| Message ID | 20210528152645.25577-2-joakim.tjernlund@infinera.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [1/2] Bluetooth: btrtl: rename USB fw for RTL8761 | expand |
On Fri, May 28, 2021 at 05:26:45PM +0200, Joakim Tjernlund wrote: > From: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> > > T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=04 Dev#= 18 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0b05 ProdID=190e Rev= 2.00 > S: Manufacturer=Realtek > S: Product=ASUS USB-BT500 > S: SerialNumber=xxxxxxxx > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> > --- > drivers/bluetooth/btusb.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c > index 5d603ef39bad..628f4b22cf69 100644 > --- a/drivers/bluetooth/btusb.c > +++ b/drivers/bluetooth/btusb.c > @@ -425,6 +425,10 @@ static const struct usb_device_id blacklist_table[] = { > { USB_DEVICE(0x0bda, 0xb009), .driver_info = BTUSB_REALTEK }, > { USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK }, > > + /* Additional Realtek 8761BU Bluetooth devices */ > + { USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK | > + BTUSB_WIDEBAND_SPEECH }, > + > /* Additional Realtek 8821AE Bluetooth devices */ > { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK }, > { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK }, > -- > 2.31.1 > <formletter> This is not the correct way to submit patches for inclusion in the stable kernel tree. Please read: https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html for how to do this properly. </formletter>
Hi Joakim, > T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=04 Dev#= 18 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0b05 ProdID=190e Rev= 2.00 > S: Manufacturer=Realtek > S: Product=ASUS USB-BT500 > S: SerialNumber=xxxxxxxx > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> > --- > drivers/bluetooth/btusb.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c > index 5d603ef39bad..628f4b22cf69 100644 > --- a/drivers/bluetooth/btusb.c > +++ b/drivers/bluetooth/btusb.c > @@ -425,6 +425,10 @@ static const struct usb_device_id blacklist_table[] = { > { USB_DEVICE(0x0bda, 0xb009), .driver_info = BTUSB_REALTEK }, > { USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK }, > > + /* Additional Realtek 8761BU Bluetooth devices */ > + { USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK | > + BTUSB_WIDEBAND_SPEECH }, > + Applying: Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device. .git/rebase-apply/patch:15: space before tab in indent. BTUSB_WIDEBAND_SPEECH }, warning: 1 line adds whitespace errors. Regards Marcel
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 5d603ef39bad..628f4b22cf69 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -425,6 +425,10 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0bda, 0xb009), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK }, + /* Additional Realtek 8761BU Bluetooth devices */ + { USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + /* Additional Realtek 8821AE Bluetooth devices */ { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },