diff mbox series

[v2,1/3] dt-bindings: media: document the nxp, imx8mq-mipi-csi2 receiver phy and controller

Message ID 20210531112326.90094-2-martin.kepplinger@puri.sm (mailing list archive)
State New, archived
Headers show
Series media: imx: add support for imx8mq MIPI RX | expand

Commit Message

Martin Kepplinger May 31, 2021, 11:23 a.m. UTC 
The i.MX8MQ SoC integrates a different MIPI CSI receiver as the i.MX8MM so
describe the DT bindings for it.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 162 ++++++++++++++++++
 1 file changed, 162 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml

Comments

Laurent Pinchart June 1, 2021, 12:45 a.m. UTC | #1 
Hi Martin,

Thank you for the patch.

On Mon, May 31, 2021 at 01:23:24PM +0200, Martin Kepplinger wrote:
> The i.MX8MQ SoC integrates a different MIPI CSI receiver as the i.MX8MM so
> describe the DT bindings for it.
> 
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> ---
>  .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 162 ++++++++++++++++++
>  1 file changed, 162 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> new file mode 100644
> index 000000000000..4e3b17c220fc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> @@ -0,0 +1,162 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/nxp,imx8mq-mipi-csi2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP and i.MX8MQ MIPI CSI-2 receiver

s/and //

> +
> +maintainers:
> +  - Martin Kepplinger <martin.kepplinger@puri.sm>
> +
> +description: |-
> +  This binding covers the CSI-2 RX PHY and host controller included in the
> +  NXP i.MX8MQ SoC. It handles the sensor/image input and process for all the
> +  input imaging devices.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,imx8mq-mipi-csi2
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 4

A description of each clock would be nice.

> +
> +  clock-names:
> +    minItems: 4

You can drop this, it's the default with 4 items listed below.

> +    items:
> +      - const: core
> +      - const: esc
> +      - const: pxl
> +      - const: clko2
> +
> +  assigned-clocks:
> +    maxItems: 3
> +
> +  assigned-clock-rates:
> +    maxItems: 3
> +
> +  assigned-clock-parents:
> +    maxItems: 3

Those properties shouldn't be part of the bindings, it's a system
configuration policy.

> +
> +  power-domains:
> +    maxItems: 1
> +
> +  phy-reset:
> +    description:
> +      The phandle to the imx8mq reset-controller.
> +    maxItems: 1
> +
> +  phy-gpr:
> +    description:
> +      The phandle to the imx8mq syscon iomux-gpr.
> +    maxItems: 1
> +
> +  interconnects:
> +    maxItems: 1
> +
> +  interconnect-names:
> +    const: dram
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port node, single endpoint describing the CSI-2 transmitter.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                items:
> +                  minItems: 1
> +                  maxItems: 4
> +                  items:
> +                    - const: 1
> +                    - const: 2
> +                    - const: 3
> +                    - const: 4
> +
> +            required:
> +              - data-lanes
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output port node

    required:
      - port@0
      - port@1

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - assigned-clocks
> +  - assigned-clock-rates
> +  - assigned-clock-parents
> +  - power-domains
> +  - phy-reset
> +  - phy-gpr
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/imx8mq-clock.h>
> +    #include <dt-bindings/interconnect/imx8mq.h>
> +
> +    mipi_csi1@30a70000 {
> +        compatible = "fsl,imx8mq-mipi-csi2";
> +        reg = <0x30a70000 0x1000>; /* MIPI CSI1 Controller base addr */
> +        clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
> +                 <&clk IMX8MQ_CLK_CSI1_ESC>,
> +                 <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
> +                 <&clk IMX8MQ_CLK_CLKO2>;
> +        clock-names = "core", "esc", "pxl", "clko2";
> +        assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
> +                          <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
> +                          <&clk IMX8MQ_CLK_CSI1_ESC>;
> +        assigned-clock-rates = <266000000>, <200000000>, <66000000>;
> +        assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
> +                                 <&clk IMX8MQ_SYS2_PLL_1000M>,
> +                                 <&clk IMX8MQ_SYS1_PLL_800M>;
> +        power-domains = <&pgc_mipi_csi1>;
> +        phy-reset = <&src>;
> +        phy-gpr = <&iomuxc_gpr>;
> +        interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
> +        interconnect-names = "dram";
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port@0 {
> +                reg = <0>;
> +
> +                imx8mm_mipi_csi_in: endpoint {
> +                    remote-endpoint = <&imx477_out>;
> +                    data-lanes = <1 2 3 4>;
> +                };
> +            };
> +
> +            port@1 {
> +                reg = <1>;
> +
> +                imx8mm_mipi_csi_out: endpoint {
> +                    remote-endpoint = <&csi_in>;
> +                };
> +            };
> +        };
> +    };
> +
> +...
Rob Herring June 4, 2021, 9:37 p.m. UTC | #2 
On Mon, May 31, 2021 at 01:23:24PM +0200, Martin Kepplinger wrote:
> The i.MX8MQ SoC integrates a different MIPI CSI receiver as the i.MX8MM so
> describe the DT bindings for it.
> 
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> ---
>  .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 162 ++++++++++++++++++
>  1 file changed, 162 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> new file mode 100644
> index 000000000000..4e3b17c220fc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> @@ -0,0 +1,162 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/nxp,imx8mq-mipi-csi2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP and i.MX8MQ MIPI CSI-2 receiver
> +
> +maintainers:
> +  - Martin Kepplinger <martin.kepplinger@puri.sm>
> +
> +description: |-
> +  This binding covers the CSI-2 RX PHY and host controller included in the
> +  NXP i.MX8MQ SoC. It handles the sensor/image input and process for all the
> +  input imaging devices.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,imx8mq-mipi-csi2
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 4
> +
> +  clock-names:
> +    minItems: 4
> +    items:
> +      - const: core
> +      - const: esc
> +      - const: pxl
> +      - const: clko2
> +
> +  assigned-clocks:
> +    maxItems: 3
> +
> +  assigned-clock-rates:
> +    maxItems: 3
> +
> +  assigned-clock-parents:
> +    maxItems: 3
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  phy-reset:
> +    description:
> +      The phandle to the imx8mq reset-controller.
> +    maxItems: 1

Sounds like this should use the reset binding.

> +
> +  phy-gpr:
> +    description:
> +      The phandle to the imx8mq syscon iomux-gpr.
> +    maxItems: 1

Should be using the phy binding?

> +
> +  interconnects:
> +    maxItems: 1
> +
> +  interconnect-names:
> +    const: dram
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port node, single endpoint describing the CSI-2 transmitter.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                items:
> +                  minItems: 1
> +                  maxItems: 4
> +                  items:
> +                    - const: 1
> +                    - const: 2
> +                    - const: 3
> +                    - const: 4
> +
> +            required:
> +              - data-lanes
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output port node
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - assigned-clocks
> +  - assigned-clock-rates
> +  - assigned-clock-parents
> +  - power-domains
> +  - phy-reset
> +  - phy-gpr
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/imx8mq-clock.h>
> +    #include <dt-bindings/interconnect/imx8mq.h>
> +
> +    mipi_csi1@30a70000 {

csi@...

> +        compatible = "fsl,imx8mq-mipi-csi2";
> +        reg = <0x30a70000 0x1000>; /* MIPI CSI1 Controller base addr */
> +        clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
> +                 <&clk IMX8MQ_CLK_CSI1_ESC>,
> +                 <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
> +                 <&clk IMX8MQ_CLK_CLKO2>;
> +        clock-names = "core", "esc", "pxl", "clko2";
> +        assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
> +                          <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
> +                          <&clk IMX8MQ_CLK_CSI1_ESC>;
> +        assigned-clock-rates = <266000000>, <200000000>, <66000000>;
> +        assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
> +                                 <&clk IMX8MQ_SYS2_PLL_1000M>,
> +                                 <&clk IMX8MQ_SYS1_PLL_800M>;
> +        power-domains = <&pgc_mipi_csi1>;
> +        phy-reset = <&src>;
> +        phy-gpr = <&iomuxc_gpr>;
> +        interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
> +        interconnect-names = "dram";
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port@0 {
> +                reg = <0>;
> +
> +                imx8mm_mipi_csi_in: endpoint {
> +                    remote-endpoint = <&imx477_out>;
> +                    data-lanes = <1 2 3 4>;
> +                };
> +            };
> +
> +            port@1 {
> +                reg = <1>;
> +
> +                imx8mm_mipi_csi_out: endpoint {
> +                    remote-endpoint = <&csi_in>;
> +                };
> +            };
> +        };
> +    };
> +
> +...
> -- 
> 2.30.2
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
new file mode 100644
index 000000000000..4e3b17c220fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
@@ -0,0 +1,162 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx8mq-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP and i.MX8MQ MIPI CSI-2 receiver
+
+maintainers:
+  - Martin Kepplinger <martin.kepplinger@puri.sm>
+
+description: |-
+  This binding covers the CSI-2 RX PHY and host controller included in the
+  NXP i.MX8MQ SoC. It handles the sensor/image input and process for all the
+  input imaging devices.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mq-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 4
+
+  clock-names:
+    minItems: 4
+    items:
+      - const: core
+      - const: esc
+      - const: pxl
+      - const: clko2
+
+  assigned-clocks:
+    maxItems: 3
+
+  assigned-clock-rates:
+    maxItems: 3
+
+  assigned-clock-parents:
+    maxItems: 3
+
+  power-domains:
+    maxItems: 1
+
+  phy-reset:
+    description:
+      The phandle to the imx8mq reset-controller.
+    maxItems: 1
+
+  phy-gpr:
+    description:
+      The phandle to the imx8mq syscon iomux-gpr.
+    maxItems: 1
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    const: dram
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                items:
+                  minItems: 1
+                  maxItems: 4
+                  items:
+                    - const: 1
+                    - const: 2
+                    - const: 3
+                    - const: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port node
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - assigned-clocks
+  - assigned-clock-rates
+  - assigned-clock-parents
+  - power-domains
+  - phy-reset
+  - phy-gpr
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/interconnect/imx8mq.h>
+
+    mipi_csi1@30a70000 {
+        compatible = "fsl,imx8mq-mipi-csi2";
+        reg = <0x30a70000 0x1000>; /* MIPI CSI1 Controller base addr */
+        clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+                 <&clk IMX8MQ_CLK_CSI1_ESC>,
+                 <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
+                 <&clk IMX8MQ_CLK_CLKO2>;
+        clock-names = "core", "esc", "pxl", "clko2";
+        assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+                          <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
+                          <&clk IMX8MQ_CLK_CSI1_ESC>;
+        assigned-clock-rates = <266000000>, <200000000>, <66000000>;
+        assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+                                 <&clk IMX8MQ_SYS2_PLL_1000M>,
+                                 <&clk IMX8MQ_SYS1_PLL_800M>;
+        power-domains = <&pgc_mipi_csi1>;
+        phy-reset = <&src>;
+        phy-gpr = <&iomuxc_gpr>;
+        interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
+        interconnect-names = "dram";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                imx8mm_mipi_csi_in: endpoint {
+                    remote-endpoint = <&imx477_out>;
+                    data-lanes = <1 2 3 4>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                imx8mm_mipi_csi_out: endpoint {
+                    remote-endpoint = <&csi_in>;
+                };
+            };
+        };
+    };
+
+...