| Message ID | 20210621072424.111733-9-jagan@amarulasolutions.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: imx8mm: Add MIPI DSI support | expand |
On Mon, Jun 21, 2021 at 2:25 AM Jagan Teki <jagan@amarulasolutions.com> wrote: > > Add MIPI DSI pipeline for i.MX8MM. > > Video pipeline start from eLCDIF to MIPI DSI and respective > Panel or Bridge on the backend side. > > Add support for it. > > Cc: Rob Herring <robh+dt@kernel.org> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > arch/arm64/boot/dts/freescale/imx8mm.dtsi | 59 +++++++++++++++++++++++ > 1 file changed, 59 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi > index 5f68182ed3a6..bc09fce0f6a9 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi > @@ -1047,6 +1047,65 @@ lcdif: lcdif@32e00000 { > interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; > power-domains = <&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_LCDIF>; > status = "disabled"; > + > + port { > + lcdif_out_dsi: endpoint { > + remote-endpoint = <&dsi_in_lcdif>; > + }; > + }; > + }; > + > + dsi: dsi@32e10000 { > + compatible = "fsl,imx8mm-sec-dsim"; > + reg = <0x32e10000 0xa0>; > + clocks = <&clk IMX8MM_CLK_DSI_CORE>, > + <&clk IMX8MM_CLK_DSI_PHY_REF>; > + clock-names = "bus", "phy_ref"; > + assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>, > + <&clk IMX8MM_VIDEO_PLL1_OUT>, > + <&clk IMX8MM_CLK_DSI_PHY_REF>; > + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>, > + <&clk IMX8MM_VIDEO_PLL1_BYPASS>, > + <&clk IMX8MM_VIDEO_PLL1_OUT>; > + assigned-clock-rates = <266000000>, <594000000>, <27000000>; > + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; > + phys = <&dphy>; > + phy-names = "dphy"; > + power-domains = <&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_MIPI_DSI>; > + samsung,burst-clock-frequency = <891000000>; > + samsung,esc-clock-frequency = <54000000>; > + samsung,pll-clock-frequency = <27000000>; > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + dsi_in_lcdif: endpoint@0 { > + reg = <0>; When I build this with W=1, I get a warning: Warning (graph_child_address): /soc@0/bus@32c00000/dsi@32e10000/ports/port@0: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary Are there supposed to be two endpoints for port@0? > + remote-endpoint = <&lcdif_out_dsi>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + }; > + }; > + }; > + > + dphy: dphy@32e100a4 { > + compatible = "fsl,imx8mm-sec-dsim-dphy"; > + reg = <0x32e100a4 0xbc>; > + clocks = <&clk IMX8MM_CLK_DSI_PHY_REF>; > + clock-names = "phy_ref"; > + #phy-cells = <0>; > + power-domains = <&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_MIPI_DPHY>; > + status = "disabled"; > }; > > dispmix_blk_ctl: blk-ctl@32e28000 { > -- > 2.25.1 >
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 5f68182ed3a6..bc09fce0f6a9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -1047,6 +1047,65 @@ lcdif: lcdif@32e00000 { interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_LCDIF>; status = "disabled"; + + port { + lcdif_out_dsi: endpoint { + remote-endpoint = <&dsi_in_lcdif>; + }; + }; + }; + + dsi: dsi@32e10000 { + compatible = "fsl,imx8mm-sec-dsim"; + reg = <0x32e10000 0xa0>; + clocks = <&clk IMX8MM_CLK_DSI_CORE>, + <&clk IMX8MM_CLK_DSI_PHY_REF>; + clock-names = "bus", "phy_ref"; + assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>, + <&clk IMX8MM_VIDEO_PLL1_OUT>, + <&clk IMX8MM_CLK_DSI_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>, + <&clk IMX8MM_VIDEO_PLL1_BYPASS>, + <&clk IMX8MM_VIDEO_PLL1_OUT>; + assigned-clock-rates = <266000000>, <594000000>, <27000000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + phys = <&dphy>; + phy-names = "dphy"; + power-domains = <&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_MIPI_DSI>; + samsung,burst-clock-frequency = <891000000>; + samsung,esc-clock-frequency = <54000000>; + samsung,pll-clock-frequency = <27000000>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + dsi_in_lcdif: endpoint@0 { + reg = <0>; + remote-endpoint = <&lcdif_out_dsi>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + + dphy: dphy@32e100a4 { + compatible = "fsl,imx8mm-sec-dsim-dphy"; + reg = <0x32e100a4 0xbc>; + clocks = <&clk IMX8MM_CLK_DSI_PHY_REF>; + clock-names = "phy_ref"; + #phy-cells = <0>; + power-domains = <&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_MIPI_DPHY>; + status = "disabled"; }; dispmix_blk_ctl: blk-ctl@32e28000 {
Add MIPI DSI pipeline for i.MX8MM. Video pipeline start from eLCDIF to MIPI DSI and respective Panel or Bridge on the backend side. Add support for it. Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 59 +++++++++++++++++++++++ 1 file changed, 59 insertions(+)