| Message ID | 20210610182227.2480-1-vigneshr@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] dt-bindings: serial: Move omap-serial.txt to YAML schema | expand |
* Vignesh Raghavendra <vigneshr@ti.com> [210610 18:22]: > Convert serial-omap.txt to YAML schema for better checks and documentation. Looks good to me thanks: Acked-by: Tony Lindgren <tony@atomide.com>
On Thu, Jun 10, 2021 at 12:22 PM Vignesh Raghavendra <vigneshr@ti.com> wrote: > > Convert serial-omap.txt to YAML schema for better checks and documentation. > > Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> > --- > > v2: > *Drop reg-io-width and reg-shift as they are constant and documented in > txt bindings (also not used by driver). > *Drop unused label in example. > *Rename file to 8250_omap.yaml to be more generic as IP is present in > varies families of TI SoCs. > *Add description for interrupt entries > > .../devicetree/bindings/serial/8250_omap.yaml | 118 ++++++++++++++++++ > .../bindings/serial/omap_serial.txt | 40 ------ > 2 files changed, 118 insertions(+), 40 deletions(-) > create mode 100644 Documentation/devicetree/bindings/serial/8250_omap.yaml > delete mode 100644 Documentation/devicetree/bindings/serial/omap_serial.txt > > diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml > new file mode 100644 > index 000000000000..1c826fcf5828 > --- /dev/null > +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml > @@ -0,0 +1,118 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/serial/8250_omap.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Bindings for 8250 compliant UARTs on TI's OMAP2+ and K3 SoCs > + > +maintainers: > + - Vignesh Raghavendra <vigneshr@ti.com> > + > +allOf: > + - $ref: /schemas/serial/serial.yaml# > + - $ref: /schemas/serial/rs485.yaml# > + > +properties: > + compatible: > + oneOf: > + - enum: > + - ti,am3352-uart > + - ti,am4372-uart > + - ti,am654-uart > + - ti,dra742-uart > + - ti,omap2-uart > + - ti,omap3-uart > + - ti,omap4-uart > + - items: > + - enum: > + - ti,am64-uart > + - ti,j721e-uart > + - const: ti,am654-uart > + > + ti,hwmods: > + description: > + Must be "uart<n>", n being the instance number (1-based) > + This property is applicable only on legacy platforms mainly omap2/3 > + and ti81xx and should not be used on other platforms. > + $ref: /schemas/types.yaml#/definitions/string > + deprecated: true > + > + dmas: > + minItems: 1 > + maxItems: 2 > + > + dma-names: > + items: > + - const: tx > + - const: rx > + > + reg: > + maxItems: 1 > + > + interrupts: > + minItems: 1 > + maxItems: 2 > + description: > + First entry is module IRQ required for normal IO operation. > + Second entry is optional and corresponds to system wakeup IRQ > + where supported. interrupts: minItems: 1 items: - description: module IRQ required for normal IO operation - description: system wakeup IRQ > + > + clocks: > + maxItems: 1 > + > + clock-names: > + const: fclk > + > + rts-gpios: true > + cts-gpios: true > + dtr-gpios: true > + dsr-gpios: true > + rng-gpios: true > + dcd-gpios: true > + rs485-rts-delay: true > + rs485-rts-active-low: true > + rs485-rx-during-tx: true > + rs485-rts-active-high: true > + linux,rs485-enabled-at-boot-time: true > + rts-gpio: true > + power-domains: true > + clock-frequency: true > + current-speed: true > + > +required: > + - compatible > + - reg > + - interrupts > + > +additionalProperties: false Do you want to support serial attached devices? If so, you need: unevaluatedProperties: false You can also drop listing all the inherited properties from the included schemas. > + > +if: > + properties: > + compatible: > + oneOf: > + - const: ti,omap2-uart > + - const: ti,omap3-uart > + - const: ti,omap4-uart > + > +then: > + properties: > + ti,hwmods: > + items: > + - pattern: "^uart([1-9])$" > + > +else: > + properties: > + ti,hwmods: false > + > +examples: > + - | > + serial@49042000 { > + compatible = "ti,omap3-uart"; > + reg = <0x49042000 0x400>; > + interrupts = <80>; > + dmas = <&sdma 81 &sdma 82>; > + dma-names = "tx", "rx"; > + ti,hwmods = "uart4"; > + clock-frequency = <48000000>; > + }; > diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt > deleted file mode 100644 > index c2db8cabf2ab..000000000000 > --- a/Documentation/devicetree/bindings/serial/omap_serial.txt > +++ /dev/null > @@ -1,40 +0,0 @@ > -OMAP UART controller > - > -Required properties: > -- compatible : should be "ti,am64-uart", "ti,am654-uart" for AM64 controllers > -- compatible : should be "ti,j721e-uart", "ti,am654-uart" for J721E controllers > -- compatible : should be "ti,am654-uart" for AM654 controllers > -- compatible : should be "ti,omap2-uart" for OMAP2 controllers > -- compatible : should be "ti,omap3-uart" for OMAP3 controllers > -- compatible : should be "ti,omap4-uart" for OMAP4 controllers > -- compatible : should be "ti,am4372-uart" for AM437x controllers > -- compatible : should be "ti,am3352-uart" for AM335x controllers > -- compatible : should be "ti,dra742-uart" for DRA7x controllers > -- reg : address and length of the register space > -- interrupts or interrupts-extended : Should contain the uart interrupt > - specifier or both the interrupt > - controller phandle and interrupt > - specifier. > -- ti,hwmods : Must be "uart<n>", n being the instance number (1-based) > - > -Optional properties: > -- clock-frequency : frequency of the clock input to the UART > -- dmas : DMA specifier, consisting of a phandle to the DMA controller > - node and a DMA channel number. > -- dma-names : "rx" for receive channel, "tx" for transmit channel. > -- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt > -- rs485-rts-active-high: drive RTS high when sending (default is low). > -- clocks: phandle to the functional clock as per > - Documentation/devicetree/bindings/clock/clock-bindings.txt > - > -Example: > - > - uart4: serial@49042000 { > - compatible = "ti,omap3-uart"; > - reg = <0x49042000 0x400>; > - interrupts = <80>; > - dmas = <&sdma 81 &sdma 82>; > - dma-names = "tx", "rx"; > - ti,hwmods = "uart4"; > - clock-frequency = <48000000>; > - }; > -- > 2.32.0 >
On 6/18/21 8:28 PM, Rob Herring wrote: > On Thu, Jun 10, 2021 at 12:22 PM Vignesh Raghavendra <vigneshr@ti.com> wrote: >> >> Convert serial-omap.txt to YAML schema for better checks and documentation. >> >> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> >> --- >> >> v2: >> *Drop reg-io-width and reg-shift as they are constant and documented in >> txt bindings (also not used by driver). >> *Drop unused label in example. >> *Rename file to 8250_omap.yaml to be more generic as IP is present in >> varies families of TI SoCs. >> *Add description for interrupt entries >> >> .../devicetree/bindings/serial/8250_omap.yaml | 118 ++++++++++++++++++ >> .../bindings/serial/omap_serial.txt | 40 ------ >> 2 files changed, 118 insertions(+), 40 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/serial/8250_omap.yaml >> delete mode 100644 Documentation/devicetree/bindings/serial/omap_serial.txt >> >> diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml >> new file mode 100644 >> index 000000000000..1c826fcf5828 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml >> @@ -0,0 +1,118 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/serial/8250_omap.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Bindings for 8250 compliant UARTs on TI's OMAP2+ and K3 SoCs >> + >> +maintainers: >> + - Vignesh Raghavendra <vigneshr@ti.com> >> + >> +allOf: >> + - $ref: /schemas/serial/serial.yaml# >> + - $ref: /schemas/serial/rs485.yaml# >> + >> +properties: >> + compatible: >> + oneOf: >> + - enum: >> + - ti,am3352-uart >> + - ti,am4372-uart >> + - ti,am654-uart >> + - ti,dra742-uart >> + - ti,omap2-uart >> + - ti,omap3-uart >> + - ti,omap4-uart >> + - items: >> + - enum: >> + - ti,am64-uart >> + - ti,j721e-uart >> + - const: ti,am654-uart >> + >> + ti,hwmods: >> + description: >> + Must be "uart<n>", n being the instance number (1-based) >> + This property is applicable only on legacy platforms mainly omap2/3 >> + and ti81xx and should not be used on other platforms. >> + $ref: /schemas/types.yaml#/definitions/string >> + deprecated: true >> + >> + dmas: >> + minItems: 1 >> + maxItems: 2 >> + >> + dma-names: >> + items: >> + - const: tx >> + - const: rx >> + >> + reg: >> + maxItems: 1 >> + >> + interrupts: >> + minItems: 1 >> + maxItems: 2 >> + description: >> + First entry is module IRQ required for normal IO operation. >> + Second entry is optional and corresponds to system wakeup IRQ >> + where supported. > > interrupts: > minItems: 1 > items: > - description: module IRQ required for normal IO operation > - description: system wakeup IRQ > OK, will send a follow up fix as the patch is already queued. >> + >> + clocks: >> + maxItems: 1 >> + >> + clock-names: >> + const: fclk >> + >> + rts-gpios: true >> + cts-gpios: true >> + dtr-gpios: true >> + dsr-gpios: true >> + rng-gpios: true >> + dcd-gpios: true >> + rs485-rts-delay: true >> + rs485-rts-active-low: true >> + rs485-rx-during-tx: true >> + rs485-rts-active-high: true >> + linux,rs485-enabled-at-boot-time: true >> + rts-gpio: true >> + power-domains: true >> + clock-frequency: true >> + current-speed: true >> + >> +required: >> + - compatible >> + - reg >> + - interrupts >> + >> +additionalProperties: false > > Do you want to support serial attached devices? If so, you need: > > unevaluatedProperties: false > Yes, support for serial client devices is desired, but I see that with "unevaluatedProperties: false" there are no warnings if DT has a property not documented in the schema? Did I miss something? > You can also drop listing all the inherited properties from the > included schemas. Yes, this can be done with "unevaluatedProperties: false". Regards Vignesh
On Fri, Jun 18, 2021 at 9:22 AM Vignesh Raghavendra <vigneshr@ti.com> wrote: > > > > On 6/18/21 8:28 PM, Rob Herring wrote: > > On Thu, Jun 10, 2021 at 12:22 PM Vignesh Raghavendra <vigneshr@ti.com> wrote: > >> > >> Convert serial-omap.txt to YAML schema for better checks and documentation. > >> > >> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> > >> --- > >> > >> v2: > >> *Drop reg-io-width and reg-shift as they are constant and documented in > >> txt bindings (also not used by driver). > >> *Drop unused label in example. > >> *Rename file to 8250_omap.yaml to be more generic as IP is present in > >> varies families of TI SoCs. > >> *Add description for interrupt entries > >> > >> .../devicetree/bindings/serial/8250_omap.yaml | 118 ++++++++++++++++++ > >> .../bindings/serial/omap_serial.txt | 40 ------ > >> 2 files changed, 118 insertions(+), 40 deletions(-) > >> create mode 100644 Documentation/devicetree/bindings/serial/8250_omap.yaml > >> delete mode 100644 Documentation/devicetree/bindings/serial/omap_serial.txt > >> > >> diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml > >> new file mode 100644 > >> index 000000000000..1c826fcf5828 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml > >> @@ -0,0 +1,118 @@ > >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > >> +%YAML 1.2 > >> +--- > >> +$id: http://devicetree.org/schemas/serial/8250_omap.yaml# > >> +$schema: http://devicetree.org/meta-schemas/core.yaml# > >> + > >> +title: Bindings for 8250 compliant UARTs on TI's OMAP2+ and K3 SoCs > >> + > >> +maintainers: > >> + - Vignesh Raghavendra <vigneshr@ti.com> > >> + > >> +allOf: > >> + - $ref: /schemas/serial/serial.yaml# > >> + - $ref: /schemas/serial/rs485.yaml# > >> + > >> +properties: > >> + compatible: > >> + oneOf: > >> + - enum: > >> + - ti,am3352-uart > >> + - ti,am4372-uart > >> + - ti,am654-uart > >> + - ti,dra742-uart > >> + - ti,omap2-uart > >> + - ti,omap3-uart > >> + - ti,omap4-uart > >> + - items: > >> + - enum: > >> + - ti,am64-uart > >> + - ti,j721e-uart > >> + - const: ti,am654-uart > >> + > >> + ti,hwmods: > >> + description: > >> + Must be "uart<n>", n being the instance number (1-based) > >> + This property is applicable only on legacy platforms mainly omap2/3 > >> + and ti81xx and should not be used on other platforms. > >> + $ref: /schemas/types.yaml#/definitions/string > >> + deprecated: true > >> + > >> + dmas: > >> + minItems: 1 > >> + maxItems: 2 > >> + > >> + dma-names: > >> + items: > >> + - const: tx > >> + - const: rx > >> + > >> + reg: > >> + maxItems: 1 > >> + > >> + interrupts: > >> + minItems: 1 > >> + maxItems: 2 > >> + description: > >> + First entry is module IRQ required for normal IO operation. > >> + Second entry is optional and corresponds to system wakeup IRQ > >> + where supported. > > > > interrupts: > > minItems: 1 > > items: > > - description: module IRQ required for normal IO operation > > - description: system wakeup IRQ > > > > OK, will send a follow up fix as the patch is already queued. > > >> + > >> + clocks: > >> + maxItems: 1 > >> + > >> + clock-names: > >> + const: fclk > >> + > >> + rts-gpios: true > >> + cts-gpios: true > >> + dtr-gpios: true > >> + dsr-gpios: true > >> + rng-gpios: true > >> + dcd-gpios: true > >> + rs485-rts-delay: true > >> + rs485-rts-active-low: true > >> + rs485-rx-during-tx: true > >> + rs485-rts-active-high: true > >> + linux,rs485-enabled-at-boot-time: true > >> + rts-gpio: true > >> + power-domains: true > >> + clock-frequency: true > >> + current-speed: true > >> + > >> +required: > >> + - compatible > >> + - reg > >> + - interrupts > >> + > >> +additionalProperties: false > > > > Do you want to support serial attached devices? If so, you need: > > > > unevaluatedProperties: false > > > > Yes, support for serial client devices is desired, but I see that with > "unevaluatedProperties: false" there are no warnings if DT has a > property not documented in the schema? Did I miss something? Support for unevaluatedProperties is not yet implemented in the underlying jsonschema package. So we get the default behavior for unknown keywords which is a nop. Rob
diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml new file mode 100644 index 000000000000..1c826fcf5828 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/8250_omap.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for 8250 compliant UARTs on TI's OMAP2+ and K3 SoCs + +maintainers: + - Vignesh Raghavendra <vigneshr@ti.com> + +allOf: + - $ref: /schemas/serial/serial.yaml# + - $ref: /schemas/serial/rs485.yaml# + +properties: + compatible: + oneOf: + - enum: + - ti,am3352-uart + - ti,am4372-uart + - ti,am654-uart + - ti,dra742-uart + - ti,omap2-uart + - ti,omap3-uart + - ti,omap4-uart + - items: + - enum: + - ti,am64-uart + - ti,j721e-uart + - const: ti,am654-uart + + ti,hwmods: + description: + Must be "uart<n>", n being the instance number (1-based) + This property is applicable only on legacy platforms mainly omap2/3 + and ti81xx and should not be used on other platforms. + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + + dmas: + minItems: 1 + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + description: + First entry is module IRQ required for normal IO operation. + Second entry is optional and corresponds to system wakeup IRQ + where supported. + + clocks: + maxItems: 1 + + clock-names: + const: fclk + + rts-gpios: true + cts-gpios: true + dtr-gpios: true + dsr-gpios: true + rng-gpios: true + dcd-gpios: true + rs485-rts-delay: true + rs485-rts-active-low: true + rs485-rx-during-tx: true + rs485-rts-active-high: true + linux,rs485-enabled-at-boot-time: true + rts-gpio: true + power-domains: true + clock-frequency: true + current-speed: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +if: + properties: + compatible: + oneOf: + - const: ti,omap2-uart + - const: ti,omap3-uart + - const: ti,omap4-uart + +then: + properties: + ti,hwmods: + items: + - pattern: "^uart([1-9])$" + +else: + properties: + ti,hwmods: false + +examples: + - | + serial@49042000 { + compatible = "ti,omap3-uart"; + reg = <0x49042000 0x400>; + interrupts = <80>; + dmas = <&sdma 81 &sdma 82>; + dma-names = "tx", "rx"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + }; diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt deleted file mode 100644 index c2db8cabf2ab..000000000000 --- a/Documentation/devicetree/bindings/serial/omap_serial.txt +++ /dev/null @@ -1,40 +0,0 @@ -OMAP UART controller - -Required properties: -- compatible : should be "ti,am64-uart", "ti,am654-uart" for AM64 controllers -- compatible : should be "ti,j721e-uart", "ti,am654-uart" for J721E controllers -- compatible : should be "ti,am654-uart" for AM654 controllers -- compatible : should be "ti,omap2-uart" for OMAP2 controllers -- compatible : should be "ti,omap3-uart" for OMAP3 controllers -- compatible : should be "ti,omap4-uart" for OMAP4 controllers -- compatible : should be "ti,am4372-uart" for AM437x controllers -- compatible : should be "ti,am3352-uart" for AM335x controllers -- compatible : should be "ti,dra742-uart" for DRA7x controllers -- reg : address and length of the register space -- interrupts or interrupts-extended : Should contain the uart interrupt - specifier or both the interrupt - controller phandle and interrupt - specifier. -- ti,hwmods : Must be "uart<n>", n being the instance number (1-based) - -Optional properties: -- clock-frequency : frequency of the clock input to the UART -- dmas : DMA specifier, consisting of a phandle to the DMA controller - node and a DMA channel number. -- dma-names : "rx" for receive channel, "tx" for transmit channel. -- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt -- rs485-rts-active-high: drive RTS high when sending (default is low). -- clocks: phandle to the functional clock as per - Documentation/devicetree/bindings/clock/clock-bindings.txt - -Example: - - uart4: serial@49042000 { - compatible = "ti,omap3-uart"; - reg = <0x49042000 0x400>; - interrupts = <80>; - dmas = <&sdma 81 &sdma 82>; - dma-names = "tx", "rx"; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - };
Convert serial-omap.txt to YAML schema for better checks and documentation. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> --- v2: *Drop reg-io-width and reg-shift as they are constant and documented in txt bindings (also not used by driver). *Drop unused label in example. *Rename file to 8250_omap.yaml to be more generic as IP is present in varies families of TI SoCs. *Add description for interrupt entries .../devicetree/bindings/serial/8250_omap.yaml | 118 ++++++++++++++++++ .../bindings/serial/omap_serial.txt | 40 ------ 2 files changed, 118 insertions(+), 40 deletions(-) create mode 100644 Documentation/devicetree/bindings/serial/8250_omap.yaml delete mode 100644 Documentation/devicetree/bindings/serial/omap_serial.txt