| Message ID | 20210505213731.538612-10-bhupesh.sharma@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Enable Qualcomm Crypto Engine on sm8250 | expand |
On Wed 05 May 16:37 CDT 2021, Bhupesh Sharma wrote: > From: Thara Gopinath <thara.gopinath@linaro.org> > > Crypto engine on certain Snapdragon processors like sm8150, sm8250, sm8350 > etc. requires interconnect path between the engine and memory to be > explicitly enabled and bandwidth set prior to any operations. Add support > in the qce core to enable the interconnect path appropriately. > > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Andy Gross <agross@kernel.org> > Cc: Herbert Xu <herbert@gondor.apana.org.au> > Cc: David S. Miller <davem@davemloft.net> > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Michael Turquette <mturquette@baylibre.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: dmaengine@vger.kernel.org > Cc: linux-clk@vger.kernel.org > Cc: linux-crypto@vger.kernel.org > Cc: devicetree@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > Cc: bhupesh.linux@gmail.com > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > [Make header file inclusion alphabetical] > Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> This says that you prepared the patch, then Thara picked up the patch and sorted the includes. But somehow you then sent the patch. I.e. you name should be the last - unless you jointly wrote the path, in which case you should also add a "Co-developed-by: Thara". > --- > drivers/crypto/qce/core.c | 35 ++++++++++++++++++++++++++++------- > drivers/crypto/qce/core.h | 1 + > 2 files changed, 29 insertions(+), 7 deletions(-) > > diff --git a/drivers/crypto/qce/core.c b/drivers/crypto/qce/core.c > index 80b75085c265..92a0ff1d357e 100644 > --- a/drivers/crypto/qce/core.c > +++ b/drivers/crypto/qce/core.c > @@ -5,6 +5,7 @@ > > #include <linux/clk.h> > #include <linux/dma-mapping.h> > +#include <linux/interconnect.h> > #include <linux/interrupt.h> > #include <linux/module.h> > #include <linux/mod_devicetable.h> > @@ -21,6 +22,8 @@ > #define QCE_MAJOR_VERSION5 0x05 > #define QCE_QUEUE_LENGTH 1 > > +#define QCE_DEFAULT_MEM_BANDWIDTH 393600 Do we know what this rate is? > + > static const struct qce_algo_ops *qce_ops[] = { > #ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER > &skcipher_ops, > @@ -202,21 +205,35 @@ static int qce_crypto_probe(struct platform_device *pdev) > if (ret < 0) > return ret; > > + qce->mem_path = of_icc_get(qce->dev, "memory"); Using devm_of_icc_get() would save you some changes to the error path. > + if (IS_ERR(qce->mem_path)) > + return PTR_ERR(qce->mem_path); > + > qce->core = devm_clk_get(qce->dev, "core"); > - if (IS_ERR(qce->core)) > - return PTR_ERR(qce->core); > + if (IS_ERR(qce->core)) { > + ret = PTR_ERR(qce->core); > + goto err_mem_path_put; > + } > > qce->iface = devm_clk_get(qce->dev, "iface"); > - if (IS_ERR(qce->iface)) > - return PTR_ERR(qce->iface); > + if (IS_ERR(qce->iface)) { > + ret = PTR_ERR(qce->iface); > + goto err_mem_path_put; > + } > > qce->bus = devm_clk_get(qce->dev, "bus"); > - if (IS_ERR(qce->bus)) > - return PTR_ERR(qce->bus); > + if (IS_ERR(qce->bus)) { > + ret = PTR_ERR(qce->bus); > + goto err_mem_path_put; > + } > + > + ret = icc_set_bw(qce->mem_path, QCE_DEFAULT_MEM_BANDWIDTH, QCE_DEFAULT_MEM_BANDWIDTH); > + if (ret) > + goto err_mem_path_put; > > ret = clk_prepare_enable(qce->core); > if (ret) > - return ret; > + goto err_mem_path_disable; > > ret = clk_prepare_enable(qce->iface); > if (ret) > @@ -256,6 +273,10 @@ static int qce_crypto_probe(struct platform_device *pdev) > clk_disable_unprepare(qce->iface); > err_clks_core: > clk_disable_unprepare(qce->core); > +err_mem_path_disable: > + icc_set_bw(qce->mem_path, 0, 0); When you icc_put() (or devm_of_icc_get() does it for you) the path's votes are implicitly set to 0, so you don't need to do this. And as such, you don't need to change the error path at all. Regards, Bjorn > +err_mem_path_put: > + icc_put(qce->mem_path); > return ret; > } > > diff --git a/drivers/crypto/qce/core.h b/drivers/crypto/qce/core.h > index 085774cdf641..228fcd69ec51 100644 > --- a/drivers/crypto/qce/core.h > +++ b/drivers/crypto/qce/core.h > @@ -35,6 +35,7 @@ struct qce_device { > void __iomem *base; > struct device *dev; > struct clk *core, *iface, *bus; > + struct icc_path *mem_path; > struct qce_dma_data dma; > int burst_size; > unsigned int pipe_pair_id; > -- > 2.30.2 >
On 5/18/21 11:07 AM, Bjorn Andersson wrote: > On Wed 05 May 16:37 CDT 2021, Bhupesh Sharma wrote: > >> From: Thara Gopinath <thara.gopinath@linaro.org> >> >> Crypto engine on certain Snapdragon processors like sm8150, sm8250, sm8350 >> etc. requires interconnect path between the engine and memory to be >> explicitly enabled and bandwidth set prior to any operations. Add support >> in the qce core to enable the interconnect path appropriately. >> >> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> >> Cc: Rob Herring <robh+dt@kernel.org> >> Cc: Andy Gross <agross@kernel.org> >> Cc: Herbert Xu <herbert@gondor.apana.org.au> >> Cc: David S. Miller <davem@davemloft.net> >> Cc: Stephen Boyd <sboyd@kernel.org> >> Cc: Michael Turquette <mturquette@baylibre.com> >> Cc: Vinod Koul <vkoul@kernel.org> >> Cc: dmaengine@vger.kernel.org >> Cc: linux-clk@vger.kernel.org >> Cc: linux-crypto@vger.kernel.org >> Cc: devicetree@vger.kernel.org >> Cc: linux-kernel@vger.kernel.org >> Cc: bhupesh.linux@gmail.com >> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> >> [Make header file inclusion alphabetical] >> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> > > This says that you prepared the patch, then Thara picked up the patch > and sorted the includes. But somehow you then sent the patch. > > I.e. you name should be the last - unless you jointly wrote the path, in > which case you should also add a "Co-developed-by: Thara". > >> --- >> drivers/crypto/qce/core.c | 35 ++++++++++++++++++++++++++++------- >> drivers/crypto/qce/core.h | 1 + >> 2 files changed, 29 insertions(+), 7 deletions(-) >> >> diff --git a/drivers/crypto/qce/core.c b/drivers/crypto/qce/core.c >> index 80b75085c265..92a0ff1d357e 100644 >> --- a/drivers/crypto/qce/core.c >> +++ b/drivers/crypto/qce/core.c >> @@ -5,6 +5,7 @@ >> >> #include <linux/clk.h> >> #include <linux/dma-mapping.h> >> +#include <linux/interconnect.h> >> #include <linux/interrupt.h> >> #include <linux/module.h> >> #include <linux/mod_devicetable.h> >> @@ -21,6 +22,8 @@ >> #define QCE_MAJOR_VERSION5 0x05 >> #define QCE_QUEUE_LENGTH 1 >> >> +#define QCE_DEFAULT_MEM_BANDWIDTH 393600 > > Do we know what this rate is? > >> + >> static const struct qce_algo_ops *qce_ops[] = { >> #ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER >> &skcipher_ops, >> @@ -202,21 +205,35 @@ static int qce_crypto_probe(struct platform_device *pdev) >> if (ret < 0) >> return ret; >> >> + qce->mem_path = of_icc_get(qce->dev, "memory"); > > Using devm_of_icc_get() would save you some changes to the error path. Right. I keep forgetting to use the devm_ version! Bhupesh, will you do these changes or do you want me to ?
Hi Bjorn, Thanks for the review. On Tue, 18 May 2021 at 20:37, Bjorn Andersson <bjorn.andersson@linaro.org> wrote: > > On Wed 05 May 16:37 CDT 2021, Bhupesh Sharma wrote: > > > From: Thara Gopinath <thara.gopinath@linaro.org> > > > > Crypto engine on certain Snapdragon processors like sm8150, sm8250, sm8350 > > etc. requires interconnect path between the engine and memory to be > > explicitly enabled and bandwidth set prior to any operations. Add support > > in the qce core to enable the interconnect path appropriately. > > > > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > > Cc: Rob Herring <robh+dt@kernel.org> > > Cc: Andy Gross <agross@kernel.org> > > Cc: Herbert Xu <herbert@gondor.apana.org.au> > > Cc: David S. Miller <davem@davemloft.net> > > Cc: Stephen Boyd <sboyd@kernel.org> > > Cc: Michael Turquette <mturquette@baylibre.com> > > Cc: Vinod Koul <vkoul@kernel.org> > > Cc: dmaengine@vger.kernel.org > > Cc: linux-clk@vger.kernel.org > > Cc: linux-crypto@vger.kernel.org > > Cc: devicetree@vger.kernel.org > > Cc: linux-kernel@vger.kernel.org > > Cc: bhupesh.linux@gmail.com > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > > [Make header file inclusion alphabetical] > > Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> > > This says that you prepared the patch, then Thara picked up the patch > and sorted the includes. But somehow you then sent the patch. > > I.e. you name should be the last - unless you jointly wrote the path, in > which case you should also add a "Co-developed-by: Thara". No, it's the other way around. Thara prepared the patch (as the 'From:' field suggests) and I just changed the inclusion order of the header files and made it in alphabetical order. I will move my S-o-b later in the order. > > --- > > drivers/crypto/qce/core.c | 35 ++++++++++++++++++++++++++++------- > > drivers/crypto/qce/core.h | 1 + > > 2 files changed, 29 insertions(+), 7 deletions(-) > > > > diff --git a/drivers/crypto/qce/core.c b/drivers/crypto/qce/core.c > > index 80b75085c265..92a0ff1d357e 100644 > > --- a/drivers/crypto/qce/core.c > > +++ b/drivers/crypto/qce/core.c > > @@ -5,6 +5,7 @@ > > > > #include <linux/clk.h> > > #include <linux/dma-mapping.h> > > +#include <linux/interconnect.h> > > #include <linux/interrupt.h> > > #include <linux/module.h> > > #include <linux/mod_devicetable.h> > > @@ -21,6 +22,8 @@ > > #define QCE_MAJOR_VERSION5 0x05 > > #define QCE_QUEUE_LENGTH 1 > > > > +#define QCE_DEFAULT_MEM_BANDWIDTH 393600 > > Do we know what this rate is? I think this corresponds to the arbitrated bandwidth / instantaneous bandwidth (in KBps) for the qce crypto part [I think 'average/peak bandwidth' would be a better terminology :) ]. Maybe Thara can add more comments here. > > + > > static const struct qce_algo_ops *qce_ops[] = { > > #ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER > > &skcipher_ops, > > @@ -202,21 +205,35 @@ static int qce_crypto_probe(struct platform_device *pdev) > > if (ret < 0) > > return ret; > > > > + qce->mem_path = of_icc_get(qce->dev, "memory"); > > Using devm_of_icc_get() would save you some changes to the error path. Ok, I can address this in v3. > > + if (IS_ERR(qce->mem_path)) > > + return PTR_ERR(qce->mem_path); > > + > > qce->core = devm_clk_get(qce->dev, "core"); > > - if (IS_ERR(qce->core)) > > - return PTR_ERR(qce->core); > > + if (IS_ERR(qce->core)) { > > + ret = PTR_ERR(qce->core); > > + goto err_mem_path_put; > > + } > > > > qce->iface = devm_clk_get(qce->dev, "iface"); > > - if (IS_ERR(qce->iface)) > > - return PTR_ERR(qce->iface); > > + if (IS_ERR(qce->iface)) { > > + ret = PTR_ERR(qce->iface); > > + goto err_mem_path_put; > > + } > > > > qce->bus = devm_clk_get(qce->dev, "bus"); > > - if (IS_ERR(qce->bus)) > > - return PTR_ERR(qce->bus); > > + if (IS_ERR(qce->bus)) { > > + ret = PTR_ERR(qce->bus); > > + goto err_mem_path_put; > > + } > > + > > + ret = icc_set_bw(qce->mem_path, QCE_DEFAULT_MEM_BANDWIDTH, QCE_DEFAULT_MEM_BANDWIDTH); > > + if (ret) > > + goto err_mem_path_put; > > > > ret = clk_prepare_enable(qce->core); > > if (ret) > > - return ret; > > + goto err_mem_path_disable; > > > > ret = clk_prepare_enable(qce->iface); > > if (ret) > > @@ -256,6 +273,10 @@ static int qce_crypto_probe(struct platform_device *pdev) > > clk_disable_unprepare(qce->iface); > > err_clks_core: > > clk_disable_unprepare(qce->core); > > +err_mem_path_disable: > > + icc_set_bw(qce->mem_path, 0, 0); > > When you icc_put() (or devm_of_icc_get() does it for you) the path's > votes are implicitly set to 0, so you don't need to do this. > > And as such, you don't need to change the error path at all. Ok, got it. Will change v3 accordingly. Thanks, Bhupesh > > +err_mem_path_put: > > + icc_put(qce->mem_path); > > return ret; > > } > > > > diff --git a/drivers/crypto/qce/core.h b/drivers/crypto/qce/core.h > > index 085774cdf641..228fcd69ec51 100644 > > --- a/drivers/crypto/qce/core.h > > +++ b/drivers/crypto/qce/core.h > > @@ -35,6 +35,7 @@ struct qce_device { > > void __iomem *base; > > struct device *dev; > > struct clk *core, *iface, *bus; > > + struct icc_path *mem_path; > > struct qce_dma_data dma; > > int burst_size; > > unsigned int pipe_pair_id; > > -- > > 2.30.2 > >
diff --git a/drivers/crypto/qce/core.c b/drivers/crypto/qce/core.c index 80b75085c265..92a0ff1d357e 100644 --- a/drivers/crypto/qce/core.c +++ b/drivers/crypto/qce/core.c @@ -5,6 +5,7 @@ #include <linux/clk.h> #include <linux/dma-mapping.h> +#include <linux/interconnect.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/mod_devicetable.h> @@ -21,6 +22,8 @@ #define QCE_MAJOR_VERSION5 0x05 #define QCE_QUEUE_LENGTH 1 +#define QCE_DEFAULT_MEM_BANDWIDTH 393600 + static const struct qce_algo_ops *qce_ops[] = { #ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER &skcipher_ops, @@ -202,21 +205,35 @@ static int qce_crypto_probe(struct platform_device *pdev) if (ret < 0) return ret; + qce->mem_path = of_icc_get(qce->dev, "memory"); + if (IS_ERR(qce->mem_path)) + return PTR_ERR(qce->mem_path); + qce->core = devm_clk_get(qce->dev, "core"); - if (IS_ERR(qce->core)) - return PTR_ERR(qce->core); + if (IS_ERR(qce->core)) { + ret = PTR_ERR(qce->core); + goto err_mem_path_put; + } qce->iface = devm_clk_get(qce->dev, "iface"); - if (IS_ERR(qce->iface)) - return PTR_ERR(qce->iface); + if (IS_ERR(qce->iface)) { + ret = PTR_ERR(qce->iface); + goto err_mem_path_put; + } qce->bus = devm_clk_get(qce->dev, "bus"); - if (IS_ERR(qce->bus)) - return PTR_ERR(qce->bus); + if (IS_ERR(qce->bus)) { + ret = PTR_ERR(qce->bus); + goto err_mem_path_put; + } + + ret = icc_set_bw(qce->mem_path, QCE_DEFAULT_MEM_BANDWIDTH, QCE_DEFAULT_MEM_BANDWIDTH); + if (ret) + goto err_mem_path_put; ret = clk_prepare_enable(qce->core); if (ret) - return ret; + goto err_mem_path_disable; ret = clk_prepare_enable(qce->iface); if (ret) @@ -256,6 +273,10 @@ static int qce_crypto_probe(struct platform_device *pdev) clk_disable_unprepare(qce->iface); err_clks_core: clk_disable_unprepare(qce->core); +err_mem_path_disable: + icc_set_bw(qce->mem_path, 0, 0); +err_mem_path_put: + icc_put(qce->mem_path); return ret; } diff --git a/drivers/crypto/qce/core.h b/drivers/crypto/qce/core.h index 085774cdf641..228fcd69ec51 100644 --- a/drivers/crypto/qce/core.h +++ b/drivers/crypto/qce/core.h @@ -35,6 +35,7 @@ struct qce_device { void __iomem *base; struct device *dev; struct clk *core, *iface, *bus; + struct icc_path *mem_path; struct qce_dma_data dma; int burst_size; unsigned int pipe_pair_id;