diff mbox series

net/mlx5: remove "default n" from Kconfig

Message ID 20210617023215.176-1-caihuoqing@baidu.com (mailing list archive)
State Awaiting Upstream
Delegated to: Netdev Maintainers
Headers show
Series net/mlx5: remove "default n" from Kconfig | expand

Checks

Context Check Description
netdev/tree_selection success Guessing tree name failed - patch did not apply

Commit Message

Cai,Huoqing June 17, 2021, 2:32 a.m. UTC 
From: caihuoqing <caihuoqing@baidu.com>

remove "default n" and "No" is default

Signed-off-by: caihuoqing <caihuoqing@baidu.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/Kconfig | 9 ---------
 1 file changed, 9 deletions(-)

Comments

Saeed Mahameed June 22, 2021, 9:39 p.m. UTC | #1 
On Thu, 2021-06-17 at 10:32 +0800, Cai Huoqing wrote:
> From: caihuoqing <caihuoqing@baidu.com>
> 
> remove "default n" and "No" is default

Applied to net-next-mlx5
Thanks!
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
index d62f90aedade..e1a5a79e27c7 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
@@ -12,7 +12,6 @@  config MLX5_CORE
        depends on MLXFW || !MLXFW
        depends on PTP_1588_CLOCK || !PTP_1588_CLOCK
        depends on PCI_HYPERV_INTERFACE || !PCI_HYPERV_INTERFACE
-       default n
        help
          Core driver for low level functionality of the ConnectX-4 and
          Connect-IB cards by Mellanox Technologies.
@@ -36,7 +35,6 @@  config MLX5_CORE_EN
        depends on NETDEVICES && ETHERNET && INET && PCI && MLX5_CORE
        select PAGE_POOL
        select DIMLIB
-       default n
        help
          Ethernet support in Mellanox Technologies ConnectX-4 NIC.
 
@@ -141,7 +139,6 @@  config MLX5_CORE_EN_DCB
 config MLX5_CORE_IPOIB
        bool "Mellanox 5th generation network adapters (connectX series) IPoIB offloads support"
        depends on MLX5_CORE_EN
-       default n
        help
          MLX5 IPoIB offloads & acceleration support.
 
@@ -149,7 +146,6 @@  config MLX5_FPGA_IPSEC
        bool "Mellanox Technologies IPsec Innova support"
        depends on MLX5_CORE
        depends on MLX5_FPGA
-       default n
        help
        Build IPsec support for the Innova family of network cards by Mellanox
        Technologies. Innova network cards are comprised of a ConnectX chip
@@ -163,7 +159,6 @@  config MLX5_IPSEC
        depends on XFRM_OFFLOAD
        depends on INET_ESP_OFFLOAD || INET6_ESP_OFFLOAD
        select MLX5_ACCEL
-       default n
        help
        Build IPsec support for the Connect-X family of network cards by Mellanox
        Technologies.
@@ -176,7 +171,6 @@  config MLX5_EN_IPSEC
        depends on XFRM_OFFLOAD
        depends on INET_ESP_OFFLOAD || INET6_ESP_OFFLOAD
        depends on MLX5_FPGA_IPSEC || MLX5_IPSEC
-       default n
        help
          Build support for IPsec cryptography-offload acceleration in the NIC.
          Note: Support for hardware with this capability needs to be selected
@@ -189,7 +183,6 @@  config MLX5_FPGA_TLS
        depends on MLX5_CORE_EN
        depends on MLX5_FPGA
        select MLX5_EN_TLS
-       default n
        help
        Build TLS support for the Innova family of network cards by Mellanox
        Technologies. Innova network cards are comprised of a ConnectX chip
@@ -204,7 +197,6 @@  config MLX5_TLS
        depends on MLX5_CORE_EN
        select MLX5_ACCEL
        select MLX5_EN_TLS
-       default n
        help
        Build TLS support for the Connect-X family of network cards by Mellanox
        Technologies.
@@ -227,7 +219,6 @@  config MLX5_SW_STEERING
 config MLX5_SF
        bool "Mellanox Technologies subfunction device support using auxiliary device"
        depends on MLX5_CORE && MLX5_CORE_EN
-       default n
        help
        Build support for subfuction device in the NIC. A Mellanox subfunction
        device can support RDMA, netdevice and vdpa device.