| Message ID | 20210527191532.376414-1-aconole@redhat.com (mailing list archive) |
|---|---|
| State | RFC |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [RFC,net-next] openvswitch: add trace points | expand |
Eelco Chaudron <echaudro@redhat.com> writes: > On 27 May 2021, at 21:15, Aaron Conole wrote: > > This makes openvswitch module use the event tracing framework > to log the upcall interface and action execution pipeline. When > using openvswitch as the packet forwarding engine, some types of > debugging are made possible simply by using the ovs-vswitchd's > ofproto/trace command. However, such a command has some > limitations: > > 1. When trying to trace packets that go through the CT action, > the state of the packet can't be determined, and probably > would be potentially wrong. > > 2. Deducing problem packets can sometimes be difficult as well > even if many of the flows are known > > 3. It's possible to use the openvswitch module even without > the ovs-vswitchd (although, not common use). > > Introduce the event tracing points here to make it possible for > working through these problems in kernel space. The style is > copied from the mac80211 driver-trace / trace code for > consistency. > > Thanks for doing this Aaron, it will definitely help when trying to debug some customer issues. Thanks for the review! > Just to be sure, I did some tests to make sure these changes do not impact performance, and it looks fine! See some > small nits/comments below, but other than that I would say please re-send as an official patch. > > Cheers, > > Eelco > > Signed-off-by: Aaron Conole <aconole@redhat.com> > --- > net/openvswitch/Makefile | 3 + > net/openvswitch/actions.c | 4 + > net/openvswitch/datapath.c | 7 ++ > net/openvswitch/openvswitch_trace.c | 10 ++ > net/openvswitch/openvswitch_trace.h | 152 ++++++++++++++++++++++++++++ > 5 files changed, 176 insertions(+) > create mode 100644 net/openvswitch/openvswitch_trace.c > create mode 100644 net/openvswitch/openvswitch_trace.h > > diff --git a/net/openvswitch/Makefile b/net/openvswitch/Makefile > index 41109c326f3a..28982630bef3 100644 > --- a/net/openvswitch/Makefile > +++ b/net/openvswitch/Makefile > @@ -13,6 +13,7 @@ openvswitch-y := \ > flow_netlink.o \ > flow_table.o \ > meter.o \ > + openvswitch_trace.o \ > vport.o \ > vport-internal_dev.o \ > vport-netdev.o > @@ -24,3 +25,5 @@ endif > obj-$(CONFIG_OPENVSWITCH_VXLAN)+= vport-vxlan.o > obj-$(CONFIG_OPENVSWITCH_GENEVE)+= vport-geneve.o > obj-$(CONFIG_OPENVSWITCH_GRE) += vport-gre.o > + > +CFLAGS_openvswitch_trace.o = -I$(src) > diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c > index d858ea580e43..62285453ca79 100644 > --- a/net/openvswitch/actions.c > +++ b/net/openvswitch/actions.c > @@ -30,6 +30,7 @@ > #include "conntrack.h" > #include "vport.h" > #include "flow_netlink.h" > +#include "openvswitch_trace.h" > > struct deferred_action { > struct sk_buff *skb; > @@ -1242,6 +1243,9 @@ static int do_execute_actions(struct datapath *dp, struct sk_buff *skb, > a = nla_next(a, &rem)) { > int err = 0; > > + if (trace_openvswitch_probe_action_enabled()) > + trace_openvswitch_probe_action(dp, skb, key, a, rem); > + > switch (nla_type(a)) { > case OVS_ACTION_ATTR_OUTPUT: { > int port = nla_get_u32(a); > diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c > index 9d6ef6cb9b26..63f19a6ed472 100644 > --- a/net/openvswitch/datapath.c > +++ b/net/openvswitch/datapath.c > @@ -43,6 +43,7 @@ > #include "flow_table.h" > #include "flow_netlink.h" > #include "meter.h" > +#include "openvswitch_trace.h" > #include "vport-internal_dev.h" > #include "vport-netdev.h" > > @@ -275,6 +276,12 @@ int ovs_dp_upcall(struct datapath *dp, struct sk_buff *skb, > struct dp_stats_percpu *stats; > int err; > > + if (trace_openvswitch_probe_userspace_enabled()) { > + struct sw_flow_key ukey = *key; > + > + trace_openvswitch_probe_userspace(dp, skb, &ukey, upcall_info); > + } > > Rather than work around the const here, can we not fix this in the trace include? Done. > TP_PROTO(struct datapath *dp, struct sk_buff *skb, > > * struct sw_flow_key *key, > > * const struct sw_flow_key *key, > const struct dp_upcall_info *upcall_info), > > @@ -97,7 +97,7 @@ TRACE_EVENT(openvswitch_probe_userspace, > __field( u16, gso_type ) > __field( u32, ovs_flow_hash ) > __field( u32, recirc_id ) > > * __field( void *, keyaddr ) > > * __field( const void *, keyaddr ) > __field( u16, key_eth_type ) > > + > if (upcall_info->portid == 0) { > err = -ENOTCONN; > goto err; > diff --git a/net/openvswitch/openvswitch_trace.c b/net/openvswitch/openvswitch_trace.c > new file mode 100644 > index 000000000000..62c5f7d6f023 > --- /dev/null > +++ b/net/openvswitch/openvswitch_trace.c > @@ -0,0 +1,10 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* bug in tracepoint.h, it should include this */ > +#include <linux/module.h> > + > +/* sparse isn't too happy with all macros... */ > +#ifndef __CHECKER__ > +#define CREATE_TRACE_POINTS > +#include "openvswitch_trace.h" > + > +#endif > diff --git a/net/openvswitch/openvswitch_trace.h b/net/openvswitch/openvswitch_trace.h > new file mode 100644 > index 000000000000..1b350306f622 > --- /dev/null > +++ b/net/openvswitch/openvswitch_trace.h > @@ -0,0 +1,152 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +#undef TRACE_SYSTEM > +#define TRACE_SYSTEM openvswitch > + > +#if !defined(_TRACE_OPENVSWITCH_H) || defined(TRACE_HEADER_MULTI_READ) > +#define _TRACE_OPENVSWITCH_H > + > +#include <linux/tracepoint.h> > + > +#include "datapath.h" > + > > I guess the naming of the events can be a long debate :) But I think just adding the word “probe” doesn’t help much. > > Maybe for just for function entry/exit, we could do something like <subsys>_<function_name>_entry/exit. I’ve seen > this used in other components. For example: > > openvswitch_probe_userspace -> openvswitch_ovs_dp_upcall_entry > > For none entry/exit trace macros, we could either use a specific name, as we have: > > openvswitch_probe_action -> openvswitch_execute_action > > Or maybe even prepended by the function name to easily locate it. For example: > > openvswitch_probe_action -> openvswitch_do_execute_actions__execute_action > > I like the double underscore to differentiate, so it might even be nice for the __entry, so > openvswitch_ovs_dp_upcall__entry. > > Maybe we should also change openvswitch to ovs for both system and events? Or is this too short and might cause > confusion? I agree that we can make these more descriptive, and that 'probe' doesn't add much. OTOH, if I use "openvswitch_do_execute_actions__execute_action" or the corresponding upcall trace point name, the line lengths balloon. I don't see that it's as useful to say both 'do_execute_actions' and '__execute_action' - I don't think there will ever be a reason to add an additional tracepoint here since the bulk of processing happens during the action loop. But maybe something like: 'openvswitch_execute_action' and 'openvswitch_dp_upcall' ? Just want to get this part right. > +TRACE_EVENT(openvswitch_probe_action, > + > + TP_PROTO(struct datapath *dp, struct sk_buff *skb, > + struct sw_flow_key *key, const struct nlattr *a, int rem), > + > + TP_ARGS(dp, skb, key, a, rem), > + > + TP_STRUCT__entry( > + __field( void *, dpaddr ) > + __string( dp_name, ovs_dp_name(dp) ) > + __string( dev_name, skb->dev->name ) > + __field( void *, skbaddr ) > + __field( unsigned int, len ) > + __field( unsigned int, data_len ) > + __field( unsigned int, truesize ) > + __field( u8, nr_frags ) > + __field( u16, gso_size ) > + __field( u16, gso_type ) > + __field( u32, ovs_flow_hash ) > + __field( u32, recirc_id ) > + __field( void *, keyaddr ) > + __field( u16, key_eth_type ) > + __field( u8, key_ct_state ) > + __field( u8, key_ct_orig_proto ) > + __field( unsigned int, flow_key_valid ) > + __field( u8, action_type ) > + __field( unsigned int, action_len ) > + __field( void *, action_data ) > + __field( u8, is_last ) > + ), > + > + TP_fast_assign( > + __entry->dpaddr = dp; > + __assign_str(dp_name, ovs_dp_name(dp)); > + __assign_str(dev_name, skb->dev->name); > + __entry->skbaddr = skb; > + __entry->len = skb->len; > + __entry->data_len = skb->data_len; > + __entry->truesize = skb->truesize; > + __entry->nr_frags = skb_shinfo(skb)->nr_frags; > + __entry->gso_size = skb_shinfo(skb)->gso_size; > + __entry->gso_type = skb_shinfo(skb)->gso_type; > + __entry->ovs_flow_hash = key->ovs_flow_hash; > + __entry->recirc_id = key->recirc_id; > + __entry->keyaddr = key; > + __entry->key_eth_type = key->eth.type; > + __entry->key_ct_state = key->ct_state; > + __entry->key_ct_orig_proto = key->ct_orig_proto; > + __entry->flow_key_valid = !(key->mac_proto & SW_FLOW_KEY_INVALID); > + __entry->action_type = nla_type(a); > + __entry->action_len = nla_len(a); > + __entry->action_data = nla_data(a); > + __entry->is_last = nla_is_last(a, rem); > + ), > + > + TP_printk("dpaddr=%p dp_name=%s dev=%s skbaddr=%p len=%u data_len=%u truesize=%u nr_frags=%d > gso_size=%d gso_type=%#x ovs_flow_hash=0x%08x recirc_id=0x%08x keyaddr=%p eth_type=0x%04x > ct_state=%02x ct_orig_proto=%02x flow_key_valid=%d action_type=%u action_len=%u action_data=%p > is_last=%d", > > I guess %p will be good enough here, as I see no other trace modules use %px. But I guess, for some of the values > %*ph might be useful, as it will dump the bytes, i.e., action_data. The issue with using %*ph for action_data is in the cases where a netlink attribute doesn't have data. In that case, we don't have any bytes to print, and I think the behavior would be undefined (see ct_clear action, or pop_eth action, etc). > + __entry->dpaddr, __get_str(dp_name), __get_str(dev_name), > + __entry->skbaddr, __entry->len, __entry->data_len, > + __entry->truesize, __entry->nr_frags, __entry->gso_size, > + __entry->gso_type, __entry->ovs_flow_hash, > + __entry->recirc_id, __entry->keyaddr, __entry->key_eth_type, > + __entry->key_ct_state, __entry->key_ct_orig_proto, > + __entry->flow_key_valid, > + __entry->action_type, __entry->action_len, > + __entry->action_data, __entry->is_last) > +); > + > +TRACE_EVENT(openvswitch_probe_userspace, > + > + TP_PROTO(struct datapath *dp, struct sk_buff *skb, > + struct sw_flow_key *key, > + const struct dp_upcall_info *upcall_info), > + > + TP_ARGS(dp, skb, key, upcall_info), > + > + TP_STRUCT__entry( > + __field( void *, dpaddr ) > + __string( dp_name, ovs_dp_name(dp) ) > + __string( dev_name, skb->dev->name ) > + __field( void *, skbaddr ) > + __field( unsigned int, len ) > + __field( unsigned int, data_len ) > + __field( unsigned int, truesize ) > + __field( u8, nr_frags ) > + __field( u16, gso_size ) > + __field( u16, gso_type ) > + __field( u32, ovs_flow_hash ) > + __field( u32, recirc_id ) > + __field( void *, keyaddr ) > + __field( u16, key_eth_type ) > + __field( u8, key_ct_state ) > + __field( u8, key_ct_orig_proto ) > + __field( unsigned int, flow_key_valid ) > + __field( u8, upcall_cmd ) > + __field( u32, upcall_port ) > + __field( u16, upcall_mru ) > + ), > + > + TP_fast_assign( > + __entry->dpaddr = dp; > + __assign_str(dp_name, ovs_dp_name(dp)); > + __assign_str(dev_name, skb->dev->name); > + __entry->skbaddr = skb; > + __entry->len = skb->len; > + __entry->data_len = skb->data_len; > + __entry->truesize = skb->truesize; > + __entry->nr_frags = skb_shinfo(skb)->nr_frags; > + __entry->gso_size = skb_shinfo(skb)->gso_size; > + __entry->gso_type = skb_shinfo(skb)->gso_type; > + __entry->ovs_flow_hash = key->ovs_flow_hash; > + __entry->recirc_id = key->recirc_id; > + __entry->keyaddr = key; > + __entry->key_eth_type = key->eth.type; > + __entry->key_ct_state = key->ct_state; > + __entry->key_ct_orig_proto = key->ct_orig_proto; > + __entry->flow_key_valid = !(key->mac_proto & SW_FLOW_KEY_INVALID); > + __entry->upcall_cmd = upcall_info->cmd; > + __entry->upcall_port = upcall_info->portid; > + __entry->upcall_mru = upcall_info->mru; > + ), > + > + TP_printk("dpaddr=%p dp_name=%s dev=%s skbaddr=%p len=%u data_len=%u truesize=%u nr_frags=%d > gso_size=%d gso_type=%#x ovs_flow_hash=0x%08x recirc_id=0x%08x keyaddr=%p eth_type=0x%04x > ct_state=%02x ct_orig_proto=%02x flow_key_valid=%d upcall_cmd=%u upcall_port=%u upcall_mru=%u", > > See %p comment above. Same applies. > + __entry->dpaddr, __get_str(dp_name), __get_str(dev_name), > + __entry->skbaddr, __entry->len, __entry->data_len, > + __entry->truesize, __entry->nr_frags, __entry->gso_size, > + __entry->gso_type, __entry->ovs_flow_hash, > + __entry->recirc_id, __entry->keyaddr, __entry->key_eth_type, > + __entry->key_ct_state, __entry->key_ct_orig_proto, > + __entry->flow_key_valid, > + __entry->upcall_cmd, __entry->upcall_port, > + __entry->upcall_mru) > +); > + > +#endif /* _TRACE_OPENVSWITCH_H */ > + > +/* This part must be outside protection */ > +#undef TRACE_INCLUDE_PATH > +#define TRACE_INCLUDE_PATH . > +#undef TRACE_INCLUDE_FILE > +#define TRACE_INCLUDE_FILE openvswitch_trace > +#include <trace/define_trace.h> > -- > 2.31.1
On 5/27/21 9:15 PM, Aaron Conole wrote: > This makes openvswitch module use the event tracing framework > to log the upcall interface and action execution pipeline. When > using openvswitch as the packet forwarding engine, some types of > debugging are made possible simply by using the ovs-vswitchd's > ofproto/trace command. However, such a command has some > limitations: > > 1. When trying to trace packets that go through the CT action, > the state of the packet can't be determined, and probably > would be potentially wrong. > > 2. Deducing problem packets can sometimes be difficult as well > even if many of the flows are known > > 3. It's possible to use the openvswitch module even without > the ovs-vswitchd (although, not common use). > > Introduce the event tracing points here to make it possible for > working through these problems in kernel space. The style is > copied from the mac80211 driver-trace / trace code for > consistency. > > Signed-off-by: Aaron Conole <aconole@redhat.com> > --- Hi Aaron, > net/openvswitch/Makefile | 3 + > net/openvswitch/actions.c | 4 + > net/openvswitch/datapath.c | 7 ++ > net/openvswitch/openvswitch_trace.c | 10 ++ > net/openvswitch/openvswitch_trace.h | 152 ++++++++++++++++++++++++++++ > 5 files changed, 176 insertions(+) > create mode 100644 net/openvswitch/openvswitch_trace.c > create mode 100644 net/openvswitch/openvswitch_trace.h > > diff --git a/net/openvswitch/Makefile b/net/openvswitch/Makefile > index 41109c326f3a..28982630bef3 100644 > --- a/net/openvswitch/Makefile > +++ b/net/openvswitch/Makefile > @@ -13,6 +13,7 @@ openvswitch-y := \ > flow_netlink.o \ > flow_table.o \ > meter.o \ > + openvswitch_trace.o \ > vport.o \ > vport-internal_dev.o \ > vport-netdev.o > @@ -24,3 +25,5 @@ endif > obj-$(CONFIG_OPENVSWITCH_VXLAN)+= vport-vxlan.o > obj-$(CONFIG_OPENVSWITCH_GENEVE)+= vport-geneve.o > obj-$(CONFIG_OPENVSWITCH_GRE) += vport-gre.o > + > +CFLAGS_openvswitch_trace.o = -I$(src) > diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c > index d858ea580e43..62285453ca79 100644 > --- a/net/openvswitch/actions.c > +++ b/net/openvswitch/actions.c > @@ -30,6 +30,7 @@ > #include "conntrack.h" > #include "vport.h" > #include "flow_netlink.h" > +#include "openvswitch_trace.h" > > struct deferred_action { > struct sk_buff *skb; > @@ -1242,6 +1243,9 @@ static int do_execute_actions(struct datapath *dp, struct sk_buff *skb, > a = nla_next(a, &rem)) { > int err = 0; > > + if (trace_openvswitch_probe_action_enabled()) > + trace_openvswitch_probe_action(dp, skb, key, a, rem); > + > switch (nla_type(a)) { > case OVS_ACTION_ATTR_OUTPUT: { > int port = nla_get_u32(a); > diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c > index 9d6ef6cb9b26..63f19a6ed472 100644 > --- a/net/openvswitch/datapath.c > +++ b/net/openvswitch/datapath.c > @@ -43,6 +43,7 @@ > #include "flow_table.h" > #include "flow_netlink.h" > #include "meter.h" > +#include "openvswitch_trace.h" > #include "vport-internal_dev.h" > #include "vport-netdev.h" > > @@ -275,6 +276,12 @@ int ovs_dp_upcall(struct datapath *dp, struct sk_buff *skb, > struct dp_stats_percpu *stats; > int err; > > + if (trace_openvswitch_probe_userspace_enabled()) { > + struct sw_flow_key ukey = *key; > + > + trace_openvswitch_probe_userspace(dp, skb, &ukey, upcall_info); > + } > + > if (upcall_info->portid == 0) { > err = -ENOTCONN; > goto err; > diff --git a/net/openvswitch/openvswitch_trace.c b/net/openvswitch/openvswitch_trace.c > new file mode 100644 > index 000000000000..62c5f7d6f023 > --- /dev/null > +++ b/net/openvswitch/openvswitch_trace.c > @@ -0,0 +1,10 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* bug in tracepoint.h, it should include this */ > +#include <linux/module.h> > + > +/* sparse isn't too happy with all macros... */ > +#ifndef __CHECKER__ > +#define CREATE_TRACE_POINTS > +#include "openvswitch_trace.h" > + > +#endif > diff --git a/net/openvswitch/openvswitch_trace.h b/net/openvswitch/openvswitch_trace.h > new file mode 100644 > index 000000000000..1b350306f622 > --- /dev/null > +++ b/net/openvswitch/openvswitch_trace.h > @@ -0,0 +1,152 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +#undef TRACE_SYSTEM > +#define TRACE_SYSTEM openvswitch > + > +#if !defined(_TRACE_OPENVSWITCH_H) || defined(TRACE_HEADER_MULTI_READ) > +#define _TRACE_OPENVSWITCH_H > + > +#include <linux/tracepoint.h> > + > +#include "datapath.h" > + > +TRACE_EVENT(openvswitch_probe_action, > + > + TP_PROTO(struct datapath *dp, struct sk_buff *skb, > + struct sw_flow_key *key, const struct nlattr *a, int rem), > + > + TP_ARGS(dp, skb, key, a, rem), > + > + TP_STRUCT__entry( > + __field( void *, dpaddr ) > + __string( dp_name, ovs_dp_name(dp) ) > + __string( dev_name, skb->dev->name ) > + __field( void *, skbaddr ) > + __field( unsigned int, len ) > + __field( unsigned int, data_len ) > + __field( unsigned int, truesize ) > + __field( u8, nr_frags ) > + __field( u16, gso_size ) > + __field( u16, gso_type ) > + __field( u32, ovs_flow_hash ) > + __field( u32, recirc_id ) > + __field( void *, keyaddr ) > + __field( u16, key_eth_type ) > + __field( u8, key_ct_state ) > + __field( u8, key_ct_orig_proto ) I think tracing ct_zone would be useful too. > + __field( unsigned int, flow_key_valid ) > + __field( u8, action_type ) > + __field( unsigned int, action_len ) > + __field( void *, action_data ) > + __field( u8, is_last ) > + ), > + > + TP_fast_assign( > + __entry->dpaddr = dp; > + __assign_str(dp_name, ovs_dp_name(dp)); > + __assign_str(dev_name, skb->dev->name); > + __entry->skbaddr = skb; > + __entry->len = skb->len; > + __entry->data_len = skb->data_len; > + __entry->truesize = skb->truesize; > + __entry->nr_frags = skb_shinfo(skb)->nr_frags; > + __entry->gso_size = skb_shinfo(skb)->gso_size; > + __entry->gso_type = skb_shinfo(skb)->gso_type; > + __entry->ovs_flow_hash = key->ovs_flow_hash; > + __entry->recirc_id = key->recirc_id; > + __entry->keyaddr = key; > + __entry->key_eth_type = key->eth.type; > + __entry->key_ct_state = key->ct_state; > + __entry->key_ct_orig_proto = key->ct_orig_proto; > + __entry->flow_key_valid = !(key->mac_proto & SW_FLOW_KEY_INVALID); > + __entry->action_type = nla_type(a); > + __entry->action_len = nla_len(a); > + __entry->action_data = nla_data(a); > + __entry->is_last = nla_is_last(a, rem); > + ), > + > + TP_printk("dpaddr=%p dp_name=%s dev=%s skbaddr=%p len=%u data_len=%u truesize=%u nr_frags=%d gso_size=%d gso_type=%#x ovs_flow_hash=0x%08x recirc_id=0x%08x keyaddr=%p eth_type=0x%04x ct_state=%02x ct_orig_proto=%02x flow_key_valid=%d action_type=%u action_len=%u action_data=%p is_last=%d", > + __entry->dpaddr, __get_str(dp_name), __get_str(dev_name), > + __entry->skbaddr, __entry->len, __entry->data_len, > + __entry->truesize, __entry->nr_frags, __entry->gso_size, > + __entry->gso_type, __entry->ovs_flow_hash, > + __entry->recirc_id, __entry->keyaddr, __entry->key_eth_type, > + __entry->key_ct_state, __entry->key_ct_orig_proto, > + __entry->flow_key_valid, > + __entry->action_type, __entry->action_len, > + __entry->action_data, __entry->is_last) > +); > + > +TRACE_EVENT(openvswitch_probe_userspace, > + > + TP_PROTO(struct datapath *dp, struct sk_buff *skb, > + struct sw_flow_key *key, > + const struct dp_upcall_info *upcall_info), > + > + TP_ARGS(dp, skb, key, upcall_info), > + > + TP_STRUCT__entry( > + __field( void *, dpaddr ) > + __string( dp_name, ovs_dp_name(dp) ) > + __string( dev_name, skb->dev->name ) > + __field( void *, skbaddr ) > + __field( unsigned int, len ) > + __field( unsigned int, data_len ) > + __field( unsigned int, truesize ) > + __field( u8, nr_frags ) > + __field( u16, gso_size ) > + __field( u16, gso_type ) > + __field( u32, ovs_flow_hash ) > + __field( u32, recirc_id ) > + __field( void *, keyaddr ) > + __field( u16, key_eth_type ) > + __field( u8, key_ct_state ) > + __field( u8, key_ct_orig_proto ) Same here. Thanks, Dumitru > + __field( unsigned int, flow_key_valid ) > + __field( u8, upcall_cmd ) > + __field( u32, upcall_port ) > + __field( u16, upcall_mru ) > + ), > + > + TP_fast_assign( > + __entry->dpaddr = dp; > + __assign_str(dp_name, ovs_dp_name(dp)); > + __assign_str(dev_name, skb->dev->name); > + __entry->skbaddr = skb; > + __entry->len = skb->len; > + __entry->data_len = skb->data_len; > + __entry->truesize = skb->truesize; > + __entry->nr_frags = skb_shinfo(skb)->nr_frags; > + __entry->gso_size = skb_shinfo(skb)->gso_size; > + __entry->gso_type = skb_shinfo(skb)->gso_type; > + __entry->ovs_flow_hash = key->ovs_flow_hash; > + __entry->recirc_id = key->recirc_id; > + __entry->keyaddr = key; > + __entry->key_eth_type = key->eth.type; > + __entry->key_ct_state = key->ct_state; > + __entry->key_ct_orig_proto = key->ct_orig_proto; > + __entry->flow_key_valid = !(key->mac_proto & SW_FLOW_KEY_INVALID); > + __entry->upcall_cmd = upcall_info->cmd; > + __entry->upcall_port = upcall_info->portid; > + __entry->upcall_mru = upcall_info->mru; > + ), > + > + TP_printk("dpaddr=%p dp_name=%s dev=%s skbaddr=%p len=%u data_len=%u truesize=%u nr_frags=%d gso_size=%d gso_type=%#x ovs_flow_hash=0x%08x recirc_id=0x%08x keyaddr=%p eth_type=0x%04x ct_state=%02x ct_orig_proto=%02x flow_key_valid=%d upcall_cmd=%u upcall_port=%u upcall_mru=%u", > + __entry->dpaddr, __get_str(dp_name), __get_str(dev_name), > + __entry->skbaddr, __entry->len, __entry->data_len, > + __entry->truesize, __entry->nr_frags, __entry->gso_size, > + __entry->gso_type, __entry->ovs_flow_hash, > + __entry->recirc_id, __entry->keyaddr, __entry->key_eth_type, > + __entry->key_ct_state, __entry->key_ct_orig_proto, > + __entry->flow_key_valid, > + __entry->upcall_cmd, __entry->upcall_port, > + __entry->upcall_mru) > +); > + > +#endif /* _TRACE_OPENVSWITCH_H */ > + > +/* This part must be outside protection */ > +#undef TRACE_INCLUDE_PATH > +#define TRACE_INCLUDE_PATH . > +#undef TRACE_INCLUDE_FILE > +#define TRACE_INCLUDE_FILE openvswitch_trace > +#include <trace/define_trace.h> >
Dumitru Ceara <dceara@redhat.com> writes: > On 5/27/21 9:15 PM, Aaron Conole wrote: >> This makes openvswitch module use the event tracing framework >> to log the upcall interface and action execution pipeline. When >> using openvswitch as the packet forwarding engine, some types of >> debugging are made possible simply by using the ovs-vswitchd's >> ofproto/trace command. However, such a command has some >> limitations: >> >> 1. When trying to trace packets that go through the CT action, >> the state of the packet can't be determined, and probably >> would be potentially wrong. >> >> 2. Deducing problem packets can sometimes be difficult as well >> even if many of the flows are known >> >> 3. It's possible to use the openvswitch module even without >> the ovs-vswitchd (although, not common use). >> >> Introduce the event tracing points here to make it possible for >> working through these problems in kernel space. The style is >> copied from the mac80211 driver-trace / trace code for >> consistency. >> >> Signed-off-by: Aaron Conole <aconole@redhat.com> >> --- > > Hi Aaron, Hi Dumitru, >> net/openvswitch/Makefile | 3 + >> net/openvswitch/actions.c | 4 + >> net/openvswitch/datapath.c | 7 ++ >> net/openvswitch/openvswitch_trace.c | 10 ++ >> net/openvswitch/openvswitch_trace.h | 152 ++++++++++++++++++++++++++++ >> 5 files changed, 176 insertions(+) >> create mode 100644 net/openvswitch/openvswitch_trace.c >> create mode 100644 net/openvswitch/openvswitch_trace.h >> >> diff --git a/net/openvswitch/Makefile b/net/openvswitch/Makefile >> index 41109c326f3a..28982630bef3 100644 >> --- a/net/openvswitch/Makefile >> +++ b/net/openvswitch/Makefile >> @@ -13,6 +13,7 @@ openvswitch-y := \ >> flow_netlink.o \ >> flow_table.o \ >> meter.o \ >> + openvswitch_trace.o \ >> vport.o \ >> vport-internal_dev.o \ >> vport-netdev.o >> @@ -24,3 +25,5 @@ endif >> obj-$(CONFIG_OPENVSWITCH_VXLAN)+= vport-vxlan.o >> obj-$(CONFIG_OPENVSWITCH_GENEVE)+= vport-geneve.o >> obj-$(CONFIG_OPENVSWITCH_GRE) += vport-gre.o >> + >> +CFLAGS_openvswitch_trace.o = -I$(src) >> diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c >> index d858ea580e43..62285453ca79 100644 >> --- a/net/openvswitch/actions.c >> +++ b/net/openvswitch/actions.c >> @@ -30,6 +30,7 @@ >> #include "conntrack.h" >> #include "vport.h" >> #include "flow_netlink.h" >> +#include "openvswitch_trace.h" >> >> struct deferred_action { >> struct sk_buff *skb; >> @@ -1242,6 +1243,9 @@ static int do_execute_actions(struct datapath *dp, struct sk_buff *skb, >> a = nla_next(a, &rem)) { >> int err = 0; >> >> + if (trace_openvswitch_probe_action_enabled()) >> + trace_openvswitch_probe_action(dp, skb, key, a, rem); >> + >> switch (nla_type(a)) { >> case OVS_ACTION_ATTR_OUTPUT: { >> int port = nla_get_u32(a); >> diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c >> index 9d6ef6cb9b26..63f19a6ed472 100644 >> --- a/net/openvswitch/datapath.c >> +++ b/net/openvswitch/datapath.c >> @@ -43,6 +43,7 @@ >> #include "flow_table.h" >> #include "flow_netlink.h" >> #include "meter.h" >> +#include "openvswitch_trace.h" >> #include "vport-internal_dev.h" >> #include "vport-netdev.h" >> >> @@ -275,6 +276,12 @@ int ovs_dp_upcall(struct datapath *dp, struct sk_buff *skb, >> struct dp_stats_percpu *stats; >> int err; >> >> + if (trace_openvswitch_probe_userspace_enabled()) { >> + struct sw_flow_key ukey = *key; >> + >> + trace_openvswitch_probe_userspace(dp, skb, &ukey, upcall_info); >> + } >> + >> if (upcall_info->portid == 0) { >> err = -ENOTCONN; >> goto err; >> diff --git a/net/openvswitch/openvswitch_trace.c b/net/openvswitch/openvswitch_trace.c >> new file mode 100644 >> index 000000000000..62c5f7d6f023 >> --- /dev/null >> +++ b/net/openvswitch/openvswitch_trace.c >> @@ -0,0 +1,10 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* bug in tracepoint.h, it should include this */ >> +#include <linux/module.h> >> + >> +/* sparse isn't too happy with all macros... */ >> +#ifndef __CHECKER__ >> +#define CREATE_TRACE_POINTS >> +#include "openvswitch_trace.h" >> + >> +#endif >> diff --git a/net/openvswitch/openvswitch_trace.h b/net/openvswitch/openvswitch_trace.h >> new file mode 100644 >> index 000000000000..1b350306f622 >> --- /dev/null >> +++ b/net/openvswitch/openvswitch_trace.h >> @@ -0,0 +1,152 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ >> +#undef TRACE_SYSTEM >> +#define TRACE_SYSTEM openvswitch >> + >> +#if !defined(_TRACE_OPENVSWITCH_H) || defined(TRACE_HEADER_MULTI_READ) >> +#define _TRACE_OPENVSWITCH_H >> + >> +#include <linux/tracepoint.h> >> + >> +#include "datapath.h" >> + >> +TRACE_EVENT(openvswitch_probe_action, >> + >> + TP_PROTO(struct datapath *dp, struct sk_buff *skb, >> + struct sw_flow_key *key, const struct nlattr *a, int rem), >> + >> + TP_ARGS(dp, skb, key, a, rem), >> + >> + TP_STRUCT__entry( >> + __field( void *, dpaddr ) >> + __string( dp_name, ovs_dp_name(dp) ) >> + __string( dev_name, skb->dev->name ) >> + __field( void *, skbaddr ) >> + __field( unsigned int, len ) >> + __field( unsigned int, data_len ) >> + __field( unsigned int, truesize ) >> + __field( u8, nr_frags ) >> + __field( u16, gso_size ) >> + __field( u16, gso_type ) >> + __field( u32, ovs_flow_hash ) >> + __field( u32, recirc_id ) >> + __field( void *, keyaddr ) >> + __field( u16, key_eth_type ) >> + __field( u8, key_ct_state ) >> + __field( u8, key_ct_orig_proto ) > > I think tracing ct_zone would be useful too. ACK, I'll add it. I will post a new version today. Thanks for the review! >> + __field( unsigned int, flow_key_valid ) >> + __field( u8, action_type ) >> + __field( unsigned int, action_len ) >> + __field( void *, action_data ) >> + __field( u8, is_last ) >> + ), >> + >> + TP_fast_assign( >> + __entry->dpaddr = dp; >> + __assign_str(dp_name, ovs_dp_name(dp)); >> + __assign_str(dev_name, skb->dev->name); >> + __entry->skbaddr = skb; >> + __entry->len = skb->len; >> + __entry->data_len = skb->data_len; >> + __entry->truesize = skb->truesize; >> + __entry->nr_frags = skb_shinfo(skb)->nr_frags; >> + __entry->gso_size = skb_shinfo(skb)->gso_size; >> + __entry->gso_type = skb_shinfo(skb)->gso_type; >> + __entry->ovs_flow_hash = key->ovs_flow_hash; >> + __entry->recirc_id = key->recirc_id; >> + __entry->keyaddr = key; >> + __entry->key_eth_type = key->eth.type; >> + __entry->key_ct_state = key->ct_state; >> + __entry->key_ct_orig_proto = key->ct_orig_proto; >> + __entry->flow_key_valid = !(key->mac_proto & SW_FLOW_KEY_INVALID); >> + __entry->action_type = nla_type(a); >> + __entry->action_len = nla_len(a); >> + __entry->action_data = nla_data(a); >> + __entry->is_last = nla_is_last(a, rem); >> + ), >> + >> + TP_printk("dpaddr=%p dp_name=%s dev=%s skbaddr=%p len=%u >> data_len=%u truesize=%u nr_frags=%d gso_size=%d gso_type=%#x >> ovs_flow_hash=0x%08x recirc_id=0x%08x keyaddr=%p eth_type=0x%04x >> ct_state=%02x ct_orig_proto=%02x flow_key_valid=%d action_type=%u >> action_len=%u action_data=%p is_last=%d", >> + __entry->dpaddr, __get_str(dp_name), __get_str(dev_name), >> + __entry->skbaddr, __entry->len, __entry->data_len, >> + __entry->truesize, __entry->nr_frags, __entry->gso_size, >> + __entry->gso_type, __entry->ovs_flow_hash, >> + __entry->recirc_id, __entry->keyaddr, __entry->key_eth_type, >> + __entry->key_ct_state, __entry->key_ct_orig_proto, >> + __entry->flow_key_valid, >> + __entry->action_type, __entry->action_len, >> + __entry->action_data, __entry->is_last) >> +); >> + >> +TRACE_EVENT(openvswitch_probe_userspace, >> + >> + TP_PROTO(struct datapath *dp, struct sk_buff *skb, >> + struct sw_flow_key *key, >> + const struct dp_upcall_info *upcall_info), >> + >> + TP_ARGS(dp, skb, key, upcall_info), >> + >> + TP_STRUCT__entry( >> + __field( void *, dpaddr ) >> + __string( dp_name, ovs_dp_name(dp) ) >> + __string( dev_name, skb->dev->name ) >> + __field( void *, skbaddr ) >> + __field( unsigned int, len ) >> + __field( unsigned int, data_len ) >> + __field( unsigned int, truesize ) >> + __field( u8, nr_frags ) >> + __field( u16, gso_size ) >> + __field( u16, gso_type ) >> + __field( u32, ovs_flow_hash ) >> + __field( u32, recirc_id ) >> + __field( void *, keyaddr ) >> + __field( u16, key_eth_type ) >> + __field( u8, key_ct_state ) >> + __field( u8, key_ct_orig_proto ) > > Same here. > > Thanks, > Dumitru > >> + __field( unsigned int, flow_key_valid ) >> + __field( u8, upcall_cmd ) >> + __field( u32, upcall_port ) >> + __field( u16, upcall_mru ) >> + ), >> + >> + TP_fast_assign( >> + __entry->dpaddr = dp; >> + __assign_str(dp_name, ovs_dp_name(dp)); >> + __assign_str(dev_name, skb->dev->name); >> + __entry->skbaddr = skb; >> + __entry->len = skb->len; >> + __entry->data_len = skb->data_len; >> + __entry->truesize = skb->truesize; >> + __entry->nr_frags = skb_shinfo(skb)->nr_frags; >> + __entry->gso_size = skb_shinfo(skb)->gso_size; >> + __entry->gso_type = skb_shinfo(skb)->gso_type; >> + __entry->ovs_flow_hash = key->ovs_flow_hash; >> + __entry->recirc_id = key->recirc_id; >> + __entry->keyaddr = key; >> + __entry->key_eth_type = key->eth.type; >> + __entry->key_ct_state = key->ct_state; >> + __entry->key_ct_orig_proto = key->ct_orig_proto; >> + __entry->flow_key_valid = !(key->mac_proto & SW_FLOW_KEY_INVALID); >> + __entry->upcall_cmd = upcall_info->cmd; >> + __entry->upcall_port = upcall_info->portid; >> + __entry->upcall_mru = upcall_info->mru; >> + ), >> + >> + TP_printk("dpaddr=%p dp_name=%s dev=%s skbaddr=%p len=%u >> data_len=%u truesize=%u nr_frags=%d gso_size=%d gso_type=%#x >> ovs_flow_hash=0x%08x recirc_id=0x%08x keyaddr=%p eth_type=0x%04x >> ct_state=%02x ct_orig_proto=%02x flow_key_valid=%d upcall_cmd=%u >> upcall_port=%u upcall_mru=%u", >> + __entry->dpaddr, __get_str(dp_name), __get_str(dev_name), >> + __entry->skbaddr, __entry->len, __entry->data_len, >> + __entry->truesize, __entry->nr_frags, __entry->gso_size, >> + __entry->gso_type, __entry->ovs_flow_hash, >> + __entry->recirc_id, __entry->keyaddr, __entry->key_eth_type, >> + __entry->key_ct_state, __entry->key_ct_orig_proto, >> + __entry->flow_key_valid, >> + __entry->upcall_cmd, __entry->upcall_port, >> + __entry->upcall_mru) >> +); >> + >> +#endif /* _TRACE_OPENVSWITCH_H */ >> + >> +/* This part must be outside protection */ >> +#undef TRACE_INCLUDE_PATH >> +#define TRACE_INCLUDE_PATH . >> +#undef TRACE_INCLUDE_FILE >> +#define TRACE_INCLUDE_FILE openvswitch_trace >> +#include <trace/define_trace.h> >>
diff --git a/net/openvswitch/Makefile b/net/openvswitch/Makefile index 41109c326f3a..28982630bef3 100644 --- a/net/openvswitch/Makefile +++ b/net/openvswitch/Makefile @@ -13,6 +13,7 @@ openvswitch-y := \ flow_netlink.o \ flow_table.o \ meter.o \ + openvswitch_trace.o \ vport.o \ vport-internal_dev.o \ vport-netdev.o @@ -24,3 +25,5 @@ endif obj-$(CONFIG_OPENVSWITCH_VXLAN)+= vport-vxlan.o obj-$(CONFIG_OPENVSWITCH_GENEVE)+= vport-geneve.o obj-$(CONFIG_OPENVSWITCH_GRE) += vport-gre.o + +CFLAGS_openvswitch_trace.o = -I$(src) diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c index d858ea580e43..62285453ca79 100644 --- a/net/openvswitch/actions.c +++ b/net/openvswitch/actions.c @@ -30,6 +30,7 @@ #include "conntrack.h" #include "vport.h" #include "flow_netlink.h" +#include "openvswitch_trace.h" struct deferred_action { struct sk_buff *skb; @@ -1242,6 +1243,9 @@ static int do_execute_actions(struct datapath *dp, struct sk_buff *skb, a = nla_next(a, &rem)) { int err = 0; + if (trace_openvswitch_probe_action_enabled()) + trace_openvswitch_probe_action(dp, skb, key, a, rem); + switch (nla_type(a)) { case OVS_ACTION_ATTR_OUTPUT: { int port = nla_get_u32(a); diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c index 9d6ef6cb9b26..63f19a6ed472 100644 --- a/net/openvswitch/datapath.c +++ b/net/openvswitch/datapath.c @@ -43,6 +43,7 @@ #include "flow_table.h" #include "flow_netlink.h" #include "meter.h" +#include "openvswitch_trace.h" #include "vport-internal_dev.h" #include "vport-netdev.h" @@ -275,6 +276,12 @@ int ovs_dp_upcall(struct datapath *dp, struct sk_buff *skb, struct dp_stats_percpu *stats; int err; + if (trace_openvswitch_probe_userspace_enabled()) { + struct sw_flow_key ukey = *key; + + trace_openvswitch_probe_userspace(dp, skb, &ukey, upcall_info); + } + if (upcall_info->portid == 0) { err = -ENOTCONN; goto err; diff --git a/net/openvswitch/openvswitch_trace.c b/net/openvswitch/openvswitch_trace.c new file mode 100644 index 000000000000..62c5f7d6f023 --- /dev/null +++ b/net/openvswitch/openvswitch_trace.c @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 +/* bug in tracepoint.h, it should include this */ +#include <linux/module.h> + +/* sparse isn't too happy with all macros... */ +#ifndef __CHECKER__ +#define CREATE_TRACE_POINTS +#include "openvswitch_trace.h" + +#endif diff --git a/net/openvswitch/openvswitch_trace.h b/net/openvswitch/openvswitch_trace.h new file mode 100644 index 000000000000..1b350306f622 --- /dev/null +++ b/net/openvswitch/openvswitch_trace.h @@ -0,0 +1,152 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM openvswitch + +#if !defined(_TRACE_OPENVSWITCH_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_OPENVSWITCH_H + +#include <linux/tracepoint.h> + +#include "datapath.h" + +TRACE_EVENT(openvswitch_probe_action, + + TP_PROTO(struct datapath *dp, struct sk_buff *skb, + struct sw_flow_key *key, const struct nlattr *a, int rem), + + TP_ARGS(dp, skb, key, a, rem), + + TP_STRUCT__entry( + __field( void *, dpaddr ) + __string( dp_name, ovs_dp_name(dp) ) + __string( dev_name, skb->dev->name ) + __field( void *, skbaddr ) + __field( unsigned int, len ) + __field( unsigned int, data_len ) + __field( unsigned int, truesize ) + __field( u8, nr_frags ) + __field( u16, gso_size ) + __field( u16, gso_type ) + __field( u32, ovs_flow_hash ) + __field( u32, recirc_id ) + __field( void *, keyaddr ) + __field( u16, key_eth_type ) + __field( u8, key_ct_state ) + __field( u8, key_ct_orig_proto ) + __field( unsigned int, flow_key_valid ) + __field( u8, action_type ) + __field( unsigned int, action_len ) + __field( void *, action_data ) + __field( u8, is_last ) + ), + + TP_fast_assign( + __entry->dpaddr = dp; + __assign_str(dp_name, ovs_dp_name(dp)); + __assign_str(dev_name, skb->dev->name); + __entry->skbaddr = skb; + __entry->len = skb->len; + __entry->data_len = skb->data_len; + __entry->truesize = skb->truesize; + __entry->nr_frags = skb_shinfo(skb)->nr_frags; + __entry->gso_size = skb_shinfo(skb)->gso_size; + __entry->gso_type = skb_shinfo(skb)->gso_type; + __entry->ovs_flow_hash = key->ovs_flow_hash; + __entry->recirc_id = key->recirc_id; + __entry->keyaddr = key; + __entry->key_eth_type = key->eth.type; + __entry->key_ct_state = key->ct_state; + __entry->key_ct_orig_proto = key->ct_orig_proto; + __entry->flow_key_valid = !(key->mac_proto & SW_FLOW_KEY_INVALID); + __entry->action_type = nla_type(a); + __entry->action_len = nla_len(a); + __entry->action_data = nla_data(a); + __entry->is_last = nla_is_last(a, rem); + ), + + TP_printk("dpaddr=%p dp_name=%s dev=%s skbaddr=%p len=%u data_len=%u truesize=%u nr_frags=%d gso_size=%d gso_type=%#x ovs_flow_hash=0x%08x recirc_id=0x%08x keyaddr=%p eth_type=0x%04x ct_state=%02x ct_orig_proto=%02x flow_key_valid=%d action_type=%u action_len=%u action_data=%p is_last=%d", + __entry->dpaddr, __get_str(dp_name), __get_str(dev_name), + __entry->skbaddr, __entry->len, __entry->data_len, + __entry->truesize, __entry->nr_frags, __entry->gso_size, + __entry->gso_type, __entry->ovs_flow_hash, + __entry->recirc_id, __entry->keyaddr, __entry->key_eth_type, + __entry->key_ct_state, __entry->key_ct_orig_proto, + __entry->flow_key_valid, + __entry->action_type, __entry->action_len, + __entry->action_data, __entry->is_last) +); + +TRACE_EVENT(openvswitch_probe_userspace, + + TP_PROTO(struct datapath *dp, struct sk_buff *skb, + struct sw_flow_key *key, + const struct dp_upcall_info *upcall_info), + + TP_ARGS(dp, skb, key, upcall_info), + + TP_STRUCT__entry( + __field( void *, dpaddr ) + __string( dp_name, ovs_dp_name(dp) ) + __string( dev_name, skb->dev->name ) + __field( void *, skbaddr ) + __field( unsigned int, len ) + __field( unsigned int, data_len ) + __field( unsigned int, truesize ) + __field( u8, nr_frags ) + __field( u16, gso_size ) + __field( u16, gso_type ) + __field( u32, ovs_flow_hash ) + __field( u32, recirc_id ) + __field( void *, keyaddr ) + __field( u16, key_eth_type ) + __field( u8, key_ct_state ) + __field( u8, key_ct_orig_proto ) + __field( unsigned int, flow_key_valid ) + __field( u8, upcall_cmd ) + __field( u32, upcall_port ) + __field( u16, upcall_mru ) + ), + + TP_fast_assign( + __entry->dpaddr = dp; + __assign_str(dp_name, ovs_dp_name(dp)); + __assign_str(dev_name, skb->dev->name); + __entry->skbaddr = skb; + __entry->len = skb->len; + __entry->data_len = skb->data_len; + __entry->truesize = skb->truesize; + __entry->nr_frags = skb_shinfo(skb)->nr_frags; + __entry->gso_size = skb_shinfo(skb)->gso_size; + __entry->gso_type = skb_shinfo(skb)->gso_type; + __entry->ovs_flow_hash = key->ovs_flow_hash; + __entry->recirc_id = key->recirc_id; + __entry->keyaddr = key; + __entry->key_eth_type = key->eth.type; + __entry->key_ct_state = key->ct_state; + __entry->key_ct_orig_proto = key->ct_orig_proto; + __entry->flow_key_valid = !(key->mac_proto & SW_FLOW_KEY_INVALID); + __entry->upcall_cmd = upcall_info->cmd; + __entry->upcall_port = upcall_info->portid; + __entry->upcall_mru = upcall_info->mru; + ), + + TP_printk("dpaddr=%p dp_name=%s dev=%s skbaddr=%p len=%u data_len=%u truesize=%u nr_frags=%d gso_size=%d gso_type=%#x ovs_flow_hash=0x%08x recirc_id=0x%08x keyaddr=%p eth_type=0x%04x ct_state=%02x ct_orig_proto=%02x flow_key_valid=%d upcall_cmd=%u upcall_port=%u upcall_mru=%u", + __entry->dpaddr, __get_str(dp_name), __get_str(dev_name), + __entry->skbaddr, __entry->len, __entry->data_len, + __entry->truesize, __entry->nr_frags, __entry->gso_size, + __entry->gso_type, __entry->ovs_flow_hash, + __entry->recirc_id, __entry->keyaddr, __entry->key_eth_type, + __entry->key_ct_state, __entry->key_ct_orig_proto, + __entry->flow_key_valid, + __entry->upcall_cmd, __entry->upcall_port, + __entry->upcall_mru) +); + +#endif /* _TRACE_OPENVSWITCH_H */ + +/* This part must be outside protection */ +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH . +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_FILE openvswitch_trace +#include <trace/define_trace.h>
This makes openvswitch module use the event tracing framework to log the upcall interface and action execution pipeline. When using openvswitch as the packet forwarding engine, some types of debugging are made possible simply by using the ovs-vswitchd's ofproto/trace command. However, such a command has some limitations: 1. When trying to trace packets that go through the CT action, the state of the packet can't be determined, and probably would be potentially wrong. 2. Deducing problem packets can sometimes be difficult as well even if many of the flows are known 3. It's possible to use the openvswitch module even without the ovs-vswitchd (although, not common use). Introduce the event tracing points here to make it possible for working through these problems in kernel space. The style is copied from the mac80211 driver-trace / trace code for consistency. Signed-off-by: Aaron Conole <aconole@redhat.com> --- net/openvswitch/Makefile | 3 + net/openvswitch/actions.c | 4 + net/openvswitch/datapath.c | 7 ++ net/openvswitch/openvswitch_trace.c | 10 ++ net/openvswitch/openvswitch_trace.h | 152 ++++++++++++++++++++++++++++ 5 files changed, 176 insertions(+) create mode 100644 net/openvswitch/openvswitch_trace.c create mode 100644 net/openvswitch/openvswitch_trace.h