| Message ID | 20210621072424.111733-2-jagan@amarulasolutions.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: imx8mm: Add MIPI DSI support | expand |
On Mon, 21 Jun 2021 12:54:16 +0530, Jagan Teki wrote: > Samsung SEC MIPI DSIM Bridge controller is MIPI DSI bridge > available in NXP's i.MX8M Mini and Nano Processors. > > Add dt-bingings for it. > > Cc: Andrzej Hajda <a.hajda@samsung.com> > Cc: Neil Armstrong <narmstrong@baylibre.com> > Cc: Robert Foss <robert.foss@linaro.org> > Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> > Cc: Rob Herring <robh+dt@kernel.org> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > .../display/bridge/samsung,sec-dsim.yaml | 184 ++++++++++++++++++ > 1 file changed, 184 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/samsung,sec-dsim.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/display/bridge/samsung,sec-dsim.example.dts:20:18: fatal error: dt-bindings/power/imx8mm-power.h: No such file or directory 20 | #include <dt-bindings/power/imx8mm-power.h> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. make[1]: *** [scripts/Makefile.lib:380: Documentation/devicetree/bindings/display/bridge/samsung,sec-dsim.example.dt.yaml] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1416: dt_binding_check] Error 2 \ndoc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1494924 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
Hi Jagan, Thank you for the patch. On Mon, Jun 21, 2021 at 12:54:16PM +0530, Jagan Teki wrote: > Samsung SEC MIPI DSIM Bridge controller is MIPI DSI bridge > available in NXP's i.MX8M Mini and Nano Processors. > > Add dt-bingings for it. > > Cc: Andrzej Hajda <a.hajda@samsung.com> > Cc: Neil Armstrong <narmstrong@baylibre.com> > Cc: Robert Foss <robert.foss@linaro.org> > Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> > Cc: Rob Herring <robh+dt@kernel.org> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > .../display/bridge/samsung,sec-dsim.yaml | 184 ++++++++++++++++++ > 1 file changed, 184 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/samsung,sec-dsim.yaml > > diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,sec-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,sec-dsim.yaml > new file mode 100644 > index 000000000000..32f67f313dfd > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/samsung,sec-dsim.yaml > @@ -0,0 +1,184 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/samsung,sec-dsim.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Samsung SEC MIPI DSIM Bridge controller on i.MX8M Mini and Nano SoCs > + > +maintainers: > + - Jagan Teki <jagan@amarulasolutions.com> > + > +description: | > + NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for > + the SOCs NWL MIPI-DSI host controller. > + > +allOf: > + - $ref: ../dsi-controller.yaml# > + > +properties: > + compatible: > + enum: > + - fsl,imx8mm-sec-dsim > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + assigned-clock-parents: true > + assigned-clock-rates: true > + assigned-clocks: true > + > + clocks: > + items: > + - description: DSI bus clock > + - description: PHY_REF clock > + > + clock-names: > + items: > + - const: bus > + - const: phy_ref > + > + phys: > + maxItems: 1 > + description: phandle to the phy module representing the DPHY > + > + phy-names: > + items: > + - const: dphy > + > + power-domains: > + maxItems: 1 > + description: phandle to the associated power domain > + > + samsung,burst-clock-frequency: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + DSIM high speed burst mode frequency. > + > + samsung,esc-clock-frequency: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + DSIM escape mode frequency. > + > + samsung,pll-clock-frequency: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + DSIM oscillator clock frequency. Why do you need those three properties ? They look like configuration information to me, not system description. If they are needed, their description needs to explain how to set them. Looking at the three descriptions above I have no idea what to select for those frequencies. > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/$defs/port-base > + description: > + Input port node to receive pixel data from the > + display controller. Exactly one endpoint must be > + specified. > + properties: > + endpoint@0: > + $ref: /schemas/graph.yaml#/properties/endpoint > + description: sub-node describing the input from LCDIF > + > + endpoint@1: > + $ref: /schemas/graph.yaml#/properties/endpoint > + description: sub-node describing the input from DCSS > + > + oneOf: > + - required: > + - endpoint@0 > + - required: > + - endpoint@1 > + > + unevaluatedProperties: false > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + DSI output port node to the panel or the next bridge > + in the chain > + > + required: > + - port@0 > + - port@1 > + > +required: > + - '#address-cells' > + - '#size-cells' > + - clock-names > + - clocks > + - compatible > + - interrupts > + - phy-names > + - phys > + - ports > + - reg > + - samsung,burst-clock-frequency > + - samsung,esc-clock-frequency > + - samsung,pll-clock-frequency > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/imx8mm-clock.h> > + #include <dt-bindings/power/imx8mm-power.h> > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + dsi: dsi@32e10000 { > + compatible = "fsl,imx8mm-sec-dsim"; > + reg = <0x32e10000 0xa0>; > + clocks = <&clk IMX8MM_CLK_DSI_CORE>, > + <&clk IMX8MM_CLK_DSI_PHY_REF>; > + clock-names = "bus", "phy_ref"; > + assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>, > + <&clk IMX8MM_VIDEO_PLL1_OUT>, > + <&clk IMX8MM_CLK_DSI_PHY_REF>; > + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>, > + <&clk IMX8MM_VIDEO_PLL1_BYPASS>, > + <&clk IMX8MM_VIDEO_PLL1_OUT>; > + assigned-clock-rates = <266000000>, <594000000>, <27000000>; > + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; > + phys = <&dphy>; > + phy-names = "dphy"; > + power-domains = <&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_MIPI_DSI>; > + samsung,burst-clock-frequency = <891000000>; > + samsung,esc-clock-frequency = <54000000>; > + samsung,pll-clock-frequency = <27000000>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + #size-cells = <0>; > + #address-cells = <1>; > + > + dsi_in_lcdif: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&lcdif_out_dsi>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + dsi_out_panel: endpoint { > + remote-endpoint = <&panel_in_dsi>; > + }; > + }; > + }; > + };
Hi Laurent, On Mon, Jun 21, 2021 at 11:26 PM Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > > Hi Jagan, > > Thank you for the patch. > > On Mon, Jun 21, 2021 at 12:54:16PM +0530, Jagan Teki wrote: > > Samsung SEC MIPI DSIM Bridge controller is MIPI DSI bridge > > available in NXP's i.MX8M Mini and Nano Processors. > > > > Add dt-bingings for it. > > > > Cc: Andrzej Hajda <a.hajda@samsung.com> > > Cc: Neil Armstrong <narmstrong@baylibre.com> > > Cc: Robert Foss <robert.foss@linaro.org> > > Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> > > Cc: Rob Herring <robh+dt@kernel.org> > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > --- > > .../display/bridge/samsung,sec-dsim.yaml | 184 ++++++++++++++++++ > > 1 file changed, 184 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/bridge/samsung,sec-dsim.yaml > > > > diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,sec-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,sec-dsim.yaml > > new file mode 100644 > > index 000000000000..32f67f313dfd > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/bridge/samsung,sec-dsim.yaml > > @@ -0,0 +1,184 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/display/bridge/samsung,sec-dsim.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Samsung SEC MIPI DSIM Bridge controller on i.MX8M Mini and Nano SoCs > > + > > +maintainers: > > + - Jagan Teki <jagan@amarulasolutions.com> > > + > > +description: | > > + NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for > > + the SOCs NWL MIPI-DSI host controller. > > + > > +allOf: > > + - $ref: ../dsi-controller.yaml# > > + > > +properties: > > + compatible: > > + enum: > > + - fsl,imx8mm-sec-dsim > > + > > + reg: > > + maxItems: 1 > > + > > + interrupts: > > + maxItems: 1 > > + > > + '#address-cells': > > + const: 1 > > + > > + '#size-cells': > > + const: 0 > > + > > + assigned-clock-parents: true > > + assigned-clock-rates: true > > + assigned-clocks: true > > + > > + clocks: > > + items: > > + - description: DSI bus clock > > + - description: PHY_REF clock > > + > > + clock-names: > > + items: > > + - const: bus > > + - const: phy_ref > > + > > + phys: > > + maxItems: 1 > > + description: phandle to the phy module representing the DPHY > > + > > + phy-names: > > + items: > > + - const: dphy > > + > > + power-domains: > > + maxItems: 1 > > + description: phandle to the associated power domain > > + > > + samsung,burst-clock-frequency: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: > > + DSIM high speed burst mode frequency. > > + > > + samsung,esc-clock-frequency: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: > > + DSIM escape mode frequency. > > + > > + samsung,pll-clock-frequency: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: > > + DSIM oscillator clock frequency. > > Why do you need those three properties ? They look like configuration > information to me, not system description. If they are needed, their > description needs to explain how to set them. Looking at the three > descriptions above I have no idea what to select for those frequencies. DSIM PLLOutput PMS values are computed based on these clock values as per exynos dsi code is concern. Look like there is other way to compute PMS in SEC DSIM(at least on i.MX8MM) unlike exynos. Let me come back with new changes, thanks! Jagan.
diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,sec-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,sec-dsim.yaml new file mode 100644 index 000000000000..32f67f313dfd --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/samsung,sec-dsim.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/samsung,sec-dsim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SEC MIPI DSIM Bridge controller on i.MX8M Mini and Nano SoCs + +maintainers: + - Jagan Teki <jagan@amarulasolutions.com> + +description: | + NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for + the SOCs NWL MIPI-DSI host controller. + +allOf: + - $ref: ../dsi-controller.yaml# + +properties: + compatible: + enum: + - fsl,imx8mm-sec-dsim + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + assigned-clock-parents: true + assigned-clock-rates: true + assigned-clocks: true + + clocks: + items: + - description: DSI bus clock + - description: PHY_REF clock + + clock-names: + items: + - const: bus + - const: phy_ref + + phys: + maxItems: 1 + description: phandle to the phy module representing the DPHY + + phy-names: + items: + - const: dphy + + power-domains: + maxItems: 1 + description: phandle to the associated power domain + + samsung,burst-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + DSIM high speed burst mode frequency. + + samsung,esc-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + DSIM escape mode frequency. + + samsung,pll-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + DSIM oscillator clock frequency. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + description: + Input port node to receive pixel data from the + display controller. Exactly one endpoint must be + specified. + properties: + endpoint@0: + $ref: /schemas/graph.yaml#/properties/endpoint + description: sub-node describing the input from LCDIF + + endpoint@1: + $ref: /schemas/graph.yaml#/properties/endpoint + description: sub-node describing the input from DCSS + + oneOf: + - required: + - endpoint@0 + - required: + - endpoint@1 + + unevaluatedProperties: false + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + DSI output port node to the panel or the next bridge + in the chain + + required: + - port@0 + - port@1 + +required: + - '#address-cells' + - '#size-cells' + - clock-names + - clocks + - compatible + - interrupts + - phy-names + - phys + - ports + - reg + - samsung,burst-clock-frequency + - samsung,esc-clock-frequency + - samsung,pll-clock-frequency + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mm-clock.h> + #include <dt-bindings/power/imx8mm-power.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + dsi: dsi@32e10000 { + compatible = "fsl,imx8mm-sec-dsim"; + reg = <0x32e10000 0xa0>; + clocks = <&clk IMX8MM_CLK_DSI_CORE>, + <&clk IMX8MM_CLK_DSI_PHY_REF>; + clock-names = "bus", "phy_ref"; + assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>, + <&clk IMX8MM_VIDEO_PLL1_OUT>, + <&clk IMX8MM_CLK_DSI_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>, + <&clk IMX8MM_VIDEO_PLL1_BYPASS>, + <&clk IMX8MM_VIDEO_PLL1_OUT>; + assigned-clock-rates = <266000000>, <594000000>, <27000000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + phys = <&dphy>; + phy-names = "dphy"; + power-domains = <&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_MIPI_DSI>; + samsung,burst-clock-frequency = <891000000>; + samsung,esc-clock-frequency = <54000000>; + samsung,pll-clock-frequency = <27000000>; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #size-cells = <0>; + #address-cells = <1>; + + dsi_in_lcdif: endpoint@0 { + reg = <0>; + remote-endpoint = <&lcdif_out_dsi>; + }; + }; + + port@1 { + reg = <1>; + + dsi_out_panel: endpoint { + remote-endpoint = <&panel_in_dsi>; + }; + }; + }; + };
Samsung SEC MIPI DSIM Bridge controller is MIPI DSI bridge available in NXP's i.MX8M Mini and Nano Processors. Add dt-bingings for it. Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- .../display/bridge/samsung,sec-dsim.yaml | 184 ++++++++++++++++++ 1 file changed, 184 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/samsung,sec-dsim.yaml