mbox series

[0/7] fpga: reorganize to subdirs

Message ID 20210608162340.3010204-1-trix@redhat.com (mailing list archive)
Headers show
Series fpga: reorganize to subdirs | expand

Message

Tom Rix June 8, 2021, 4:23 p.m. UTC
From: Tom Rix <trix@redhat.com>

The incoming xrt patchset has a toplevel subdir xrt/
The current fpga/ uses a single dir with filename prefixes to subdivide owners
For consistency, there should be only one way to organize the fpga/ dir.
Because the subdir model scales better, refactor to use it.
The discussion wrt xrt is here:
https://lore.kernel.org/linux-fpga/68e85a4f-4a10-1ff9-0443-aa565878c855@redhat.com/

Follow drivers/net/ethernet/ which has control configs
NET_VENDOR_BLA that map to drivers/net/ethernet/bla
Since fpgas do not have many vendors, drop the 'VENDOR' and use
FPGA_BLA.

There are several new subdirs
altera/
dfl/
lattice/
xilinx/

Each subdir has a Kconfig that has a new/reused

if FPGA_BLA
  ... existing configs ...
endif FPGA_BLA

Which is sourced into the main fpga/Kconfig

Each subdir has a Makefile whose transversal is controlled in the
fpga/Makefile by

obj-$(CONFIG_FPGA_BLA) += bla/

For many of the moved files, they had a prefix bla-* that matched their
new subdir dir name bla/.  Those filename are overspecified.  So they
were simplified by removing the 'bla-' prefix.  If they were *.h files
their guards were also changed.

Some cleanup to arrange thing alphabetically and make fpga/Makefile's
whitespace look more like net/'s

Tom Rix (7):
  fpga: dfl: reorganize to subdir layout
  fpga: xilinx: reorganize to subdir layout
  fpga: altera: reorganize to subdir layout
  fpga: lattice: reorganize to subdir layout
  fpga: dfl: remove dfl- prefix on files
  fpga: xilinx: remove xilinx- prefix on files
  fpga: altera: remove altera- prefix on files

 Documentation/fpga/dfl.rst                    |   4 +-
 MAINTAINERS                                   |   2 +-
 drivers/fpga/Kconfig                          | 204 +-----------------
 drivers/fpga/Makefile                         |  47 +---
 drivers/fpga/altera/Kconfig                   |  79 +++++++
 drivers/fpga/altera/Makefile                  |  12 ++
 drivers/fpga/{altera-cvp.c => altera/cvp.c}   |   0
 .../fpga2sdram.c}                             |   0
 .../freeze-bridge.c}                          |   0
 .../{altera-hps2fpga.c => altera/hps2fpga.c}  |   0
 .../pr-ip-core-plat.c}                        |   0
 .../pr-ip-core.c}                             |   0
 .../fpga/{altera-ps-spi.c => altera/ps-spi.c} |   0
 drivers/fpga/{ => altera}/socfpga-a10.c       |   0
 drivers/fpga/{ => altera}/socfpga.c           |   0
 drivers/fpga/{ => altera}/stratix10-soc.c     |   0
 drivers/fpga/{ => altera}/ts73xx-fpga.c       |   0
 drivers/fpga/dfl/Kconfig                      |  80 +++++++
 drivers/fpga/dfl/Makefile                     |  17 ++
 .../afu-dma-region.c}                         |   2 +-
 .../fpga/{dfl-afu-error.c => dfl/afu-error.c} |   2 +-
 .../fpga/{dfl-afu-main.c => dfl/afu-main.c}   |   2 +-
 .../{dfl-afu-region.c => dfl/afu-region.c}    |   2 +-
 drivers/fpga/{dfl-afu.h => dfl/afu.h}         |   6 +-
 drivers/fpga/{ => dfl}/dfl.c                  |   0
 drivers/fpga/{ => dfl}/dfl.h                  |   0
 drivers/fpga/{dfl-fme-br.c => dfl/fme-br.c}   |   2 +-
 .../fpga/{dfl-fme-error.c => dfl/fme-error.c} |   2 +-
 .../fpga/{dfl-fme-main.c => dfl/fme-main.c}   |   2 +-
 drivers/fpga/{dfl-fme-mgr.c => dfl/fme-mgr.c} |   2 +-
 .../fpga/{dfl-fme-perf.c => dfl/fme-perf.c}   |   2 +-
 drivers/fpga/{dfl-fme-pr.c => dfl/fme-pr.c}   |   4 +-
 drivers/fpga/{dfl-fme-pr.h => dfl/fme-pr.h}   |   6 +-
 .../{dfl-fme-region.c => dfl/fme-region.c}    |   2 +-
 drivers/fpga/{dfl-fme.h => dfl/fme.h}         |   6 +-
 .../{dfl-n3000-nios.c => dfl/n3000-nios.c}    |   0
 drivers/fpga/{dfl-pci.c => dfl/pci.c}         |   0
 drivers/fpga/lattice/Kconfig                  |  22 ++
 drivers/fpga/lattice/Makefile                 |   4 +
 drivers/fpga/{ => lattice}/ice40-spi.c        |   0
 drivers/fpga/{ => lattice}/machxo2-spi.c      |   0
 drivers/fpga/xilinx/Kconfig                   |  48 +++++
 drivers/fpga/xilinx/Makefile                  |   8 +
 .../pr-decoupler.c}                           |   0
 drivers/fpga/{xilinx-spi.c => xilinx/spi.c}   |   0
 drivers/fpga/{ => xilinx}/zynq-fpga.c         |   0
 drivers/fpga/{ => xilinx}/zynqmp-fpga.c       |   0
 47 files changed, 306 insertions(+), 263 deletions(-)
 create mode 100644 drivers/fpga/altera/Kconfig
 create mode 100644 drivers/fpga/altera/Makefile
 rename drivers/fpga/{altera-cvp.c => altera/cvp.c} (100%)
 rename drivers/fpga/{altera-fpga2sdram.c => altera/fpga2sdram.c} (100%)
 rename drivers/fpga/{altera-freeze-bridge.c => altera/freeze-bridge.c} (100%)
 rename drivers/fpga/{altera-hps2fpga.c => altera/hps2fpga.c} (100%)
 rename drivers/fpga/{altera-pr-ip-core-plat.c => altera/pr-ip-core-plat.c} (100%)
 rename drivers/fpga/{altera-pr-ip-core.c => altera/pr-ip-core.c} (100%)
 rename drivers/fpga/{altera-ps-spi.c => altera/ps-spi.c} (100%)
 rename drivers/fpga/{ => altera}/socfpga-a10.c (100%)
 rename drivers/fpga/{ => altera}/socfpga.c (100%)
 rename drivers/fpga/{ => altera}/stratix10-soc.c (100%)
 rename drivers/fpga/{ => altera}/ts73xx-fpga.c (100%)
 create mode 100644 drivers/fpga/dfl/Kconfig
 create mode 100644 drivers/fpga/dfl/Makefile
 rename drivers/fpga/{dfl-afu-dma-region.c => dfl/afu-dma-region.c} (99%)
 rename drivers/fpga/{dfl-afu-error.c => dfl/afu-error.c} (99%)
 rename drivers/fpga/{dfl-afu-main.c => dfl/afu-main.c} (99%)
 rename drivers/fpga/{dfl-afu-region.c => dfl/afu-region.c} (99%)
 rename drivers/fpga/{dfl-afu.h => dfl/afu.h} (98%)
 rename drivers/fpga/{ => dfl}/dfl.c (100%)
 rename drivers/fpga/{ => dfl}/dfl.h (100%)
 rename drivers/fpga/{dfl-fme-br.c => dfl/fme-br.c} (99%)
 rename drivers/fpga/{dfl-fme-error.c => dfl/fme-error.c} (99%)
 rename drivers/fpga/{dfl-fme-main.c => dfl/fme-main.c} (99%)
 rename drivers/fpga/{dfl-fme-mgr.c => dfl/fme-mgr.c} (99%)
 rename drivers/fpga/{dfl-fme-perf.c => dfl/fme-perf.c} (99%)
 rename drivers/fpga/{dfl-fme-pr.c => dfl/fme-pr.c} (99%)
 rename drivers/fpga/{dfl-fme-pr.h => dfl/fme-pr.h} (96%)
 rename drivers/fpga/{dfl-fme-region.c => dfl/fme-region.c} (98%)
 rename drivers/fpga/{dfl-fme.h => dfl/fme.h} (95%)
 rename drivers/fpga/{dfl-n3000-nios.c => dfl/n3000-nios.c} (100%)
 rename drivers/fpga/{dfl-pci.c => dfl/pci.c} (100%)
 create mode 100644 drivers/fpga/lattice/Kconfig
 create mode 100644 drivers/fpga/lattice/Makefile
 rename drivers/fpga/{ => lattice}/ice40-spi.c (100%)
 rename drivers/fpga/{ => lattice}/machxo2-spi.c (100%)
 create mode 100644 drivers/fpga/xilinx/Kconfig
 create mode 100644 drivers/fpga/xilinx/Makefile
 rename drivers/fpga/{xilinx-pr-decoupler.c => xilinx/pr-decoupler.c} (100%)
 rename drivers/fpga/{xilinx-spi.c => xilinx/spi.c} (100%)
 rename drivers/fpga/{ => xilinx}/zynq-fpga.c (100%)
 rename drivers/fpga/{ => xilinx}/zynqmp-fpga.c (100%)

Comments

Tom Rix June 8, 2021, 4:23 p.m. UTC | #1
From: Tom Rix <trix@redhat.com>

The incoming xrt patchset has a toplevel subdir xrt/
The current fpga/ uses a single dir with filename prefixes to subdivide owners
For consistency, there should be only one way to organize the fpga/ dir.
Because the subdir model scales better, refactor to use it.
The discussion wrt xrt is here:
https://lore.kernel.org/linux-fpga/68e85a4f-4a10-1ff9-0443-aa565878c855@redhat.com/

Follow drivers/net/ethernet/ which has control configs
NET_VENDOR_BLA that map to drivers/net/ethernet/bla
Since fpgas do not have many vendors, drop the 'VENDOR' and use
FPGA_BLA.

There are several new subdirs
altera/
dfl/
lattice/
xilinx/

Each subdir has a Kconfig that has a new/reused

if FPGA_BLA
  ... existing configs ...
endif FPGA_BLA

Which is sourced into the main fpga/Kconfig

Each subdir has a Makefile whose transversal is controlled in the
fpga/Makefile by

obj-$(CONFIG_FPGA_BLA) += bla/

For many of the moved files, they had a prefix bla-* that matched their
new subdir dir name bla/.  Those filename are overspecified.  So they
were simplified by removing the 'bla-' prefix.  If they were *.h files
their guards were also changed.

Some cleanup to arrange thing alphabetically and make fpga/Makefile's
whitespace look more like net/'s

Tom Rix (7):
  fpga: dfl: reorganize to subdir layout
  fpga: xilinx: reorganize to subdir layout
  fpga: altera: reorganize to subdir layout
  fpga: lattice: reorganize to subdir layout
  fpga: dfl: remove dfl- prefix on files
  fpga: xilinx: remove xilinx- prefix on files
  fpga: altera: remove altera- prefix on files

 Documentation/fpga/dfl.rst                    |   4 +-
 MAINTAINERS                                   |   2 +-
 drivers/fpga/Kconfig                          | 204 +-----------------
 drivers/fpga/Makefile                         |  47 +---
 drivers/fpga/altera/Kconfig                   |  79 +++++++
 drivers/fpga/altera/Makefile                  |  12 ++
 drivers/fpga/{altera-cvp.c => altera/cvp.c}   |   0
 .../fpga2sdram.c}                             |   0
 .../freeze-bridge.c}                          |   0
 .../{altera-hps2fpga.c => altera/hps2fpga.c}  |   0
 .../pr-ip-core-plat.c}                        |   0
 .../pr-ip-core.c}                             |   0
 .../fpga/{altera-ps-spi.c => altera/ps-spi.c} |   0
 drivers/fpga/{ => altera}/socfpga-a10.c       |   0
 drivers/fpga/{ => altera}/socfpga.c           |   0
 drivers/fpga/{ => altera}/stratix10-soc.c     |   0
 drivers/fpga/{ => altera}/ts73xx-fpga.c       |   0
 drivers/fpga/dfl/Kconfig                      |  80 +++++++
 drivers/fpga/dfl/Makefile                     |  17 ++
 .../afu-dma-region.c}                         |   2 +-
 .../fpga/{dfl-afu-error.c => dfl/afu-error.c} |   2 +-
 .../fpga/{dfl-afu-main.c => dfl/afu-main.c}   |   2 +-
 .../{dfl-afu-region.c => dfl/afu-region.c}    |   2 +-
 drivers/fpga/{dfl-afu.h => dfl/afu.h}         |   6 +-
 drivers/fpga/{ => dfl}/dfl.c                  |   0
 drivers/fpga/{ => dfl}/dfl.h                  |   0
 drivers/fpga/{dfl-fme-br.c => dfl/fme-br.c}   |   2 +-
 .../fpga/{dfl-fme-error.c => dfl/fme-error.c} |   2 +-
 .../fpga/{dfl-fme-main.c => dfl/fme-main.c}   |   2 +-
 drivers/fpga/{dfl-fme-mgr.c => dfl/fme-mgr.c} |   2 +-
 .../fpga/{dfl-fme-perf.c => dfl/fme-perf.c}   |   2 +-
 drivers/fpga/{dfl-fme-pr.c => dfl/fme-pr.c}   |   4 +-
 drivers/fpga/{dfl-fme-pr.h => dfl/fme-pr.h}   |   6 +-
 .../{dfl-fme-region.c => dfl/fme-region.c}    |   2 +-
 drivers/fpga/{dfl-fme.h => dfl/fme.h}         |   6 +-
 .../{dfl-n3000-nios.c => dfl/n3000-nios.c}    |   0
 drivers/fpga/{dfl-pci.c => dfl/pci.c}         |   0
 drivers/fpga/lattice/Kconfig                  |  22 ++
 drivers/fpga/lattice/Makefile                 |   4 +
 drivers/fpga/{ => lattice}/ice40-spi.c        |   0
 drivers/fpga/{ => lattice}/machxo2-spi.c      |   0
 drivers/fpga/xilinx/Kconfig                   |  48 +++++
 drivers/fpga/xilinx/Makefile                  |   8 +
 .../pr-decoupler.c}                           |   0
 drivers/fpga/{xilinx-spi.c => xilinx/spi.c}   |   0
 drivers/fpga/{ => xilinx}/zynq-fpga.c         |   0
 drivers/fpga/{ => xilinx}/zynqmp-fpga.c       |   0
 47 files changed, 306 insertions(+), 263 deletions(-)
 create mode 100644 drivers/fpga/altera/Kconfig
 create mode 100644 drivers/fpga/altera/Makefile
 rename drivers/fpga/{altera-cvp.c => altera/cvp.c} (100%)
 rename drivers/fpga/{altera-fpga2sdram.c => altera/fpga2sdram.c} (100%)
 rename drivers/fpga/{altera-freeze-bridge.c => altera/freeze-bridge.c} (100%)
 rename drivers/fpga/{altera-hps2fpga.c => altera/hps2fpga.c} (100%)
 rename drivers/fpga/{altera-pr-ip-core-plat.c => altera/pr-ip-core-plat.c} (100%)
 rename drivers/fpga/{altera-pr-ip-core.c => altera/pr-ip-core.c} (100%)
 rename drivers/fpga/{altera-ps-spi.c => altera/ps-spi.c} (100%)
 rename drivers/fpga/{ => altera}/socfpga-a10.c (100%)
 rename drivers/fpga/{ => altera}/socfpga.c (100%)
 rename drivers/fpga/{ => altera}/stratix10-soc.c (100%)
 rename drivers/fpga/{ => altera}/ts73xx-fpga.c (100%)
 create mode 100644 drivers/fpga/dfl/Kconfig
 create mode 100644 drivers/fpga/dfl/Makefile
 rename drivers/fpga/{dfl-afu-dma-region.c => dfl/afu-dma-region.c} (99%)
 rename drivers/fpga/{dfl-afu-error.c => dfl/afu-error.c} (99%)
 rename drivers/fpga/{dfl-afu-main.c => dfl/afu-main.c} (99%)
 rename drivers/fpga/{dfl-afu-region.c => dfl/afu-region.c} (99%)
 rename drivers/fpga/{dfl-afu.h => dfl/afu.h} (98%)
 rename drivers/fpga/{ => dfl}/dfl.c (100%)
 rename drivers/fpga/{ => dfl}/dfl.h (100%)
 rename drivers/fpga/{dfl-fme-br.c => dfl/fme-br.c} (99%)
 rename drivers/fpga/{dfl-fme-error.c => dfl/fme-error.c} (99%)
 rename drivers/fpga/{dfl-fme-main.c => dfl/fme-main.c} (99%)
 rename drivers/fpga/{dfl-fme-mgr.c => dfl/fme-mgr.c} (99%)
 rename drivers/fpga/{dfl-fme-perf.c => dfl/fme-perf.c} (99%)
 rename drivers/fpga/{dfl-fme-pr.c => dfl/fme-pr.c} (99%)
 rename drivers/fpga/{dfl-fme-pr.h => dfl/fme-pr.h} (96%)
 rename drivers/fpga/{dfl-fme-region.c => dfl/fme-region.c} (98%)
 rename drivers/fpga/{dfl-fme.h => dfl/fme.h} (95%)
 rename drivers/fpga/{dfl-n3000-nios.c => dfl/n3000-nios.c} (100%)
 rename drivers/fpga/{dfl-pci.c => dfl/pci.c} (100%)
 create mode 100644 drivers/fpga/lattice/Kconfig
 create mode 100644 drivers/fpga/lattice/Makefile
 rename drivers/fpga/{ => lattice}/ice40-spi.c (100%)
 rename drivers/fpga/{ => lattice}/machxo2-spi.c (100%)
 create mode 100644 drivers/fpga/xilinx/Kconfig
 create mode 100644 drivers/fpga/xilinx/Makefile
 rename drivers/fpga/{xilinx-pr-decoupler.c => xilinx/pr-decoupler.c} (100%)
 rename drivers/fpga/{xilinx-spi.c => xilinx/spi.c} (100%)
 rename drivers/fpga/{ => xilinx}/zynq-fpga.c (100%)
 rename drivers/fpga/{ => xilinx}/zynqmp-fpga.c (100%)
Greg KH June 9, 2021, 9:58 a.m. UTC | #2
On Tue, Jun 08, 2021 at 09:23:32AM -0700, trix@redhat.com wrote:
> From: Tom Rix <trix@redhat.com>
> 
> The incoming xrt patchset has a toplevel subdir xrt/
> The current fpga/ uses a single dir with filename prefixes to subdivide owners
> For consistency, there should be only one way to organize the fpga/ dir.
> Because the subdir model scales better, refactor to use it.
> The discussion wrt xrt is here:
> https://lore.kernel.org/linux-fpga/68e85a4f-4a10-1ff9-0443-aa565878c855@redhat.com/

Your series was odd, patches 6 and 7 were not threaded properly.

Please fix up your emailer and resend so that tools can correctly pick
them up automatically.

thanks,

greg k-h
Greg KH June 9, 2021, 10 a.m. UTC | #3
On Tue, Jun 08, 2021 at 09:23:33AM -0700, trix@redhat.com wrote:
> From: Tom Rix <trix@redhat.com>
> 
> The incoming xrt patchset has a toplevel subdir xrt/
> The current fpga/ uses a single dir with filename prefixes to subdivide owners
> For consistency, there should be only one way to organize the fpga/ dir.
> Because the subdir model scales better, refactor to use it.
> The discussion wrt xrt is here:
> https://lore.kernel.org/linux-fpga/68e85a4f-4a10-1ff9-0443-aa565878c855@redhat.com/
> 
> Follow drivers/net/ethernet/ which has control configs
> NET_VENDOR_BLA that map to drivers/net/ethernet/bla
> Since fpgas do not have many vendors, drop the 'VENDOR' and use
> FPGA_BLA.

Why did we get two 0/7 emails?

confused,

greg k-h
Tom Rix June 9, 2021, 1:11 p.m. UTC | #4
On 6/9/21 3:00 AM, Greg KH wrote:
> On Tue, Jun 08, 2021 at 09:23:33AM -0700, trix@redhat.com wrote:
>> From: Tom Rix <trix@redhat.com>
>>
>> The incoming xrt patchset has a toplevel subdir xrt/
>> The current fpga/ uses a single dir with filename prefixes to subdivide owners
>> For consistency, there should be only one way to organize the fpga/ dir.
>> Because the subdir model scales better, refactor to use it.
>> The discussion wrt xrt is here:
>> https://lore.kernel.org/linux-fpga/68e85a4f-4a10-1ff9-0443-aa565878c855@redhat.com/
>>
>> Follow drivers/net/ethernet/ which has control configs
>> NET_VENDOR_BLA that map to drivers/net/ethernet/bla
>> Since fpgas do not have many vendors, drop the 'VENDOR' and use
>> FPGA_BLA.
> Why did we get two 0/7 emails?

Errr.. no clue,

I'll resend the set.

Tom

> confused,
>
> greg k-h
>