diff mbox series

[net-next,v8,11/15] net: mdio: Add ACPI support code for mdio

Message ID 20210610163917.4138412-12-ciorneiioana@gmail.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series ACPI support for dpaa2 driver | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers warning 3 maintainers not CCed: hkallweit1@gmail.com davem@davemloft.net kuba@kernel.org
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 109 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Ioana Ciornei June 10, 2021, 4:39 p.m. UTC 
From: Calvin Johnson <calvin.johnson@oss.nxp.com>

Define acpi_mdiobus_register() to Register mii_bus and create PHYs for
each ACPI child node.

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---

Changes in v8: None
Changes in v7:
- Include headers directly used in acpi_mdio.c

Changes in v6:
- use GENMASK() and ACPI_COMPANION_SET()
- some cleanup
- remove unwanted header inclusion

Changes in v5:
- add missing MODULE_LICENSE()
- replace fwnode_get_id() with OF and ACPI function calls

Changes in v4: None
Changes in v3: None
Changes in v2: None

 MAINTAINERS                  |  1 +
 drivers/net/mdio/Kconfig     |  7 +++++
 drivers/net/mdio/Makefile    |  1 +
 drivers/net/mdio/acpi_mdio.c | 56 ++++++++++++++++++++++++++++++++++++
 include/linux/acpi_mdio.h    | 26 +++++++++++++++++
 5 files changed, 91 insertions(+)
 create mode 100644 drivers/net/mdio/acpi_mdio.c
 create mode 100644 include/linux/acpi_mdio.h

Comments

Rafael J. Wysocki June 10, 2021, 6:19 p.m. UTC | #1 
On Thu, Jun 10, 2021 at 6:40 PM Ioana Ciornei <ciorneiioana@gmail.com> wrote:
>
> From: Calvin Johnson <calvin.johnson@oss.nxp.com>
>
> Define acpi_mdiobus_register() to Register mii_bus and create PHYs for
> each ACPI child node.
>
> Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
> ---
>
> Changes in v8: None
> Changes in v7:
> - Include headers directly used in acpi_mdio.c
>
> Changes in v6:
> - use GENMASK() and ACPI_COMPANION_SET()
> - some cleanup
> - remove unwanted header inclusion
>
> Changes in v5:
> - add missing MODULE_LICENSE()
> - replace fwnode_get_id() with OF and ACPI function calls
>
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
>  MAINTAINERS                  |  1 +
>  drivers/net/mdio/Kconfig     |  7 +++++
>  drivers/net/mdio/Makefile    |  1 +
>  drivers/net/mdio/acpi_mdio.c | 56 ++++++++++++++++++++++++++++++++++++
>  include/linux/acpi_mdio.h    | 26 +++++++++++++++++
>  5 files changed, 91 insertions(+)
>  create mode 100644 drivers/net/mdio/acpi_mdio.c
>  create mode 100644 include/linux/acpi_mdio.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index e8f8b6c33a51..2172f594be8f 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6811,6 +6811,7 @@ F:        Documentation/devicetree/bindings/net/mdio*
>  F:     Documentation/devicetree/bindings/net/qca,ar803x.yaml
>  F:     Documentation/networking/phy.rst
>  F:     drivers/net/mdio/
> +F:     drivers/net/mdio/acpi_mdio.c
>  F:     drivers/net/mdio/fwnode_mdio.c
>  F:     drivers/net/mdio/of_mdio.c
>  F:     drivers/net/pcs/
> diff --git a/drivers/net/mdio/Kconfig b/drivers/net/mdio/Kconfig
> index 422e9e042a3c..99a6c13a11af 100644
> --- a/drivers/net/mdio/Kconfig
> +++ b/drivers/net/mdio/Kconfig
> @@ -34,6 +34,13 @@ config OF_MDIO
>         help
>           OpenFirmware MDIO bus (Ethernet PHY) accessors
>
> +config ACPI_MDIO
> +       def_tristate PHYLIB
> +       depends on ACPI
> +       depends on PHYLIB
> +       help
> +         ACPI MDIO bus (Ethernet PHY) accessors
> +
>  if MDIO_BUS
>
>  config MDIO_DEVRES
> diff --git a/drivers/net/mdio/Makefile b/drivers/net/mdio/Makefile
> index 2e6813c709eb..15f8dc4042ce 100644
> --- a/drivers/net/mdio/Makefile
> +++ b/drivers/net/mdio/Makefile
> @@ -1,6 +1,7 @@
>  # SPDX-License-Identifier: GPL-2.0
>  # Makefile for Linux MDIO bus drivers
>
> +obj-$(CONFIG_ACPI_MDIO)                += acpi_mdio.o
>  obj-$(CONFIG_FWNODE_MDIO)      += fwnode_mdio.o
>  obj-$(CONFIG_OF_MDIO)          += of_mdio.o
>
> diff --git a/drivers/net/mdio/acpi_mdio.c b/drivers/net/mdio/acpi_mdio.c
> new file mode 100644
> index 000000000000..60a86e3fc246
> --- /dev/null
> +++ b/drivers/net/mdio/acpi_mdio.c
> @@ -0,0 +1,56 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * ACPI helpers for the MDIO (Ethernet PHY) API
> + *
> + * This file provides helper functions for extracting PHY device information
> + * out of the ACPI ASL and using it to populate an mii_bus.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/acpi_mdio.h>
> +#include <linux/bits.h>
> +#include <linux/dev_printk.h>
> +#include <linux/fwnode_mdio.h>
> +#include <linux/module.h>
> +#include <linux/types.h>
> +
> +MODULE_AUTHOR("Calvin Johnson <calvin.johnson@oss.nxp.com>");
> +MODULE_LICENSE("GPL");
> +
> +/**
> + * acpi_mdiobus_register - Register mii_bus and create PHYs from the ACPI ASL.
> + * @mdio: pointer to mii_bus structure
> + * @fwnode: pointer to fwnode of MDIO bus.
> + *
> + * This function registers the mii_bus structure and registers a phy_device
> + * for each child node of @fwnode.

It would be good to mention that @fwnode is expected to represent an
ACPI device object corresponding to mdiio and its children are
expected to correspond to the PHY devices on that bus (if my
understanding of this is correct, that is).

With that addressed, please feel free to add

Acked-by: Rafael J. Wysocki <rafael@kernel.org>

to this patch.

> + */
> +int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
> +{
> +       struct fwnode_handle *child;
> +       u32 addr;
> +       int ret;
> +
> +       /* Mask out all PHYs from auto probing. */
> +       mdio->phy_mask = GENMASK(31, 0);
> +       ret = mdiobus_register(mdio);
> +       if (ret)
> +               return ret;
> +
> +       ACPI_COMPANION_SET(&mdio->dev, to_acpi_device_node(fwnode));
> +
> +       /* Loop over the child nodes and register a phy_device for each PHY */
> +       fwnode_for_each_child_node(fwnode, child) {
> +               ret = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), &addr);
> +               if (ret || addr >= PHY_MAX_ADDR)
> +                       continue;
> +
> +               ret = fwnode_mdiobus_register_phy(mdio, child, addr);
> +               if (ret == -ENODEV)
> +                       dev_err(&mdio->dev,
> +                               "MDIO device at address %d is missing.\n",
> +                               addr);
> +       }
> +       return 0;
> +}
> +EXPORT_SYMBOL(acpi_mdiobus_register);
> diff --git a/include/linux/acpi_mdio.h b/include/linux/acpi_mdio.h
> new file mode 100644
> index 000000000000..0a24ab7cb66f
> --- /dev/null
> +++ b/include/linux/acpi_mdio.h
> @@ -0,0 +1,26 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * ACPI helper for the MDIO (Ethernet PHY) API
> + */
> +
> +#ifndef __LINUX_ACPI_MDIO_H
> +#define __LINUX_ACPI_MDIO_H
> +
> +#include <linux/phy.h>
> +
> +#if IS_ENABLED(CONFIG_ACPI_MDIO)
> +int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode);
> +#else /* CONFIG_ACPI_MDIO */
> +static inline int
> +acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
> +{
> +       /*
> +        * Fall back to mdiobus_register() function to register a bus.
> +        * This way, we don't have to keep compat bits around in drivers.
> +        */
> +
> +       return mdiobus_register(mdio);
> +}
> +#endif
> +
> +#endif /* __LINUX_ACPI_MDIO_H */
> --
> 2.31.1
>
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index e8f8b6c33a51..2172f594be8f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6811,6 +6811,7 @@  F:	Documentation/devicetree/bindings/net/mdio*
 F:	Documentation/devicetree/bindings/net/qca,ar803x.yaml
 F:	Documentation/networking/phy.rst
 F:	drivers/net/mdio/
+F:	drivers/net/mdio/acpi_mdio.c
 F:	drivers/net/mdio/fwnode_mdio.c
 F:	drivers/net/mdio/of_mdio.c
 F:	drivers/net/pcs/
diff --git a/drivers/net/mdio/Kconfig b/drivers/net/mdio/Kconfig
index 422e9e042a3c..99a6c13a11af 100644
--- a/drivers/net/mdio/Kconfig
+++ b/drivers/net/mdio/Kconfig
@@ -34,6 +34,13 @@  config OF_MDIO
 	help
 	  OpenFirmware MDIO bus (Ethernet PHY) accessors
 
+config ACPI_MDIO
+	def_tristate PHYLIB
+	depends on ACPI
+	depends on PHYLIB
+	help
+	  ACPI MDIO bus (Ethernet PHY) accessors
+
 if MDIO_BUS
 
 config MDIO_DEVRES
diff --git a/drivers/net/mdio/Makefile b/drivers/net/mdio/Makefile
index 2e6813c709eb..15f8dc4042ce 100644
--- a/drivers/net/mdio/Makefile
+++ b/drivers/net/mdio/Makefile
@@ -1,6 +1,7 @@ 
 # SPDX-License-Identifier: GPL-2.0
 # Makefile for Linux MDIO bus drivers
 
+obj-$(CONFIG_ACPI_MDIO)		+= acpi_mdio.o
 obj-$(CONFIG_FWNODE_MDIO)	+= fwnode_mdio.o
 obj-$(CONFIG_OF_MDIO)		+= of_mdio.o
 
diff --git a/drivers/net/mdio/acpi_mdio.c b/drivers/net/mdio/acpi_mdio.c
new file mode 100644
index 000000000000..60a86e3fc246
--- /dev/null
+++ b/drivers/net/mdio/acpi_mdio.c
@@ -0,0 +1,56 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ACPI helpers for the MDIO (Ethernet PHY) API
+ *
+ * This file provides helper functions for extracting PHY device information
+ * out of the ACPI ASL and using it to populate an mii_bus.
+ */
+
+#include <linux/acpi.h>
+#include <linux/acpi_mdio.h>
+#include <linux/bits.h>
+#include <linux/dev_printk.h>
+#include <linux/fwnode_mdio.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+MODULE_AUTHOR("Calvin Johnson <calvin.johnson@oss.nxp.com>");
+MODULE_LICENSE("GPL");
+
+/**
+ * acpi_mdiobus_register - Register mii_bus and create PHYs from the ACPI ASL.
+ * @mdio: pointer to mii_bus structure
+ * @fwnode: pointer to fwnode of MDIO bus.
+ *
+ * This function registers the mii_bus structure and registers a phy_device
+ * for each child node of @fwnode.
+ */
+int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
+{
+	struct fwnode_handle *child;
+	u32 addr;
+	int ret;
+
+	/* Mask out all PHYs from auto probing. */
+	mdio->phy_mask = GENMASK(31, 0);
+	ret = mdiobus_register(mdio);
+	if (ret)
+		return ret;
+
+	ACPI_COMPANION_SET(&mdio->dev, to_acpi_device_node(fwnode));
+
+	/* Loop over the child nodes and register a phy_device for each PHY */
+	fwnode_for_each_child_node(fwnode, child) {
+		ret = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), &addr);
+		if (ret || addr >= PHY_MAX_ADDR)
+			continue;
+
+		ret = fwnode_mdiobus_register_phy(mdio, child, addr);
+		if (ret == -ENODEV)
+			dev_err(&mdio->dev,
+				"MDIO device at address %d is missing.\n",
+				addr);
+	}
+	return 0;
+}
+EXPORT_SYMBOL(acpi_mdiobus_register);
diff --git a/include/linux/acpi_mdio.h b/include/linux/acpi_mdio.h
new file mode 100644
index 000000000000..0a24ab7cb66f
--- /dev/null
+++ b/include/linux/acpi_mdio.h
@@ -0,0 +1,26 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * ACPI helper for the MDIO (Ethernet PHY) API
+ */
+
+#ifndef __LINUX_ACPI_MDIO_H
+#define __LINUX_ACPI_MDIO_H
+
+#include <linux/phy.h>
+
+#if IS_ENABLED(CONFIG_ACPI_MDIO)
+int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode);
+#else /* CONFIG_ACPI_MDIO */
+static inline int
+acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
+{
+	/*
+	 * Fall back to mdiobus_register() function to register a bus.
+	 * This way, we don't have to keep compat bits around in drivers.
+	 */
+
+	return mdiobus_register(mdio);
+}
+#endif
+
+#endif /* __LINUX_ACPI_MDIO_H */