| Message ID | 20210509022607.17534-1-shawn.guo@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v3] iommu/arm-smmu-qcom: hook up qcom_smmu_impl for ACPI boot | expand |
On Sun, May 09, 2021 at 10:26:07AM +0800, Shawn Guo wrote: > The hookup with qcom_smmu_impl is required to do ACPI boot on SC8180X > based devices like Lenovo Flex 5G laptop and Microsoft Surface Pro X. > Define acpi_platform_list for these platforms and match them using > acpi_match_platform_list() call, and create qcom_smmu_impl accordingly. > > (np == NULL) is used to check ACPI boot, because fwnode of SMMU device > is a static allocation and thus helpers like has_acpi_companion() don't > work here. > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> > --- > Changes for v3: > - Call acpi_match_platform_list() to match platform in qcom smmu > driver rather than IORT code. Hi Robin, How does this version look? Shawn > > Changes for v2: > - Rather than using asl_compiler_id in IORT table, follow suggestion > from Robin Murphy to use acpi_match_platform_list() to match platform. > > drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c > index 98b3a1c2a181..f7e187f3fa66 100644 > --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c > +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c > @@ -3,6 +3,7 @@ > * Copyright (c) 2019, The Linux Foundation. All rights reserved. > */ > > +#include <linux/acpi.h> > #include <linux/adreno-smmu-priv.h> > #include <linux/of_device.h> > #include <linux/qcom_scm.h> > @@ -339,10 +340,22 @@ static const struct of_device_id __maybe_unused qcom_smmu_impl_of_match[] = { > { } > }; > > +static struct acpi_platform_list qcom_acpi_platlist[] = { > + { "LENOVO", "CB-01 ", 0x8180, ACPI_SIG_IORT, equal, "QCOM SMMU" }, > + { "QCOM ", "QCOMEDK2", 0x8180, ACPI_SIG_IORT, equal, "QCOM SMMU" }, > + { } > +}; > + > struct arm_smmu_device *qcom_smmu_impl_init(struct arm_smmu_device *smmu) > { > const struct device_node *np = smmu->dev->of_node; > > + if (np == NULL) { > + /* Match platform for ACPI boot */ > + if (acpi_match_platform_list(qcom_acpi_platlist) >= 0) > + return qcom_smmu_create(smmu, &qcom_smmu_impl); > + } > + > if (of_match_node(qcom_smmu_impl_of_match, np)) > return qcom_smmu_create(smmu, &qcom_smmu_impl); > > -- > 2.17.1 >
On 2021-05-23 07:05, Shawn Guo wrote: > On Sun, May 09, 2021 at 10:26:07AM +0800, Shawn Guo wrote: >> The hookup with qcom_smmu_impl is required to do ACPI boot on SC8180X >> based devices like Lenovo Flex 5G laptop and Microsoft Surface Pro X. >> Define acpi_platform_list for these platforms and match them using >> acpi_match_platform_list() call, and create qcom_smmu_impl accordingly. >> >> (np == NULL) is used to check ACPI boot, because fwnode of SMMU device >> is a static allocation and thus helpers like has_acpi_companion() don't >> work here. >> >> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> >> --- >> Changes for v3: >> - Call acpi_match_platform_list() to match platform in qcom smmu >> driver rather than IORT code. > > Hi Robin, > > How does this version look? So good that I glanced at it, thought "nice!", then having no remaining concerns promptly moved on to something else forgot about it. Sorry about that! Reviewed-by: Robin Murphy <robin.murphy@arm.com> Cheers, Robin. > Shawn > >> >> Changes for v2: >> - Rather than using asl_compiler_id in IORT table, follow suggestion >> from Robin Murphy to use acpi_match_platform_list() to match platform. >> >> drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 13 +++++++++++++ >> 1 file changed, 13 insertions(+) >> >> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c >> index 98b3a1c2a181..f7e187f3fa66 100644 >> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c >> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c >> @@ -3,6 +3,7 @@ >> * Copyright (c) 2019, The Linux Foundation. All rights reserved. >> */ >> >> +#include <linux/acpi.h> >> #include <linux/adreno-smmu-priv.h> >> #include <linux/of_device.h> >> #include <linux/qcom_scm.h> >> @@ -339,10 +340,22 @@ static const struct of_device_id __maybe_unused qcom_smmu_impl_of_match[] = { >> { } >> }; >> >> +static struct acpi_platform_list qcom_acpi_platlist[] = { >> + { "LENOVO", "CB-01 ", 0x8180, ACPI_SIG_IORT, equal, "QCOM SMMU" }, >> + { "QCOM ", "QCOMEDK2", 0x8180, ACPI_SIG_IORT, equal, "QCOM SMMU" }, >> + { } >> +}; >> + >> struct arm_smmu_device *qcom_smmu_impl_init(struct arm_smmu_device *smmu) >> { >> const struct device_node *np = smmu->dev->of_node; >> >> + if (np == NULL) { >> + /* Match platform for ACPI boot */ >> + if (acpi_match_platform_list(qcom_acpi_platlist) >= 0) >> + return qcom_smmu_create(smmu, &qcom_smmu_impl); >> + } >> + >> if (of_match_node(qcom_smmu_impl_of_match, np)) >> return qcom_smmu_create(smmu, &qcom_smmu_impl); >> >> -- >> 2.17.1 >>
On Sat 08 May 21:26 CDT 2021, Shawn Guo wrote: > The hookup with qcom_smmu_impl is required to do ACPI boot on SC8180X > based devices like Lenovo Flex 5G laptop and Microsoft Surface Pro X. > Define acpi_platform_list for these platforms and match them using > acpi_match_platform_list() call, and create qcom_smmu_impl accordingly. > > (np == NULL) is used to check ACPI boot, because fwnode of SMMU device > is a static allocation and thus helpers like has_acpi_companion() don't > work here. > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> > --- > Changes for v3: > - Call acpi_match_platform_list() to match platform in qcom smmu > driver rather than IORT code. > > Changes for v2: > - Rather than using asl_compiler_id in IORT table, follow suggestion > from Robin Murphy to use acpi_match_platform_list() to match platform. > > drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c > index 98b3a1c2a181..f7e187f3fa66 100644 > --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c > +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c > @@ -3,6 +3,7 @@ > * Copyright (c) 2019, The Linux Foundation. All rights reserved. > */ > > +#include <linux/acpi.h> > #include <linux/adreno-smmu-priv.h> > #include <linux/of_device.h> > #include <linux/qcom_scm.h> > @@ -339,10 +340,22 @@ static const struct of_device_id __maybe_unused qcom_smmu_impl_of_match[] = { > { } > }; > > +static struct acpi_platform_list qcom_acpi_platlist[] = { > + { "LENOVO", "CB-01 ", 0x8180, ACPI_SIG_IORT, equal, "QCOM SMMU" }, > + { "QCOM ", "QCOMEDK2", 0x8180, ACPI_SIG_IORT, equal, "QCOM SMMU" }, > + { } > +}; > + > struct arm_smmu_device *qcom_smmu_impl_init(struct arm_smmu_device *smmu) > { > const struct device_node *np = smmu->dev->of_node; > > + if (np == NULL) { > + /* Match platform for ACPI boot */ > + if (acpi_match_platform_list(qcom_acpi_platlist) >= 0) > + return qcom_smmu_create(smmu, &qcom_smmu_impl); > + } > + > if (of_match_node(qcom_smmu_impl_of_match, np)) > return qcom_smmu_create(smmu, &qcom_smmu_impl); > > -- > 2.17.1 >
On Sun, 9 May 2021 10:26:07 +0800, Shawn Guo wrote: > The hookup with qcom_smmu_impl is required to do ACPI boot on SC8180X > based devices like Lenovo Flex 5G laptop and Microsoft Surface Pro X. > Define acpi_platform_list for these platforms and match them using > acpi_match_platform_list() call, and create qcom_smmu_impl accordingly. > > (np == NULL) is used to check ACPI boot, because fwnode of SMMU device > is a static allocation and thus helpers like has_acpi_companion() don't > work here. Applied to will (for-joerg/arm-smmu/updates), thanks! [1/1] iommu/arm-smmu-qcom: hook up qcom_smmu_impl for ACPI boot https://git.kernel.org/will/c/a51627c5df58 Cheers,
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c index 98b3a1c2a181..f7e187f3fa66 100644 --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c @@ -3,6 +3,7 @@ * Copyright (c) 2019, The Linux Foundation. All rights reserved. */ +#include <linux/acpi.h> #include <linux/adreno-smmu-priv.h> #include <linux/of_device.h> #include <linux/qcom_scm.h> @@ -339,10 +340,22 @@ static const struct of_device_id __maybe_unused qcom_smmu_impl_of_match[] = { { } }; +static struct acpi_platform_list qcom_acpi_platlist[] = { + { "LENOVO", "CB-01 ", 0x8180, ACPI_SIG_IORT, equal, "QCOM SMMU" }, + { "QCOM ", "QCOMEDK2", 0x8180, ACPI_SIG_IORT, equal, "QCOM SMMU" }, + { } +}; + struct arm_smmu_device *qcom_smmu_impl_init(struct arm_smmu_device *smmu) { const struct device_node *np = smmu->dev->of_node; + if (np == NULL) { + /* Match platform for ACPI boot */ + if (acpi_match_platform_list(qcom_acpi_platlist) >= 0) + return qcom_smmu_create(smmu, &qcom_smmu_impl); + } + if (of_match_node(qcom_smmu_impl_of_match, np)) return qcom_smmu_create(smmu, &qcom_smmu_impl);
The hookup with qcom_smmu_impl is required to do ACPI boot on SC8180X based devices like Lenovo Flex 5G laptop and Microsoft Surface Pro X. Define acpi_platform_list for these platforms and match them using acpi_match_platform_list() call, and create qcom_smmu_impl accordingly. (np == NULL) is used to check ACPI boot, because fwnode of SMMU device is a static allocation and thus helpers like has_acpi_companion() don't work here. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- Changes for v3: - Call acpi_match_platform_list() to match platform in qcom smmu driver rather than IORT code. Changes for v2: - Rather than using asl_compiler_id in IORT table, follow suggestion from Robin Murphy to use acpi_match_platform_list() to match platform. drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)