| Message ID | 20210616124616.49249-13-jacopo+renesas@jmondi.org (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | 1524bb765d33a5b999b7af361e1e0fc9068b79d5 |
| Delegated to: | Kieran Bingham |
| Headers | show |
| Series | media: gmsl: Reliability improvements | expand |
Hi Jacopo, Thank you for the patch. This should be moved before 11/15 to avoid a bisection breakage (or 11/15 should be fixed, and this patch updated accordingly). On Wed, Jun 16, 2021 at 02:46:13PM +0200, Jacopo Mondi wrote: > There's no reason to allocate dynamically the 'serializer' field in > the driver structure. > > Embed the field and adjust all its users in the driver. > > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > drivers/media/i2c/rdacm20.c | 36 +++++++++++++++--------------------- > 1 file changed, 15 insertions(+), 21 deletions(-) > > diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c > index 5e0314a2b1ca..029af8fd7485 100644 > --- a/drivers/media/i2c/rdacm20.c > +++ b/drivers/media/i2c/rdacm20.c > @@ -312,7 +312,7 @@ static const struct ov10635_reg { > > struct rdacm20_device { > struct device *dev; > - struct max9271_device *serializer; > + struct max9271_device serializer; > struct i2c_client *sensor; > struct v4l2_subdev sd; > struct media_pad pad; > @@ -399,7 +399,7 @@ static int rdacm20_s_stream(struct v4l2_subdev *sd, int enable) > { > struct rdacm20_device *dev = sd_to_rdacm20(sd); > > - return max9271_set_serial_link(dev->serializer, enable); > + return max9271_set_serial_link(&dev->serializer, enable); > } > > static int rdacm20_enum_mbus_code(struct v4l2_subdev *sd, > @@ -455,10 +455,10 @@ static int rdacm20_initialize(struct rdacm20_device *dev) > unsigned int retry = 3; > int ret; > > - max9271_wake_up(dev->serializer); > + max9271_wake_up(&dev->serializer); > > /* Serial link disabled during config as it needs a valid pixel clock. */ > - ret = max9271_set_serial_link(dev->serializer, false); > + ret = max9271_set_serial_link(&dev->serializer, false); > if (ret) > return ret; > > @@ -466,35 +466,35 @@ static int rdacm20_initialize(struct rdacm20_device *dev) > * Ensure that we have a good link configuration before attempting to > * identify the device. > */ > - max9271_configure_i2c(dev->serializer, MAX9271_I2CSLVSH_469NS_234NS | > - MAX9271_I2CSLVTO_1024US | > - MAX9271_I2CMSTBT_105KBPS); > + max9271_configure_i2c(&dev->serializer, MAX9271_I2CSLVSH_469NS_234NS | > + MAX9271_I2CSLVTO_1024US | > + MAX9271_I2CMSTBT_105KBPS); > > - max9271_configure_gmsl_link(dev->serializer); > + max9271_configure_gmsl_link(&dev->serializer); > > - ret = max9271_verify_id(dev->serializer); > + ret = max9271_verify_id(&dev->serializer); > if (ret < 0) > return ret; > > - ret = max9271_set_address(dev->serializer, dev->addrs[0]); > + ret = max9271_set_address(&dev->serializer, dev->addrs[0]); > if (ret < 0) > return ret; > - dev->serializer->client->addr = dev->addrs[0]; > + dev->serializer.client->addr = dev->addrs[0]; > > /* > * Reset the sensor by cycling the OV10635 reset signal connected to the > * MAX9271 GPIO1 and verify communication with the OV10635. > */ > - ret = max9271_enable_gpios(dev->serializer, MAX9271_GPIO1OUT); > + ret = max9271_enable_gpios(&dev->serializer, MAX9271_GPIO1OUT); > if (ret) > return ret; > > - ret = max9271_clear_gpios(dev->serializer, MAX9271_GPIO1OUT); > + ret = max9271_clear_gpios(&dev->serializer, MAX9271_GPIO1OUT); > if (ret) > return ret; > usleep_range(10000, 15000); > > - ret = max9271_set_gpios(dev->serializer, MAX9271_GPIO1OUT); > + ret = max9271_set_gpios(&dev->serializer, MAX9271_GPIO1OUT); > if (ret) > return ret; > usleep_range(10000, 15000); > @@ -564,13 +564,7 @@ static int rdacm20_probe(struct i2c_client *client) > if (!dev) > return -ENOMEM; > dev->dev = &client->dev; > - > - dev->serializer = devm_kzalloc(&client->dev, sizeof(*dev->serializer), > - GFP_KERNEL); > - if (!dev->serializer) > - return -ENOMEM; > - > - dev->serializer->client = client; > + dev->serializer.client = client; > > ret = of_property_read_u32_array(client->dev.of_node, "reg", > dev->addrs, 2);
On 17/06/2021 02:14, Laurent Pinchart wrote: > Hi Jacopo, > > Thank you for the patch. > > This should be moved before 11/15 to avoid a bisection breakage (or > 11/15 should be fixed, and this patch updated accordingly). Good catch! Jacopo, I dropped the PR I made. It you just want to swap patch 11 and 12, then I can do that, if you want more extensive changes, then I need a v6. Let me know what you want. Hans > > On Wed, Jun 16, 2021 at 02:46:13PM +0200, Jacopo Mondi wrote: >> There's no reason to allocate dynamically the 'serializer' field in >> the driver structure. >> >> Embed the field and adjust all its users in the driver. >> >> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> >> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> >> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> >> --- >> drivers/media/i2c/rdacm20.c | 36 +++++++++++++++--------------------- >> 1 file changed, 15 insertions(+), 21 deletions(-) >> >> diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c >> index 5e0314a2b1ca..029af8fd7485 100644 >> --- a/drivers/media/i2c/rdacm20.c >> +++ b/drivers/media/i2c/rdacm20.c >> @@ -312,7 +312,7 @@ static const struct ov10635_reg { >> >> struct rdacm20_device { >> struct device *dev; >> - struct max9271_device *serializer; >> + struct max9271_device serializer; >> struct i2c_client *sensor; >> struct v4l2_subdev sd; >> struct media_pad pad; >> @@ -399,7 +399,7 @@ static int rdacm20_s_stream(struct v4l2_subdev *sd, int enable) >> { >> struct rdacm20_device *dev = sd_to_rdacm20(sd); >> >> - return max9271_set_serial_link(dev->serializer, enable); >> + return max9271_set_serial_link(&dev->serializer, enable); >> } >> >> static int rdacm20_enum_mbus_code(struct v4l2_subdev *sd, >> @@ -455,10 +455,10 @@ static int rdacm20_initialize(struct rdacm20_device *dev) >> unsigned int retry = 3; >> int ret; >> >> - max9271_wake_up(dev->serializer); >> + max9271_wake_up(&dev->serializer); >> >> /* Serial link disabled during config as it needs a valid pixel clock. */ >> - ret = max9271_set_serial_link(dev->serializer, false); >> + ret = max9271_set_serial_link(&dev->serializer, false); >> if (ret) >> return ret; >> >> @@ -466,35 +466,35 @@ static int rdacm20_initialize(struct rdacm20_device *dev) >> * Ensure that we have a good link configuration before attempting to >> * identify the device. >> */ >> - max9271_configure_i2c(dev->serializer, MAX9271_I2CSLVSH_469NS_234NS | >> - MAX9271_I2CSLVTO_1024US | >> - MAX9271_I2CMSTBT_105KBPS); >> + max9271_configure_i2c(&dev->serializer, MAX9271_I2CSLVSH_469NS_234NS | >> + MAX9271_I2CSLVTO_1024US | >> + MAX9271_I2CMSTBT_105KBPS); >> >> - max9271_configure_gmsl_link(dev->serializer); >> + max9271_configure_gmsl_link(&dev->serializer); >> >> - ret = max9271_verify_id(dev->serializer); >> + ret = max9271_verify_id(&dev->serializer); >> if (ret < 0) >> return ret; >> >> - ret = max9271_set_address(dev->serializer, dev->addrs[0]); >> + ret = max9271_set_address(&dev->serializer, dev->addrs[0]); >> if (ret < 0) >> return ret; >> - dev->serializer->client->addr = dev->addrs[0]; >> + dev->serializer.client->addr = dev->addrs[0]; >> >> /* >> * Reset the sensor by cycling the OV10635 reset signal connected to the >> * MAX9271 GPIO1 and verify communication with the OV10635. >> */ >> - ret = max9271_enable_gpios(dev->serializer, MAX9271_GPIO1OUT); >> + ret = max9271_enable_gpios(&dev->serializer, MAX9271_GPIO1OUT); >> if (ret) >> return ret; >> >> - ret = max9271_clear_gpios(dev->serializer, MAX9271_GPIO1OUT); >> + ret = max9271_clear_gpios(&dev->serializer, MAX9271_GPIO1OUT); >> if (ret) >> return ret; >> usleep_range(10000, 15000); >> >> - ret = max9271_set_gpios(dev->serializer, MAX9271_GPIO1OUT); >> + ret = max9271_set_gpios(&dev->serializer, MAX9271_GPIO1OUT); >> if (ret) >> return ret; >> usleep_range(10000, 15000); >> @@ -564,13 +564,7 @@ static int rdacm20_probe(struct i2c_client *client) >> if (!dev) >> return -ENOMEM; >> dev->dev = &client->dev; >> - >> - dev->serializer = devm_kzalloc(&client->dev, sizeof(*dev->serializer), >> - GFP_KERNEL); >> - if (!dev->serializer) >> - return -ENOMEM; >> - >> - dev->serializer->client = client; >> + dev->serializer.client = client; >> >> ret = of_property_read_u32_array(client->dev.of_node, "reg", >> dev->addrs, 2); >
Hello, On Thu, Jun 17, 2021 at 08:18:42AM +0200, Hans Verkuil wrote: > On 17/06/2021 02:14, Laurent Pinchart wrote: > > Hi Jacopo, > > > > Thank you for the patch. > > > > This should be moved before 11/15 to avoid a bisection breakage (or > > 11/15 should be fixed, and this patch updated accordingly). > > Good catch! Good catch indeed... Sorry about this I shuffled patches around multiple times and missed this one > > Jacopo, I dropped the PR I made. It you just want to swap patch 11 and 12, > then I can do that, if you want more extensive changes, then I need a v6. > > Let me know what you want. I think swapping 11 and 12 is enough, thanks for handling it. (BTW there's one additional tag from Kieran to collect which is not in v5. Would you like a v6 for that ?) Thanks j > > Hans > > > > > On Wed, Jun 16, 2021 at 02:46:13PM +0200, Jacopo Mondi wrote: > >> There's no reason to allocate dynamically the 'serializer' field in > >> the driver structure. > >> > >> Embed the field and adjust all its users in the driver. > >> > >> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > >> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> > >> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > >> --- > >> drivers/media/i2c/rdacm20.c | 36 +++++++++++++++--------------------- > >> 1 file changed, 15 insertions(+), 21 deletions(-) > >> > >> diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c > >> index 5e0314a2b1ca..029af8fd7485 100644 > >> --- a/drivers/media/i2c/rdacm20.c > >> +++ b/drivers/media/i2c/rdacm20.c > >> @@ -312,7 +312,7 @@ static const struct ov10635_reg { > >> > >> struct rdacm20_device { > >> struct device *dev; > >> - struct max9271_device *serializer; > >> + struct max9271_device serializer; > >> struct i2c_client *sensor; > >> struct v4l2_subdev sd; > >> struct media_pad pad; > >> @@ -399,7 +399,7 @@ static int rdacm20_s_stream(struct v4l2_subdev *sd, int enable) > >> { > >> struct rdacm20_device *dev = sd_to_rdacm20(sd); > >> > >> - return max9271_set_serial_link(dev->serializer, enable); > >> + return max9271_set_serial_link(&dev->serializer, enable); > >> } > >> > >> static int rdacm20_enum_mbus_code(struct v4l2_subdev *sd, > >> @@ -455,10 +455,10 @@ static int rdacm20_initialize(struct rdacm20_device *dev) > >> unsigned int retry = 3; > >> int ret; > >> > >> - max9271_wake_up(dev->serializer); > >> + max9271_wake_up(&dev->serializer); > >> > >> /* Serial link disabled during config as it needs a valid pixel clock. */ > >> - ret = max9271_set_serial_link(dev->serializer, false); > >> + ret = max9271_set_serial_link(&dev->serializer, false); > >> if (ret) > >> return ret; > >> > >> @@ -466,35 +466,35 @@ static int rdacm20_initialize(struct rdacm20_device *dev) > >> * Ensure that we have a good link configuration before attempting to > >> * identify the device. > >> */ > >> - max9271_configure_i2c(dev->serializer, MAX9271_I2CSLVSH_469NS_234NS | > >> - MAX9271_I2CSLVTO_1024US | > >> - MAX9271_I2CMSTBT_105KBPS); > >> + max9271_configure_i2c(&dev->serializer, MAX9271_I2CSLVSH_469NS_234NS | > >> + MAX9271_I2CSLVTO_1024US | > >> + MAX9271_I2CMSTBT_105KBPS); > >> > >> - max9271_configure_gmsl_link(dev->serializer); > >> + max9271_configure_gmsl_link(&dev->serializer); > >> > >> - ret = max9271_verify_id(dev->serializer); > >> + ret = max9271_verify_id(&dev->serializer); > >> if (ret < 0) > >> return ret; > >> > >> - ret = max9271_set_address(dev->serializer, dev->addrs[0]); > >> + ret = max9271_set_address(&dev->serializer, dev->addrs[0]); > >> if (ret < 0) > >> return ret; > >> - dev->serializer->client->addr = dev->addrs[0]; > >> + dev->serializer.client->addr = dev->addrs[0]; > >> > >> /* > >> * Reset the sensor by cycling the OV10635 reset signal connected to the > >> * MAX9271 GPIO1 and verify communication with the OV10635. > >> */ > >> - ret = max9271_enable_gpios(dev->serializer, MAX9271_GPIO1OUT); > >> + ret = max9271_enable_gpios(&dev->serializer, MAX9271_GPIO1OUT); > >> if (ret) > >> return ret; > >> > >> - ret = max9271_clear_gpios(dev->serializer, MAX9271_GPIO1OUT); > >> + ret = max9271_clear_gpios(&dev->serializer, MAX9271_GPIO1OUT); > >> if (ret) > >> return ret; > >> usleep_range(10000, 15000); > >> > >> - ret = max9271_set_gpios(dev->serializer, MAX9271_GPIO1OUT); > >> + ret = max9271_set_gpios(&dev->serializer, MAX9271_GPIO1OUT); > >> if (ret) > >> return ret; > >> usleep_range(10000, 15000); > >> @@ -564,13 +564,7 @@ static int rdacm20_probe(struct i2c_client *client) > >> if (!dev) > >> return -ENOMEM; > >> dev->dev = &client->dev; > >> - > >> - dev->serializer = devm_kzalloc(&client->dev, sizeof(*dev->serializer), > >> - GFP_KERNEL); > >> - if (!dev->serializer) > >> - return -ENOMEM; > >> - > >> - dev->serializer->client = client; > >> + dev->serializer.client = client; > >> > >> ret = of_property_read_u32_array(client->dev.of_node, "reg", > >> dev->addrs, 2); > > >
On 17/06/2021 09:42, Jacopo Mondi wrote: > Hello, > > On Thu, Jun 17, 2021 at 08:18:42AM +0200, Hans Verkuil wrote: >> On 17/06/2021 02:14, Laurent Pinchart wrote: >>> Hi Jacopo, >>> >>> Thank you for the patch. >>> >>> This should be moved before 11/15 to avoid a bisection breakage (or >>> 11/15 should be fixed, and this patch updated accordingly). >> >> Good catch! > > Good catch indeed... Sorry about this I shuffled patches around > multiple times and missed this one > >> >> Jacopo, I dropped the PR I made. It you just want to swap patch 11 and 12, >> then I can do that, if you want more extensive changes, then I need a v6. >> >> Let me know what you want. > > I think swapping 11 and 12 is enough, thanks for handling it. > (BTW there's one additional tag from Kieran to collect which is not in > v5. Would you like a v6 for that ?) Updated the PR and added Kieran's tag. So no need for you to do anything. Regards, Hans > > Thanks > j > >> >> Hans >> >>> >>> On Wed, Jun 16, 2021 at 02:46:13PM +0200, Jacopo Mondi wrote: >>>> There's no reason to allocate dynamically the 'serializer' field in >>>> the driver structure. >>>> >>>> Embed the field and adjust all its users in the driver. >>>> >>>> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> >>>> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> >>>> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> >>>> --- >>>> drivers/media/i2c/rdacm20.c | 36 +++++++++++++++--------------------- >>>> 1 file changed, 15 insertions(+), 21 deletions(-) >>>> >>>> diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c >>>> index 5e0314a2b1ca..029af8fd7485 100644 >>>> --- a/drivers/media/i2c/rdacm20.c >>>> +++ b/drivers/media/i2c/rdacm20.c >>>> @@ -312,7 +312,7 @@ static const struct ov10635_reg { >>>> >>>> struct rdacm20_device { >>>> struct device *dev; >>>> - struct max9271_device *serializer; >>>> + struct max9271_device serializer; >>>> struct i2c_client *sensor; >>>> struct v4l2_subdev sd; >>>> struct media_pad pad; >>>> @@ -399,7 +399,7 @@ static int rdacm20_s_stream(struct v4l2_subdev *sd, int enable) >>>> { >>>> struct rdacm20_device *dev = sd_to_rdacm20(sd); >>>> >>>> - return max9271_set_serial_link(dev->serializer, enable); >>>> + return max9271_set_serial_link(&dev->serializer, enable); >>>> } >>>> >>>> static int rdacm20_enum_mbus_code(struct v4l2_subdev *sd, >>>> @@ -455,10 +455,10 @@ static int rdacm20_initialize(struct rdacm20_device *dev) >>>> unsigned int retry = 3; >>>> int ret; >>>> >>>> - max9271_wake_up(dev->serializer); >>>> + max9271_wake_up(&dev->serializer); >>>> >>>> /* Serial link disabled during config as it needs a valid pixel clock. */ >>>> - ret = max9271_set_serial_link(dev->serializer, false); >>>> + ret = max9271_set_serial_link(&dev->serializer, false); >>>> if (ret) >>>> return ret; >>>> >>>> @@ -466,35 +466,35 @@ static int rdacm20_initialize(struct rdacm20_device *dev) >>>> * Ensure that we have a good link configuration before attempting to >>>> * identify the device. >>>> */ >>>> - max9271_configure_i2c(dev->serializer, MAX9271_I2CSLVSH_469NS_234NS | >>>> - MAX9271_I2CSLVTO_1024US | >>>> - MAX9271_I2CMSTBT_105KBPS); >>>> + max9271_configure_i2c(&dev->serializer, MAX9271_I2CSLVSH_469NS_234NS | >>>> + MAX9271_I2CSLVTO_1024US | >>>> + MAX9271_I2CMSTBT_105KBPS); >>>> >>>> - max9271_configure_gmsl_link(dev->serializer); >>>> + max9271_configure_gmsl_link(&dev->serializer); >>>> >>>> - ret = max9271_verify_id(dev->serializer); >>>> + ret = max9271_verify_id(&dev->serializer); >>>> if (ret < 0) >>>> return ret; >>>> >>>> - ret = max9271_set_address(dev->serializer, dev->addrs[0]); >>>> + ret = max9271_set_address(&dev->serializer, dev->addrs[0]); >>>> if (ret < 0) >>>> return ret; >>>> - dev->serializer->client->addr = dev->addrs[0]; >>>> + dev->serializer.client->addr = dev->addrs[0]; >>>> >>>> /* >>>> * Reset the sensor by cycling the OV10635 reset signal connected to the >>>> * MAX9271 GPIO1 and verify communication with the OV10635. >>>> */ >>>> - ret = max9271_enable_gpios(dev->serializer, MAX9271_GPIO1OUT); >>>> + ret = max9271_enable_gpios(&dev->serializer, MAX9271_GPIO1OUT); >>>> if (ret) >>>> return ret; >>>> >>>> - ret = max9271_clear_gpios(dev->serializer, MAX9271_GPIO1OUT); >>>> + ret = max9271_clear_gpios(&dev->serializer, MAX9271_GPIO1OUT); >>>> if (ret) >>>> return ret; >>>> usleep_range(10000, 15000); >>>> >>>> - ret = max9271_set_gpios(dev->serializer, MAX9271_GPIO1OUT); >>>> + ret = max9271_set_gpios(&dev->serializer, MAX9271_GPIO1OUT); >>>> if (ret) >>>> return ret; >>>> usleep_range(10000, 15000); >>>> @@ -564,13 +564,7 @@ static int rdacm20_probe(struct i2c_client *client) >>>> if (!dev) >>>> return -ENOMEM; >>>> dev->dev = &client->dev; >>>> - >>>> - dev->serializer = devm_kzalloc(&client->dev, sizeof(*dev->serializer), >>>> - GFP_KERNEL); >>>> - if (!dev->serializer) >>>> - return -ENOMEM; >>>> - >>>> - dev->serializer->client = client; >>>> + dev->serializer.client = client; >>>> >>>> ret = of_property_read_u32_array(client->dev.of_node, "reg", >>>> dev->addrs, 2); >>> >>
On Thu, Jun 17, 2021 at 10:12:26AM +0200, Hans Verkuil wrote: > On 17/06/2021 09:42, Jacopo Mondi wrote: > > Hello, > > > > On Thu, Jun 17, 2021 at 08:18:42AM +0200, Hans Verkuil wrote: > >> On 17/06/2021 02:14, Laurent Pinchart wrote: > >>> Hi Jacopo, > >>> > >>> Thank you for the patch. > >>> > >>> This should be moved before 11/15 to avoid a bisection breakage (or > >>> 11/15 should be fixed, and this patch updated accordingly). > >> > >> Good catch! > > > > Good catch indeed... Sorry about this I shuffled patches around > > multiple times and missed this one > > > >> > >> Jacopo, I dropped the PR I made. It you just want to swap patch 11 and 12, > >> then I can do that, if you want more extensive changes, then I need a v6. > >> > >> Let me know what you want. > > > > I think swapping 11 and 12 is enough, thanks for handling it. > > (BTW there's one additional tag from Kieran to collect which is not in > > v5. Would you like a v6 for that ?) > > Updated the PR and added Kieran's tag. So no need for you to do anything. Thanks a lot then and sorry for hiccup > > Regards, > > Hans > > > > > Thanks > > j > > > >> > >> Hans > >> > >>> > >>> On Wed, Jun 16, 2021 at 02:46:13PM +0200, Jacopo Mondi wrote: > >>>> There's no reason to allocate dynamically the 'serializer' field in > >>>> the driver structure. > >>>> > >>>> Embed the field and adjust all its users in the driver. > >>>> > >>>> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > >>>> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> > >>>> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > >>>> --- > >>>> drivers/media/i2c/rdacm20.c | 36 +++++++++++++++--------------------- > >>>> 1 file changed, 15 insertions(+), 21 deletions(-) > >>>> > >>>> diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c > >>>> index 5e0314a2b1ca..029af8fd7485 100644 > >>>> --- a/drivers/media/i2c/rdacm20.c > >>>> +++ b/drivers/media/i2c/rdacm20.c > >>>> @@ -312,7 +312,7 @@ static const struct ov10635_reg { > >>>> > >>>> struct rdacm20_device { > >>>> struct device *dev; > >>>> - struct max9271_device *serializer; > >>>> + struct max9271_device serializer; > >>>> struct i2c_client *sensor; > >>>> struct v4l2_subdev sd; > >>>> struct media_pad pad; > >>>> @@ -399,7 +399,7 @@ static int rdacm20_s_stream(struct v4l2_subdev *sd, int enable) > >>>> { > >>>> struct rdacm20_device *dev = sd_to_rdacm20(sd); > >>>> > >>>> - return max9271_set_serial_link(dev->serializer, enable); > >>>> + return max9271_set_serial_link(&dev->serializer, enable); > >>>> } > >>>> > >>>> static int rdacm20_enum_mbus_code(struct v4l2_subdev *sd, > >>>> @@ -455,10 +455,10 @@ static int rdacm20_initialize(struct rdacm20_device *dev) > >>>> unsigned int retry = 3; > >>>> int ret; > >>>> > >>>> - max9271_wake_up(dev->serializer); > >>>> + max9271_wake_up(&dev->serializer); > >>>> > >>>> /* Serial link disabled during config as it needs a valid pixel clock. */ > >>>> - ret = max9271_set_serial_link(dev->serializer, false); > >>>> + ret = max9271_set_serial_link(&dev->serializer, false); > >>>> if (ret) > >>>> return ret; > >>>> > >>>> @@ -466,35 +466,35 @@ static int rdacm20_initialize(struct rdacm20_device *dev) > >>>> * Ensure that we have a good link configuration before attempting to > >>>> * identify the device. > >>>> */ > >>>> - max9271_configure_i2c(dev->serializer, MAX9271_I2CSLVSH_469NS_234NS | > >>>> - MAX9271_I2CSLVTO_1024US | > >>>> - MAX9271_I2CMSTBT_105KBPS); > >>>> + max9271_configure_i2c(&dev->serializer, MAX9271_I2CSLVSH_469NS_234NS | > >>>> + MAX9271_I2CSLVTO_1024US | > >>>> + MAX9271_I2CMSTBT_105KBPS); > >>>> > >>>> - max9271_configure_gmsl_link(dev->serializer); > >>>> + max9271_configure_gmsl_link(&dev->serializer); > >>>> > >>>> - ret = max9271_verify_id(dev->serializer); > >>>> + ret = max9271_verify_id(&dev->serializer); > >>>> if (ret < 0) > >>>> return ret; > >>>> > >>>> - ret = max9271_set_address(dev->serializer, dev->addrs[0]); > >>>> + ret = max9271_set_address(&dev->serializer, dev->addrs[0]); > >>>> if (ret < 0) > >>>> return ret; > >>>> - dev->serializer->client->addr = dev->addrs[0]; > >>>> + dev->serializer.client->addr = dev->addrs[0]; > >>>> > >>>> /* > >>>> * Reset the sensor by cycling the OV10635 reset signal connected to the > >>>> * MAX9271 GPIO1 and verify communication with the OV10635. > >>>> */ > >>>> - ret = max9271_enable_gpios(dev->serializer, MAX9271_GPIO1OUT); > >>>> + ret = max9271_enable_gpios(&dev->serializer, MAX9271_GPIO1OUT); > >>>> if (ret) > >>>> return ret; > >>>> > >>>> - ret = max9271_clear_gpios(dev->serializer, MAX9271_GPIO1OUT); > >>>> + ret = max9271_clear_gpios(&dev->serializer, MAX9271_GPIO1OUT); > >>>> if (ret) > >>>> return ret; > >>>> usleep_range(10000, 15000); > >>>> > >>>> - ret = max9271_set_gpios(dev->serializer, MAX9271_GPIO1OUT); > >>>> + ret = max9271_set_gpios(&dev->serializer, MAX9271_GPIO1OUT); > >>>> if (ret) > >>>> return ret; > >>>> usleep_range(10000, 15000); > >>>> @@ -564,13 +564,7 @@ static int rdacm20_probe(struct i2c_client *client) > >>>> if (!dev) > >>>> return -ENOMEM; > >>>> dev->dev = &client->dev; > >>>> - > >>>> - dev->serializer = devm_kzalloc(&client->dev, sizeof(*dev->serializer), > >>>> - GFP_KERNEL); > >>>> - if (!dev->serializer) > >>>> - return -ENOMEM; > >>>> - > >>>> - dev->serializer->client = client; > >>>> + dev->serializer.client = client; > >>>> > >>>> ret = of_property_read_u32_array(client->dev.of_node, "reg", > >>>> dev->addrs, 2); > >>> > >> >
diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c index 5e0314a2b1ca..029af8fd7485 100644 --- a/drivers/media/i2c/rdacm20.c +++ b/drivers/media/i2c/rdacm20.c @@ -312,7 +312,7 @@ static const struct ov10635_reg { struct rdacm20_device { struct device *dev; - struct max9271_device *serializer; + struct max9271_device serializer; struct i2c_client *sensor; struct v4l2_subdev sd; struct media_pad pad; @@ -399,7 +399,7 @@ static int rdacm20_s_stream(struct v4l2_subdev *sd, int enable) { struct rdacm20_device *dev = sd_to_rdacm20(sd); - return max9271_set_serial_link(dev->serializer, enable); + return max9271_set_serial_link(&dev->serializer, enable); } static int rdacm20_enum_mbus_code(struct v4l2_subdev *sd, @@ -455,10 +455,10 @@ static int rdacm20_initialize(struct rdacm20_device *dev) unsigned int retry = 3; int ret; - max9271_wake_up(dev->serializer); + max9271_wake_up(&dev->serializer); /* Serial link disabled during config as it needs a valid pixel clock. */ - ret = max9271_set_serial_link(dev->serializer, false); + ret = max9271_set_serial_link(&dev->serializer, false); if (ret) return ret; @@ -466,35 +466,35 @@ static int rdacm20_initialize(struct rdacm20_device *dev) * Ensure that we have a good link configuration before attempting to * identify the device. */ - max9271_configure_i2c(dev->serializer, MAX9271_I2CSLVSH_469NS_234NS | - MAX9271_I2CSLVTO_1024US | - MAX9271_I2CMSTBT_105KBPS); + max9271_configure_i2c(&dev->serializer, MAX9271_I2CSLVSH_469NS_234NS | + MAX9271_I2CSLVTO_1024US | + MAX9271_I2CMSTBT_105KBPS); - max9271_configure_gmsl_link(dev->serializer); + max9271_configure_gmsl_link(&dev->serializer); - ret = max9271_verify_id(dev->serializer); + ret = max9271_verify_id(&dev->serializer); if (ret < 0) return ret; - ret = max9271_set_address(dev->serializer, dev->addrs[0]); + ret = max9271_set_address(&dev->serializer, dev->addrs[0]); if (ret < 0) return ret; - dev->serializer->client->addr = dev->addrs[0]; + dev->serializer.client->addr = dev->addrs[0]; /* * Reset the sensor by cycling the OV10635 reset signal connected to the * MAX9271 GPIO1 and verify communication with the OV10635. */ - ret = max9271_enable_gpios(dev->serializer, MAX9271_GPIO1OUT); + ret = max9271_enable_gpios(&dev->serializer, MAX9271_GPIO1OUT); if (ret) return ret; - ret = max9271_clear_gpios(dev->serializer, MAX9271_GPIO1OUT); + ret = max9271_clear_gpios(&dev->serializer, MAX9271_GPIO1OUT); if (ret) return ret; usleep_range(10000, 15000); - ret = max9271_set_gpios(dev->serializer, MAX9271_GPIO1OUT); + ret = max9271_set_gpios(&dev->serializer, MAX9271_GPIO1OUT); if (ret) return ret; usleep_range(10000, 15000); @@ -564,13 +564,7 @@ static int rdacm20_probe(struct i2c_client *client) if (!dev) return -ENOMEM; dev->dev = &client->dev; - - dev->serializer = devm_kzalloc(&client->dev, sizeof(*dev->serializer), - GFP_KERNEL); - if (!dev->serializer) - return -ENOMEM; - - dev->serializer->client = client; + dev->serializer.client = client; ret = of_property_read_u32_array(client->dev.of_node, "reg", dev->addrs, 2);