| Message ID | 20210520002249.361821-1-kenalba@google.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | 64-bit Digitizer Serial Numbers | expand |
To follow up to myself, we've decided that general >32-bit HID field support isn't justified at this time (and not really supported by the spec), so this set of patches can be simplified. At this time, I'm going to switch to a plan of treating a 64-bit Usage(Digitizer.Transducer Serial Number) as a singular oddity that needs to be processed, instead of adding general processing for arbitrary length HID fields throughout the hid-input system. As to the code, I'm going to be following up with revised patches: Patch #1 (minor cleanup) remains unchanged. Patch #2 (large field support) goes away Patch #3 (power_supply S/N support) is kept, and adds some minor changes to hid-core.c, particularly in hid_add_field() that recognize the 64-bit Usage(Digitizer.Transducer Serial Number) and cuts it into two fields, a 32-bit Usage(Digitizer.Transducer Serial Number) and a new 32-bit usage for the upper half. Kind regards, - Kenneth Albanowski On Wed, May 19, 2021 at 5:23 PM Kenneth Albanowski <kenalba@google.com> wrote: > > Still as RFC, here's a patch set to implement support for 64-bit > Digitizer Serial Numbers, following on to the prior discussion of how > we can support Usage(Digitizers.Transducer Serial Number) larger > than 32 bits. > > My primary goal is making the serial number available via the > power_supply node interface, and the third patch implements that: if > CONFIG_HID_BATTERY_STRENGTH is enabled, and a hid report includes > both Usage(Digitizers.Battery Strength) and Usage(Digitizers. > Transducer Serial Number) then the generated power_supply node > includes a SERIAL_NUMBER of "DG-ABCDEF..." of the last seen digitizer. > > For this patch set, I have not implemented any changes to MSC_SERIAL*, > however everything should be available for a future implementation. This > patch set does not change any events emitted by evdev. > > After some conversation with Dmitry, I am leaning towards serial number > integration with the hid-multitouch protocol being the better long term > solution for evdev, as that fits better with combined touch and stylus > operation, as well as providing a clear means to providing multiple > serial numbers for simultaneous styluses. > > This set includes general modifications to hid-core to decode and > represent HID fields larger than 32-bits as multiple consecutive 32-bit > words, allowing arbitrarily long fields (or at least as many as can fit > into HID_MAX_BUFFER_SIZE) to be passed upstream and (potentially) > processed by hid-input and other subsystems. > > (After trying a 64-bit implementation, I decided staying with 32-bit > words kept the rest of the hid-core cleaner, and it was worth > supporting arbitrary length fields instead of only upgrading > from 32 -> 64.) > > Kenneth Albanowski (3): > [hid] Minor cleanup > [hid] Enable processing of fields larger than 32 bits. > [hid] Emit digitizer serial number through power_supply > > Documentation/hid/hiddev.rst | 6 +- > drivers/hid/hid-core.c | 99 +++++++++++++++++++++----------- > drivers/hid/hid-debug.c | 27 ++++++--- > drivers/hid/hid-input.c | 108 +++++++++++++++++++++++++++++++++-- > include/linux/hid-debug.h | 4 +- > include/linux/hid.h | 10 +++- > 6 files changed, 199 insertions(+), 55 deletions(-) > > -- > 2.31.0 >
On Wed, 19 May 2021, Kenneth Albanowski wrote: > Still as RFC, here's a patch set to implement support for 64-bit > Digitizer Serial Numbers, following on to the prior discussion of how > we can support Usage(Digitizers.Transducer Serial Number) larger > than 32 bits. > > My primary goal is making the serial number available via the > power_supply node interface, and the third patch implements that: if > CONFIG_HID_BATTERY_STRENGTH is enabled, and a hid report includes > both Usage(Digitizers.Battery Strength) and Usage(Digitizers. > Transducer Serial Number) then the generated power_supply node > includes a SERIAL_NUMBER of "DG-ABCDEF..." of the last seen digitizer. > > For this patch set, I have not implemented any changes to MSC_SERIAL*, > however everything should be available for a future implementation. This > patch set does not change any events emitted by evdev. > > After some conversation with Dmitry, I am leaning towards serial number > integration with the hid-multitouch protocol being the better long term > solution for evdev, as that fits better with combined touch and stylus > operation, as well as providing a clear means to providing multiple > serial numbers for simultaneous styluses. > > This set includes general modifications to hid-core to decode and > represent HID fields larger than 32-bits as multiple consecutive 32-bit > words, allowing arbitrarily long fields (or at least as many as can fit > into HID_MAX_BUFFER_SIZE) to be passed upstream and (potentially) > processed by hid-input and other subsystems. > > (After trying a 64-bit implementation, I decided staying with 32-bit > words kept the rest of the hid-core cleaner, and it was worth > supporting arbitrary length fields instead of only upgrading > from 32 -> 64.) Sorry for keeping this on hold for so long, it fell in between cracks. This would need quite an extensive testing by Benjamin's testing infrastructure ... Benjamin, could you please put that into your queue? Other than that, please rework the patchset so that it uses kernel comment styles, it can't be applied in this form. Thanks,