Message ID | 20210517095513.850-12-xieyongji@bytedance.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Introduce VDUSE - vDPA Device in Userspace | expand |
On Mon, May 17, 2021 at 05:55:12PM +0800, Xie Yongji wrote: > + case VDUSE_IOTLB_GET_FD: { > + struct vduse_iotlb_entry entry; > + struct vhost_iotlb_map *map; > + struct vdpa_map_file *map_file; > + struct vduse_iova_domain *domain = dev->domain; > + struct file *f = NULL; > + > + ret = -EFAULT; > + if (copy_from_user(&entry, argp, sizeof(entry))) > + break; return -EFAULT; surely? > + > + ret = -EINVAL; > + if (entry.start > entry.last) > + break; ... and similar here, etc. > + spin_lock(&domain->iotlb_lock); > + map = vhost_iotlb_itree_first(domain->iotlb, > + entry.start, entry.last); > + if (map) { > + map_file = (struct vdpa_map_file *)map->opaque; > + f = get_file(map_file->file); > + entry.offset = map_file->offset; > + entry.start = map->start; > + entry.last = map->last; > + entry.perm = map->perm; > + } > + spin_unlock(&domain->iotlb_lock); > + ret = -EINVAL; > + if (!f) > + break; > + > + ret = -EFAULT; > + if (copy_to_user(argp, &entry, sizeof(entry))) { > + fput(f); > + break; > + } > + ret = receive_fd(f, perm_to_file_flags(entry.perm)); > + fput(f); > + break; IDGI. The main difference between receive_fd() and plain old get_unused_fd_flags() + fd_install() is __receive_sock() call. Which does nothing whatsoever in case of non-sockets. Can you get a socket here? IOW, why bother with that crap at all, nevermind exporting it?
On Thu, May 20, 2021 at 2:28 PM Al Viro <viro@zeniv.linux.org.uk> wrote: > > On Mon, May 17, 2021 at 05:55:12PM +0800, Xie Yongji wrote: > > > + case VDUSE_IOTLB_GET_FD: { > > + struct vduse_iotlb_entry entry; > > + struct vhost_iotlb_map *map; > > + struct vdpa_map_file *map_file; > > + struct vduse_iova_domain *domain = dev->domain; > > + struct file *f = NULL; > > + > > + ret = -EFAULT; > > + if (copy_from_user(&entry, argp, sizeof(entry))) > > + break; > > return -EFAULT; > surely? > > + > > + ret = -EINVAL; > > + if (entry.start > entry.last) > > + break; > > ... and similar here, etc. > OK. > > + spin_lock(&domain->iotlb_lock); > > + map = vhost_iotlb_itree_first(domain->iotlb, > > + entry.start, entry.last); > > + if (map) { > > + map_file = (struct vdpa_map_file *)map->opaque; > > + f = get_file(map_file->file); > > + entry.offset = map_file->offset; > > + entry.start = map->start; > > + entry.last = map->last; > > + entry.perm = map->perm; > > + } > > + spin_unlock(&domain->iotlb_lock); > > + ret = -EINVAL; > > + if (!f) > > + break; > > + > > + ret = -EFAULT; > > + if (copy_to_user(argp, &entry, sizeof(entry))) { > > + fput(f); > > + break; > > + } > > + ret = receive_fd(f, perm_to_file_flags(entry.perm)); > > + fput(f); > > + break; > > IDGI. The main difference between receive_fd() and plain old > get_unused_fd_flags() + fd_install() is __receive_sock() call. > Which does nothing whatsoever in case of non-sockets. Can you > get a socket here? > Actually what I want here is the security_file_receive() hook in receive_fd(). Thanks, Yongji
在 2021/5/17 下午5:55, Xie Yongji 写道: > + > +static int vduse_dev_msg_sync(struct vduse_dev *dev, > + struct vduse_dev_msg *msg) > +{ > + init_waitqueue_head(&msg->waitq); > + spin_lock(&dev->msg_lock); > + vduse_enqueue_msg(&dev->send_list, msg); > + wake_up(&dev->waitq); > + spin_unlock(&dev->msg_lock); > + wait_event_killable(msg->waitq, msg->completed); What happens if the userspace(malicous) doesn't give a response forever? It looks like a DOS. If yes, we need to consider a way to fix that. Thanks > + spin_lock(&dev->msg_lock); > + if (!msg->completed) { > + list_del(&msg->list); > + msg->resp.result = VDUSE_REQUEST_FAILED; > + } > + spin_unlock(&dev->msg_lock); > + > + return (msg->resp.result == VDUSE_REQUEST_OK) ? 0 : -1; > +}
On Thu, May 27, 2021 at 12:13 PM Jason Wang <jasowang@redhat.com> wrote: > > > 在 2021/5/17 下午5:55, Xie Yongji 写道: > > + > > +static int vduse_dev_msg_sync(struct vduse_dev *dev, > > + struct vduse_dev_msg *msg) > > +{ > > + init_waitqueue_head(&msg->waitq); > > + spin_lock(&dev->msg_lock); > > + vduse_enqueue_msg(&dev->send_list, msg); > > + wake_up(&dev->waitq); > > + spin_unlock(&dev->msg_lock); > > + wait_event_killable(msg->waitq, msg->completed); > > > What happens if the userspace(malicous) doesn't give a response forever? > > It looks like a DOS. If yes, we need to consider a way to fix that. > How about using wait_event_killable_timeout() instead? Thanks, Yongji
在 2021/5/27 下午12:57, Yongji Xie 写道: > On Thu, May 27, 2021 at 12:13 PM Jason Wang <jasowang@redhat.com> wrote: >> >> 在 2021/5/17 下午5:55, Xie Yongji 写道: >>> + >>> +static int vduse_dev_msg_sync(struct vduse_dev *dev, >>> + struct vduse_dev_msg *msg) >>> +{ >>> + init_waitqueue_head(&msg->waitq); >>> + spin_lock(&dev->msg_lock); >>> + vduse_enqueue_msg(&dev->send_list, msg); >>> + wake_up(&dev->waitq); >>> + spin_unlock(&dev->msg_lock); >>> + wait_event_killable(msg->waitq, msg->completed); >> >> What happens if the userspace(malicous) doesn't give a response forever? >> >> It looks like a DOS. If yes, we need to consider a way to fix that. >> > How about using wait_event_killable_timeout() instead? Probably, and then we need choose a suitable timeout and more important, need to report the failure to virtio. Thanks > > Thanks, > Yongji >
On Thu, May 27, 2021 at 1:00 PM Jason Wang <jasowang@redhat.com> wrote: > > > 在 2021/5/27 下午12:57, Yongji Xie 写道: > > On Thu, May 27, 2021 at 12:13 PM Jason Wang <jasowang@redhat.com> wrote: > >> > >> 在 2021/5/17 下午5:55, Xie Yongji 写道: > >>> + > >>> +static int vduse_dev_msg_sync(struct vduse_dev *dev, > >>> + struct vduse_dev_msg *msg) > >>> +{ > >>> + init_waitqueue_head(&msg->waitq); > >>> + spin_lock(&dev->msg_lock); > >>> + vduse_enqueue_msg(&dev->send_list, msg); > >>> + wake_up(&dev->waitq); > >>> + spin_unlock(&dev->msg_lock); > >>> + wait_event_killable(msg->waitq, msg->completed); > >> > >> What happens if the userspace(malicous) doesn't give a response forever? > >> > >> It looks like a DOS. If yes, we need to consider a way to fix that. > >> > > How about using wait_event_killable_timeout() instead? > > > Probably, and then we need choose a suitable timeout and more important, > need to report the failure to virtio. > Makes sense to me. But it looks like some vdpa_config_ops/virtio_config_ops such as set_status() didn't have a return value. Now I add a WARN_ON() for the failure. Do you mean we need to add some change for virtio core to handle the failure? Thanks, Yongji
在 2021/5/27 下午1:08, Yongji Xie 写道: > On Thu, May 27, 2021 at 1:00 PM Jason Wang <jasowang@redhat.com> wrote: >> >> 在 2021/5/27 下午12:57, Yongji Xie 写道: >>> On Thu, May 27, 2021 at 12:13 PM Jason Wang <jasowang@redhat.com> wrote: >>>> 在 2021/5/17 下午5:55, Xie Yongji 写道: >>>>> + >>>>> +static int vduse_dev_msg_sync(struct vduse_dev *dev, >>>>> + struct vduse_dev_msg *msg) >>>>> +{ >>>>> + init_waitqueue_head(&msg->waitq); >>>>> + spin_lock(&dev->msg_lock); >>>>> + vduse_enqueue_msg(&dev->send_list, msg); >>>>> + wake_up(&dev->waitq); >>>>> + spin_unlock(&dev->msg_lock); >>>>> + wait_event_killable(msg->waitq, msg->completed); >>>> What happens if the userspace(malicous) doesn't give a response forever? >>>> >>>> It looks like a DOS. If yes, we need to consider a way to fix that. >>>> >>> How about using wait_event_killable_timeout() instead? >> >> Probably, and then we need choose a suitable timeout and more important, >> need to report the failure to virtio. >> > Makes sense to me. But it looks like some > vdpa_config_ops/virtio_config_ops such as set_status() didn't have a > return value. Now I add a WARN_ON() for the failure. Do you mean we > need to add some change for virtio core to handle the failure? Maybe, but I'm not sure how hard we can do that. We had NEEDS_RESET but it looks we don't implement it. Or a rough idea is that maybe need some relaxing to be coupled loosely with userspace. E.g the device (control path) is implemented in the kernel but the datapath is implemented in the userspace like TUN/TAP. Thanks > > Thanks, > Yongji >
On Thu, May 27, 2021 at 1:40 PM Jason Wang <jasowang@redhat.com> wrote: > > > 在 2021/5/27 下午1:08, Yongji Xie 写道: > > On Thu, May 27, 2021 at 1:00 PM Jason Wang <jasowang@redhat.com> wrote: > >> > >> 在 2021/5/27 下午12:57, Yongji Xie 写道: > >>> On Thu, May 27, 2021 at 12:13 PM Jason Wang <jasowang@redhat.com> wrote: > >>>> 在 2021/5/17 下午5:55, Xie Yongji 写道: > >>>>> + > >>>>> +static int vduse_dev_msg_sync(struct vduse_dev *dev, > >>>>> + struct vduse_dev_msg *msg) > >>>>> +{ > >>>>> + init_waitqueue_head(&msg->waitq); > >>>>> + spin_lock(&dev->msg_lock); > >>>>> + vduse_enqueue_msg(&dev->send_list, msg); > >>>>> + wake_up(&dev->waitq); > >>>>> + spin_unlock(&dev->msg_lock); > >>>>> + wait_event_killable(msg->waitq, msg->completed); > >>>> What happens if the userspace(malicous) doesn't give a response forever? > >>>> > >>>> It looks like a DOS. If yes, we need to consider a way to fix that. > >>>> > >>> How about using wait_event_killable_timeout() instead? > >> > >> Probably, and then we need choose a suitable timeout and more important, > >> need to report the failure to virtio. > >> > > Makes sense to me. But it looks like some > > vdpa_config_ops/virtio_config_ops such as set_status() didn't have a > > return value. Now I add a WARN_ON() for the failure. Do you mean we > > need to add some change for virtio core to handle the failure? > > > Maybe, but I'm not sure how hard we can do that. > We need to change all virtio device drivers in this way. > We had NEEDS_RESET but it looks we don't implement it. > Could it handle the failure of get_feature() and get/set_config()? > Or a rough idea is that maybe need some relaxing to be coupled loosely > with userspace. E.g the device (control path) is implemented in the > kernel but the datapath is implemented in the userspace like TUN/TAP. > I think it can work for most cases. One problem is that the set_config might change the behavior of the data path at runtime, e.g. virtnet_set_mac_address() in the virtio-net driver and cache_type_store() in the virtio-blk driver. Not sure if this path is able to return before the datapath is aware of this change. Thanks, Yongji
在 2021/5/27 下午3:34, Yongji Xie 写道: > On Thu, May 27, 2021 at 1:40 PM Jason Wang <jasowang@redhat.com> wrote: >> >> 在 2021/5/27 下午1:08, Yongji Xie 写道: >>> On Thu, May 27, 2021 at 1:00 PM Jason Wang <jasowang@redhat.com> wrote: >>>> 在 2021/5/27 下午12:57, Yongji Xie 写道: >>>>> On Thu, May 27, 2021 at 12:13 PM Jason Wang <jasowang@redhat.com> wrote: >>>>>> 在 2021/5/17 下午5:55, Xie Yongji 写道: >>>>>>> + >>>>>>> +static int vduse_dev_msg_sync(struct vduse_dev *dev, >>>>>>> + struct vduse_dev_msg *msg) >>>>>>> +{ >>>>>>> + init_waitqueue_head(&msg->waitq); >>>>>>> + spin_lock(&dev->msg_lock); >>>>>>> + vduse_enqueue_msg(&dev->send_list, msg); >>>>>>> + wake_up(&dev->waitq); >>>>>>> + spin_unlock(&dev->msg_lock); >>>>>>> + wait_event_killable(msg->waitq, msg->completed); >>>>>> What happens if the userspace(malicous) doesn't give a response forever? >>>>>> >>>>>> It looks like a DOS. If yes, we need to consider a way to fix that. >>>>>> >>>>> How about using wait_event_killable_timeout() instead? >>>> Probably, and then we need choose a suitable timeout and more important, >>>> need to report the failure to virtio. >>>> >>> Makes sense to me. But it looks like some >>> vdpa_config_ops/virtio_config_ops such as set_status() didn't have a >>> return value. Now I add a WARN_ON() for the failure. Do you mean we >>> need to add some change for virtio core to handle the failure? >> >> Maybe, but I'm not sure how hard we can do that. >> > We need to change all virtio device drivers in this way. Probably. > >> We had NEEDS_RESET but it looks we don't implement it. >> > Could it handle the failure of get_feature() and get/set_config()? Looks not: " The device SHOULD set DEVICE_NEEDS_RESET when it enters an error state that a reset is needed. If DRIVER_OK is set, after it sets DEVICE_NEEDS_RESET, the device MUST send a device configuration change notification to the driver. " This looks implies that NEEDS_RESET may only work after device is probed. But in the current design, even the reset() is not reliable. > >> Or a rough idea is that maybe need some relaxing to be coupled loosely >> with userspace. E.g the device (control path) is implemented in the >> kernel but the datapath is implemented in the userspace like TUN/TAP. >> > I think it can work for most cases. One problem is that the set_config > might change the behavior of the data path at runtime, e.g. > virtnet_set_mac_address() in the virtio-net driver and > cache_type_store() in the virtio-blk driver. Not sure if this path is > able to return before the datapath is aware of this change. Good point. But set_config() should be rare: E.g in the case of virtio-net with VERSION_1, config space is read only, and it was set via control vq. For block, we can 1) start from without WCE or 2) we add a config change notification to userspace or 3) extend the spec to use vq instead of config space Thanks > > Thanks, > Yongji >
在 2021/5/27 下午4:41, Jason Wang 写道: > > 在 2021/5/27 下午3:34, Yongji Xie 写道: >> On Thu, May 27, 2021 at 1:40 PM Jason Wang <jasowang@redhat.com> wrote: >>> >>> 在 2021/5/27 下午1:08, Yongji Xie 写道: >>>> On Thu, May 27, 2021 at 1:00 PM Jason Wang <jasowang@redhat.com> >>>> wrote: >>>>> 在 2021/5/27 下午12:57, Yongji Xie 写道: >>>>>> On Thu, May 27, 2021 at 12:13 PM Jason Wang <jasowang@redhat.com> >>>>>> wrote: >>>>>>> 在 2021/5/17 下午5:55, Xie Yongji 写道: >>>>>>>> + >>>>>>>> +static int vduse_dev_msg_sync(struct vduse_dev *dev, >>>>>>>> + struct vduse_dev_msg *msg) >>>>>>>> +{ >>>>>>>> + init_waitqueue_head(&msg->waitq); >>>>>>>> + spin_lock(&dev->msg_lock); >>>>>>>> + vduse_enqueue_msg(&dev->send_list, msg); >>>>>>>> + wake_up(&dev->waitq); >>>>>>>> + spin_unlock(&dev->msg_lock); >>>>>>>> + wait_event_killable(msg->waitq, msg->completed); >>>>>>> What happens if the userspace(malicous) doesn't give a response >>>>>>> forever? >>>>>>> >>>>>>> It looks like a DOS. If yes, we need to consider a way to fix that. >>>>>>> >>>>>> How about using wait_event_killable_timeout() instead? >>>>> Probably, and then we need choose a suitable timeout and more >>>>> important, >>>>> need to report the failure to virtio. >>>>> >>>> Makes sense to me. But it looks like some >>>> vdpa_config_ops/virtio_config_ops such as set_status() didn't have a >>>> return value. Now I add a WARN_ON() for the failure. Do you mean we >>>> need to add some change for virtio core to handle the failure? >>> >>> Maybe, but I'm not sure how hard we can do that. >>> >> We need to change all virtio device drivers in this way. > > > Probably. > > >> >>> We had NEEDS_RESET but it looks we don't implement it. >>> >> Could it handle the failure of get_feature() and get/set_config()? > > > Looks not: > > " > > The device SHOULD set DEVICE_NEEDS_RESET when it enters an error state > that a reset is needed. If DRIVER_OK is set, after it sets > DEVICE_NEEDS_RESET, the device MUST send a device configuration change > notification to the driver. > > " > > This looks implies that NEEDS_RESET may only work after device is > probed. But in the current design, even the reset() is not reliable. > > >> >>> Or a rough idea is that maybe need some relaxing to be coupled loosely >>> with userspace. E.g the device (control path) is implemented in the >>> kernel but the datapath is implemented in the userspace like TUN/TAP. >>> >> I think it can work for most cases. One problem is that the set_config >> might change the behavior of the data path at runtime, e.g. >> virtnet_set_mac_address() in the virtio-net driver and >> cache_type_store() in the virtio-blk driver. Not sure if this path is >> able to return before the datapath is aware of this change. > > > Good point. > > But set_config() should be rare: > > E.g in the case of virtio-net with VERSION_1, config space is read > only, and it was set via control vq. > > For block, we can > > 1) start from without WCE or > 2) we add a config change notification to userspace or > 3) extend the spec to use vq instead of config space > > Thanks Another thing if we want to go this way: We need find a way to terminate the data path from the kernel side, to implement to reset semantic. Thanks > > >> >> Thanks, >> Yongji >>
On Thu, May 27, 2021 at 4:43 PM Jason Wang <jasowang@redhat.com> wrote: > > > 在 2021/5/27 下午4:41, Jason Wang 写道: > > > > 在 2021/5/27 下午3:34, Yongji Xie 写道: > >> On Thu, May 27, 2021 at 1:40 PM Jason Wang <jasowang@redhat.com> wrote: > >>> > >>> 在 2021/5/27 下午1:08, Yongji Xie 写道: > >>>> On Thu, May 27, 2021 at 1:00 PM Jason Wang <jasowang@redhat.com> > >>>> wrote: > >>>>> 在 2021/5/27 下午12:57, Yongji Xie 写道: > >>>>>> On Thu, May 27, 2021 at 12:13 PM Jason Wang <jasowang@redhat.com> > >>>>>> wrote: > >>>>>>> 在 2021/5/17 下午5:55, Xie Yongji 写道: > >>>>>>>> + > >>>>>>>> +static int vduse_dev_msg_sync(struct vduse_dev *dev, > >>>>>>>> + struct vduse_dev_msg *msg) > >>>>>>>> +{ > >>>>>>>> + init_waitqueue_head(&msg->waitq); > >>>>>>>> + spin_lock(&dev->msg_lock); > >>>>>>>> + vduse_enqueue_msg(&dev->send_list, msg); > >>>>>>>> + wake_up(&dev->waitq); > >>>>>>>> + spin_unlock(&dev->msg_lock); > >>>>>>>> + wait_event_killable(msg->waitq, msg->completed); > >>>>>>> What happens if the userspace(malicous) doesn't give a response > >>>>>>> forever? > >>>>>>> > >>>>>>> It looks like a DOS. If yes, we need to consider a way to fix that. > >>>>>>> > >>>>>> How about using wait_event_killable_timeout() instead? > >>>>> Probably, and then we need choose a suitable timeout and more > >>>>> important, > >>>>> need to report the failure to virtio. > >>>>> > >>>> Makes sense to me. But it looks like some > >>>> vdpa_config_ops/virtio_config_ops such as set_status() didn't have a > >>>> return value. Now I add a WARN_ON() for the failure. Do you mean we > >>>> need to add some change for virtio core to handle the failure? > >>> > >>> Maybe, but I'm not sure how hard we can do that. > >>> > >> We need to change all virtio device drivers in this way. > > > > > > Probably. > > > > > >> > >>> We had NEEDS_RESET but it looks we don't implement it. > >>> > >> Could it handle the failure of get_feature() and get/set_config()? > > > > > > Looks not: > > > > " > > > > The device SHOULD set DEVICE_NEEDS_RESET when it enters an error state > > that a reset is needed. If DRIVER_OK is set, after it sets > > DEVICE_NEEDS_RESET, the device MUST send a device configuration change > > notification to the driver. > > > > " > > > > This looks implies that NEEDS_RESET may only work after device is > > probed. But in the current design, even the reset() is not reliable. > > > > > >> > >>> Or a rough idea is that maybe need some relaxing to be coupled loosely > >>> with userspace. E.g the device (control path) is implemented in the > >>> kernel but the datapath is implemented in the userspace like TUN/TAP. > >>> > >> I think it can work for most cases. One problem is that the set_config > >> might change the behavior of the data path at runtime, e.g. > >> virtnet_set_mac_address() in the virtio-net driver and > >> cache_type_store() in the virtio-blk driver. Not sure if this path is > >> able to return before the datapath is aware of this change. > > > > > > Good point. > > > > But set_config() should be rare: > > > > E.g in the case of virtio-net with VERSION_1, config space is read > > only, and it was set via control vq. > > > > For block, we can > > > > 1) start from without WCE or > > 2) we add a config change notification to userspace or > > 3) extend the spec to use vq instead of config space > > > > Thanks > > > Another thing if we want to go this way: > > We need find a way to terminate the data path from the kernel side, to > implement to reset semantic. > Do you mean terminate the data path in vdpa_reset(). Is it ok to just notify userspace to stop data path asynchronously? Userspace should not be able to do any I/O at that time because the iotlb mapping is already removed. Thanks, Yongji
On Thu, May 27, 2021 at 4:41 PM Jason Wang <jasowang@redhat.com> wrote: > > > 在 2021/5/27 下午3:34, Yongji Xie 写道: > > On Thu, May 27, 2021 at 1:40 PM Jason Wang <jasowang@redhat.com> wrote: > >> > >> 在 2021/5/27 下午1:08, Yongji Xie 写道: > >>> On Thu, May 27, 2021 at 1:00 PM Jason Wang <jasowang@redhat.com> wrote: > >>>> 在 2021/5/27 下午12:57, Yongji Xie 写道: > >>>>> On Thu, May 27, 2021 at 12:13 PM Jason Wang <jasowang@redhat.com> wrote: > >>>>>> 在 2021/5/17 下午5:55, Xie Yongji 写道: > >>>>>>> + > >>>>>>> +static int vduse_dev_msg_sync(struct vduse_dev *dev, > >>>>>>> + struct vduse_dev_msg *msg) > >>>>>>> +{ > >>>>>>> + init_waitqueue_head(&msg->waitq); > >>>>>>> + spin_lock(&dev->msg_lock); > >>>>>>> + vduse_enqueue_msg(&dev->send_list, msg); > >>>>>>> + wake_up(&dev->waitq); > >>>>>>> + spin_unlock(&dev->msg_lock); > >>>>>>> + wait_event_killable(msg->waitq, msg->completed); > >>>>>> What happens if the userspace(malicous) doesn't give a response forever? > >>>>>> > >>>>>> It looks like a DOS. If yes, we need to consider a way to fix that. > >>>>>> > >>>>> How about using wait_event_killable_timeout() instead? > >>>> Probably, and then we need choose a suitable timeout and more important, > >>>> need to report the failure to virtio. > >>>> > >>> Makes sense to me. But it looks like some > >>> vdpa_config_ops/virtio_config_ops such as set_status() didn't have a > >>> return value. Now I add a WARN_ON() for the failure. Do you mean we > >>> need to add some change for virtio core to handle the failure? > >> > >> Maybe, but I'm not sure how hard we can do that. > >> > > We need to change all virtio device drivers in this way. > > > Probably. > > > > > >> We had NEEDS_RESET but it looks we don't implement it. > >> > > Could it handle the failure of get_feature() and get/set_config()? > > > Looks not: > > " > > The device SHOULD set DEVICE_NEEDS_RESET when it enters an error state > that a reset is needed. If DRIVER_OK is set, after it sets > DEVICE_NEEDS_RESET, the device MUST send a device configuration change > notification to the driver. > > " > > This looks implies that NEEDS_RESET may only work after device is > probed. But in the current design, even the reset() is not reliable. > > > > > >> Or a rough idea is that maybe need some relaxing to be coupled loosely > >> with userspace. E.g the device (control path) is implemented in the > >> kernel but the datapath is implemented in the userspace like TUN/TAP. > >> > > I think it can work for most cases. One problem is that the set_config > > might change the behavior of the data path at runtime, e.g. > > virtnet_set_mac_address() in the virtio-net driver and > > cache_type_store() in the virtio-blk driver. Not sure if this path is > > able to return before the datapath is aware of this change. > > > Good point. > > But set_config() should be rare: > > E.g in the case of virtio-net with VERSION_1, config space is read only, > and it was set via control vq. > > For block, we can > > 1) start from without WCE or > 2) we add a config change notification to userspace or I prefer this way. And I think we also need to do similar things for set/get_vq_state(). Thanks, Yongji
在 2021/5/27 下午6:14, Yongji Xie 写道: > On Thu, May 27, 2021 at 4:43 PM Jason Wang <jasowang@redhat.com> wrote: >> >> 在 2021/5/27 下午4:41, Jason Wang 写道: >>> 在 2021/5/27 下午3:34, Yongji Xie 写道: >>>> On Thu, May 27, 2021 at 1:40 PM Jason Wang <jasowang@redhat.com> wrote: >>>>> 在 2021/5/27 下午1:08, Yongji Xie 写道: >>>>>> On Thu, May 27, 2021 at 1:00 PM Jason Wang <jasowang@redhat.com> >>>>>> wrote: >>>>>>> 在 2021/5/27 下午12:57, Yongji Xie 写道: >>>>>>>> On Thu, May 27, 2021 at 12:13 PM Jason Wang <jasowang@redhat.com> >>>>>>>> wrote: >>>>>>>>> 在 2021/5/17 下午5:55, Xie Yongji 写道: >>>>>>>>>> + >>>>>>>>>> +static int vduse_dev_msg_sync(struct vduse_dev *dev, >>>>>>>>>> + struct vduse_dev_msg *msg) >>>>>>>>>> +{ >>>>>>>>>> + init_waitqueue_head(&msg->waitq); >>>>>>>>>> + spin_lock(&dev->msg_lock); >>>>>>>>>> + vduse_enqueue_msg(&dev->send_list, msg); >>>>>>>>>> + wake_up(&dev->waitq); >>>>>>>>>> + spin_unlock(&dev->msg_lock); >>>>>>>>>> + wait_event_killable(msg->waitq, msg->completed); >>>>>>>>> What happens if the userspace(malicous) doesn't give a response >>>>>>>>> forever? >>>>>>>>> >>>>>>>>> It looks like a DOS. If yes, we need to consider a way to fix that. >>>>>>>>> >>>>>>>> How about using wait_event_killable_timeout() instead? >>>>>>> Probably, and then we need choose a suitable timeout and more >>>>>>> important, >>>>>>> need to report the failure to virtio. >>>>>>> >>>>>> Makes sense to me. But it looks like some >>>>>> vdpa_config_ops/virtio_config_ops such as set_status() didn't have a >>>>>> return value. Now I add a WARN_ON() for the failure. Do you mean we >>>>>> need to add some change for virtio core to handle the failure? >>>>> Maybe, but I'm not sure how hard we can do that. >>>>> >>>> We need to change all virtio device drivers in this way. >>> >>> Probably. >>> >>> >>>>> We had NEEDS_RESET but it looks we don't implement it. >>>>> >>>> Could it handle the failure of get_feature() and get/set_config()? >>> >>> Looks not: >>> >>> " >>> >>> The device SHOULD set DEVICE_NEEDS_RESET when it enters an error state >>> that a reset is needed. If DRIVER_OK is set, after it sets >>> DEVICE_NEEDS_RESET, the device MUST send a device configuration change >>> notification to the driver. >>> >>> " >>> >>> This looks implies that NEEDS_RESET may only work after device is >>> probed. But in the current design, even the reset() is not reliable. >>> >>> >>>>> Or a rough idea is that maybe need some relaxing to be coupled loosely >>>>> with userspace. E.g the device (control path) is implemented in the >>>>> kernel but the datapath is implemented in the userspace like TUN/TAP. >>>>> >>>> I think it can work for most cases. One problem is that the set_config >>>> might change the behavior of the data path at runtime, e.g. >>>> virtnet_set_mac_address() in the virtio-net driver and >>>> cache_type_store() in the virtio-blk driver. Not sure if this path is >>>> able to return before the datapath is aware of this change. >>> >>> Good point. >>> >>> But set_config() should be rare: >>> >>> E.g in the case of virtio-net with VERSION_1, config space is read >>> only, and it was set via control vq. >>> >>> For block, we can >>> >>> 1) start from without WCE or >>> 2) we add a config change notification to userspace or >>> 3) extend the spec to use vq instead of config space >>> >>> Thanks >> >> Another thing if we want to go this way: >> >> We need find a way to terminate the data path from the kernel side, to >> implement to reset semantic. >> > Do you mean terminate the data path in vdpa_reset(). Yes. > Is it ok to just > notify userspace to stop data path asynchronously? For well-behaved userspace, yes but no for buggy or malicious ones. I had an idea, how about terminate IOTLB in this case? Then we're in fact turn datapath off. Thanks > Userspace should > not be able to do any I/O at that time because the iotlb mapping is > already removed. > > Thanks, > Yongji >
在 2021/5/27 下午9:17, Yongji Xie 写道: > On Thu, May 27, 2021 at 4:41 PM Jason Wang <jasowang@redhat.com> wrote: >> >> 在 2021/5/27 下午3:34, Yongji Xie 写道: >>> On Thu, May 27, 2021 at 1:40 PM Jason Wang <jasowang@redhat.com> wrote: >>>> 在 2021/5/27 下午1:08, Yongji Xie 写道: >>>>> On Thu, May 27, 2021 at 1:00 PM Jason Wang <jasowang@redhat.com> wrote: >>>>>> 在 2021/5/27 下午12:57, Yongji Xie 写道: >>>>>>> On Thu, May 27, 2021 at 12:13 PM Jason Wang <jasowang@redhat.com> wrote: >>>>>>>> 在 2021/5/17 下午5:55, Xie Yongji 写道: >>>>>>>>> + >>>>>>>>> +static int vduse_dev_msg_sync(struct vduse_dev *dev, >>>>>>>>> + struct vduse_dev_msg *msg) >>>>>>>>> +{ >>>>>>>>> + init_waitqueue_head(&msg->waitq); >>>>>>>>> + spin_lock(&dev->msg_lock); >>>>>>>>> + vduse_enqueue_msg(&dev->send_list, msg); >>>>>>>>> + wake_up(&dev->waitq); >>>>>>>>> + spin_unlock(&dev->msg_lock); >>>>>>>>> + wait_event_killable(msg->waitq, msg->completed); >>>>>>>> What happens if the userspace(malicous) doesn't give a response forever? >>>>>>>> >>>>>>>> It looks like a DOS. If yes, we need to consider a way to fix that. >>>>>>>> >>>>>>> How about using wait_event_killable_timeout() instead? >>>>>> Probably, and then we need choose a suitable timeout and more important, >>>>>> need to report the failure to virtio. >>>>>> >>>>> Makes sense to me. But it looks like some >>>>> vdpa_config_ops/virtio_config_ops such as set_status() didn't have a >>>>> return value. Now I add a WARN_ON() for the failure. Do you mean we >>>>> need to add some change for virtio core to handle the failure? >>>> Maybe, but I'm not sure how hard we can do that. >>>> >>> We need to change all virtio device drivers in this way. >> >> Probably. >> >> >>>> We had NEEDS_RESET but it looks we don't implement it. >>>> >>> Could it handle the failure of get_feature() and get/set_config()? >> >> Looks not: >> >> " >> >> The device SHOULD set DEVICE_NEEDS_RESET when it enters an error state >> that a reset is needed. If DRIVER_OK is set, after it sets >> DEVICE_NEEDS_RESET, the device MUST send a device configuration change >> notification to the driver. >> >> " >> >> This looks implies that NEEDS_RESET may only work after device is >> probed. But in the current design, even the reset() is not reliable. >> >> >>>> Or a rough idea is that maybe need some relaxing to be coupled loosely >>>> with userspace. E.g the device (control path) is implemented in the >>>> kernel but the datapath is implemented in the userspace like TUN/TAP. >>>> >>> I think it can work for most cases. One problem is that the set_config >>> might change the behavior of the data path at runtime, e.g. >>> virtnet_set_mac_address() in the virtio-net driver and >>> cache_type_store() in the virtio-blk driver. Not sure if this path is >>> able to return before the datapath is aware of this change. >> >> Good point. >> >> But set_config() should be rare: >> >> E.g in the case of virtio-net with VERSION_1, config space is read only, >> and it was set via control vq. >> >> For block, we can >> >> 1) start from without WCE or >> 2) we add a config change notification to userspace or > I prefer this way. And I think we also need to do similar things for > set/get_vq_state(). Yes, I agree. Thanks > > Thanks, > Yongji >
On Fri, May 28, 2021 at 9:33 AM Jason Wang <jasowang@redhat.com> wrote: > > > 在 2021/5/27 下午6:14, Yongji Xie 写道: > > On Thu, May 27, 2021 at 4:43 PM Jason Wang <jasowang@redhat.com> wrote: > >> > >> 在 2021/5/27 下午4:41, Jason Wang 写道: > >>> 在 2021/5/27 下午3:34, Yongji Xie 写道: > >>>> On Thu, May 27, 2021 at 1:40 PM Jason Wang <jasowang@redhat.com> wrote: > >>>>> 在 2021/5/27 下午1:08, Yongji Xie 写道: > >>>>>> On Thu, May 27, 2021 at 1:00 PM Jason Wang <jasowang@redhat.com> > >>>>>> wrote: > >>>>>>> 在 2021/5/27 下午12:57, Yongji Xie 写道: > >>>>>>>> On Thu, May 27, 2021 at 12:13 PM Jason Wang <jasowang@redhat.com> > >>>>>>>> wrote: > >>>>>>>>> 在 2021/5/17 下午5:55, Xie Yongji 写道: > >>>>>>>>>> + > >>>>>>>>>> +static int vduse_dev_msg_sync(struct vduse_dev *dev, > >>>>>>>>>> + struct vduse_dev_msg *msg) > >>>>>>>>>> +{ > >>>>>>>>>> + init_waitqueue_head(&msg->waitq); > >>>>>>>>>> + spin_lock(&dev->msg_lock); > >>>>>>>>>> + vduse_enqueue_msg(&dev->send_list, msg); > >>>>>>>>>> + wake_up(&dev->waitq); > >>>>>>>>>> + spin_unlock(&dev->msg_lock); > >>>>>>>>>> + wait_event_killable(msg->waitq, msg->completed); > >>>>>>>>> What happens if the userspace(malicous) doesn't give a response > >>>>>>>>> forever? > >>>>>>>>> > >>>>>>>>> It looks like a DOS. If yes, we need to consider a way to fix that. > >>>>>>>>> > >>>>>>>> How about using wait_event_killable_timeout() instead? > >>>>>>> Probably, and then we need choose a suitable timeout and more > >>>>>>> important, > >>>>>>> need to report the failure to virtio. > >>>>>>> > >>>>>> Makes sense to me. But it looks like some > >>>>>> vdpa_config_ops/virtio_config_ops such as set_status() didn't have a > >>>>>> return value. Now I add a WARN_ON() for the failure. Do you mean we > >>>>>> need to add some change for virtio core to handle the failure? > >>>>> Maybe, but I'm not sure how hard we can do that. > >>>>> > >>>> We need to change all virtio device drivers in this way. > >>> > >>> Probably. > >>> > >>> > >>>>> We had NEEDS_RESET but it looks we don't implement it. > >>>>> > >>>> Could it handle the failure of get_feature() and get/set_config()? > >>> > >>> Looks not: > >>> > >>> " > >>> > >>> The device SHOULD set DEVICE_NEEDS_RESET when it enters an error state > >>> that a reset is needed. If DRIVER_OK is set, after it sets > >>> DEVICE_NEEDS_RESET, the device MUST send a device configuration change > >>> notification to the driver. > >>> > >>> " > >>> > >>> This looks implies that NEEDS_RESET may only work after device is > >>> probed. But in the current design, even the reset() is not reliable. > >>> > >>> > >>>>> Or a rough idea is that maybe need some relaxing to be coupled loosely > >>>>> with userspace. E.g the device (control path) is implemented in the > >>>>> kernel but the datapath is implemented in the userspace like TUN/TAP. > >>>>> > >>>> I think it can work for most cases. One problem is that the set_config > >>>> might change the behavior of the data path at runtime, e.g. > >>>> virtnet_set_mac_address() in the virtio-net driver and > >>>> cache_type_store() in the virtio-blk driver. Not sure if this path is > >>>> able to return before the datapath is aware of this change. > >>> > >>> Good point. > >>> > >>> But set_config() should be rare: > >>> > >>> E.g in the case of virtio-net with VERSION_1, config space is read > >>> only, and it was set via control vq. > >>> > >>> For block, we can > >>> > >>> 1) start from without WCE or > >>> 2) we add a config change notification to userspace or > >>> 3) extend the spec to use vq instead of config space > >>> > >>> Thanks > >> > >> Another thing if we want to go this way: > >> > >> We need find a way to terminate the data path from the kernel side, to > >> implement to reset semantic. > >> > > Do you mean terminate the data path in vdpa_reset(). > > > Yes. > > > > Is it ok to just > > notify userspace to stop data path asynchronously? > > > For well-behaved userspace, yes but no for buggy or malicious ones. > But the buggy or malicious daemons can't do anything if my understanding is correct. > I had an idea, how about terminate IOTLB in this case? Then we're in > fact turn datapath off. > Sorry, I didn't get your point here. What do you mean by terminating IOTLB? Remove iotlb mapping? But userspace can still access the mapped region. Thanks, Yongji
在 2021/5/28 上午11:54, Yongji Xie 写道: > On Fri, May 28, 2021 at 9:33 AM Jason Wang <jasowang@redhat.com> wrote: >> >> 在 2021/5/27 下午6:14, Yongji Xie 写道: >>> On Thu, May 27, 2021 at 4:43 PM Jason Wang <jasowang@redhat.com> wrote: >>>> 在 2021/5/27 下午4:41, Jason Wang 写道: >>>>> 在 2021/5/27 下午3:34, Yongji Xie 写道: >>>>>> On Thu, May 27, 2021 at 1:40 PM Jason Wang <jasowang@redhat.com> wrote: >>>>>>> 在 2021/5/27 下午1:08, Yongji Xie 写道: >>>>>>>> On Thu, May 27, 2021 at 1:00 PM Jason Wang <jasowang@redhat.com> >>>>>>>> wrote: >>>>>>>>> 在 2021/5/27 下午12:57, Yongji Xie 写道: >>>>>>>>>> On Thu, May 27, 2021 at 12:13 PM Jason Wang <jasowang@redhat.com> >>>>>>>>>> wrote: >>>>>>>>>>> 在 2021/5/17 下午5:55, Xie Yongji 写道: >>>>>>>>>>>> + >>>>>>>>>>>> +static int vduse_dev_msg_sync(struct vduse_dev *dev, >>>>>>>>>>>> + struct vduse_dev_msg *msg) >>>>>>>>>>>> +{ >>>>>>>>>>>> + init_waitqueue_head(&msg->waitq); >>>>>>>>>>>> + spin_lock(&dev->msg_lock); >>>>>>>>>>>> + vduse_enqueue_msg(&dev->send_list, msg); >>>>>>>>>>>> + wake_up(&dev->waitq); >>>>>>>>>>>> + spin_unlock(&dev->msg_lock); >>>>>>>>>>>> + wait_event_killable(msg->waitq, msg->completed); >>>>>>>>>>> What happens if the userspace(malicous) doesn't give a response >>>>>>>>>>> forever? >>>>>>>>>>> >>>>>>>>>>> It looks like a DOS. If yes, we need to consider a way to fix that. >>>>>>>>>>> >>>>>>>>>> How about using wait_event_killable_timeout() instead? >>>>>>>>> Probably, and then we need choose a suitable timeout and more >>>>>>>>> important, >>>>>>>>> need to report the failure to virtio. >>>>>>>>> >>>>>>>> Makes sense to me. But it looks like some >>>>>>>> vdpa_config_ops/virtio_config_ops such as set_status() didn't have a >>>>>>>> return value. Now I add a WARN_ON() for the failure. Do you mean we >>>>>>>> need to add some change for virtio core to handle the failure? >>>>>>> Maybe, but I'm not sure how hard we can do that. >>>>>>> >>>>>> We need to change all virtio device drivers in this way. >>>>> Probably. >>>>> >>>>> >>>>>>> We had NEEDS_RESET but it looks we don't implement it. >>>>>>> >>>>>> Could it handle the failure of get_feature() and get/set_config()? >>>>> Looks not: >>>>> >>>>> " >>>>> >>>>> The device SHOULD set DEVICE_NEEDS_RESET when it enters an error state >>>>> that a reset is needed. If DRIVER_OK is set, after it sets >>>>> DEVICE_NEEDS_RESET, the device MUST send a device configuration change >>>>> notification to the driver. >>>>> >>>>> " >>>>> >>>>> This looks implies that NEEDS_RESET may only work after device is >>>>> probed. But in the current design, even the reset() is not reliable. >>>>> >>>>> >>>>>>> Or a rough idea is that maybe need some relaxing to be coupled loosely >>>>>>> with userspace. E.g the device (control path) is implemented in the >>>>>>> kernel but the datapath is implemented in the userspace like TUN/TAP. >>>>>>> >>>>>> I think it can work for most cases. One problem is that the set_config >>>>>> might change the behavior of the data path at runtime, e.g. >>>>>> virtnet_set_mac_address() in the virtio-net driver and >>>>>> cache_type_store() in the virtio-blk driver. Not sure if this path is >>>>>> able to return before the datapath is aware of this change. >>>>> Good point. >>>>> >>>>> But set_config() should be rare: >>>>> >>>>> E.g in the case of virtio-net with VERSION_1, config space is read >>>>> only, and it was set via control vq. >>>>> >>>>> For block, we can >>>>> >>>>> 1) start from without WCE or >>>>> 2) we add a config change notification to userspace or >>>>> 3) extend the spec to use vq instead of config space >>>>> >>>>> Thanks >>>> Another thing if we want to go this way: >>>> >>>> We need find a way to terminate the data path from the kernel side, to >>>> implement to reset semantic. >>>> >>> Do you mean terminate the data path in vdpa_reset(). >> >> Yes. >> >> >>> Is it ok to just >>> notify userspace to stop data path asynchronously? >> >> For well-behaved userspace, yes but no for buggy or malicious ones. >> > But the buggy or malicious daemons can't do anything if my > understanding is correct. You're right. I originally thought there can still have bouncing. But consider we don't do that during fault. It should be safe. > >> I had an idea, how about terminate IOTLB in this case? Then we're in >> fact turn datapath off. >> > Sorry, I didn't get your point here. What do you mean by terminating > IOTLB? I meant terminate the bouncing but it looks safe after a second thought :) Thanks > Remove iotlb mapping? But userspace can still access the mapped > region. > > Thanks, > Yongji >
On Fri, May 28, 2021 at 10:31 AM Jason Wang <jasowang@redhat.com> wrote: > > > 在 2021/5/27 下午9:17, Yongji Xie 写道: > > On Thu, May 27, 2021 at 4:41 PM Jason Wang <jasowang@redhat.com> wrote: > >> > >> 在 2021/5/27 下午3:34, Yongji Xie 写道: > >>> On Thu, May 27, 2021 at 1:40 PM Jason Wang <jasowang@redhat.com> wrote: > >>>> 在 2021/5/27 下午1:08, Yongji Xie 写道: > >>>>> On Thu, May 27, 2021 at 1:00 PM Jason Wang <jasowang@redhat.com> wrote: > >>>>>> 在 2021/5/27 下午12:57, Yongji Xie 写道: > >>>>>>> On Thu, May 27, 2021 at 12:13 PM Jason Wang <jasowang@redhat.com> wrote: > >>>>>>>> 在 2021/5/17 下午5:55, Xie Yongji 写道: > >>>>>>>>> + > >>>>>>>>> +static int vduse_dev_msg_sync(struct vduse_dev *dev, > >>>>>>>>> + struct vduse_dev_msg *msg) > >>>>>>>>> +{ > >>>>>>>>> + init_waitqueue_head(&msg->waitq); > >>>>>>>>> + spin_lock(&dev->msg_lock); > >>>>>>>>> + vduse_enqueue_msg(&dev->send_list, msg); > >>>>>>>>> + wake_up(&dev->waitq); > >>>>>>>>> + spin_unlock(&dev->msg_lock); > >>>>>>>>> + wait_event_killable(msg->waitq, msg->completed); > >>>>>>>> What happens if the userspace(malicous) doesn't give a response forever? > >>>>>>>> > >>>>>>>> It looks like a DOS. If yes, we need to consider a way to fix that. > >>>>>>>> > >>>>>>> How about using wait_event_killable_timeout() instead? > >>>>>> Probably, and then we need choose a suitable timeout and more important, > >>>>>> need to report the failure to virtio. > >>>>>> > >>>>> Makes sense to me. But it looks like some > >>>>> vdpa_config_ops/virtio_config_ops such as set_status() didn't have a > >>>>> return value. Now I add a WARN_ON() for the failure. Do you mean we > >>>>> need to add some change for virtio core to handle the failure? > >>>> Maybe, but I'm not sure how hard we can do that. > >>>> > >>> We need to change all virtio device drivers in this way. > >> > >> Probably. > >> > >> > >>>> We had NEEDS_RESET but it looks we don't implement it. > >>>> > >>> Could it handle the failure of get_feature() and get/set_config()? > >> > >> Looks not: > >> > >> " > >> > >> The device SHOULD set DEVICE_NEEDS_RESET when it enters an error state > >> that a reset is needed. If DRIVER_OK is set, after it sets > >> DEVICE_NEEDS_RESET, the device MUST send a device configuration change > >> notification to the driver. > >> > >> " > >> > >> This looks implies that NEEDS_RESET may only work after device is > >> probed. But in the current design, even the reset() is not reliable. > >> > >> > >>>> Or a rough idea is that maybe need some relaxing to be coupled loosely > >>>> with userspace. E.g the device (control path) is implemented in the > >>>> kernel but the datapath is implemented in the userspace like TUN/TAP. > >>>> > >>> I think it can work for most cases. One problem is that the set_config > >>> might change the behavior of the data path at runtime, e.g. > >>> virtnet_set_mac_address() in the virtio-net driver and > >>> cache_type_store() in the virtio-blk driver. Not sure if this path is > >>> able to return before the datapath is aware of this change. > >> > >> Good point. > >> > >> But set_config() should be rare: > >> > >> E.g in the case of virtio-net with VERSION_1, config space is read only, > >> and it was set via control vq. > >> > >> For block, we can > >> > >> 1) start from without WCE or > >> 2) we add a config change notification to userspace or > > I prefer this way. And I think we also need to do similar things for > > set/get_vq_state(). > > > Yes, I agree. > Hi Jason, Now I'm working on this. But I found the config change notification must be synchronous in the virtio-blk case, which means the kernel still needs to wait for the response from userspace in set_config(). Otherwise, some I/Os might still run the old way after we change the cache_type in sysfs. The simple ways to solve this problem are: 1. Only support read-only config space, disable WCE as you suggested 2. Add a return value to set_config() and handle the failure only in virtio-blk driver 3. Print some warnings after timeout since it only affects the dataplane which is under userspace's control Any suggestions? Thanks, Yongji
在 2021/5/31 下午12:27, Yongji Xie 写道: > On Fri, May 28, 2021 at 10:31 AM Jason Wang <jasowang@redhat.com> wrote: >> >> 在 2021/5/27 下午9:17, Yongji Xie 写道: >>> On Thu, May 27, 2021 at 4:41 PM Jason Wang <jasowang@redhat.com> wrote: >>>> 在 2021/5/27 下午3:34, Yongji Xie 写道: >>>>> On Thu, May 27, 2021 at 1:40 PM Jason Wang <jasowang@redhat.com> wrote: >>>>>> 在 2021/5/27 下午1:08, Yongji Xie 写道: >>>>>>> On Thu, May 27, 2021 at 1:00 PM Jason Wang <jasowang@redhat.com> wrote: >>>>>>>> 在 2021/5/27 下午12:57, Yongji Xie 写道: >>>>>>>>> On Thu, May 27, 2021 at 12:13 PM Jason Wang <jasowang@redhat.com> wrote: >>>>>>>>>> 在 2021/5/17 下午5:55, Xie Yongji 写道: >>>>>>>>>>> + >>>>>>>>>>> +static int vduse_dev_msg_sync(struct vduse_dev *dev, >>>>>>>>>>> + struct vduse_dev_msg *msg) >>>>>>>>>>> +{ >>>>>>>>>>> + init_waitqueue_head(&msg->waitq); >>>>>>>>>>> + spin_lock(&dev->msg_lock); >>>>>>>>>>> + vduse_enqueue_msg(&dev->send_list, msg); >>>>>>>>>>> + wake_up(&dev->waitq); >>>>>>>>>>> + spin_unlock(&dev->msg_lock); >>>>>>>>>>> + wait_event_killable(msg->waitq, msg->completed); >>>>>>>>>> What happens if the userspace(malicous) doesn't give a response forever? >>>>>>>>>> >>>>>>>>>> It looks like a DOS. If yes, we need to consider a way to fix that. >>>>>>>>>> >>>>>>>>> How about using wait_event_killable_timeout() instead? >>>>>>>> Probably, and then we need choose a suitable timeout and more important, >>>>>>>> need to report the failure to virtio. >>>>>>>> >>>>>>> Makes sense to me. But it looks like some >>>>>>> vdpa_config_ops/virtio_config_ops such as set_status() didn't have a >>>>>>> return value. Now I add a WARN_ON() for the failure. Do you mean we >>>>>>> need to add some change for virtio core to handle the failure? >>>>>> Maybe, but I'm not sure how hard we can do that. >>>>>> >>>>> We need to change all virtio device drivers in this way. >>>> Probably. >>>> >>>> >>>>>> We had NEEDS_RESET but it looks we don't implement it. >>>>>> >>>>> Could it handle the failure of get_feature() and get/set_config()? >>>> Looks not: >>>> >>>> " >>>> >>>> The device SHOULD set DEVICE_NEEDS_RESET when it enters an error state >>>> that a reset is needed. If DRIVER_OK is set, after it sets >>>> DEVICE_NEEDS_RESET, the device MUST send a device configuration change >>>> notification to the driver. >>>> >>>> " >>>> >>>> This looks implies that NEEDS_RESET may only work after device is >>>> probed. But in the current design, even the reset() is not reliable. >>>> >>>> >>>>>> Or a rough idea is that maybe need some relaxing to be coupled loosely >>>>>> with userspace. E.g the device (control path) is implemented in the >>>>>> kernel but the datapath is implemented in the userspace like TUN/TAP. >>>>>> >>>>> I think it can work for most cases. One problem is that the set_config >>>>> might change the behavior of the data path at runtime, e.g. >>>>> virtnet_set_mac_address() in the virtio-net driver and >>>>> cache_type_store() in the virtio-blk driver. Not sure if this path is >>>>> able to return before the datapath is aware of this change. >>>> Good point. >>>> >>>> But set_config() should be rare: >>>> >>>> E.g in the case of virtio-net with VERSION_1, config space is read only, >>>> and it was set via control vq. >>>> >>>> For block, we can >>>> >>>> 1) start from without WCE or >>>> 2) we add a config change notification to userspace or >>> I prefer this way. And I think we also need to do similar things for >>> set/get_vq_state(). >> >> Yes, I agree. >> > Hi Jason, > > Now I'm working on this. But I found the config change notification > must be synchronous in the virtio-blk case, which means the kernel > still needs to wait for the response from userspace in set_config(). > Otherwise, some I/Os might still run the old way after we change the > cache_type in sysfs. > > The simple ways to solve this problem are: > > 1. Only support read-only config space, disable WCE as you suggested > 2. Add a return value to set_config() and handle the failure only in > virtio-blk driver > 3. Print some warnings after timeout since it only affects the > dataplane which is under userspace's control > > Any suggestions? Let's go without WCE first and make VDUSE work first. We can then think of a solution for WCE on top. Thanks > > Thanks, > Yongji >
On Mon, May 17, 2021 at 05:55:12PM +0800, Xie Yongji wrote: > +struct vduse_dev { > + struct vduse_vdpa *vdev; > + struct device dev; > + struct cdev cdev; You now have 2 reference counted devices controling the lifespace of a single structure. A mess that is guaranteed to go wrong. Please never do this. > + struct vduse_virtqueue *vqs; > + struct vduse_iova_domain *domain; > + char *name; > + struct mutex lock; > + spinlock_t msg_lock; > + atomic64_t msg_unique; Why do you need an atomic and a lock? > + wait_queue_head_t waitq; > + struct list_head send_list; > + struct list_head recv_list; > + struct list_head list; > + struct vdpa_callback config_cb; > + struct work_struct inject; > + spinlock_t irq_lock; > + unsigned long api_version; > + bool connected; > + int minor; > + u16 vq_size_max; > + u32 vq_num; > + u32 vq_align; > + u32 config_size; > + u32 device_id; > + u32 vendor_id; > +}; > + > +struct vduse_dev_msg { > + struct vduse_dev_request req; > + struct vduse_dev_response resp; > + struct list_head list; > + wait_queue_head_t waitq; > + bool completed; > +}; > + > +struct vduse_control { > + unsigned long api_version; u64? > +}; > + > +static unsigned long max_bounce_size = (64 * 1024 * 1024); > +module_param(max_bounce_size, ulong, 0444); > +MODULE_PARM_DESC(max_bounce_size, "Maximum bounce buffer size. (default: 64M)"); > + > +static unsigned long max_iova_size = (128 * 1024 * 1024); > +module_param(max_iova_size, ulong, 0444); > +MODULE_PARM_DESC(max_iova_size, "Maximum iova space size (default: 128M)"); > + > +static bool allow_unsafe_device_emulation; > +module_param(allow_unsafe_device_emulation, bool, 0444); > +MODULE_PARM_DESC(allow_unsafe_device_emulation, "Allow emulating unsafe device." > + " We must make sure the userspace device emulation process is trusted." > + " Otherwise, don't enable this option. (default: false)"); > + This is not the 1990's anymore, please never use module parameters, make these per-device attributes if you really need them. > +static int vduse_init(void) > +{ > + int ret; > + > + if (max_bounce_size >= max_iova_size) > + return -EINVAL; > + > + ret = misc_register(&vduse_misc); > + if (ret) > + return ret; > + > + vduse_class = class_create(THIS_MODULE, "vduse"); If you have a misc device, you do not need to create a class at the same time. Why are you doing both here? Just stick with the misc device, no need for anything else. > + if (IS_ERR(vduse_class)) { > + ret = PTR_ERR(vduse_class); > + goto err_class; > + } > + vduse_class->devnode = vduse_devnode; > + > + ret = alloc_chrdev_region(&vduse_major, 0, VDUSE_DEV_MAX, "vduse"); Wait, you want a whole major? What is the misc device for? > +MODULE_VERSION(DRV_VERSION); MODULE_VERSION() makes no sense when the code is merged into the kernel tree, so you can just drop that. thanks, greg k-h
Hi Greg, Thanks a lot for the review! On Mon, May 31, 2021 at 12:56 PM Greg KH <gregkh@linuxfoundation.org> wrote: > > On Mon, May 17, 2021 at 05:55:12PM +0800, Xie Yongji wrote: > > +struct vduse_dev { > > + struct vduse_vdpa *vdev; > > + struct device dev; > > + struct cdev cdev; > > You now have 2 reference counted devices controling the lifespace of a > single structure. A mess that is guaranteed to go wrong. Please never > do this. > These two are both used by cdev_device_add(). Looks like I didn't find any problem. Any suggestions? > > + struct vduse_virtqueue *vqs; > > + struct vduse_iova_domain *domain; > > + char *name; > > + struct mutex lock; > > + spinlock_t msg_lock; > > + atomic64_t msg_unique; > > Why do you need an atomic and a lock? > You are right. We don't need an atomic here. > > + wait_queue_head_t waitq; > > + struct list_head send_list; > > + struct list_head recv_list; > > + struct list_head list; > > + struct vdpa_callback config_cb; > > + struct work_struct inject; > > + spinlock_t irq_lock; > > + unsigned long api_version; > > + bool connected; > > + int minor; > > + u16 vq_size_max; > > + u32 vq_num; > > + u32 vq_align; > > + u32 config_size; > > + u32 device_id; > > + u32 vendor_id; > > +}; > > + > > +struct vduse_dev_msg { > > + struct vduse_dev_request req; > > + struct vduse_dev_response resp; > > + struct list_head list; > > + wait_queue_head_t waitq; > > + bool completed; > > +}; > > + > > +struct vduse_control { > > + unsigned long api_version; > > u64? > OK. > > +}; > > + > > +static unsigned long max_bounce_size = (64 * 1024 * 1024); > > +module_param(max_bounce_size, ulong, 0444); > > +MODULE_PARM_DESC(max_bounce_size, "Maximum bounce buffer size. (default: 64M)"); > > + > > +static unsigned long max_iova_size = (128 * 1024 * 1024); > > +module_param(max_iova_size, ulong, 0444); > > +MODULE_PARM_DESC(max_iova_size, "Maximum iova space size (default: 128M)"); > > + > > +static bool allow_unsafe_device_emulation; > > +module_param(allow_unsafe_device_emulation, bool, 0444); > > +MODULE_PARM_DESC(allow_unsafe_device_emulation, "Allow emulating unsafe device." > > + " We must make sure the userspace device emulation process is trusted." > > + " Otherwise, don't enable this option. (default: false)"); > > + > > This is not the 1990's anymore, please never use module parameters, make > these per-device attributes if you really need them. > These parameters will be used before the device is created. Or do you mean add some attributes to the control device? > > +static int vduse_init(void) > > +{ > > + int ret; > > + > > + if (max_bounce_size >= max_iova_size) > > + return -EINVAL; > > + > > + ret = misc_register(&vduse_misc); > > + if (ret) > > + return ret; > > + > > + vduse_class = class_create(THIS_MODULE, "vduse"); > > If you have a misc device, you do not need to create a class at the same > time. Why are you doing both here? Just stick with the misc device, no > need for anything else. > The misc device is the control device represented by /dev/vduse/control. Then a VDUSE device represented by /dev/vduse/$NAME can be created by the ioctl(VDUSE_CREATE_DEV) on this control device. > > + if (IS_ERR(vduse_class)) { > > + ret = PTR_ERR(vduse_class); > > + goto err_class; > > + } > > + vduse_class->devnode = vduse_devnode; > > + > > + ret = alloc_chrdev_region(&vduse_major, 0, VDUSE_DEV_MAX, "vduse"); > > Wait, you want a whole major? What is the misc device for? > The misc device is used for controlling. And VDUSE devices are allocated in a dynamic chardev range. Or do I need to reserve the first minor for the control device instead? > > +MODULE_VERSION(DRV_VERSION); > > MODULE_VERSION() makes no sense when the code is merged into the kernel > tree, so you can just drop that. > Will do it. Thanks, Yongji
On Mon, May 31, 2021 at 12:39 PM Jason Wang <jasowang@redhat.com> wrote: > > > 在 2021/5/31 下午12:27, Yongji Xie 写道: > > On Fri, May 28, 2021 at 10:31 AM Jason Wang <jasowang@redhat.com> wrote: > >> > >> 在 2021/5/27 下午9:17, Yongji Xie 写道: > >>> On Thu, May 27, 2021 at 4:41 PM Jason Wang <jasowang@redhat.com> wrote: > >>>> 在 2021/5/27 下午3:34, Yongji Xie 写道: > >>>>> On Thu, May 27, 2021 at 1:40 PM Jason Wang <jasowang@redhat.com> wrote: > >>>>>> 在 2021/5/27 下午1:08, Yongji Xie 写道: > >>>>>>> On Thu, May 27, 2021 at 1:00 PM Jason Wang <jasowang@redhat.com> wrote: > >>>>>>>> 在 2021/5/27 下午12:57, Yongji Xie 写道: > >>>>>>>>> On Thu, May 27, 2021 at 12:13 PM Jason Wang <jasowang@redhat.com> wrote: > >>>>>>>>>> 在 2021/5/17 下午5:55, Xie Yongji 写道: > >>>>>>>>>>> + > >>>>>>>>>>> +static int vduse_dev_msg_sync(struct vduse_dev *dev, > >>>>>>>>>>> + struct vduse_dev_msg *msg) > >>>>>>>>>>> +{ > >>>>>>>>>>> + init_waitqueue_head(&msg->waitq); > >>>>>>>>>>> + spin_lock(&dev->msg_lock); > >>>>>>>>>>> + vduse_enqueue_msg(&dev->send_list, msg); > >>>>>>>>>>> + wake_up(&dev->waitq); > >>>>>>>>>>> + spin_unlock(&dev->msg_lock); > >>>>>>>>>>> + wait_event_killable(msg->waitq, msg->completed); > >>>>>>>>>> What happens if the userspace(malicous) doesn't give a response forever? > >>>>>>>>>> > >>>>>>>>>> It looks like a DOS. If yes, we need to consider a way to fix that. > >>>>>>>>>> > >>>>>>>>> How about using wait_event_killable_timeout() instead? > >>>>>>>> Probably, and then we need choose a suitable timeout and more important, > >>>>>>>> need to report the failure to virtio. > >>>>>>>> > >>>>>>> Makes sense to me. But it looks like some > >>>>>>> vdpa_config_ops/virtio_config_ops such as set_status() didn't have a > >>>>>>> return value. Now I add a WARN_ON() for the failure. Do you mean we > >>>>>>> need to add some change for virtio core to handle the failure? > >>>>>> Maybe, but I'm not sure how hard we can do that. > >>>>>> > >>>>> We need to change all virtio device drivers in this way. > >>>> Probably. > >>>> > >>>> > >>>>>> We had NEEDS_RESET but it looks we don't implement it. > >>>>>> > >>>>> Could it handle the failure of get_feature() and get/set_config()? > >>>> Looks not: > >>>> > >>>> " > >>>> > >>>> The device SHOULD set DEVICE_NEEDS_RESET when it enters an error state > >>>> that a reset is needed. If DRIVER_OK is set, after it sets > >>>> DEVICE_NEEDS_RESET, the device MUST send a device configuration change > >>>> notification to the driver. > >>>> > >>>> " > >>>> > >>>> This looks implies that NEEDS_RESET may only work after device is > >>>> probed. But in the current design, even the reset() is not reliable. > >>>> > >>>> > >>>>>> Or a rough idea is that maybe need some relaxing to be coupled loosely > >>>>>> with userspace. E.g the device (control path) is implemented in the > >>>>>> kernel but the datapath is implemented in the userspace like TUN/TAP. > >>>>>> > >>>>> I think it can work for most cases. One problem is that the set_config > >>>>> might change the behavior of the data path at runtime, e.g. > >>>>> virtnet_set_mac_address() in the virtio-net driver and > >>>>> cache_type_store() in the virtio-blk driver. Not sure if this path is > >>>>> able to return before the datapath is aware of this change. > >>>> Good point. > >>>> > >>>> But set_config() should be rare: > >>>> > >>>> E.g in the case of virtio-net with VERSION_1, config space is read only, > >>>> and it was set via control vq. > >>>> > >>>> For block, we can > >>>> > >>>> 1) start from without WCE or > >>>> 2) we add a config change notification to userspace or > >>> I prefer this way. And I think we also need to do similar things for > >>> set/get_vq_state(). > >> > >> Yes, I agree. > >> > > Hi Jason, > > > > Now I'm working on this. But I found the config change notification > > must be synchronous in the virtio-blk case, which means the kernel > > still needs to wait for the response from userspace in set_config(). > > Otherwise, some I/Os might still run the old way after we change the > > cache_type in sysfs. > > > > The simple ways to solve this problem are: > > > > 1. Only support read-only config space, disable WCE as you suggested > > 2. Add a return value to set_config() and handle the failure only in > > virtio-blk driver > > 3. Print some warnings after timeout since it only affects the > > dataplane which is under userspace's control > > > > Any suggestions? > > > Let's go without WCE first and make VDUSE work first. We can then think > of a solution for WCE on top. > It's fine with me. Thanks, Yongji
On Mon, May 31, 2021 at 02:19:37PM +0800, Yongji Xie wrote: > Hi Greg, > > Thanks a lot for the review! > > On Mon, May 31, 2021 at 12:56 PM Greg KH <gregkh@linuxfoundation.org> wrote: > > > > On Mon, May 17, 2021 at 05:55:12PM +0800, Xie Yongji wrote: > > > +struct vduse_dev { > > > + struct vduse_vdpa *vdev; > > > + struct device dev; > > > + struct cdev cdev; > > > > You now have 2 reference counted devices controling the lifespace of a > > single structure. A mess that is guaranteed to go wrong. Please never > > do this. > > > > These two are both used by cdev_device_add(). Looks like I didn't find > any problem. Any suggestions? Make one of these dynamic and do not have them both control the lifespan of the structure. > > > + struct vduse_virtqueue *vqs; > > > + struct vduse_iova_domain *domain; > > > + char *name; > > > + struct mutex lock; > > > + spinlock_t msg_lock; > > > + atomic64_t msg_unique; > > > > Why do you need an atomic and a lock? > > > > You are right. We don't need an atomic here. > > > > + wait_queue_head_t waitq; > > > + struct list_head send_list; > > > + struct list_head recv_list; > > > + struct list_head list; > > > + struct vdpa_callback config_cb; > > > + struct work_struct inject; > > > + spinlock_t irq_lock; > > > + unsigned long api_version; > > > + bool connected; > > > + int minor; > > > + u16 vq_size_max; > > > + u32 vq_num; > > > + u32 vq_align; > > > + u32 config_size; > > > + u32 device_id; > > > + u32 vendor_id; > > > +}; > > > + > > > +struct vduse_dev_msg { > > > + struct vduse_dev_request req; > > > + struct vduse_dev_response resp; > > > + struct list_head list; > > > + wait_queue_head_t waitq; > > > + bool completed; > > > +}; > > > + > > > +struct vduse_control { > > > + unsigned long api_version; > > > > u64? > > > > OK. > > > > +}; > > > + > > > +static unsigned long max_bounce_size = (64 * 1024 * 1024); > > > +module_param(max_bounce_size, ulong, 0444); > > > +MODULE_PARM_DESC(max_bounce_size, "Maximum bounce buffer size. (default: 64M)"); > > > + > > > +static unsigned long max_iova_size = (128 * 1024 * 1024); > > > +module_param(max_iova_size, ulong, 0444); > > > +MODULE_PARM_DESC(max_iova_size, "Maximum iova space size (default: 128M)"); > > > + > > > +static bool allow_unsafe_device_emulation; > > > +module_param(allow_unsafe_device_emulation, bool, 0444); > > > +MODULE_PARM_DESC(allow_unsafe_device_emulation, "Allow emulating unsafe device." > > > + " We must make sure the userspace device emulation process is trusted." > > > + " Otherwise, don't enable this option. (default: false)"); > > > + > > > > This is not the 1990's anymore, please never use module parameters, make > > these per-device attributes if you really need them. > > > > These parameters will be used before the device is created. Or do you > mean add some attributes to the control device? You need to do something, as no one can mess with a module parameter easily. Why do you need them at all, shouldn't it "just work" properly with no need for userspace interaction? > > > +static int vduse_init(void) > > > +{ > > > + int ret; > > > + > > > + if (max_bounce_size >= max_iova_size) > > > + return -EINVAL; > > > + > > > + ret = misc_register(&vduse_misc); > > > + if (ret) > > > + return ret; > > > + > > > + vduse_class = class_create(THIS_MODULE, "vduse"); > > > > If you have a misc device, you do not need to create a class at the same > > time. Why are you doing both here? Just stick with the misc device, no > > need for anything else. > > > > The misc device is the control device represented by > /dev/vduse/control. Then a VDUSE device represented by > /dev/vduse/$NAME can be created by the ioctl(VDUSE_CREATE_DEV) on this > control device. Ah. Then how about using the same MAJOR for all of these, and just have the first minor (0) be your control? That happens for other device types (raw, loop, etc.). Or just document this really well please, as it was not obvious what you were doing here. thanks, greg k-h
On Mon, May 31, 2021 at 2:32 PM Greg KH <gregkh@linuxfoundation.org> wrote: > > On Mon, May 31, 2021 at 02:19:37PM +0800, Yongji Xie wrote: > > Hi Greg, > > > > Thanks a lot for the review! > > > > On Mon, May 31, 2021 at 12:56 PM Greg KH <gregkh@linuxfoundation.org> wrote: > > > > > > On Mon, May 17, 2021 at 05:55:12PM +0800, Xie Yongji wrote: > > > > +struct vduse_dev { > > > > + struct vduse_vdpa *vdev; > > > > + struct device dev; > > > > + struct cdev cdev; > > > > > > You now have 2 reference counted devices controling the lifespace of a > > > single structure. A mess that is guaranteed to go wrong. Please never > > > do this. > > > > > > > These two are both used by cdev_device_add(). Looks like I didn't find > > any problem. Any suggestions? > > Make one of these dynamic and do not have them both control the lifespan > of the structure. > I see some comments in cdev_device_add(): "This function should be used whenever the struct cdev and the struct device are members of the same structure whose lifetime is managed by the struct device." So it seems to be ok here? > > > > + struct vduse_virtqueue *vqs; > > > > + struct vduse_iova_domain *domain; > > > > + char *name; > > > > + struct mutex lock; > > > > + spinlock_t msg_lock; > > > > + atomic64_t msg_unique; > > > > > > Why do you need an atomic and a lock? > > > > > > > You are right. We don't need an atomic here. > > > > > > + wait_queue_head_t waitq; > > > > + struct list_head send_list; > > > > + struct list_head recv_list; > > > > + struct list_head list; > > > > + struct vdpa_callback config_cb; > > > > + struct work_struct inject; > > > > + spinlock_t irq_lock; > > > > + unsigned long api_version; > > > > + bool connected; > > > > + int minor; > > > > + u16 vq_size_max; > > > > + u32 vq_num; > > > > + u32 vq_align; > > > > + u32 config_size; > > > > + u32 device_id; > > > > + u32 vendor_id; > > > > +}; > > > > + > > > > +struct vduse_dev_msg { > > > > + struct vduse_dev_request req; > > > > + struct vduse_dev_response resp; > > > > + struct list_head list; > > > > + wait_queue_head_t waitq; > > > > + bool completed; > > > > +}; > > > > + > > > > +struct vduse_control { > > > > + unsigned long api_version; > > > > > > u64? > > > > > > > OK. > > > > > > +}; > > > > + > > > > +static unsigned long max_bounce_size = (64 * 1024 * 1024); > > > > +module_param(max_bounce_size, ulong, 0444); > > > > +MODULE_PARM_DESC(max_bounce_size, "Maximum bounce buffer size. (default: 64M)"); > > > > + > > > > +static unsigned long max_iova_size = (128 * 1024 * 1024); > > > > +module_param(max_iova_size, ulong, 0444); > > > > +MODULE_PARM_DESC(max_iova_size, "Maximum iova space size (default: 128M)"); > > > > + > > > > +static bool allow_unsafe_device_emulation; > > > > +module_param(allow_unsafe_device_emulation, bool, 0444); > > > > +MODULE_PARM_DESC(allow_unsafe_device_emulation, "Allow emulating unsafe device." > > > > + " We must make sure the userspace device emulation process is trusted." > > > > + " Otherwise, don't enable this option. (default: false)"); > > > > + > > > > > > This is not the 1990's anymore, please never use module parameters, make > > > these per-device attributes if you really need them. > > > > > > > These parameters will be used before the device is created. Or do you > > mean add some attributes to the control device? > > You need to do something, as no one can mess with a module parameter > easily. Why do you need them at all, shouldn't it "just work" properly > with no need for userspace interaction? > OK, I get you. It works fine with the default value. So I think it should be ok to remove these parameters before we find a situation that really needs them. > > > > +static int vduse_init(void) > > > > +{ > > > > + int ret; > > > > + > > > > + if (max_bounce_size >= max_iova_size) > > > > + return -EINVAL; > > > > + > > > > + ret = misc_register(&vduse_misc); > > > > + if (ret) > > > > + return ret; > > > > + > > > > + vduse_class = class_create(THIS_MODULE, "vduse"); > > > > > > If you have a misc device, you do not need to create a class at the same > > > time. Why are you doing both here? Just stick with the misc device, no > > > need for anything else. > > > > > > > The misc device is the control device represented by > > /dev/vduse/control. Then a VDUSE device represented by > > /dev/vduse/$NAME can be created by the ioctl(VDUSE_CREATE_DEV) on this > > control device. > > Ah. Then how about using the same MAJOR for all of these, and just have > the first minor (0) be your control? That happens for other device > types (raw, loop, etc.). Or just document this really well please, as > it was not obvious what you were doing here. > OK, I will reserve the first minor (0) for the control device instead. Thanks, Yongji
diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst index 599bd4493944..db44cdabed35 100644 --- a/Documentation/userspace-api/ioctl/ioctl-number.rst +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst @@ -300,6 +300,7 @@ Code Seq# Include File Comments 'z' 10-4F drivers/s390/crypto/zcrypt_api.h conflict! '|' 00-7F linux/media.h 0x80 00-1F linux/fb.h +0x81 00-1F linux/vduse.h 0x89 00-06 arch/x86/include/asm/sockios.h 0x89 0B-DF linux/sockios.h 0x89 E0-EF linux/sockios.h SIOCPROTOPRIVATE range diff --git a/drivers/vdpa/Kconfig b/drivers/vdpa/Kconfig index a503c1b2bfd9..6e23bce6433a 100644 --- a/drivers/vdpa/Kconfig +++ b/drivers/vdpa/Kconfig @@ -33,6 +33,16 @@ config VDPA_SIM_BLOCK vDPA block device simulator which terminates IO request in a memory buffer. +config VDPA_USER + tristate "VDUSE (vDPA Device in Userspace) support" + depends on EVENTFD && MMU && HAS_DMA + select DMA_OPS + select VHOST_IOTLB + select IOMMU_IOVA + help + With VDUSE it is possible to emulate a vDPA Device + in a userspace program. + config IFCVF tristate "Intel IFC VF vDPA driver" depends on PCI_MSI diff --git a/drivers/vdpa/Makefile b/drivers/vdpa/Makefile index 67fe7f3d6943..f02ebed33f19 100644 --- a/drivers/vdpa/Makefile +++ b/drivers/vdpa/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_VDPA) += vdpa.o obj-$(CONFIG_VDPA_SIM) += vdpa_sim/ +obj-$(CONFIG_VDPA_USER) += vdpa_user/ obj-$(CONFIG_IFCVF) += ifcvf/ obj-$(CONFIG_MLX5_VDPA) += mlx5/ obj-$(CONFIG_VP_VDPA) += virtio_pci/ diff --git a/drivers/vdpa/vdpa_user/Makefile b/drivers/vdpa/vdpa_user/Makefile new file mode 100644 index 000000000000..260e0b26af99 --- /dev/null +++ b/drivers/vdpa/vdpa_user/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + +vduse-y := vduse_dev.o iova_domain.o + +obj-$(CONFIG_VDPA_USER) += vduse.o diff --git a/drivers/vdpa/vdpa_user/vduse_dev.c b/drivers/vdpa/vdpa_user/vduse_dev.c new file mode 100644 index 000000000000..9ac4cf100ccd --- /dev/null +++ b/drivers/vdpa/vdpa_user/vduse_dev.c @@ -0,0 +1,1453 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * VDUSE: vDPA Device in Userspace + * + * Copyright (C) 2020-2021 Bytedance Inc. and/or its affiliates. All rights reserved. + * + * Author: Xie Yongji <xieyongji@bytedance.com> + * + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/miscdevice.h> +#include <linux/cdev.h> +#include <linux/device.h> +#include <linux/eventfd.h> +#include <linux/slab.h> +#include <linux/wait.h> +#include <linux/dma-map-ops.h> +#include <linux/poll.h> +#include <linux/file.h> +#include <linux/uio.h> +#include <linux/vdpa.h> +#include <linux/nospec.h> +#include <uapi/linux/vduse.h> +#include <uapi/linux/vdpa.h> +#include <uapi/linux/virtio_config.h> +#include <uapi/linux/virtio_ids.h> +#include <linux/mod_devicetable.h> + +#include "iova_domain.h" + +#define DRV_VERSION "1.0" +#define DRV_AUTHOR "Yongji Xie <xieyongji@bytedance.com>" +#define DRV_DESC "vDPA Device in Userspace" +#define DRV_LICENSE "GPL v2" + +#define VDUSE_DEV_MAX (1U << MINORBITS) + +struct vduse_virtqueue { + u16 index; + bool ready; + spinlock_t kick_lock; + spinlock_t irq_lock; + struct eventfd_ctx *kickfd; + struct vdpa_callback cb; + struct work_struct inject; +}; + +struct vduse_dev; + +struct vduse_vdpa { + struct vdpa_device vdpa; + struct vduse_dev *dev; +}; + +struct vduse_dev { + struct vduse_vdpa *vdev; + struct device dev; + struct cdev cdev; + struct vduse_virtqueue *vqs; + struct vduse_iova_domain *domain; + char *name; + struct mutex lock; + spinlock_t msg_lock; + atomic64_t msg_unique; + wait_queue_head_t waitq; + struct list_head send_list; + struct list_head recv_list; + struct list_head list; + struct vdpa_callback config_cb; + struct work_struct inject; + spinlock_t irq_lock; + unsigned long api_version; + bool connected; + int minor; + u16 vq_size_max; + u32 vq_num; + u32 vq_align; + u32 config_size; + u32 device_id; + u32 vendor_id; +}; + +struct vduse_dev_msg { + struct vduse_dev_request req; + struct vduse_dev_response resp; + struct list_head list; + wait_queue_head_t waitq; + bool completed; +}; + +struct vduse_control { + unsigned long api_version; +}; + +static unsigned long max_bounce_size = (64 * 1024 * 1024); +module_param(max_bounce_size, ulong, 0444); +MODULE_PARM_DESC(max_bounce_size, "Maximum bounce buffer size. (default: 64M)"); + +static unsigned long max_iova_size = (128 * 1024 * 1024); +module_param(max_iova_size, ulong, 0444); +MODULE_PARM_DESC(max_iova_size, "Maximum iova space size (default: 128M)"); + +static bool allow_unsafe_device_emulation; +module_param(allow_unsafe_device_emulation, bool, 0444); +MODULE_PARM_DESC(allow_unsafe_device_emulation, "Allow emulating unsafe device." + " We must make sure the userspace device emulation process is trusted." + " Otherwise, don't enable this option. (default: false)"); + +static DEFINE_MUTEX(vduse_lock); +static LIST_HEAD(vduse_devs); +static DEFINE_IDA(vduse_ida); + +static dev_t vduse_major; +static struct class *vduse_class; +static struct workqueue_struct *vduse_irq_wq; + +static unsigned int allowed_device_id[] = { + VIRTIO_ID_NET, VIRTIO_ID_BLOCK, + VIRTIO_ID_SCSI, VIRTIO_ID_FS, +}; + +static inline struct vduse_dev *vdpa_to_vduse(struct vdpa_device *vdpa) +{ + struct vduse_vdpa *vdev = container_of(vdpa, struct vduse_vdpa, vdpa); + + return vdev->dev; +} + +static inline struct vduse_dev *dev_to_vduse(struct device *dev) +{ + struct vdpa_device *vdpa = dev_to_vdpa(dev); + + return vdpa_to_vduse(vdpa); +} + +static struct vduse_dev_msg *vduse_find_msg(struct list_head *head, + uint32_t request_id) +{ + struct vduse_dev_msg *tmp, *msg = NULL; + + list_for_each_entry(tmp, head, list) { + if (tmp->req.request_id == request_id) { + msg = tmp; + list_del(&tmp->list); + break; + } + } + + return msg; +} + +static struct vduse_dev_msg *vduse_dequeue_msg(struct list_head *head) +{ + struct vduse_dev_msg *msg = NULL; + + if (!list_empty(head)) { + msg = list_first_entry(head, struct vduse_dev_msg, list); + list_del(&msg->list); + } + + return msg; +} + +static void vduse_enqueue_msg(struct list_head *head, + struct vduse_dev_msg *msg) +{ + list_add_tail(&msg->list, head); +} + +static int vduse_dev_msg_sync(struct vduse_dev *dev, + struct vduse_dev_msg *msg) +{ + init_waitqueue_head(&msg->waitq); + spin_lock(&dev->msg_lock); + vduse_enqueue_msg(&dev->send_list, msg); + wake_up(&dev->waitq); + spin_unlock(&dev->msg_lock); + wait_event_killable(msg->waitq, msg->completed); + spin_lock(&dev->msg_lock); + if (!msg->completed) { + list_del(&msg->list); + msg->resp.result = VDUSE_REQUEST_FAILED; + } + spin_unlock(&dev->msg_lock); + + return (msg->resp.result == VDUSE_REQUEST_OK) ? 0 : -1; +} + +static u32 vduse_dev_get_request_id(struct vduse_dev *dev) +{ + return atomic64_fetch_inc(&dev->msg_unique); +} + +static u64 vduse_dev_get_features(struct vduse_dev *dev) +{ + struct vduse_dev_msg msg = { 0 }; + + msg.req.type = VDUSE_GET_FEATURES; + msg.req.request_id = vduse_dev_get_request_id(dev); + + if (WARN_ON(vduse_dev_msg_sync(dev, &msg) != 0)) + return 0; + + return msg.resp.f.features; +} + +static int vduse_dev_set_features(struct vduse_dev *dev, u64 features) +{ + struct vduse_dev_msg msg = { 0 }; + + msg.req.type = VDUSE_SET_FEATURES; + msg.req.request_id = vduse_dev_get_request_id(dev); + msg.req.f.features = features; + + return vduse_dev_msg_sync(dev, &msg); +} + +static u8 vduse_dev_get_status(struct vduse_dev *dev) +{ + struct vduse_dev_msg msg = { 0 }; + + msg.req.type = VDUSE_GET_STATUS; + msg.req.request_id = vduse_dev_get_request_id(dev); + + if (WARN_ON(vduse_dev_msg_sync(dev, &msg) != 0)) + return 0; + + return msg.resp.s.status; +} + +static void vduse_dev_set_status(struct vduse_dev *dev, u8 status) +{ + struct vduse_dev_msg msg = { 0 }; + + msg.req.type = VDUSE_SET_STATUS; + msg.req.request_id = vduse_dev_get_request_id(dev); + msg.req.s.status = status; + + WARN_ON(vduse_dev_msg_sync(dev, &msg) != 0); +} + +static void vduse_dev_get_config(struct vduse_dev *dev, unsigned int offset, + void *buf, unsigned int len) +{ + struct vduse_dev_msg msg = { 0 }; + unsigned int sz; + + while (len) { + sz = min_t(unsigned int, len, sizeof(msg.req.config.data)); + msg.req.type = VDUSE_GET_CONFIG; + msg.req.request_id = vduse_dev_get_request_id(dev); + msg.req.config.offset = offset; + msg.req.config.len = sz; + if (WARN_ON(vduse_dev_msg_sync(dev, &msg) != 0)) + break; + + memcpy(buf, msg.resp.config.data, sz); + buf += sz; + offset += sz; + len -= sz; + } +} + +static void vduse_dev_set_config(struct vduse_dev *dev, unsigned int offset, + const void *buf, unsigned int len) +{ + struct vduse_dev_msg msg = { 0 }; + unsigned int sz; + + while (len) { + sz = min_t(unsigned int, len, sizeof(msg.req.config.data)); + msg.req.type = VDUSE_SET_CONFIG; + msg.req.request_id = vduse_dev_get_request_id(dev); + msg.req.config.offset = offset; + msg.req.config.len = sz; + memcpy(msg.req.config.data, buf, sz); + if (WARN_ON(vduse_dev_msg_sync(dev, &msg) != 0)) + break; + + buf += sz; + offset += sz; + len -= sz; + } +} + +static void vduse_dev_set_vq_num(struct vduse_dev *dev, + struct vduse_virtqueue *vq, u32 num) +{ + struct vduse_dev_msg msg = { 0 }; + + msg.req.type = VDUSE_SET_VQ_NUM; + msg.req.request_id = vduse_dev_get_request_id(dev); + msg.req.vq_num.index = vq->index; + msg.req.vq_num.num = num; + + WARN_ON(vduse_dev_msg_sync(dev, &msg) != 0); +} + +static int vduse_dev_set_vq_addr(struct vduse_dev *dev, + struct vduse_virtqueue *vq, u64 desc_addr, + u64 driver_addr, u64 device_addr) +{ + struct vduse_dev_msg msg = { 0 }; + + msg.req.type = VDUSE_SET_VQ_ADDR; + msg.req.request_id = vduse_dev_get_request_id(dev); + msg.req.vq_addr.index = vq->index; + msg.req.vq_addr.desc_addr = desc_addr; + msg.req.vq_addr.driver_addr = driver_addr; + msg.req.vq_addr.device_addr = device_addr; + + return vduse_dev_msg_sync(dev, &msg); +} + +static void vduse_dev_set_vq_ready(struct vduse_dev *dev, + struct vduse_virtqueue *vq, bool ready) +{ + struct vduse_dev_msg msg = { 0 }; + + msg.req.type = VDUSE_SET_VQ_READY; + msg.req.request_id = vduse_dev_get_request_id(dev); + msg.req.vq_ready.index = vq->index; + msg.req.vq_ready.ready = ready; + + WARN_ON(vduse_dev_msg_sync(dev, &msg) != 0); +} + +static bool vduse_dev_get_vq_ready(struct vduse_dev *dev, + struct vduse_virtqueue *vq) +{ + struct vduse_dev_msg msg = { 0 }; + + msg.req.type = VDUSE_GET_VQ_READY; + msg.req.request_id = vduse_dev_get_request_id(dev); + msg.req.vq_ready.index = vq->index; + if (WARN_ON(vduse_dev_msg_sync(dev, &msg))) + return false; + + return msg.resp.vq_ready.ready; +} + +static int vduse_dev_get_vq_state(struct vduse_dev *dev, + struct vduse_virtqueue *vq, + struct vdpa_vq_state *state) +{ + struct vduse_dev_msg msg = { 0 }; + int ret; + + msg.req.type = VDUSE_GET_VQ_STATE; + msg.req.request_id = vduse_dev_get_request_id(dev); + msg.req.vq_state.index = vq->index; + + ret = vduse_dev_msg_sync(dev, &msg); + if (!ret) + state->avail_index = msg.resp.vq_state.avail_idx; + + return ret; +} + +static int vduse_dev_set_vq_state(struct vduse_dev *dev, + struct vduse_virtqueue *vq, + const struct vdpa_vq_state *state) +{ + struct vduse_dev_msg msg = { 0 }; + + msg.req.type = VDUSE_SET_VQ_STATE; + msg.req.request_id = vduse_dev_get_request_id(dev); + msg.req.vq_state.index = vq->index; + msg.req.vq_state.avail_idx = state->avail_index; + + return vduse_dev_msg_sync(dev, &msg); +} + +static int vduse_dev_update_iotlb(struct vduse_dev *dev, + u64 start, u64 last) +{ + struct vduse_dev_msg msg = { 0 }; + + if (last < start) + return -EINVAL; + + msg.req.type = VDUSE_UPDATE_IOTLB; + msg.req.request_id = vduse_dev_get_request_id(dev); + msg.req.iova.start = start; + msg.req.iova.last = last; + + return vduse_dev_msg_sync(dev, &msg); +} + +static ssize_t vduse_dev_read_iter(struct kiocb *iocb, struct iov_iter *to) +{ + struct file *file = iocb->ki_filp; + struct vduse_dev *dev = file->private_data; + struct vduse_dev_msg *msg; + int size = sizeof(struct vduse_dev_request); + ssize_t ret; + + if (iov_iter_count(to) < size) + return -EINVAL; + + spin_lock(&dev->msg_lock); + while (1) { + msg = vduse_dequeue_msg(&dev->send_list); + if (msg) + break; + + ret = -EAGAIN; + if (file->f_flags & O_NONBLOCK) + goto unlock; + + spin_unlock(&dev->msg_lock); + ret = wait_event_interruptible_exclusive(dev->waitq, + !list_empty(&dev->send_list)); + if (ret) + return ret; + + spin_lock(&dev->msg_lock); + } + spin_unlock(&dev->msg_lock); + ret = copy_to_iter(&msg->req, size, to); + spin_lock(&dev->msg_lock); + if (ret != size) { + ret = -EFAULT; + vduse_enqueue_msg(&dev->send_list, msg); + goto unlock; + } + vduse_enqueue_msg(&dev->recv_list, msg); +unlock: + spin_unlock(&dev->msg_lock); + + return ret; +} + +static ssize_t vduse_dev_write_iter(struct kiocb *iocb, struct iov_iter *from) +{ + struct file *file = iocb->ki_filp; + struct vduse_dev *dev = file->private_data; + struct vduse_dev_response resp; + struct vduse_dev_msg *msg; + size_t ret; + + ret = copy_from_iter(&resp, sizeof(resp), from); + if (ret != sizeof(resp)) + return -EINVAL; + + spin_lock(&dev->msg_lock); + msg = vduse_find_msg(&dev->recv_list, resp.request_id); + if (!msg) { + ret = -ENOENT; + goto unlock; + } + + memcpy(&msg->resp, &resp, sizeof(resp)); + msg->completed = 1; + wake_up(&msg->waitq); +unlock: + spin_unlock(&dev->msg_lock); + + return ret; +} + +static __poll_t vduse_dev_poll(struct file *file, poll_table *wait) +{ + struct vduse_dev *dev = file->private_data; + __poll_t mask = 0; + + poll_wait(file, &dev->waitq, wait); + + if (!list_empty(&dev->send_list)) + mask |= EPOLLIN | EPOLLRDNORM; + if (!list_empty(&dev->recv_list)) + mask |= EPOLLOUT | EPOLLWRNORM; + + return mask; +} + +static void vduse_dev_reset(struct vduse_dev *dev) +{ + int i; + struct vduse_iova_domain *domain = dev->domain; + + /* The coherent mappings are handled in vduse_dev_free_coherent() */ + if (domain->bounce_map) { + vduse_domain_reset_bounce_map(domain); + vduse_dev_update_iotlb(dev, 0ULL, domain->bounce_size - 1); + } + + spin_lock(&dev->irq_lock); + dev->config_cb.callback = NULL; + dev->config_cb.private = NULL; + spin_unlock(&dev->irq_lock); + + for (i = 0; i < dev->vq_num; i++) { + struct vduse_virtqueue *vq = &dev->vqs[i]; + + spin_lock(&vq->irq_lock); + vq->ready = false; + vq->cb.callback = NULL; + vq->cb.private = NULL; + spin_unlock(&vq->irq_lock); + } +} + +static int vduse_vdpa_set_vq_address(struct vdpa_device *vdpa, u16 idx, + u64 desc_area, u64 driver_area, + u64 device_area) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + struct vduse_virtqueue *vq = &dev->vqs[idx]; + + return vduse_dev_set_vq_addr(dev, vq, desc_area, + driver_area, device_area); +} + +static void vduse_vdpa_kick_vq(struct vdpa_device *vdpa, u16 idx) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + struct vduse_virtqueue *vq = &dev->vqs[idx]; + + spin_lock(&vq->kick_lock); + if (vq->ready && vq->kickfd) + eventfd_signal(vq->kickfd, 1); + spin_unlock(&vq->kick_lock); +} + +static void vduse_vdpa_set_vq_cb(struct vdpa_device *vdpa, u16 idx, + struct vdpa_callback *cb) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + struct vduse_virtqueue *vq = &dev->vqs[idx]; + + spin_lock(&vq->irq_lock); + vq->cb.callback = cb->callback; + vq->cb.private = cb->private; + spin_unlock(&vq->irq_lock); +} + +static void vduse_vdpa_set_vq_num(struct vdpa_device *vdpa, u16 idx, u32 num) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + struct vduse_virtqueue *vq = &dev->vqs[idx]; + + vduse_dev_set_vq_num(dev, vq, num); +} + +static void vduse_vdpa_set_vq_ready(struct vdpa_device *vdpa, + u16 idx, bool ready) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + struct vduse_virtqueue *vq = &dev->vqs[idx]; + + vduse_dev_set_vq_ready(dev, vq, ready); + vq->ready = ready; +} + +static bool vduse_vdpa_get_vq_ready(struct vdpa_device *vdpa, u16 idx) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + struct vduse_virtqueue *vq = &dev->vqs[idx]; + + vq->ready = vduse_dev_get_vq_ready(dev, vq); + + return vq->ready; +} + +static int vduse_vdpa_set_vq_state(struct vdpa_device *vdpa, u16 idx, + const struct vdpa_vq_state *state) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + struct vduse_virtqueue *vq = &dev->vqs[idx]; + + return vduse_dev_set_vq_state(dev, vq, state); +} + +static int vduse_vdpa_get_vq_state(struct vdpa_device *vdpa, u16 idx, + struct vdpa_vq_state *state) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + struct vduse_virtqueue *vq = &dev->vqs[idx]; + + return vduse_dev_get_vq_state(dev, vq, state); +} + +static u32 vduse_vdpa_get_vq_align(struct vdpa_device *vdpa) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + + return dev->vq_align; +} + +static u64 vduse_vdpa_get_features(struct vdpa_device *vdpa) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + + return vduse_dev_get_features(dev); +} + +static int vduse_vdpa_set_features(struct vdpa_device *vdpa, u64 features) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + + if (!(features & (1ULL << VIRTIO_F_ACCESS_PLATFORM))) + return -EINVAL; + + return vduse_dev_set_features(dev, features); +} + +static void vduse_vdpa_set_config_cb(struct vdpa_device *vdpa, + struct vdpa_callback *cb) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + + spin_lock(&dev->irq_lock); + dev->config_cb.callback = cb->callback; + dev->config_cb.private = cb->private; + spin_unlock(&dev->irq_lock); +} + +static u16 vduse_vdpa_get_vq_num_max(struct vdpa_device *vdpa) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + + return dev->vq_size_max; +} + +static u32 vduse_vdpa_get_device_id(struct vdpa_device *vdpa) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + + return dev->device_id; +} + +static u32 vduse_vdpa_get_vendor_id(struct vdpa_device *vdpa) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + + return dev->vendor_id; +} + +static u8 vduse_vdpa_get_status(struct vdpa_device *vdpa) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + + return vduse_dev_get_status(dev); +} + +static void vduse_vdpa_set_status(struct vdpa_device *vdpa, u8 status) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + + vduse_dev_set_status(dev, status); + + if (status == 0) + vduse_dev_reset(dev); +} + +static size_t vduse_vdpa_get_config_size(struct vdpa_device *vdpa) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + + return dev->config_size; +} + +static void vduse_vdpa_get_config(struct vdpa_device *vdpa, unsigned int offset, + void *buf, unsigned int len) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + + vduse_dev_get_config(dev, offset, buf, len); +} + +static void vduse_vdpa_set_config(struct vdpa_device *vdpa, unsigned int offset, + const void *buf, unsigned int len) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + + vduse_dev_set_config(dev, offset, buf, len); +} + +static int vduse_vdpa_set_map(struct vdpa_device *vdpa, + struct vhost_iotlb *iotlb) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + int ret; + + ret = vduse_domain_set_map(dev->domain, iotlb); + vduse_dev_update_iotlb(dev, 0ULL, ULLONG_MAX); + + return ret; +} + +static void vduse_vdpa_free(struct vdpa_device *vdpa) +{ + struct vduse_dev *dev = vdpa_to_vduse(vdpa); + + WARN_ON(!list_empty(&dev->send_list)); + WARN_ON(!list_empty(&dev->recv_list)); + dev->vdev = NULL; +} + +static const struct vdpa_config_ops vduse_vdpa_config_ops = { + .set_vq_address = vduse_vdpa_set_vq_address, + .kick_vq = vduse_vdpa_kick_vq, + .set_vq_cb = vduse_vdpa_set_vq_cb, + .set_vq_num = vduse_vdpa_set_vq_num, + .set_vq_ready = vduse_vdpa_set_vq_ready, + .get_vq_ready = vduse_vdpa_get_vq_ready, + .set_vq_state = vduse_vdpa_set_vq_state, + .get_vq_state = vduse_vdpa_get_vq_state, + .get_vq_align = vduse_vdpa_get_vq_align, + .get_features = vduse_vdpa_get_features, + .set_features = vduse_vdpa_set_features, + .set_config_cb = vduse_vdpa_set_config_cb, + .get_vq_num_max = vduse_vdpa_get_vq_num_max, + .get_device_id = vduse_vdpa_get_device_id, + .get_vendor_id = vduse_vdpa_get_vendor_id, + .get_status = vduse_vdpa_get_status, + .set_status = vduse_vdpa_set_status, + .get_config_size = vduse_vdpa_get_config_size, + .get_config = vduse_vdpa_get_config, + .set_config = vduse_vdpa_set_config, + .set_map = vduse_vdpa_set_map, + .free = vduse_vdpa_free, +}; + +static dma_addr_t vduse_dev_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction dir, + unsigned long attrs) +{ + struct vduse_dev *vdev = dev_to_vduse(dev); + struct vduse_iova_domain *domain = vdev->domain; + + return vduse_domain_map_page(domain, page, offset, size, dir, attrs); +} + +static void vduse_dev_unmap_page(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction dir, + unsigned long attrs) +{ + struct vduse_dev *vdev = dev_to_vduse(dev); + struct vduse_iova_domain *domain = vdev->domain; + + return vduse_domain_unmap_page(domain, dma_addr, size, dir, attrs); +} + +static void *vduse_dev_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_addr, gfp_t flag, + unsigned long attrs) +{ + struct vduse_dev *vdev = dev_to_vduse(dev); + struct vduse_iova_domain *domain = vdev->domain; + unsigned long iova; + void *addr; + + *dma_addr = DMA_MAPPING_ERROR; + addr = vduse_domain_alloc_coherent(domain, size, + (dma_addr_t *)&iova, flag, attrs); + if (!addr) + return NULL; + + *dma_addr = (dma_addr_t)iova; + vduse_dev_update_iotlb(vdev, iova, iova + size - 1); + + return addr; +} + +static void vduse_dev_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_addr, + unsigned long attrs) +{ + struct vduse_dev *vdev = dev_to_vduse(dev); + struct vduse_iova_domain *domain = vdev->domain; + unsigned long start = (unsigned long)dma_addr; + unsigned long last = start + size - 1; + + vduse_domain_free_coherent(domain, size, vaddr, dma_addr, attrs); + vduse_dev_update_iotlb(vdev, start, last); +} + +static size_t vduse_dev_max_mapping_size(struct device *dev) +{ + struct vduse_dev *vdev = dev_to_vduse(dev); + struct vduse_iova_domain *domain = vdev->domain; + + return domain->bounce_size; +} + +static const struct dma_map_ops vduse_dev_dma_ops = { + .map_page = vduse_dev_map_page, + .unmap_page = vduse_dev_unmap_page, + .alloc = vduse_dev_alloc_coherent, + .free = vduse_dev_free_coherent, + .max_mapping_size = vduse_dev_max_mapping_size, +}; + +static unsigned int perm_to_file_flags(u8 perm) +{ + unsigned int flags = 0; + + switch (perm) { + case VDUSE_ACCESS_WO: + flags |= O_WRONLY; + break; + case VDUSE_ACCESS_RO: + flags |= O_RDONLY; + break; + case VDUSE_ACCESS_RW: + flags |= O_RDWR; + break; + default: + WARN(1, "invalidate vhost IOTLB permission\n"); + break; + } + + return flags; +} + +static int vduse_kickfd_setup(struct vduse_dev *dev, + struct vduse_vq_eventfd *eventfd) +{ + struct eventfd_ctx *ctx = NULL; + struct vduse_virtqueue *vq; + u32 index; + + if (eventfd->index >= dev->vq_num) + return -EINVAL; + + index = array_index_nospec(eventfd->index, dev->vq_num); + vq = &dev->vqs[index]; + if (eventfd->fd >= 0) { + ctx = eventfd_ctx_fdget(eventfd->fd); + if (IS_ERR(ctx)) + return PTR_ERR(ctx); + } else if (eventfd->fd != VDUSE_EVENTFD_DEASSIGN) + return 0; + + spin_lock(&vq->kick_lock); + if (vq->kickfd) + eventfd_ctx_put(vq->kickfd); + vq->kickfd = ctx; + spin_unlock(&vq->kick_lock); + + return 0; +} + +static void vduse_dev_irq_inject(struct work_struct *work) +{ + struct vduse_dev *dev = container_of(work, struct vduse_dev, inject); + + spin_lock_irq(&dev->irq_lock); + if (dev->config_cb.callback) + dev->config_cb.callback(dev->config_cb.private); + spin_unlock_irq(&dev->irq_lock); +} + +static void vduse_vq_irq_inject(struct work_struct *work) +{ + struct vduse_virtqueue *vq = container_of(work, + struct vduse_virtqueue, inject); + + spin_lock_irq(&vq->irq_lock); + if (vq->ready && vq->cb.callback) + vq->cb.callback(vq->cb.private); + spin_unlock_irq(&vq->irq_lock); +} + +static long vduse_dev_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + struct vduse_dev *dev = file->private_data; + void __user *argp = (void __user *)arg; + int ret; + + switch (cmd) { + case VDUSE_IOTLB_GET_FD: { + struct vduse_iotlb_entry entry; + struct vhost_iotlb_map *map; + struct vdpa_map_file *map_file; + struct vduse_iova_domain *domain = dev->domain; + struct file *f = NULL; + + ret = -EFAULT; + if (copy_from_user(&entry, argp, sizeof(entry))) + break; + + ret = -EINVAL; + if (entry.start > entry.last) + break; + + spin_lock(&domain->iotlb_lock); + map = vhost_iotlb_itree_first(domain->iotlb, + entry.start, entry.last); + if (map) { + map_file = (struct vdpa_map_file *)map->opaque; + f = get_file(map_file->file); + entry.offset = map_file->offset; + entry.start = map->start; + entry.last = map->last; + entry.perm = map->perm; + } + spin_unlock(&domain->iotlb_lock); + ret = -EINVAL; + if (!f) + break; + + ret = -EFAULT; + if (copy_to_user(argp, &entry, sizeof(entry))) { + fput(f); + break; + } + ret = receive_fd(f, perm_to_file_flags(entry.perm)); + fput(f); + break; + } + case VDUSE_VQ_SETUP_KICKFD: { + struct vduse_vq_eventfd eventfd; + + ret = -EFAULT; + if (copy_from_user(&eventfd, argp, sizeof(eventfd))) + break; + + ret = vduse_kickfd_setup(dev, &eventfd); + break; + } + case VDUSE_INJECT_VQ_IRQ: { + u32 vq_index; + + ret = -EFAULT; + if (copy_from_user(&vq_index, argp, sizeof(u32))) + break; + + ret = -EINVAL; + if (vq_index >= dev->vq_num) + break; + + ret = 0; + vq_index = array_index_nospec(vq_index, dev->vq_num); + queue_work(vduse_irq_wq, &dev->vqs[vq_index].inject); + break; + } + case VDUSE_INJECT_CONFIG_IRQ: + ret = 0; + queue_work(vduse_irq_wq, &dev->inject); + break; + default: + ret = -ENOIOCTLCMD; + break; + } + + return ret; +} + +static int vduse_dev_release(struct inode *inode, struct file *file) +{ + struct vduse_dev *dev = file->private_data; + struct vduse_dev_msg *msg; + int i; + + for (i = 0; i < dev->vq_num; i++) { + struct vduse_virtqueue *vq = &dev->vqs[i]; + + spin_lock(&vq->kick_lock); + if (vq->kickfd) + eventfd_ctx_put(vq->kickfd); + vq->kickfd = NULL; + spin_unlock(&vq->kick_lock); + } + + spin_lock(&dev->msg_lock); + /* Make sure the inflight messages can processed after reconncection */ + while ((msg = vduse_dequeue_msg(&dev->recv_list))) + vduse_enqueue_msg(&dev->send_list, msg); + spin_unlock(&dev->msg_lock); + + dev->connected = false; + + return 0; +} + +static int vduse_dev_open(struct inode *inode, struct file *file) +{ + struct vduse_dev *dev = container_of(inode->i_cdev, + struct vduse_dev, cdev); + int ret = -EBUSY; + + mutex_lock(&dev->lock); + if (dev->connected) + goto unlock; + + ret = 0; + dev->connected = true; + file->private_data = dev; +unlock: + mutex_unlock(&dev->lock); + + return ret; +} + +static const struct file_operations vduse_dev_fops = { + .owner = THIS_MODULE, + .open = vduse_dev_open, + .release = vduse_dev_release, + .read_iter = vduse_dev_read_iter, + .write_iter = vduse_dev_write_iter, + .poll = vduse_dev_poll, + .unlocked_ioctl = vduse_dev_ioctl, + .compat_ioctl = compat_ptr_ioctl, + .llseek = noop_llseek, +}; + +static struct vduse_dev *vduse_dev_create(void) +{ + struct vduse_dev *dev = kzalloc(sizeof(*dev), GFP_KERNEL); + + if (!dev) + return NULL; + + mutex_init(&dev->lock); + spin_lock_init(&dev->msg_lock); + INIT_LIST_HEAD(&dev->send_list); + INIT_LIST_HEAD(&dev->recv_list); + atomic64_set(&dev->msg_unique, 0); + spin_lock_init(&dev->irq_lock); + + INIT_WORK(&dev->inject, vduse_dev_irq_inject); + init_waitqueue_head(&dev->waitq); + + return dev; +} + +static void vduse_dev_destroy(struct vduse_dev *dev) +{ + kfree(dev); +} + +static struct vduse_dev *vduse_find_dev(const char *name) +{ + struct vduse_dev *tmp, *dev = NULL; + + list_for_each_entry(tmp, &vduse_devs, list) { + if (!strcmp(tmp->name, name)) { + dev = tmp; + break; + } + } + return dev; +} + +static int vduse_destroy_dev(char *name) +{ + struct vduse_dev *dev = vduse_find_dev(name); + + if (!dev) + return -EINVAL; + + mutex_lock(&dev->lock); + if (dev->vdev || dev->connected) { + mutex_unlock(&dev->lock); + return -EBUSY; + } + dev->connected = true; + mutex_unlock(&dev->lock); + + list_del(&dev->list); + cdev_device_del(&dev->cdev, &dev->dev); + put_device(&dev->dev); + module_put(THIS_MODULE); + + return 0; +} + +static void vduse_release_dev(struct device *device) +{ + struct vduse_dev *dev = + container_of(device, struct vduse_dev, dev); + + ida_simple_remove(&vduse_ida, dev->minor); + kfree(dev->vqs); + vduse_domain_destroy(dev->domain); + kfree(dev->name); + vduse_dev_destroy(dev); +} + +static bool device_is_allowed(unsigned int device_id) +{ + int i; + + if (allow_unsafe_device_emulation) + return true; + + for (i = 0; i < ARRAY_SIZE(allowed_device_id); i++) { + if (allowed_device_id[i] == device_id) + return true; + } + return false; +} + +static int vduse_create_dev(struct vduse_dev_config *config, + unsigned long api_version) +{ + int i, ret = -ENOMEM; + struct vduse_dev *dev; + + if (config->bounce_size > max_bounce_size) + return -EINVAL; + + if (config->vq_align > PAGE_SIZE) + return -EINVAL; + + if (!device_is_allowed(config->device_id)) + return -EINVAL; + + if (vduse_find_dev(config->name)) + return -EEXIST; + + dev = vduse_dev_create(); + if (!dev) + return -ENOMEM; + + dev->api_version = api_version; + dev->device_id = config->device_id; + dev->vendor_id = config->vendor_id; + dev->name = kstrdup(config->name, GFP_KERNEL); + if (!dev->name) + goto err_str; + + dev->domain = vduse_domain_create(max_iova_size - 1, + config->bounce_size); + if (!dev->domain) + goto err_domain; + + dev->config_size = config->config_size; + dev->vq_align = config->vq_align; + dev->vq_size_max = config->vq_size_max; + dev->vq_num = config->vq_num; + dev->vqs = kcalloc(dev->vq_num, sizeof(*dev->vqs), GFP_KERNEL); + if (!dev->vqs) + goto err_vqs; + + for (i = 0; i < dev->vq_num; i++) { + dev->vqs[i].index = i; + INIT_WORK(&dev->vqs[i].inject, vduse_vq_irq_inject); + spin_lock_init(&dev->vqs[i].kick_lock); + spin_lock_init(&dev->vqs[i].irq_lock); + } + + ret = ida_simple_get(&vduse_ida, 0, VDUSE_DEV_MAX, GFP_KERNEL); + if (ret < 0) + goto err_ida; + + dev->minor = ret; + device_initialize(&dev->dev); + dev->dev.release = vduse_release_dev; + dev->dev.class = vduse_class; + dev->dev.devt = MKDEV(MAJOR(vduse_major), dev->minor); + ret = dev_set_name(&dev->dev, "%s", config->name); + if (ret) + goto err; + + cdev_init(&dev->cdev, &vduse_dev_fops); + dev->cdev.owner = THIS_MODULE; + + ret = cdev_device_add(&dev->cdev, &dev->dev); + if (ret) + goto err; + + list_add(&dev->list, &vduse_devs); + __module_get(THIS_MODULE); + + return 0; +err_ida: + kfree(dev->vqs); +err_vqs: + vduse_domain_destroy(dev->domain); +err_domain: + kfree(dev->name); +err_str: + vduse_dev_destroy(dev); + return ret; +err: + put_device(&dev->dev); + return ret; +} + +static long vduse_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int ret; + void __user *argp = (void __user *)arg; + struct vduse_control *control = file->private_data; + + mutex_lock(&vduse_lock); + switch (cmd) { + case VDUSE_GET_API_VERSION: + ret = control->api_version; + break; + case VDUSE_SET_API_VERSION: + ret = -EINVAL; + if (arg > VDUSE_API_VERSION) + break; + + ret = 0; + control->api_version = arg; + break; + case VDUSE_CREATE_DEV: { + struct vduse_dev_config config; + + ret = -EFAULT; + if (copy_from_user(&config, argp, sizeof(config))) + break; + + ret = vduse_create_dev(&config, control->api_version); + break; + } + case VDUSE_DESTROY_DEV: { + char name[VDUSE_NAME_MAX]; + + ret = -EFAULT; + if (copy_from_user(name, argp, VDUSE_NAME_MAX)) + break; + + ret = vduse_destroy_dev(name); + break; + } + default: + ret = -EINVAL; + break; + } + mutex_unlock(&vduse_lock); + + return ret; +} + +static int vduse_release(struct inode *inode, struct file *file) +{ + struct vduse_control *control = file->private_data; + + kfree(control); + return 0; +} + +static int vduse_open(struct inode *inode, struct file *file) +{ + struct vduse_control *control; + + control = kmalloc(sizeof(struct vduse_control), GFP_KERNEL); + if (!control) + return -ENOMEM; + + control->api_version = VDUSE_API_VERSION; + file->private_data = control; + + return 0; +} + +static const struct file_operations vduse_fops = { + .owner = THIS_MODULE, + .open = vduse_open, + .release = vduse_release, + .unlocked_ioctl = vduse_ioctl, + .compat_ioctl = compat_ptr_ioctl, + .llseek = noop_llseek, +}; + +static char *vduse_devnode(struct device *dev, umode_t *mode) +{ + return kasprintf(GFP_KERNEL, "vduse/%s", dev_name(dev)); +} + +static struct miscdevice vduse_misc = { + .fops = &vduse_fops, + .minor = MISC_DYNAMIC_MINOR, + .name = "vduse", + .nodename = "vduse/control", +}; + +static void vduse_mgmtdev_release(struct device *dev) +{ +} + +static struct device vduse_mgmtdev = { + .init_name = "vduse", + .release = vduse_mgmtdev_release, +}; + +static struct vdpa_mgmt_dev mgmt_dev; + +static int vduse_dev_init_vdpa(struct vduse_dev *dev, const char *name) +{ + struct vduse_vdpa *vdev; + int ret; + + if (dev->vdev) + return -EEXIST; + + vdev = vdpa_alloc_device(struct vduse_vdpa, vdpa, &dev->dev, + &vduse_vdpa_config_ops, name, true); + if (!vdev) + return -ENOMEM; + + dev->vdev = vdev; + vdev->dev = dev; + vdev->vdpa.dev.dma_mask = &vdev->vdpa.dev.coherent_dma_mask; + ret = dma_set_mask_and_coherent(&vdev->vdpa.dev, DMA_BIT_MASK(64)); + if (ret) { + put_device(&vdev->vdpa.dev); + return ret; + } + set_dma_ops(&vdev->vdpa.dev, &vduse_dev_dma_ops); + vdev->vdpa.dma_dev = &vdev->vdpa.dev; + vdev->vdpa.mdev = &mgmt_dev; + + return 0; +} + +static int vdpa_dev_add(struct vdpa_mgmt_dev *mdev, const char *name) +{ + struct vduse_dev *dev; + int ret; + + mutex_lock(&vduse_lock); + dev = vduse_find_dev(name); + if (!dev) { + mutex_unlock(&vduse_lock); + return -EINVAL; + } + ret = vduse_dev_init_vdpa(dev, name); + mutex_unlock(&vduse_lock); + if (ret) + return ret; + + ret = _vdpa_register_device(&dev->vdev->vdpa, dev->vq_num); + if (ret) { + put_device(&dev->vdev->vdpa.dev); + return ret; + } + + return 0; +} + +static void vdpa_dev_del(struct vdpa_mgmt_dev *mdev, struct vdpa_device *dev) +{ + _vdpa_unregister_device(dev); +} + +static const struct vdpa_mgmtdev_ops vdpa_dev_mgmtdev_ops = { + .dev_add = vdpa_dev_add, + .dev_del = vdpa_dev_del, +}; + +static struct virtio_device_id id_table[] = { + { VIRTIO_DEV_ANY_ID, VIRTIO_DEV_ANY_ID }, + { 0 }, +}; + +static struct vdpa_mgmt_dev mgmt_dev = { + .device = &vduse_mgmtdev, + .id_table = id_table, + .ops = &vdpa_dev_mgmtdev_ops, +}; + +static int vduse_mgmtdev_init(void) +{ + int ret; + + ret = device_register(&vduse_mgmtdev); + if (ret) + return ret; + + ret = vdpa_mgmtdev_register(&mgmt_dev); + if (ret) + goto err; + + return 0; +err: + device_unregister(&vduse_mgmtdev); + return ret; +} + +static void vduse_mgmtdev_exit(void) +{ + vdpa_mgmtdev_unregister(&mgmt_dev); + device_unregister(&vduse_mgmtdev); +} + +static int vduse_init(void) +{ + int ret; + + if (max_bounce_size >= max_iova_size) + return -EINVAL; + + ret = misc_register(&vduse_misc); + if (ret) + return ret; + + vduse_class = class_create(THIS_MODULE, "vduse"); + if (IS_ERR(vduse_class)) { + ret = PTR_ERR(vduse_class); + goto err_class; + } + vduse_class->devnode = vduse_devnode; + + ret = alloc_chrdev_region(&vduse_major, 0, VDUSE_DEV_MAX, "vduse"); + if (ret) + goto err_chardev; + + vduse_irq_wq = alloc_workqueue("vduse-irq", + WQ_HIGHPRI | WQ_SYSFS | WQ_UNBOUND, 0); + if (!vduse_irq_wq) + goto err_wq; + + ret = vduse_domain_init(); + if (ret) + goto err_domain; + + ret = vduse_mgmtdev_init(); + if (ret) + goto err_mgmtdev; + + return 0; +err_mgmtdev: + vduse_domain_exit(); +err_domain: + destroy_workqueue(vduse_irq_wq); +err_wq: + unregister_chrdev_region(vduse_major, VDUSE_DEV_MAX); +err_chardev: + class_destroy(vduse_class); +err_class: + misc_deregister(&vduse_misc); + return ret; +} +module_init(vduse_init); + +static void vduse_exit(void) +{ + misc_deregister(&vduse_misc); + class_destroy(vduse_class); + unregister_chrdev_region(vduse_major, VDUSE_DEV_MAX); + destroy_workqueue(vduse_irq_wq); + vduse_domain_exit(); + vduse_mgmtdev_exit(); +} +module_exit(vduse_exit); + +MODULE_VERSION(DRV_VERSION); +MODULE_LICENSE(DRV_LICENSE); +MODULE_AUTHOR(DRV_AUTHOR); +MODULE_DESCRIPTION(DRV_DESC); diff --git a/include/uapi/linux/vduse.h b/include/uapi/linux/vduse.h new file mode 100644 index 000000000000..2484b1f7d2ef --- /dev/null +++ b/include/uapi/linux/vduse.h @@ -0,0 +1,178 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI_VDUSE_H_ +#define _UAPI_VDUSE_H_ + +#include <linux/types.h> + +#define VDUSE_API_VERSION 0 + +#define VDUSE_MAX_TRANSFER_LEN 256 +#define VDUSE_NAME_MAX 256 + +/* the control messages definition for read/write */ + +enum vduse_req_type { + /* Set the vring address of virtqueue. */ + VDUSE_SET_VQ_NUM, + /* Set the vring address of virtqueue. */ + VDUSE_SET_VQ_ADDR, + /* Set ready status of virtqueue */ + VDUSE_SET_VQ_READY, + /* Get ready status of virtqueue */ + VDUSE_GET_VQ_READY, + /* Set the state for virtqueue */ + VDUSE_SET_VQ_STATE, + /* Get the state for virtqueue */ + VDUSE_GET_VQ_STATE, + /* Set virtio features supported by the driver */ + VDUSE_SET_FEATURES, + /* Get virtio features supported by the device */ + VDUSE_GET_FEATURES, + /* Set the device status */ + VDUSE_SET_STATUS, + /* Get the device status */ + VDUSE_GET_STATUS, + /* Write to device specific configuration space */ + VDUSE_SET_CONFIG, + /* Read from device specific configuration space */ + VDUSE_GET_CONFIG, + /* Notify userspace to update the memory mapping in device IOTLB */ + VDUSE_UPDATE_IOTLB, +}; + +struct vduse_vq_num { + __u32 index; /* virtqueue index */ + __u32 num; /* the size of virtqueue */ +}; + +struct vduse_vq_addr { + __u32 index; /* virtqueue index */ + __u32 padding; /* padding */ + __u64 desc_addr; /* address of desc area */ + __u64 driver_addr; /* address of driver area */ + __u64 device_addr; /* address of device area */ +}; + +struct vduse_vq_ready { + __u32 index; /* virtqueue index */ + __u8 ready; /* ready status of virtqueue */ +}; + +struct vduse_vq_state { + __u32 index; /* virtqueue index */ + __u32 avail_idx; /* virtqueue state (last_avail_idx) */ +}; + +struct vduse_dev_config_data { + __u32 offset; /* offset from the beginning of config space */ + __u32 len; /* the length to read/write */ + __u8 data[VDUSE_MAX_TRANSFER_LEN]; /* data buffer used to read/write */ +}; + +struct vduse_iova_range { + __u64 start; /* start of the IOVA range */ + __u64 last; /* end of the IOVA range */ +}; + +struct vduse_features { + __u64 features; /* virtio features */ +}; + +struct vduse_status { + __u8 status; /* device status */ +}; + +struct vduse_dev_request { + __u32 type; /* request type */ + __u32 request_id; /* request id */ + __u32 reserved[2]; /* for future use */ + union { + struct vduse_vq_num vq_num; /* virtqueue num */ + struct vduse_vq_addr vq_addr; /* virtqueue address */ + struct vduse_vq_ready vq_ready; /* virtqueue ready status */ + struct vduse_vq_state vq_state; /* virtqueue state */ + struct vduse_dev_config_data config; /* virtio device config space */ + struct vduse_iova_range iova; /* iova range for updating */ + struct vduse_features f; /* virtio features */ + struct vduse_status s; /* device status */ + __u32 padding[128]; /* padding */ + }; +}; + +struct vduse_dev_response { + __u32 request_id; /* corresponding request id */ +#define VDUSE_REQUEST_OK 0x00 +#define VDUSE_REQUEST_FAILED 0x01 + __u32 result; /* the result of request */ + __u32 reserved[2]; /* for future use */ + union { + struct vduse_vq_ready vq_ready; /* virtqueue ready status */ + struct vduse_vq_state vq_state; /* virtqueue state */ + struct vduse_dev_config_data config; /* virtio device config space */ + struct vduse_features f; /* virtio features */ + struct vduse_status s; /* device status */ + __u32 padding[128]; /* padding */ + }; +}; + +/* ioctls */ + +struct vduse_dev_config { + char name[VDUSE_NAME_MAX]; /* vduse device name */ + __u32 vendor_id; /* virtio vendor id */ + __u32 device_id; /* virtio device id */ + __u64 bounce_size; /* bounce buffer size for iommu */ + __u16 vq_size_max; /* the max size of virtqueue */ + __u16 padding; /* padding */ + __u32 vq_num; /* the number of virtqueues */ + __u32 vq_align; /* the allocation alignment of virtqueue's metadata */ + __u32 config_size; /* the size of the configuration space */ + __u32 reserved[15]; /* for future use */ +}; + +struct vduse_iotlb_entry { + __u64 offset; /* the mmap offset on fd */ + __u64 start; /* start of the IOVA range */ + __u64 last; /* last of the IOVA range */ +#define VDUSE_ACCESS_RO 0x1 +#define VDUSE_ACCESS_WO 0x2 +#define VDUSE_ACCESS_RW 0x3 + __u8 perm; /* access permission of this range */ +}; + +struct vduse_vq_eventfd { + __u32 index; /* virtqueue index */ +#define VDUSE_EVENTFD_DEASSIGN -1 + int fd; /* eventfd, -1 means de-assigning the eventfd */ +}; + +#define VDUSE_BASE 0x81 + +/* Get the version of VDUSE API. This is used for future extension */ +#define VDUSE_GET_API_VERSION _IO(VDUSE_BASE, 0x00) + +/* Set the version of VDUSE API. */ +#define VDUSE_SET_API_VERSION _IO(VDUSE_BASE, 0x01) + +/* Create a vduse device which is represented by a char device (/dev/vduse/<name>) */ +#define VDUSE_CREATE_DEV _IOW(VDUSE_BASE, 0x02, struct vduse_dev_config) + +/* Destroy a vduse device. Make sure there are no references to the char device */ +#define VDUSE_DESTROY_DEV _IOW(VDUSE_BASE, 0x03, char[VDUSE_NAME_MAX]) + +/* + * Get a file descriptor for the first overlapped iova region, + * -EINVAL means the iova region doesn't exist. + */ +#define VDUSE_IOTLB_GET_FD _IOWR(VDUSE_BASE, 0x04, struct vduse_iotlb_entry) + +/* Setup an eventfd to receive kick for virtqueue */ +#define VDUSE_VQ_SETUP_KICKFD _IOW(VDUSE_BASE, 0x05, struct vduse_vq_eventfd) + +/* Inject an interrupt for specific virtqueue */ +#define VDUSE_INJECT_VQ_IRQ _IOW(VDUSE_BASE, 0x06, __u32) + +/* Inject a config interrupt */ +#define VDUSE_INJECT_CONFIG_IRQ _IO(VDUSE_BASE, 0x07) + +#endif /* _UAPI_VDUSE_H_ */
This VDUSE driver enables implementing vDPA devices in userspace. Both control path and data path of vDPA devices will be able to be handled in userspace. In the control path, the VDUSE driver will make use of message mechnism to forward the config operation from vdpa bus driver to userspace. Userspace can use read()/write() to receive/reply those control messages. In the data path, VDUSE_IOTLB_GET_FD ioctl will be used to get the file descriptors referring to vDPA device's iova regions. Then userspace can use mmap() to access those iova regions. Besides, userspace can use ioctl() to inject interrupt and use the eventfd mechanism to receive virtqueue kicks. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> --- Documentation/userspace-api/ioctl/ioctl-number.rst | 1 + drivers/vdpa/Kconfig | 10 + drivers/vdpa/Makefile | 1 + drivers/vdpa/vdpa_user/Makefile | 5 + drivers/vdpa/vdpa_user/vduse_dev.c | 1453 ++++++++++++++++++++ include/uapi/linux/vduse.h | 178 +++ 6 files changed, 1648 insertions(+) create mode 100644 drivers/vdpa/vdpa_user/Makefile create mode 100644 drivers/vdpa/vdpa_user/vduse_dev.c create mode 100644 include/uapi/linux/vduse.h