| Message ID | 1621592844-6414-1-git-send-email-mkrishn@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v17,1/4] dt-bindings: msm: disp: add yaml schemas for DPU bindings | expand |
On Fri 21 May 05:27 CDT 2021, Krishna Manikandan wrote: > diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml [..] > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + description: | > + Contains the list of output ports from DPU device. These ports > + connect to interfaces that are external to the DPU hardware, > + such as DSI, DP etc. Each output port contains an endpoint that > + describes how it is connected to an external interface. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: DPU_INTF1 (DSI1) > + > + port@2: > + $ref: /schemas/graph.yaml#/properties/port > + description: DPU_INTF0 (DP) Why is port@0 INTF1 and why is port@2 INTF0? In the binding you're translating the two ports that are described are 0 and 1, representing INTF1 and INTF2, or DSI1 and DSI2, respectively. Further more, I have a need for somehow describing the pairing of 4 DP INTFs (INTF 0, 3, 4 and 5) and how they are connected to the 3+1 DP+eDP controllers. Downstream this seems to be handled by adding cell-index to the DP controllers and then matching that against the numbering in the driver's INTF array. But rather than adding cell-index to map this, can't we define that the port index is the INTF-number here? This would obviously break compatibility with existing DTBs, but we could start by doing it selectively for the new compatibles, fix up the existing dts files and then drop the selective application after 1 or 2 LTS releases. > + > + required: > + - port@0 Does this imply that I am not allowed to build a product on sc7180 that only has DP output? > + > + required: > + - compatible > + - reg > + - reg-names > + - clocks > + - interrupts > + - power-domains > + - operating-points-v2 > + - ports > + > +required: > + - compatible > + - reg > + - reg-names > + - power-domains > + - clocks > + - interrupts > + - interrupt-controller > + - iommus > + - ranges > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/qcom,dispcc-sc7180.h> > + #include <dt-bindings/clock/qcom,gcc-sc7180.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/interconnect/qcom,sdm845.h> > + #include <dt-bindings/power/qcom-rpmpd.h> > + > + display-subsystem@ae00000 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "qcom,sc7180-mdss"; > + reg = <0xae00000 0x1000>; > + reg-names = "mdss"; > + power-domains = <&dispcc MDSS_GDSC>; > + clocks = <&gcc GCC_DISP_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>; > + clock-names = "iface", "ahb", "core"; > + > + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <1>; > + > + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; > + interconnect-names = "mdp0-mem"; > + > + iommus = <&apps_smmu 0x800 0x2>; > + ranges; > + > + display-controller@ae01000 { > + compatible = "qcom,sc7180-dpu"; > + reg = <0x0ae01000 0x8f000>, > + <0x0aeb0000 0x2008>; > + > + reg-names = "mdp", "vbif"; > + > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_ROT_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>, > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + clock-names = "bus", "iface", "rot", "lut", "core", > + "vsync"; > + > + interrupt-parent = <&mdss>; > + interrupts = <0>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&mdp_opp_table>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dpu_intf1_out: endpoint { > + remote-endpoint = <&dsi0_in>; > + }; > + }; > + > + port@2 { > + reg = <2>; > + dpu_intf0_out: endpoint { > + remote-endpoint = <&dp_in>; > + }; > + }; The indentation is inconsistent among the ports. > + }; > + }; > + }; > +... > diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml > new file mode 100644 > index 0000000..b4ea7c9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml > @@ -0,0 +1,212 @@ > +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/msm/dpu-sdm845.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Display DPU dt properties for SDM845 target > + > +maintainers: > + - Krishna Manikandan <mkrishn@codeaurora.org> > + > +description: | > + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates > + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree > + bindings of MDSS and DPU are mentioned for SDM845 target. > + > +properties: > + compatible: > + items: > + - const: qcom,sdm845-mdss > + > + reg: > + maxItems: 1 > + > + reg-names: > + const: mdss > + > + power-domains: > + maxItems: 1 > + > + clocks: > + items: > + - description: Display AHB clock from gcc > + - description: Display AXI clock > + - description: Display core clock > + > + clock-names: > + items: > + - const: iface > + - const: bus > + - const: core > + > + interrupts: > + maxItems: 1 > + > + interrupt-controller: true > + > + "#address-cells": true > + > + "#size-cells": true > + > + "#interrupt-cells": > + const: 1 > + > + iommus: > + items: > + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 > + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1 > + > + ranges: true > + > +patternProperties: > + "^display-controller@[0-9a-f]+$": > + type: object > + description: Node containing the properties of DPU. > + > + properties: > + compatible: > + items: > + - const: qcom,sdm845-dpu > + > + reg: > + items: > + - description: Address offset and size for mdp register set > + - description: Address offset and size for vbif register set > + > + reg-names: > + items: > + - const: mdp > + - const: vbif > + > + clocks: > + items: > + - description: Display ahb clock > + - description: Display axi clock > + - description: Display core clock > + - description: Display vsync clock > + > + clock-names: > + items: > + - const: iface > + - const: bus > + - const: core > + - const: vsync > + > + interrupts: > + maxItems: 1 > + > + power-domains: > + maxItems: 1 > + > + operating-points-v2: true You have a blank line between all other properties, but not here. > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + description: | > + Contains the list of output ports from DPU device. These ports > + connect to interfaces that are external to the DPU hardware, > + such as DSI, DP etc. Each output port contains an endpoint that > + describes how it is connected to an external interface. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: DPU_INTF1 (DSI1) > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: DPU_INTF2 (DSI2) > + > + required: > + - port@0 > + - port@1 In what sense are both these required? > + Regards, Bjorn
On Fri 21 May 11:00 CDT 2021, Bjorn Andersson wrote: > On Fri 21 May 05:27 CDT 2021, Krishna Manikandan wrote: > > diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml > [..] > > + ports: > > + $ref: /schemas/graph.yaml#/properties/ports > > + description: | > > + Contains the list of output ports from DPU device. These ports > > + connect to interfaces that are external to the DPU hardware, > > + such as DSI, DP etc. Each output port contains an endpoint that > > + describes how it is connected to an external interface. > > + > > + properties: > > + port@0: > > + $ref: /schemas/graph.yaml#/properties/port > > + description: DPU_INTF1 (DSI1) > > + > > + port@2: > > + $ref: /schemas/graph.yaml#/properties/port > > + description: DPU_INTF0 (DP) > > Why is port@0 INTF1 and why is port@2 INTF0? In the binding you're > translating the two ports that are described are 0 and 1, representing > INTF1 and INTF2, or DSI1 and DSI2, respectively. > > Further more, I have a need for somehow describing the pairing of 4 DP > INTFs (INTF 0, 3, 4 and 5) and how they are connected to the 3+1 DP+eDP > controllers. > > Downstream this seems to be handled by adding cell-index to the DP > controllers and then matching that against the numbering in the driver's > INTF array. But rather than adding cell-index to map this, can't we > define that the port index is the INTF-number here? > > > This would obviously break compatibility with existing DTBs, but we > could start by doing it selectively for the new compatibles, fix up the > existing dts files and then drop the selective application after 1 or 2 > LTS releases. > In a chat with Rob I realized that my feedback here is unrelated to the yaml conversion and any conclusions of this discussion should be a separate patch anyways. So with the two style issues below resolve you have my: Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> [..] > > +examples: [..] > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + dpu_intf1_out: endpoint { > > + remote-endpoint = <&dsi0_in>; > > + }; > > + }; > > + > > + port@2 { > > + reg = <2>; > > + dpu_intf0_out: endpoint { > > + remote-endpoint = <&dp_in>; > > + }; > > + }; > > The indentation is inconsistent among the ports. > > > + }; > > + }; > > + }; > > +... > > diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml [..] > > + operating-points-v2: true > > You have a blank line between all other properties, but not here. > > > + ports: Regards, Bjorn
On Fri, 21 May 2021 15:57:21 +0530, Krishna Manikandan wrote: > MSM Mobile Display Subsystem (MDSS) encapsulates sub-blocks > like DPU display controller, DSI etc. Add YAML schema > for DPU device tree bindings. > > Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org> > > Changes in v2: > - Changed dpu to DPU (Sam Ravnborg) > - Fixed indentation issues (Sam Ravnborg) > - Added empty line between different properties (Sam Ravnborg) > - Replaced reference txt files with their corresponding > yaml files (Sam Ravnborg) > - Modified the file to use "|" only when it is > necessary (Sam Ravnborg) > > Changes in v3: > - Corrected the license used (Rob Herring) > - Added maxItems for properties (Rob Herring) > - Dropped generic descriptions (Rob Herring) > - Added ranges property (Rob Herring) > - Corrected the indendation (Rob Herring) > - Added additionalProperties (Rob Herring) > - Split dsi file into two, one for dsi controller > and another one for dsi phy per target (Rob Herring) > - Corrected description for pinctrl-names (Rob Herring) > - Corrected the examples used in yaml file (Rob Herring) > - Delete dsi.txt and dpu.txt (Rob Herring) > > Changes in v4: > - Move schema up by one level (Rob Herring) > - Add patternProperties for mdp node (Rob Herring) > - Corrected description of some properties (Rob Herring) > > Changes in v5: > - Correct the indentation (Rob Herring) > - Remove unnecessary description from properties (Rob Herring) > - Correct the number of interconnect entries (Rob Herring) > - Add interconnect names for sc7180 (Rob Herring) > - Add description for ports (Rob Herring) > - Remove common properties (Rob Herring) > - Add unevalutatedProperties (Rob Herring) > - Reference existing dsi controller yaml in the common > dsi controller file (Rob Herring) > - Correct the description of clock names to include only the > clocks that are required (Rob Herring) > - Remove properties which are already covered under the common > binding (Rob Herring) > - Add dsi phy supply nodes which are required for sc7180 and > sdm845 targets (Rob Herring) > - Add type ref for syscon-sfpb (Rob Herring) > > Changes in v6: > - Fixed errors during dt_binding_check (Rob Herring) > - Add maxItems for phys and phys-names (Rob Herring) > - Use unevaluatedProperties wherever required (Rob Herring) > - Removed interrupt controller from required properties for > dsi controller (Rob Herring) > - Add constraints for dsi-phy reg-names based on the compatible > phy version (Rob Herring) > - Add constraints for dsi-phy supply nodes based on the > compatible phy version (Rob Herring) > > Changes in v7: > - Add default value for qcom,mdss-mdp-transfer-time-us (Rob Herring) > - Modify the schema for data-lanes (Rob Herring) > - Split the phy schema into separate schemas based on > the phy version (Rob Herring) > > Changes in v8: > - Resolve merge conflicts with latest dsi.txt file > - Include dp yaml change also in the same series > > Changes in v9: > - Combine target specific dsi controller yaml files > to a single yaml file (Rob Herring) > - Combine target specific dsi phy yaml files into a > single yaml file (Rob Herring) > - Use unevaluatedProperties and additionalProperties > wherever required > - Remove duplicate properties from common yaml files > > Changes in v10: > - Split the patch into separate patches for DPU, DSI and > PHY (Stephen Boyd) > - Drop unnecessary fullstop (Stephen Boyd) > - Add newline whereever required (Stephen Boyd) > - Add description for clock used (Stephen Boyd) > - Modify the description for interconnect entries (Stephen Boyd) > - Drop assigned clock entries as it a generic property (Stephen Boyd) > - Correct the definition for interrupts (Stephen Boyd) > - Drop clock names from required properties (Stephen Boyd) > - Drop labels for display nodes from example (Stephen Boyd) > - Drop flags from interrupts entries (Stephen Boyd) > > Changes in v11: > - Drop maxItems for clocks (Stephen Boyd) > > Changes in v12: > - Add description for register property (Stephen Boyd) > - Add maxItems for interrupts (Stephen Boyd) > - Add description for iommus property (Stephen Boyd) > - Add description for interconnects (Stephen Boyd) > - Change display node name to display_controller (Stephen Boyd) > > Changes in v13: > - Add maxItems for reg property (Stephen Boyd) > - Add ranges property in example (Stephen Boyd) > - Modify description for iommus property (Stephen Boyd) > - Add Dp bindings for ports in the same patch (Stephen Boyd) > - Remove soc from examples and change address and size cells > accordingly (Stephen Boyd) > - Add reference for ports > > Changes in v14: > - Modify title for SC7180 and SDM845 yaml files (Stephen Boyd) > - Add required list for display-controller node (Stephen Boyd) > > Changes in v16: > - Add reference for port (Rob Herring) > - Make additionalProperties as false (Rob Herring) > --- > .../bindings/display/msm/dpu-sc7180.yaml | 228 +++++++++++++++++++++ > .../bindings/display/msm/dpu-sdm845.yaml | 212 +++++++++++++++++++ > .../devicetree/bindings/display/msm/dpu.txt | 141 ------------- > 3 files changed, 440 insertions(+), 141 deletions(-) > create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml > create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml > delete mode 100644 Documentation/devicetree/bindings/display/msm/dpu.txt > Please add Acked-by/Reviewed-by tags when posting new versions. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for acks received on the version they apply. If a tag was not added on purpose, please state why and what changed.
Quoting Krishna Manikandan (2021-05-21 03:27:21) > MSM Mobile Display Subsystem (MDSS) encapsulates sub-blocks > like DPU display controller, DSI etc. Add YAML schema > for DPU device tree bindings. > > Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org> > > Changes in v2: > - Changed dpu to DPU (Sam Ravnborg) > - Fixed indentation issues (Sam Ravnborg) > - Added empty line between different properties (Sam Ravnborg) > - Replaced reference txt files with their corresponding > yaml files (Sam Ravnborg) > - Modified the file to use "|" only when it is > necessary (Sam Ravnborg) > > Changes in v3: > - Corrected the license used (Rob Herring) > - Added maxItems for properties (Rob Herring) > - Dropped generic descriptions (Rob Herring) > - Added ranges property (Rob Herring) > - Corrected the indendation (Rob Herring) > - Added additionalProperties (Rob Herring) > - Split dsi file into two, one for dsi controller > and another one for dsi phy per target (Rob Herring) > - Corrected description for pinctrl-names (Rob Herring) > - Corrected the examples used in yaml file (Rob Herring) > - Delete dsi.txt and dpu.txt (Rob Herring) > > Changes in v4: > - Move schema up by one level (Rob Herring) > - Add patternProperties for mdp node (Rob Herring) > - Corrected description of some properties (Rob Herring) > > Changes in v5: > - Correct the indentation (Rob Herring) > - Remove unnecessary description from properties (Rob Herring) > - Correct the number of interconnect entries (Rob Herring) > - Add interconnect names for sc7180 (Rob Herring) > - Add description for ports (Rob Herring) > - Remove common properties (Rob Herring) > - Add unevalutatedProperties (Rob Herring) > - Reference existing dsi controller yaml in the common > dsi controller file (Rob Herring) > - Correct the description of clock names to include only the > clocks that are required (Rob Herring) > - Remove properties which are already covered under the common > binding (Rob Herring) > - Add dsi phy supply nodes which are required for sc7180 and > sdm845 targets (Rob Herring) > - Add type ref for syscon-sfpb (Rob Herring) > > Changes in v6: > - Fixed errors during dt_binding_check (Rob Herring) > - Add maxItems for phys and phys-names (Rob Herring) > - Use unevaluatedProperties wherever required (Rob Herring) > - Removed interrupt controller from required properties for > dsi controller (Rob Herring) > - Add constraints for dsi-phy reg-names based on the compatible > phy version (Rob Herring) > - Add constraints for dsi-phy supply nodes based on the > compatible phy version (Rob Herring) > > Changes in v7: > - Add default value for qcom,mdss-mdp-transfer-time-us (Rob Herring) > - Modify the schema for data-lanes (Rob Herring) > - Split the phy schema into separate schemas based on > the phy version (Rob Herring) > > Changes in v8: > - Resolve merge conflicts with latest dsi.txt file > - Include dp yaml change also in the same series > > Changes in v9: > - Combine target specific dsi controller yaml files > to a single yaml file (Rob Herring) > - Combine target specific dsi phy yaml files into a > single yaml file (Rob Herring) > - Use unevaluatedProperties and additionalProperties > wherever required > - Remove duplicate properties from common yaml files > > Changes in v10: > - Split the patch into separate patches for DPU, DSI and > PHY (Stephen Boyd) > - Drop unnecessary fullstop (Stephen Boyd) > - Add newline whereever required (Stephen Boyd) > - Add description for clock used (Stephen Boyd) > - Modify the description for interconnect entries (Stephen Boyd) > - Drop assigned clock entries as it a generic property (Stephen Boyd) > - Correct the definition for interrupts (Stephen Boyd) > - Drop clock names from required properties (Stephen Boyd) > - Drop labels for display nodes from example (Stephen Boyd) > - Drop flags from interrupts entries (Stephen Boyd) > > Changes in v11: > - Drop maxItems for clocks (Stephen Boyd) > > Changes in v12: > - Add description for register property (Stephen Boyd) > - Add maxItems for interrupts (Stephen Boyd) > - Add description for iommus property (Stephen Boyd) > - Add description for interconnects (Stephen Boyd) > - Change display node name to display_controller (Stephen Boyd) > > Changes in v13: > - Add maxItems for reg property (Stephen Boyd) > - Add ranges property in example (Stephen Boyd) > - Modify description for iommus property (Stephen Boyd) > - Add Dp bindings for ports in the same patch (Stephen Boyd) > - Remove soc from examples and change address and size cells > accordingly (Stephen Boyd) > - Add reference for ports > > Changes in v14: > - Modify title for SC7180 and SDM845 yaml files (Stephen Boyd) > - Add required list for display-controller node (Stephen Boyd) > > Changes in v16: > - Add reference for port (Rob Herring) > - Make additionalProperties as false (Rob Herring) > --- Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Quoting Bjorn Andersson (2021-05-21 09:00:29) > On Fri 21 May 05:27 CDT 2021, Krishna Manikandan wrote: > > diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml > [..] > > + ports: > > + $ref: /schemas/graph.yaml#/properties/ports > > + description: | > > + Contains the list of output ports from DPU device. These ports > > + connect to interfaces that are external to the DPU hardware, > > + such as DSI, DP etc. Each output port contains an endpoint that > > + describes how it is connected to an external interface. > > + > > + properties: > > + port@0: > > + $ref: /schemas/graph.yaml#/properties/port > > + description: DPU_INTF1 (DSI1) > > + > > + port@2: > > + $ref: /schemas/graph.yaml#/properties/port > > + description: DPU_INTF0 (DP) > > Why is port@0 INTF1 and why is port@2 INTF0? In the binding you're > translating the two ports that are described are 0 and 1, representing > INTF1 and INTF2, or DSI1 and DSI2, respectively. > > Further more, I have a need for somehow describing the pairing of 4 DP > INTFs (INTF 0, 3, 4 and 5) and how they are connected to the 3+1 DP+eDP > controllers. > > Downstream this seems to be handled by adding cell-index to the DP > controllers and then matching that against the numbering in the driver's > INTF array. But rather than adding cell-index to map this, can't we > define that the port index is the INTF-number here? > > > This would obviously break compatibility with existing DTBs, but we > could start by doing it selectively for the new compatibles, fix up the > existing dts files and then drop the selective application after 1 or 2 > LTS releases. I requested that the existing DT not change a while ago when the DP interface was being added to this binding. Is it possible to figure out what interface it is that the port is for from the binding? It feels like the problem is that the driver wants to look through the graph and make connectors for each one, but it doesn't know what type of connector to make.
On Fri 21 May 15:51 CDT 2021, Stephen Boyd wrote: > Quoting Bjorn Andersson (2021-05-21 09:00:29) > > On Fri 21 May 05:27 CDT 2021, Krishna Manikandan wrote: > > > diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml > > [..] > > > + ports: > > > + $ref: /schemas/graph.yaml#/properties/ports > > > + description: | > > > + Contains the list of output ports from DPU device. These ports > > > + connect to interfaces that are external to the DPU hardware, > > > + such as DSI, DP etc. Each output port contains an endpoint that > > > + describes how it is connected to an external interface. > > > + > > > + properties: > > > + port@0: > > > + $ref: /schemas/graph.yaml#/properties/port > > > + description: DPU_INTF1 (DSI1) > > > + > > > + port@2: > > > + $ref: /schemas/graph.yaml#/properties/port > > > + description: DPU_INTF0 (DP) > > > > Why is port@0 INTF1 and why is port@2 INTF0? In the binding you're > > translating the two ports that are described are 0 and 1, representing > > INTF1 and INTF2, or DSI1 and DSI2, respectively. > > > > Further more, I have a need for somehow describing the pairing of 4 DP > > INTFs (INTF 0, 3, 4 and 5) and how they are connected to the 3+1 DP+eDP > > controllers. > > > > Downstream this seems to be handled by adding cell-index to the DP > > controllers and then matching that against the numbering in the driver's > > INTF array. But rather than adding cell-index to map this, can't we > > define that the port index is the INTF-number here? > > > > > > This would obviously break compatibility with existing DTBs, but we > > could start by doing it selectively for the new compatibles, fix up the > > existing dts files and then drop the selective application after 1 or 2 > > LTS releases. > > I requested that the existing DT not change a while ago when the DP > interface was being added to this binding. Is it possible to figure out > what interface it is that the port is for from the binding? It feels > like the problem is that the driver wants to look through the graph and > make connectors for each one, but it doesn't know what type of connector > to make. Today there's a single priv->dp pointer which is initialized as the one and only displayport controller component is bound. _dpu_kms_set_encoder_mode() has no knowledge about which interface this single controller is attached to, so dpu_encoder_setup_display() will always just pick INTF_DP index 0. So in its current form if your single DP port isn't sitting on the platform's first DP INTF you need to hack dpu_hw_catalog and remove the previous ones. But with my desire to reuse the DP controller code for eDP, and the fact that I have 3 DP controllers in my laptop we need something more. But after considering my proposal further I realized that it is too static for my use case anyway. SC8180x has INTF 0 and 4 are wired to the DP controllers associated with the two primary USB ports and then INTF 3 is dynamically switched between them for MST purposes. So using port indices would prevent me from doing this dynamic dance. Regards, Bjorn
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml new file mode 100644 index 0000000..12a86b1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml @@ -0,0 +1,228 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-sc7180.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for SC7180 target + +maintainers: + - Krishna Manikandan <mkrishn@codeaurora.org> + +description: | + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS and DPU are mentioned for SC7180 target. + +properties: + compatible: + items: + - const: qcom,sc7180-mdss + + reg: + maxItems: 1 + + reg-names: + const: mdss + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock from dispcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#address-cells": true + + "#size-cells": true + + "#interrupt-cells": + const: 1 + + iommus: + items: + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 + + ranges: true + + interconnects: + items: + - description: Interconnect path specifying the port ids for data bus + + interconnect-names: + const: mdp0-mem + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + description: Node containing the properties of DPU. + + properties: + compatible: + items: + - const: qcom,sc7180-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi clock + - description: Display ahb clock + - description: Display rotator clock + - description: Display lut clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: bus + - const: iface + - const: rot + - const: lut + - const: core + - const: vsync + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + operating-points-v2: true + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. Each output port contains an endpoint that + describes how it is connected to an external interface. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF1 (DSI1) + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF0 (DP) + + required: + - port@0 + + required: + - compatible + - reg + - reg-names + - clocks + - interrupts + - power-domains + - operating-points-v2 + - ports + +required: + - compatible + - reg + - reg-names + - power-domains + - clocks + - interrupts + - interrupt-controller + - iommus + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc7180.h> + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sdm845.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sc7180-mdss"; + reg = <0xae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "ahb", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; + interconnect-names = "mdp0-mem"; + + iommus = <&apps_smmu 0x800 0x2>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sc7180-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "rot", "lut", "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml new file mode 100644 index 0000000..b4ea7c9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml @@ -0,0 +1,212 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-sdm845.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for SDM845 target + +maintainers: + - Krishna Manikandan <mkrishn@codeaurora.org> + +description: | + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS and DPU are mentioned for SDM845 target. + +properties: + compatible: + items: + - const: qcom,sdm845-mdss + + reg: + maxItems: 1 + + reg-names: + const: mdss + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AXI clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#address-cells": true + + "#size-cells": true + + "#interrupt-cells": + const: 1 + + iommus: + items: + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1 + + ranges: true + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + description: Node containing the properties of DPU. + + properties: + compatible: + items: + - const: qcom,sdm845-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display ahb clock + - description: Display axi clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + - const: vsync + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + operating-points-v2: true + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. Each output port contains an endpoint that + describes how it is connected to an external interface. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF1 (DSI1) + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF2 (DSI2) + + required: + - port@0 + - port@1 + + required: + - compatible + - reg + - reg-names + - clocks + - interrupts + - power-domains + - operating-points-v2 + - ports + +required: + - compatible + - reg + - reg-names + - power-domains + - clocks + - interrupts + - interrupt-controller + - iommus + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sdm845-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x880 0x8>, + <&apps_smmu 0xc80 0x8>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sdm845-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt deleted file mode 100644 index 586e6ea..0000000 --- a/Documentation/devicetree/bindings/display/msm/dpu.txt +++ /dev/null @@ -1,141 +0,0 @@ -Qualcomm Technologies, Inc. DPU KMS - -Description: - -Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates -sub-blocks like DPU display controller, DSI and DP interfaces etc. -The DPU display controller is found in SDM845 SoC. - -MDSS: -Required properties: -- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss" -- reg: physical base address and length of controller's registers. -- reg-names: register region names. The following region is required: - * "mdss" -- power-domains: a power domain consumer specifier according to - Documentation/devicetree/bindings/power/power_domain.txt -- clocks: list of clock specifiers for clocks needed by the device. -- clock-names: device clock names, must be in same order as clocks property. - The following clocks are required: - * "iface" - * "bus" - * "core" -- interrupts: interrupt signal from MDSS. -- interrupt-controller: identifies the node as an interrupt controller. -- #interrupt-cells: specifies the number of cells needed to encode an interrupt - source, should be 1. -- iommus: phandle of iommu device node. -- #address-cells: number of address cells for the MDSS children. Should be 1. -- #size-cells: Should be 1. -- ranges: parent bus address space is the same as the child bus address space. -- interconnects : interconnect path specifier for MDSS according to - Documentation/devicetree/bindings/interconnect/interconnect.txt. Should be - 2 paths corresponding to 2 AXI ports. -- interconnect-names : MDSS will have 2 port names to differentiate between the - 2 interconnect paths defined with interconnect specifier. - -Optional properties: -- assigned-clocks: list of clock specifiers for clocks needing rate assignment -- assigned-clock-rates: list of clock frequencies sorted in the same order as - the assigned-clocks property. - -MDP: -Required properties: -- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu" -- reg: physical base address and length of controller's registers. -- reg-names : register region names. The following region is required: - * "mdp" - * "vbif" -- clocks: list of clock specifiers for clocks needed by the device. -- clock-names: device clock names, must be in same order as clocks property. - The following clocks are required. - * "bus" - * "iface" - * "core" - * "vsync" -- interrupts: interrupt line from DPU to MDSS. -- ports: contains the list of output ports from DPU device. These ports connect - to interfaces that are external to the DPU hardware, such as DSI, DP etc. - - Each output port contains an endpoint that describes how it is connected to an - external interface. These are described by the standard properties documented - here: - Documentation/devicetree/bindings/graph.txt - Documentation/devicetree/bindings/media/video-interfaces.txt - - Port 0 -> DPU_INTF1 (DSI1) - Port 1 -> DPU_INTF2 (DSI2) - -Optional properties: -- assigned-clocks: list of clock specifiers for clocks needing rate assignment -- assigned-clock-rates: list of clock frequencies sorted in the same order as - the assigned-clocks property. - -Example: - - mdss: mdss@ae00000 { - compatible = "qcom,sdm845-mdss"; - reg = <0xae00000 0x1000>; - reg-names = "mdss"; - - power-domains = <&clock_dispcc 0>; - - clocks = <&gcc GCC_DISP_AHB_CLK>, <&gcc GCC_DISP_AXI_CLK>, - <&clock_dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "bus", "core"; - - assigned-clocks = <&clock_dispcc DISP_CC_MDSS_MDP_CLK>; - assigned-clock-rates = <300000000>; - - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; - - interconnects = <&rsc_hlos MASTER_MDP0 &rsc_hlos SLAVE_EBI1>, - <&rsc_hlos MASTER_MDP1 &rsc_hlos SLAVE_EBI1>; - - interconnect-names = "mdp0-mem", "mdp1-mem"; - - iommus = <&apps_iommu 0>; - - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0xae00000 0xb2008>; - - mdss_mdp: mdp@ae01000 { - compatible = "qcom,sdm845-dpu"; - reg = <0 0x1000 0x8f000>, <0 0xb0000 0x2008>; - reg-names = "mdp", "vbif"; - - clocks = <&clock_dispcc DISP_CC_MDSS_AHB_CLK>, - <&clock_dispcc DISP_CC_MDSS_AXI_CLK>, - <&clock_dispcc DISP_CC_MDSS_MDP_CLK>, - <&clock_dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "iface", "bus", "core", "vsync"; - - assigned-clocks = <&clock_dispcc DISP_CC_MDSS_MDP_CLK>, - <&clock_dispcc DISP_CC_MDSS_VSYNC_CLK>; - assigned-clock-rates = <0 0 300000000 19200000>; - - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - - port@1 { - reg = <1>; - dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; - }; - }; - }; - }; - };
MSM Mobile Display Subsystem (MDSS) encapsulates sub-blocks like DPU display controller, DSI etc. Add YAML schema for DPU device tree bindings. Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org> Changes in v2: - Changed dpu to DPU (Sam Ravnborg) - Fixed indentation issues (Sam Ravnborg) - Added empty line between different properties (Sam Ravnborg) - Replaced reference txt files with their corresponding yaml files (Sam Ravnborg) - Modified the file to use "|" only when it is necessary (Sam Ravnborg) Changes in v3: - Corrected the license used (Rob Herring) - Added maxItems for properties (Rob Herring) - Dropped generic descriptions (Rob Herring) - Added ranges property (Rob Herring) - Corrected the indendation (Rob Herring) - Added additionalProperties (Rob Herring) - Split dsi file into two, one for dsi controller and another one for dsi phy per target (Rob Herring) - Corrected description for pinctrl-names (Rob Herring) - Corrected the examples used in yaml file (Rob Herring) - Delete dsi.txt and dpu.txt (Rob Herring) Changes in v4: - Move schema up by one level (Rob Herring) - Add patternProperties for mdp node (Rob Herring) - Corrected description of some properties (Rob Herring) Changes in v5: - Correct the indentation (Rob Herring) - Remove unnecessary description from properties (Rob Herring) - Correct the number of interconnect entries (Rob Herring) - Add interconnect names for sc7180 (Rob Herring) - Add description for ports (Rob Herring) - Remove common properties (Rob Herring) - Add unevalutatedProperties (Rob Herring) - Reference existing dsi controller yaml in the common dsi controller file (Rob Herring) - Correct the description of clock names to include only the clocks that are required (Rob Herring) - Remove properties which are already covered under the common binding (Rob Herring) - Add dsi phy supply nodes which are required for sc7180 and sdm845 targets (Rob Herring) - Add type ref for syscon-sfpb (Rob Herring) Changes in v6: - Fixed errors during dt_binding_check (Rob Herring) - Add maxItems for phys and phys-names (Rob Herring) - Use unevaluatedProperties wherever required (Rob Herring) - Removed interrupt controller from required properties for dsi controller (Rob Herring) - Add constraints for dsi-phy reg-names based on the compatible phy version (Rob Herring) - Add constraints for dsi-phy supply nodes based on the compatible phy version (Rob Herring) Changes in v7: - Add default value for qcom,mdss-mdp-transfer-time-us (Rob Herring) - Modify the schema for data-lanes (Rob Herring) - Split the phy schema into separate schemas based on the phy version (Rob Herring) Changes in v8: - Resolve merge conflicts with latest dsi.txt file - Include dp yaml change also in the same series Changes in v9: - Combine target specific dsi controller yaml files to a single yaml file (Rob Herring) - Combine target specific dsi phy yaml files into a single yaml file (Rob Herring) - Use unevaluatedProperties and additionalProperties wherever required - Remove duplicate properties from common yaml files Changes in v10: - Split the patch into separate patches for DPU, DSI and PHY (Stephen Boyd) - Drop unnecessary fullstop (Stephen Boyd) - Add newline whereever required (Stephen Boyd) - Add description for clock used (Stephen Boyd) - Modify the description for interconnect entries (Stephen Boyd) - Drop assigned clock entries as it a generic property (Stephen Boyd) - Correct the definition for interrupts (Stephen Boyd) - Drop clock names from required properties (Stephen Boyd) - Drop labels for display nodes from example (Stephen Boyd) - Drop flags from interrupts entries (Stephen Boyd) Changes in v11: - Drop maxItems for clocks (Stephen Boyd) Changes in v12: - Add description for register property (Stephen Boyd) - Add maxItems for interrupts (Stephen Boyd) - Add description for iommus property (Stephen Boyd) - Add description for interconnects (Stephen Boyd) - Change display node name to display_controller (Stephen Boyd) Changes in v13: - Add maxItems for reg property (Stephen Boyd) - Add ranges property in example (Stephen Boyd) - Modify description for iommus property (Stephen Boyd) - Add Dp bindings for ports in the same patch (Stephen Boyd) - Remove soc from examples and change address and size cells accordingly (Stephen Boyd) - Add reference for ports Changes in v14: - Modify title for SC7180 and SDM845 yaml files (Stephen Boyd) - Add required list for display-controller node (Stephen Boyd) Changes in v16: - Add reference for port (Rob Herring) - Make additionalProperties as false (Rob Herring) --- .../bindings/display/msm/dpu-sc7180.yaml | 228 +++++++++++++++++++++ .../bindings/display/msm/dpu-sdm845.yaml | 212 +++++++++++++++++++ .../devicetree/bindings/display/msm/dpu.txt | 141 ------------- 3 files changed, 440 insertions(+), 141 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml delete mode 100644 Documentation/devicetree/bindings/display/msm/dpu.txt