| Message ID | 20210526132041.6104-1-grygorii.strashko@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [next] arm64: dts: ti: k3-am654x/j721e/j7200-common-proc-board: fix MCU_RGMII1_TXC direction | expand |
On 5/26/21 6:50 PM, Grygorii Strashko wrote: > The MCU RGMII MCU_RGMII1_TXC pin is defined as input by mistake, although > this does not make any difference functionality wise it's better to update > to avoid confusion. > > Hence fix MCU RGMII MCU_RGMII1_TXC pin pinmux definitions to be an output > in K3 am654x/j721e/j7200 board files. > > Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> > --- Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> > arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 2 +- > arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 2 +- > arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 2 +- > 3 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts > index eddb2ffb93ca..97c344088483 100644 > --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts > +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts > @@ -136,7 +136,7 @@ > AM65X_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */ > AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */ > AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */ > - AM65X_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* (N1) MCU_RGMII1_TXC */ > + AM65X_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* (N1) MCU_RGMII1_TXC */ > AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */ > >; > }; > diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts > index bedd01b7a32c..d14f3c18b65f 100644 > --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts > +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts > @@ -90,7 +90,7 @@ > J721E_WKUP_IOPAD(0x008c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */ > J721E_WKUP_IOPAD(0x0090, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */ > J721E_WKUP_IOPAD(0x0094, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */ > - J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_TXC */ > + J721E_WKUP_IOPAD(0x0080, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */ > J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RXC */ > >; > }; > diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts > index 60764366e22b..351bb84db65b 100644 > --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts > +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts > @@ -237,7 +237,7 @@ > J721E_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */ > J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */ > J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */ > - J721E_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* MCU_RGMII1_TXC */ > + J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */ > J721E_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* MCU_RGMII1_RXC */ > >; > }; >
On Wed, 26 May 2021 16:20:41 +0300, Grygorii Strashko wrote: > The MCU RGMII MCU_RGMII1_TXC pin is defined as input by mistake, although > this does not make any difference functionality wise it's better to update > to avoid confusion. > > Hence fix MCU RGMII MCU_RGMII1_TXC pin pinmux definitions to be an output > in K3 am654x/j721e/j7200 board files. Hi Grygorii Strashko, I have applied the following to branch ti-k3-dts-next on [1]. Thank you! [1/1] arm64: dts: ti: k3-am654x/j721e/j7200-common-proc-board: fix MCU_RGMII1_TXC direction commit: 69db725cdb2b803af67897a08ea54467d11f6020 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. [1] git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index eddb2ffb93ca..97c344088483 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -136,7 +136,7 @@ AM65X_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */ AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */ AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */ - AM65X_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* (N1) MCU_RGMII1_TXC */ + AM65X_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* (N1) MCU_RGMII1_TXC */ AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */ >; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index bedd01b7a32c..d14f3c18b65f 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -90,7 +90,7 @@ J721E_WKUP_IOPAD(0x008c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */ J721E_WKUP_IOPAD(0x0090, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */ J721E_WKUP_IOPAD(0x0094, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */ - J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_TXC */ + J721E_WKUP_IOPAD(0x0080, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */ J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RXC */ >; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 60764366e22b..351bb84db65b 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -237,7 +237,7 @@ J721E_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */ J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */ J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */ - J721E_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* MCU_RGMII1_TXC */ + J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */ J721E_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* MCU_RGMII1_RXC */ >; };
The MCU RGMII MCU_RGMII1_TXC pin is defined as input by mistake, although this does not make any difference functionality wise it's better to update to avoid confusion. Hence fix MCU RGMII MCU_RGMII1_TXC pin pinmux definitions to be an output in K3 am654x/j721e/j7200 board files. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 2 +- arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 2 +- arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)