan_spec *chan)
+{
+	struct st_sensor_data *adata = iio_priv(indio_dev);
+
+	return &adata->mount_matrix;
+}
+
+static const struct iio_chan_spec_ext_info st_accel_mount_matrix_ext_info[] = {
+	IIO_MOUNT_MATRIX(IIO_SHARED_BY_ALL, st_accel_get_mount_matrix),
+	{ },
+};
+
 static const struct iio_chan_spec st_accel_8bit_channels[] = {
-	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+	ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 8, 8,
-			ST_ACCEL_DEFAULT_OUT_X_L_ADDR+1),
-	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			ST_ACCEL_DEFAULT_OUT_X_L_ADDR+1,
+			st_accel_mount_matrix_ext_info),
+	ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 8, 8,
-			ST_ACCEL_DEFAULT_OUT_Y_L_ADDR+1),
-	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			ST_ACCEL_DEFAULT_OUT_Y_L_ADDR+1,
+			st_accel_mount_matrix_ext_info),
+	ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 8, 8,
-			ST_ACCEL_DEFAULT_OUT_Z_L_ADDR+1),
+			ST_ACCEL_DEFAULT_OUT_Z_L_ADDR+1,
+			st_accel_mount_matrix_ext_info),
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };
 
 static const struct iio_chan_spec st_accel_12bit_channels[] = {
-	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+	ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 12, 16,
-			ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			ST_ACCEL_DEFAULT_OUT_X_L_ADDR,
+			st_accel_mount_matrix_ext_info),
+	ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 12, 16,
-			ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			ST_ACCEL_DEFAULT_OUT_Y_L_ADDR,
+			st_accel_mount_matrix_ext_info),
+	ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 12, 16,
-			ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+			ST_ACCEL_DEFAULT_OUT_Z_L_ADDR,
+			st_accel_mount_matrix_ext_info),
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };
 
 static const struct iio_chan_spec st_accel_16bit_channels[] = {
-	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+	ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
-			ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			ST_ACCEL_DEFAULT_OUT_X_L_ADDR,
+			st_accel_mount_matrix_ext_info),
+	ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
-			ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			ST_ACCEL_DEFAULT_OUT_Y_L_ADDR,
+			st_accel_mount_matrix_ext_info),
+	ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
-			ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+			ST_ACCEL_DEFAULT_OUT_Z_L_ADDR,
+			st_accel_mount_matrix_ext_info),
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };
 
@@ -1070,25 +1093,10 @@  static const struct iio_trigger_ops st_accel_trigger_ops = {
 #endif
 
 #ifdef CONFIG_ACPI
-static const struct iio_mount_matrix *
-get_mount_matrix(const struct iio_dev *indio_dev,
-		 const struct iio_chan_spec *chan)
-{
-	struct st_sensor_data *adata = iio_priv(indio_dev);
-
-	return adata->mount_matrix;
-}
-
-static const struct iio_chan_spec_ext_info mount_matrix_ext_info[] = {
-	IIO_MOUNT_MATRIX(IIO_SHARED_BY_ALL, get_mount_matrix),
-	{ },
-};
-
 /* Read ST-specific _ONT orientation data from ACPI and generate an
  * appropriate mount matrix.
  */
-static int apply_acpi_orientation(struct iio_dev *indio_dev,
-				  struct iio_chan_spec *channels)
+static int apply_acpi_orientation(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *adata = iio_priv(indio_dev);
 	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
@@ -1177,14 +1185,6 @@  static int apply_acpi_orientation(struct iio_dev *indio_dev,
 	}
 
 	/* Convert our integer matrix to a string-based iio_mount_matrix */
-	adata->mount_matrix = devm_kmalloc(&indio_dev->dev,
-					   sizeof(*adata->mount_matrix),
-					   GFP_KERNEL);
-	if (!adata->mount_matrix) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
 	for (i = 0; i < 3; i++) {
 		for (j = 0; j < 3; j++) {
 			int matrix_val = final_ont[i][j];
@@ -1203,26 +1203,25 @@  static int apply_acpi_orientation(struct iio_dev *indio_dev,
 			default:
 				goto out;
 			}
-			adata->mount_matrix->rotation[i * 3 + j] = str_value;
+			adata->mount_matrix.rotation[i * 3 + j] = str_value;
 		}
 	}
 
-	/* Expose the mount matrix via ext_info */
-	for (i = 0; i < indio_dev->num_channels; i++)
-		channels[i].ext_info = mount_matrix_ext_info;
-
 	ret = 0;
 	dev_info(&indio_dev->dev, "computed mount matrix from ACPI\n");
 
 out:
 	kfree(buffer.pointer);
+	if (ret)
+		dev_dbg(&indio_dev->dev,
+			"failed to apply ACPI orientation data: %d\n", ret);
+
 	return ret;
 }
 #else /* !CONFIG_ACPI */
-static int apply_acpi_orientation(struct iio_dev *indio_dev,
-				  struct iio_chan_spec *channels)
+static int apply_acpi_orientation(struct iio_dev *indio_dev)
 {
-	return 0;
+	return -EINVAL;
 }
 #endif
 
@@ -1275,9 +1274,14 @@  int st_accel_common_probe(struct iio_dev *indio_dev)
 		goto st_accel_power_off;
 	}
 
-	if (apply_acpi_orientation(indio_dev, channels))
-		dev_warn(&indio_dev->dev,
-			 "failed to apply ACPI orientation data: %d\n", err);
+	/* First try ACPI orientation then try the generic function */
+	err = apply_acpi_orientation(indio_dev);
+	if (err) {
+		err = iio_read_mount_matrix(adata->dev, "mount-matrix",
+					    &adata->mount_matrix);
+		if (err)
+			goto st_accel_power_off;
+	}
 
 	indio_dev->channels = channels;
 	adata->current_fullscale = &adata->sensor_settings->fs.fs_avl[0];
diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
index 704217a5c3ba..9ac456973688 100644
--- a/include/linux/iio/common/st_sensors.h
+++ b/include/linux/iio/common/st_sensors.h
@@ -13,6 +13,7 @@ 
 #include <linux/i2c.h>
 #include <linux/spi/spi.h>
 #include <linux/irqreturn.h>
+#include <linux/iio/iio.h>
 #include <linux/iio/trigger.h>
 #include <linux/bitops.h>
 #include <linux/regulator/consumer.h>
@@ -219,6 +220,7 @@  struct st_sensor_settings {
  * struct st_sensor_data - ST sensor device status
  * @dev: Pointer to instance of struct device (I2C or SPI).
  * @trig: The trigger in use by the core driver.
+ * @mount_matrix: The mounting matrix of the sensor.
  * @sensor_settings: Pointer to the specific sensor settings in use.
  * @current_fullscale: Maximum range of measure by the sensor.
  * @vdd: Pointer to sensor's Vdd power supply
@@ -238,7 +240,7 @@  struct st_sensor_settings {
 struct st_sensor_data {
 	struct device *dev;
 	struct iio_trigger *trig;
-	struct iio_mount_matrix *mount_matrix;
+	struct iio_mount_matrix mount_matrix;
 	struct st_sensor_settings *sensor_settings;
 	struct st_sensor_fullscale_avl *current_fullscale;
 	struct regulator *vdd;