diff mbox series

[RFC,2/9] drm: bridge: Add Samsung SEC MIPI DSIM bridge driver

Message ID 20210621072424.111733-3-jagan@amarulasolutions.com (mailing list archive)
State New, archived
Headers show
Series arm64: imx8mm: Add MIPI DSI support | expand

Commit Message

Jagan Teki June 21, 2021, 7:24 a.m. UTC
Samsung SEC MIPI DSIM Bridge controller is MIPI DSI bridge
available in NXP's i.MX8M Mini and Nano Processors.

Add bridge driver for it.

Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 drivers/gpu/drm/bridge/Kconfig    |   15 +
 drivers/gpu/drm/bridge/Makefile   |    1 +
 drivers/gpu/drm/bridge/sec-dsim.c | 1535 +++++++++++++++++++++++++++++
 3 files changed, 1551 insertions(+)
 create mode 100644 drivers/gpu/drm/bridge/sec-dsim.c

Comments

Laurent Pinchart June 23, 2021, 10:22 p.m. UTC | #1
Hi Jagan,

Thank you for the patch.

On Mon, Jun 21, 2021 at 12:54:17PM +0530, Jagan Teki wrote:
> Samsung SEC MIPI DSIM Bridge controller is MIPI DSI bridge
> available in NXP's i.MX8M Mini and Nano Processors.
> 
> Add bridge driver for it.
> 
> Cc: Andrzej Hajda <a.hajda@samsung.com>
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Cc: Robert Foss <robert.foss@linaro.org>
> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
>  drivers/gpu/drm/bridge/Kconfig    |   15 +
>  drivers/gpu/drm/bridge/Makefile   |    1 +
>  drivers/gpu/drm/bridge/sec-dsim.c | 1535 +++++++++++++++++++++++++++++
>  3 files changed, 1551 insertions(+)
>  create mode 100644 drivers/gpu/drm/bridge/sec-dsim.c
> 
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index 19109c0b5481..a183eb165a35 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -189,6 +189,21 @@ config DRM_PARADE_PS8640
>  	  The PS8640 is a high-performance and low-power
>  	  MIPI DSI to eDP converter
>  
> +config DRM_SEC_MIPI_DSIM
> +	tristate "Samsung SEC MIPI DSIM Bridge controller"
> +	depends on DRM
> +	depends on COMMON_CLK
> +	depends on OF && HAS_IOMEM
> +	select DRM_KMS_HELPER
> +	select DRM_MIPI_DSI
> +	select DRM_PANEL_BRIDGE
> +	select GENERIC_PHY_MIPI_DPHY
> +	select MFD_SYSCON
> +	select REGMAP_MMIO
> +	help
> +	  This enables the Samsung SEC MIPI DSIM Bridge controller as
> +	  for example found on NXP's i.MX8M Mini and Nano Processors.
> +
>  config DRM_SIL_SII8620
>  	tristate "Silicon Image SII8620 HDMI/MHL bridge"
>  	depends on OF
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index 88e4edf81087..ff802a4ffe65 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -12,6 +12,7 @@ obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v
>  obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
>  obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
>  obj-$(CONFIG_DRM_PARADE_PS8640) += parade-ps8640.o
> +obj-$(CONFIG_DRM_SEC_MIPI_DSIM) += sec-dsim.o
>  obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o
>  obj-$(CONFIG_DRM_SII902X) += sii902x.o
>  obj-$(CONFIG_DRM_SII9234) += sii9234.o
> diff --git a/drivers/gpu/drm/bridge/sec-dsim.c b/drivers/gpu/drm/bridge/sec-dsim.c
> new file mode 100644
> index 000000000000..5b6645bb94e7
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/sec-dsim.c
> @@ -0,0 +1,1535 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Samsung SEC MIPI DSIM Bridge
> + *
> + * Copyright (C) 2018 NXP
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd
> + * Copyright (C) 2021 Amarula Solutions(India)
> + *
> + * Based on the drivers/gpu/drm/exynos/exynos_drm_dsi.c
> + *
> + * Authors:
> + * Tomasz Figa <t.figa@samsung.com>
> + * Andrzej Hajda <a.hajda@samsung.com>
> + * Fancy Fang <chen.fang@nxp.com>
> + * Jagan Teki <jagan@amarulasolutions.com>
> + */
> +
> +#include <asm/unaligned.h>
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/completion.h>
> +#include <linux/delay.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_graph.h>
> +#include <linux/phy/phy.h>
> +#include <linux/regmap.h>
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_bridge.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_of.h>
> +#include <drm/drm_print.h>
> +
> +#include <video/mipi_display.h>
> +
> +#define DRIVER_NAME			"sec-dsim"
> +
> +/* dsim registers */
> +#define DSIM_VERSION			0x00
> +#define DSIM_STATUS			0x04
> +#define DSIM_RGB_STATUS			0x08
> +#define DSIM_SWRST			0x0c
> +#define DSIM_CLKCTRL			0x10
> +#define DSIM_TIMEOUT			0x14
> +#define DSIM_CONFIG			0x18
> +#define DSIM_ESCMODE			0x1c
> +#define DSIM_MDRESOL			0x20
> +#define DSIM_MVPORCH			0x24
> +#define DSIM_MHPORCH			0x28
> +#define DSIM_MSYNC			0x2c
> +#define DSIM_SDRESOL			0x30
> +#define DSIM_INTSRC			0x34
> +#define DSIM_INTMSK			0x38
> +#define DSIM_PKTHDR			0x3c
> +#define DSIM_PAYLOAD			0x40
> +#define DSIM_RXFIFO			0x44
> +#define DSIM_FIFOTHLD			0x48
> +#define DSIM_FIFOCTRL			0x4c
> +#define DSIM_MEMACCHR			0x50
> +#define DSIM_MULTI_PKT			0x78
> +#define DSIM_PLLCTRL_1G			0x90
> +#define DSIM_PLLCTRL			0x94
> +#define DSIM_PLLCTRL1			0x98
> +#define DSIM_PLLCTRL2			0x9c
> +#define DSIM_PLLTMR			0xa0

Looking at the register set, it seems to match the Exynos 5433,
supported by drivers/gpu/drm/exynos/exynos_drm_dsi.c. Can we leverage
that driver instead of adding a new one for the same IP core ?

> +
> +/* register bit fields */
> +#define STATUS_PLLSTABLE		BIT(31)
> +#define STATUS_SWRSTRLS			BIT(20)
> +#define STATUS_TXREADYHSCLK		BIT(10)
> +#define STATUS_ULPSCLK			BIT(9)
> +#define STATUS_STOPSTATECLK		BIT(8)
> +
> +#define CLKCTRL_TXREQUESTHSCLK		BIT(31)
> +#define CLKCTRL_ESCCLKEN		BIT(28)
> +#define CLKCTRL_PLLBYPASS		BIT(27)
> +#define CLKCTRL_BYTECLKSRC_MASK		GENMASK(26, 25)
> +#define CLKCTRL_BYTECLKSRC(x)		FIELD_PREP(CLKCTRL_BYTECLKSRC_MASK, (x))
> +#define CLKCTRL_BYTECLKEN		BIT(24)
> +#define CLKCTRL_LANEESCDATAEN_MASK	GENMASK(23, 20)
> +#define CLKCTRL_LANEESCDATAEN(x)	FIELD_PREP(CLKCTRL_LANEESCDATAEN_MASK, (x))
> +#define CLKCTRL_LANEESCCLKEN		BIT(19)
> +#define CLKCTRL_ESCPRESCALER_MASK	GENMASK(15, 0)
> +#define CLKCTRL_ESCPRESCALER(x)		FIELD_PREP(CLKCTRL_ESCPRESCALER_MASK, (x))
> +
> +#define TIMEOUT_BTAOUT_MASK		GENMASK(23, 16)
> +#define TIMEOUT_BTAOUT(x)		FIELD_PREP(TIMEOUT_BTAOUT_MASK, (x))
> +#define TIMEOUT_LPDRTOUT_MASK		GENMASK(15, 0)
> +#define TIMEOUT_LPDRTOUT(x)		FIELD_PREP(TIMEOUT_LPDRTOUT_MASK, (x))
> +
> +#define CONFIG_NON_CONTINUOUS_CLOCK_LANE	BIT(31)
> +#define CONFIG_CLKLANE_STOP_START	BIT(30)
> +#define CONFIG_MFLUSH_VS		BIT(29)
> +#define CONFIG_EOT_R03			BIT(28)
> +#define CONFIG_SYNCINFORM		BIT(27)
> +#define CONFIG_BURSTMODE		BIT(26)
> +#define CONFIG_VIDEOMODE		BIT(25)
> +#define CONFIG_AUTOMODE			BIT(24)
> +#define CONFIG_HSEDISABLEMODE		BIT(23)
> +#define CONFIG_HFPDISABLEMODE		BIT(22)
> +#define CONFIG_HBPDISABLEMODE		BIT(21)
> +#define CONFIG_HSADISABLEMODE		BIT(20)
> +
> +#define CONFIG_MAINPIXFORMAT_MASK	GENMASK(14, 12)
> +#define CONFIG_MAINPIXFORMAT(x)		FIELD_PREP(CONFIG_MAINPIXFORMAT_MASK, (x))
> +#define CONFIG_NUMOFDATLANE_MASK	GENMASK(6, 5)
> +#define CONFIG_NUMOFDATLANE(x)		FIELD_PREP(CONFIG_NUMOFDATLANE_MASK, (x))
> +#define CONFIG_LANEEN_MASK		GENMASK(4, 0)
> +#define CONFIG_LANEEN(x)		FIELD_PREP(GENMASK(4, 1), (x))
> +#define CONFIG_CLKLANEEN		BIT(0)
> +
> +#define ESCMODE_STOPSTATE_CN_MASK	GENMASK(31, 21)
> +#define ESCMODE_STOPSTATE_CN(x)		FIELD_PREP(ESCMODE_STOPSTATE_CN_MASK, (x))
> +#define ESCMODE_CMDLPDT			BIT(7)
> +
> +#define MDRESOL_MAINSTANDBY		BIT(31)
> +#define MVPORCH_MAINVRESOL_MASK		GENMASK(27, 16)
> +#define MVPORCH_MAINVRESOL(x)		FIELD_PREP(MVPORCH_MAINVRESOL_MASK, (x))
> +#define MVPORCH_MAINHRESOL_MASK		GENMASK(11, 0)
> +#define MVPORCH_MAINHRESOL(x)		FIELD_PREP(MVPORCH_MAINHRESOL_MASK, (x))
> +#define MVPORCH_CMDALLOW_MASK		GENMASK(31, 28)
> +#define MVPORCH_CMDALLOW(x)		FIELD_PREP(MVPORCH_CMDALLOW_MASK, (x))
> +#define MVPORCH_STABLEVFP_MASK		GENMASK(26, 16)
> +#define MVPORCH_STABLEVFP(x)		FIELD_PREP(MVPORCH_STABLEVFP_MASK, (x))
> +#define MVPORCH_MAINVBP_MASK		GENMASK(10, 0)
> +#define MVPORCH_MAINVBP(x)		FIELD_PREP(MVPORCH_MAINVBP_MASK, (x))
> +#define MVPORCH_MAINHFP_MASK		GENMASK(31, 16)
> +#define MVPORCH_MAINHFP(x)		FIELD_PREP(MVPORCH_MAINHFP_MASK, (x))
> +#define MVPORCH_MAINHBP_MASK		GENMASK(15, 0)
> +#define MVPORCH_MAINHBP(x)		FIELD_PREP(MVPORCH_MAINHBP_MASK, (x))
> +#define MVPORCH_MAINVSA_MASK		GENMASK(31, 22)
> +#define MVPORCH_MAINVSA(x)		FIELD_PREP(MVPORCH_MAINVSA_MASK, (x))
> +#define MVPORCH_MAINHSA_MASK		GENMASK(15, 0)
> +#define MVPORCH_MAINHSA(x)		FIELD_PREP(MVPORCH_MAINHSA_MASK, (x))
> +
> +#define INTSRC_PLLSTABLE		BIT(31)
> +#define INTSRC_SWRSTRELEASE		BIT(30)
> +#define INTSRC_SFRPLFIFOEMPTY		BIT(29)
> +#define INTSRC_SFRPHFIFOEMPTY		BIT(28)
> +#define INTSRC_FRAMEDONE		BIT(24)
> +#define INTSRC_LPDRTOUT			BIT(21)
> +#define INTSRC_TATOUT			BIT(20)
> +#define INTSRC_RXDATDONE		BIT(18)
> +#define INTSRC_RXTE			BIT(17)
> +#define INTSRC_RXACK			BIT(16)
> +#define INTSRC_MASK			(INTSRC_PLLSTABLE	|	\
> +					 INTSRC_SWRSTRELEASE	|	\
> +					 INTSRC_SFRPLFIFOEMPTY	|	\
> +					 INTSRC_SFRPHFIFOEMPTY	|	\
> +					 INTSRC_FRAMEDONE	|	\
> +					 INTSRC_LPDRTOUT	|	\
> +					 INTSRC_TATOUT		|	\
> +					 INTSRC_RXDATDONE	|	\
> +					 INTSRC_RXTE		|	\
> +					 INTSRC_RXACK)
> +
> +#define INTMSK_MSKPLLSTABLE		BIT(31)
> +#define INTMSK_MSKSWRELEASE		BIT(30)
> +#define INTMSK_MSKSFRPLFIFOEMPTY	BIT(29)
> +#define INTMSK_MSKSFRPHFIFOEMPTY	BIT(28)
> +#define INTMSK_MSKFRAMEDONE		BIT(24)
> +#define INTMSK_MSKLPDRTOUT		BIT(21)
> +#define INTMSK_MSKTATOUT		BIT(20)
> +#define INTMSK_MSKRXDATDONE		BIT(18)
> +#define INTMSK_MSKRXTE			BIT(17)
> +#define INTMSK_MSKRXACK			BIT(16)
> +
> +#define PKTHDR_DATA1_MASK		GENMASK(23, 16)
> +#define PKTHDR_DATA1(x)			FIELD_PREP(PKTHDR_DATA1_MASK, (x))
> +#define PKTHDR_DATA1_GET(x)		FIELD_GET(PKTHDR_DATA1_MASK, (x))
> +#define PKTHDR_WC_MASK			GENMASK(23, 8)
> +#define PKTHDR_WC_GET(x)		FIELD_GET(PKTHDR_WC_MASK, (x))
> +#define PKTHDR_DATA0_MASK		GENMASK(15, 8)
> +#define PKTHDR_DATA0(x)			FIELD_PREP(PKTHDR_DATA0_MASK, (x))
> +#define PKTHDR_DATA0_GET(x)		FIELD_GET(PKTHDR_DATA0_MASK, (x))
> +#define PKTHDR_DI_MASK			GENMASK(7, 0)
> +#define PKTHDR_DI(x)			FIELD_PREP(PKTHDR_DI_MASK, (x))
> +#define PKTHDR_DT_MASK			GENMASK(5, 0)
> +#define PKTHDR_DT_GET(x)		FIELD_GET(PKTHDR_DT_MASK, (x))
> +
> +#define FIFOCTRL_FULLRX			BIT(25)
> +#define FIFOCTRL_EMPTYRX		BIT(24)
> +#define FIFOCTRL_FULLHSFR		BIT(23)
> +#define FIFOCTRL_EMPTYHSFR		BIT(22)
> +#define FIFOCTRL_FULLLSFR		BIT(21)
> +#define FIFOCTRL_EMPTYLSFR		BIT(20)
> +#define FIFOCTRL_FULLHMAIN		BIT(11)
> +#define FIFOCTRL_EMPTYHMAIN		BIT(10)
> +#define FIFOCTRL_FULLLMAIN		BIT(9)
> +#define FIFOCTRL_EMPTYLMAIN		BIT(8)
> +#define FIFOCTRL_NINITRX		BIT(4)
> +#define FIFOCTRL_NINITSFR		BIT(3)
> +#define FIFOCTRL_NINITI80		BIT(2)
> +#define FIFOCTRL_NINITSUB		BIT(1)
> +#define FIFOCTRL_NINITMAIN		BIT(0)
> +#define FIFOCTRL_INIT_MASK		GENMASK(4, 0)
> +
> +#define PLLCTRL_PLLEN			BIT(23)
> +#define PLLCTRL_PMS_P_MASK		GENMASK(18, 14)
> +#define PLLCTRL_PMS_P(x)		FIELD_PREP(PLLCTRL_PMS_P_MASK, (x))
> +#define PLLCTRL_PMS_M_MASK		GENMASK(12, 4)
> +#define PLLCTRL_PMS_M(x)		FIELD_PREP(PLLCTRL_PMS_M_MASK, (x))
> +#define PLLCTRL_PMS_S_MASK		GENMASK(2, 1)
> +#define PLLCTRL_PMS_S(x)		FIELD_PREP(PLLCTRL_PMS_S_MASK, (x))
> +
> +/* dsim all irqs index */
> +#define PLLSTABLE			1
> +#define SWRSTRELEASE			2
> +#define SFRPLFIFOEMPTY			3
> +#define SFRPHFIFOEMPTY			4
> +#define SYNCOVERRIDE			5
> +#define BUSTURNOVER			6
> +#define FRAMEDONE			7
> +#define LPDRTOUT			8
> +#define TATOUT				9
> +#define RXDATDONE			10
> +#define RXTE				11
> +#define RXACK				12
> +#define ERRRXECC			13
> +#define ERRRXCRC			14
> +#define ERRESC3				15
> +#define ERRESC2				16
> +#define ERRESC1				17
> +#define ERRESC0				18
> +#define ERRSYNC3			19
> +#define ERRSYNC2			20
> +#define ERRSYNC1			21
> +#define ERRSYNC0			22
> +#define ERRCONTROL3			23
> +#define ERRCONTROL2			24
> +#define ERRCONTROL1			25
> +#define ERRCONTROL0			26
> +
> +#define MIPI_FIFO_TIMEOUT		msecs_to_jiffies(250)
> +
> +#define DSIM_HFP_PKT_OVERHEAD		6
> +#define DSIM_HBP_PKT_OVERHEAD		6
> +#define DSIM_HSA_PKT_OVERHEAD		6
> +
> +struct sec_dsim_plat_data {
> +	unsigned int version;
> +	unsigned int pll_timer;
> +	unsigned int max_freq_hz;
> +	unsigned int esc_stop_state_cnt;
> +};
> +
> +struct sec_dsim {
> +	struct mipi_dsi_host host;
> +	struct drm_bridge bridge;
> +	struct drm_bridge *panel_bridge;
> +	struct device *dev;
> +
> +	struct clk *clk_phy_ref;
> +	struct clk *clk_bus;
> +	struct phy *phy;
> +
> +	struct regmap *regmap;
> +	struct drm_display_mode mode;
> +	int irq;
> +	unsigned int pll_clk_hz;
> +	unsigned int burst_clk_hz;
> +	unsigned int esc_clk_hz;
> +	unsigned int lanes;
> +	unsigned int channel;
> +	enum mipi_dsi_pixel_format format;
> +	unsigned long mode_flags;
> +
> +	struct completion pll_stable;
> +	struct completion ph_tx_done;
> +	struct completion pl_tx_done;
> +	struct completion rx_done;
> +	const struct sec_dsim_plat_data *pdata;
> +};
> +
> +static const struct regmap_config sec_dsim_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 32,
> +	.reg_stride = 4,
> +	.max_register = DSIM_PLLTMR,
> +	.name = DRIVER_NAME,
> +};
> +
> +static inline struct sec_dsim *host_to_dsim(struct mipi_dsi_host *host)
> +{
> +	return container_of(host, struct sec_dsim, host);
> +}
> +
> +static inline struct sec_dsim *bridge_to_dsim(struct drm_bridge *bridge)
> +{
> +	return container_of(bridge, struct sec_dsim, bridge);
> +}
> +
> +/* used for CEA standard modes */
> +struct dsim_hblank_par {
> +	char *name;		/* drm display mode name */
> +	int vrefresh;
> +	int hfp_wc;
> +	int hbp_wc;
> +	int hsa_wc;
> +	int lanes;
> +};
> +
> +#define DSIM_HBLANK_PARAM(nm, vf, hfp, hbp, hsa, num)	\
> +	.name	  = (nm),				\
> +	.vrefresh = (vf),				\
> +	.hfp_wc   = (hfp),				\
> +	.hbp_wc   = (hbp),				\
> +	.hsa_wc   = (hsa),				\
> +	.lanes	  = (num)
> +
> +static const struct dsim_hblank_par hblank_4lanes[] = {
> +	/* {  88, 148, 44 } */
> +	{ DSIM_HBLANK_PARAM("1920x1080", 60,  60, 105,  27, 4), },
> +	/* { 528, 148, 44 } */
> +	{ DSIM_HBLANK_PARAM("1920x1080", 50, 390, 105,  27, 4), },
> +	/* {  88, 148, 44 } */
> +	{ DSIM_HBLANK_PARAM("1920x1080", 30,  60, 105,  27, 4), },
> +	/* { 110, 220, 40 } */
> +	{ DSIM_HBLANK_PARAM("1280x720",  60,  78, 159,  24, 4), },
> +	/* { 440, 220, 40 } */
> +	{ DSIM_HBLANK_PARAM("1280x720",  50, 324, 159,  24, 4), },
> +	/* {  16,  60, 62 } */
> +	{ DSIM_HBLANK_PARAM("720x480",   60,   6,  39,  40, 4), },
> +	/* {  12,  68, 64 } */
> +	{ DSIM_HBLANK_PARAM("720x576",   50,   3,  45,  42, 4), },
> +	/* {  16,  48, 96 } */
> +	{ DSIM_HBLANK_PARAM("640x480",   60,   6,  30,  66, 4), },
> +};
> +
> +static const struct dsim_hblank_par hblank_2lanes[] = {
> +	/* {  88, 148, 44 } */
> +	{ DSIM_HBLANK_PARAM("1920x1080", 30, 114, 210,  60, 2), },
> +	/* { 110, 220, 40 } */
> +	{ DSIM_HBLANK_PARAM("1280x720",  60, 159, 320,  40, 2), },
> +	/* { 440, 220, 40 } */
> +	{ DSIM_HBLANK_PARAM("1280x720",  50, 654, 320,  40, 2), },
> +	/* {  16,  60, 62 } */
> +	{ DSIM_HBLANK_PARAM("720x480",   60,  16,  66,  88, 2), },
> +	/* {  12,  68, 64 } */
> +	{ DSIM_HBLANK_PARAM("720x576",   50,  12,  96,  72, 2), },
> +	/* {  16,  48, 96 } */
> +	{ DSIM_HBLANK_PARAM("640x480",   60,  18,  66, 138, 2), },
> +};
> +
> +static
> +const struct dsim_hblank_par *sec_dsim_get_hblank_par(struct sec_dsim *dsim)
> +{
> +	struct drm_display_mode *mode = &dsim->mode;
> +	const struct dsim_hblank_par *hpar, *hblank;
> +	int i, size;
> +
> +	if (unlikely(!mode->name))
> +		return NULL;
> +
> +	switch (dsim->lanes) {
> +	case 2:
> +		hblank = hblank_2lanes;
> +		size   = ARRAY_SIZE(hblank_2lanes);
> +		break;
> +	case 4:
> +		hblank = hblank_4lanes;
> +		size   = ARRAY_SIZE(hblank_4lanes);
> +		break;
> +	default:
> +		DRM_DEV_ERROR(dsim->dev,
> +			      "No hblank data for mode %s with %d lanes\n",
> +			      mode->name, dsim->lanes);
> +		return NULL;
> +	}
> +
> +	for (i = 0; i < size; i++) {
> +		hpar = &hblank[i];
> +
> +		if (!strcmp(mode->name, hpar->name)) {
> +			if (drm_mode_vrefresh(mode) != hpar->vrefresh)
> +				continue;
> +
> +			/* found */
> +			return hpar;
> +		}
> +	}
> +
> +	return NULL;
> +}
> +
> +static void dsim_write(struct sec_dsim *dsim, unsigned int reg, u32 val)
> +{
> +	int ret;
> +
> +	ret = regmap_write(dsim->regmap, reg, val);
> +	if (ret < 0)
> +		DRM_DEV_ERROR(dsim->dev,
> +			      "failed to write sec dsim reg 0x%x: %d\n",
> +			      reg, ret);
> +}
> +
> +static u32 dsim_read(struct sec_dsim *dsim, u32 reg)
> +{
> +	unsigned int val;
> +	int ret;
> +
> +	ret = regmap_read(dsim->regmap, reg, &val);
> +	if (ret < 0)
> +		DRM_DEV_ERROR(dsim->dev,
> +			      "failed to read sec dsim reg 0x%x: %d\n",
> +			      reg, ret);
> +
> +	return val;
> +}
> +
> +static void __maybe_unused sec_dsim_irq_mask(struct sec_dsim *dsim,
> +						  int irq_idx)
> +{
> +	uint32_t intmsk;
> +
> +	intmsk = dsim_read(dsim, DSIM_INTMSK);
> +
> +	switch (irq_idx) {
> +	case PLLSTABLE:
> +		intmsk |= INTMSK_MSKPLLSTABLE;
> +		break;
> +	case SWRSTRELEASE:
> +		intmsk |= INTMSK_MSKSWRELEASE;
> +		break;
> +	case SFRPLFIFOEMPTY:
> +		intmsk |= INTMSK_MSKSFRPLFIFOEMPTY;
> +		break;
> +	case SFRPHFIFOEMPTY:
> +		intmsk |= INTMSK_MSKSFRPHFIFOEMPTY;
> +		break;
> +	case FRAMEDONE:
> +		intmsk |= INTMSK_MSKFRAMEDONE;
> +		break;
> +	case LPDRTOUT:
> +		intmsk |= INTMSK_MSKLPDRTOUT;
> +		break;
> +	case TATOUT:
> +		intmsk |= INTMSK_MSKTATOUT;
> +		break;
> +	case RXDATDONE:
> +		intmsk |= INTMSK_MSKRXDATDONE;
> +		break;
> +	case RXTE:
> +		intmsk |= INTMSK_MSKRXTE;
> +		break;
> +	case RXACK:
> +		intmsk |= INTMSK_MSKRXACK;
> +		break;
> +	default:
> +		/* unsupported irq */
> +		return;
> +	}
> +
> +	dsim_write(dsim, DSIM_INTMSK, intmsk);
> +}
> +
> +static void sec_dsim_irq_unmask(struct sec_dsim *dsim,
> +				     int irq_idx)
> +{
> +	uint32_t intmsk;
> +
> +	intmsk = dsim_read(dsim, DSIM_INTMSK);
> +
> +	switch (irq_idx) {
> +	case PLLSTABLE:
> +		intmsk &= ~INTMSK_MSKPLLSTABLE;
> +		break;
> +	case SWRSTRELEASE:
> +		intmsk &= ~INTMSK_MSKSWRELEASE;
> +		break;
> +	case SFRPLFIFOEMPTY:
> +		intmsk &= ~INTMSK_MSKSFRPLFIFOEMPTY;
> +		break;
> +	case SFRPHFIFOEMPTY:
> +		intmsk &= ~INTMSK_MSKSFRPHFIFOEMPTY;
> +		break;
> +	case FRAMEDONE:
> +		intmsk &= ~INTMSK_MSKFRAMEDONE;
> +		break;
> +	case LPDRTOUT:
> +		intmsk &= ~INTMSK_MSKLPDRTOUT;
> +		break;
> +	case TATOUT:
> +		intmsk &= ~INTMSK_MSKTATOUT;
> +		break;
> +	case RXDATDONE:
> +		intmsk &= ~INTMSK_MSKRXDATDONE;
> +		break;
> +	case RXTE:
> +		intmsk &= ~INTMSK_MSKRXTE;
> +		break;
> +	case RXACK:
> +		intmsk &= ~INTMSK_MSKRXACK;
> +		break;
> +	default:
> +		/* unsupported irq */
> +		return;
> +	}
> +
> +	dsim_write(dsim, DSIM_INTMSK, intmsk);
> +}
> +
> +/* write 1 clear irq */
> +static void sec_dsim_irq_clear(struct sec_dsim *dsim,
> +				    int irq_idx)
> +{
> +	uint32_t intsrc = 0;
> +
> +	switch (irq_idx) {
> +	case PLLSTABLE:
> +		intsrc |= INTSRC_PLLSTABLE;
> +		break;
> +	case SWRSTRELEASE:
> +		intsrc |= INTSRC_SWRSTRELEASE;
> +		break;
> +	case SFRPLFIFOEMPTY:
> +		intsrc |= INTSRC_SFRPLFIFOEMPTY;
> +		break;
> +	case SFRPHFIFOEMPTY:
> +		intsrc |= INTSRC_SFRPHFIFOEMPTY;
> +		break;
> +	case FRAMEDONE:
> +		intsrc |= INTSRC_FRAMEDONE;
> +		break;
> +	case LPDRTOUT:
> +		intsrc |= INTSRC_LPDRTOUT;
> +		break;
> +	case TATOUT:
> +		intsrc |= INTSRC_TATOUT;
> +		break;
> +	case RXDATDONE:
> +		intsrc |= INTSRC_RXDATDONE;
> +		break;
> +	case RXTE:
> +		intsrc |= INTSRC_RXTE;
> +		break;
> +	case RXACK:
> +		intsrc |= INTSRC_RXACK;
> +		break;
> +	default:
> +		/* unsupported irq */
> +		return;
> +	}
> +
> +	dsim_write(dsim, DSIM_INTSRC, intsrc);
> +}
> +
> +static void sec_dsim_irq_init(struct sec_dsim *dsim)
> +{
> +	sec_dsim_irq_unmask(dsim, PLLSTABLE);
> +	sec_dsim_irq_unmask(dsim, SWRSTRELEASE);
> +}
> +
> +static irqreturn_t sec_dsim_irq_handler(int irq, void *data)
> +{
> +	uint32_t intsrc, status;
> +	struct sec_dsim *dsim = data;
> +
> +	intsrc = dsim_read(dsim, DSIM_INTSRC);
> +	status = dsim_read(dsim, DSIM_STATUS);
> +
> +	if (WARN_ON(!intsrc)) {
> +		DRM_DEV_ERROR(dsim->dev, "interrupt is not from dsim\n");
> +		return IRQ_NONE;
> +	}
> +
> +	if (WARN_ON(!(intsrc & INTSRC_MASK))) {
> +		dev_warn(dsim->dev, "unenable irq happens: %#x\n", intsrc);
> +		/* just clear irqs */
> +		dsim_write(dsim, DSIM_INTSRC, intsrc);
> +		return IRQ_NONE;
> +	}
> +
> +	if (intsrc & INTSRC_PLLSTABLE) {
> +		WARN_ON(!(status & STATUS_PLLSTABLE));
> +		sec_dsim_irq_clear(dsim, PLLSTABLE);
> +		complete(&dsim->pll_stable);
> +	}
> +
> +	if (intsrc & INTSRC_SWRSTRELEASE)
> +		sec_dsim_irq_clear(dsim, SWRSTRELEASE);
> +
> +	if (intsrc & INTSRC_SFRPLFIFOEMPTY) {
> +		sec_dsim_irq_clear(dsim, SFRPLFIFOEMPTY);
> +		complete(&dsim->pl_tx_done);
> +	}
> +
> +	if (intsrc & INTSRC_SFRPHFIFOEMPTY) {
> +		sec_dsim_irq_clear(dsim, SFRPHFIFOEMPTY);
> +		complete(&dsim->ph_tx_done);
> +	}
> +
> +	if (WARN_ON(intsrc & INTSRC_LPDRTOUT)) {
> +		sec_dsim_irq_clear(dsim, LPDRTOUT);
> +		dev_warn(dsim->dev, "LP RX timeout\n");
> +	}
> +
> +	if (WARN_ON(intsrc & INTSRC_TATOUT)) {
> +		sec_dsim_irq_clear(dsim, TATOUT);
> +		dev_warn(dsim->dev, "Turns around Acknowledge timeout\n");
> +	}
> +
> +	if (intsrc & INTSRC_RXDATDONE) {
> +		sec_dsim_irq_clear(dsim, RXDATDONE);
> +		complete(&dsim->rx_done);
> +	}
> +
> +	if (intsrc & INTSRC_RXTE) {
> +		sec_dsim_irq_clear(dsim, RXTE);
> +		DRM_DEV_DEBUG(dsim->dev, "TE Rx trigger received\n");
> +	}
> +
> +	if (intsrc & INTSRC_RXACK) {
> +		sec_dsim_irq_clear(dsim, RXACK);
> +		DRM_DEV_DEBUG(dsim->dev, "ACK Rx trigger received\n");
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static void sec_dsim_config_cmd_lpm(struct sec_dsim *dsim, bool enable)
> +{
> +	u32 reg;
> +
> +	reg = dsim_read(dsim, DSIM_ESCMODE);
> +
> +	if (enable)
> +		reg |= ESCMODE_CMDLPDT;
> +	else
> +		reg &= ~ESCMODE_CMDLPDT;
> +
> +	dsim_write(dsim, DSIM_ESCMODE, reg);
> +}
> +
> +static void sec_dsim_write_pl_to_sfr_fifo(struct sec_dsim *dsim,
> +					  const void *payload,
> +					  size_t length)
> +{
> +	uint32_t pl_data;
> +
> +	if (!length)
> +		return;
> +
> +	while (length >= 4) {
> +		pl_data = get_unaligned_le32(payload);
> +		dsim_write(dsim, DSIM_PAYLOAD, pl_data);
> +		payload += 4;
> +		length -= 4;
> +	}
> +
> +	pl_data = 0;
> +	switch (length) {
> +	case 3:
> +		pl_data |= ((u8 *)payload)[2] << 16;
> +		/* fallthrough */
> +	case 2:
> +		pl_data |= ((u8 *)payload)[1] << 8;
> +		/* fallthrough */
> +	case 1:
> +		pl_data |= ((u8 *)payload)[0];
> +		dsim_write(dsim, DSIM_PAYLOAD, pl_data);
> +		break;
> +	}
> +}
> +
> +static void sec_dsim_write_ph_to_sfr_fifo(struct sec_dsim *dsim,
> +					       void *header,
> +					       bool use_lpm)
> +{
> +	u32 reg;
> +
> +	reg = dsim_read(dsim, DSIM_PKTHDR);
> +
> +	reg &= ~PKTHDR_DATA1_MASK;
> +	reg |= PKTHDR_DATA1(((u8 *)header)[2]);	/* WC MSB */
> +	reg &= ~PKTHDR_DATA0_MASK;
> +	reg |= PKTHDR_DATA0(((u8 *)header)[1]);	/* WC LSB  */
> +	reg &= ~PKTHDR_DI_MASK;
> +	reg |= PKTHDR_DI(((u8 *)header)[0]);	/* Data ID */
> +	dsim_write(dsim, DSIM_PKTHDR, reg);
> +}
> +
> +static int sec_dsim_read_pl_from_sfr_fifo(struct sec_dsim *dsim,
> +					       void *payload,
> +					       size_t length)
> +{
> +	uint8_t data_type;
> +	uint16_t word_count = 0;
> +	uint32_t reg, ph, pl;
> +
> +	reg = dsim_read(dsim, DSIM_FIFOCTRL);
> +
> +	if (WARN_ON(reg & FIFOCTRL_EMPTYRX))
> +		return -EINVAL;
> +
> +	ph = dsim_read(dsim, DSIM_RXFIFO);
> +	data_type = PKTHDR_DT_GET(ph);
> +	switch (data_type) {
> +	case MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT:
> +		DRM_DEV_ERROR(dsim->dev,
> +			      "peripheral report error: (0-7)%lx, (8-15)%lx\n",
> +			      PKTHDR_DATA0_GET(ph), PKTHDR_DATA1_GET(ph));
> +		return -EPROTO;
> +	case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE:
> +	case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE:
> +		if (!WARN_ON(length < 2)) {
> +			((u8 *)payload)[1] = PKTHDR_DATA1_GET(ph);
> +			word_count++;
> +		}
> +		/* fall through */
> +	case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE:
> +	case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE:
> +		((u8 *)payload)[0] = PKTHDR_DATA0_GET(ph);
> +		word_count++;
> +		length = word_count;
> +		break;
> +	case MIPI_DSI_RX_DCS_LONG_READ_RESPONSE:
> +	case MIPI_DSI_RX_GENERIC_LONG_READ_RESPONSE:
> +		word_count = PKTHDR_WC_GET(ph);
> +		if (word_count > length) {
> +			DRM_DEV_ERROR(dsim->dev, "invalid receive buffer length\n");
> +			return -EINVAL;
> +		}
> +
> +		length = word_count;
> +
> +		while (word_count >= 4) {
> +			pl = dsim_read(dsim, DSIM_RXFIFO);
> +			((u8 *)payload)[0] = pl & 0xff;
> +			((u8 *)payload)[1] = (pl >> 8)  & 0xff;
> +			((u8 *)payload)[2] = (pl >> 16) & 0xff;
> +			((u8 *)payload)[3] = (pl >> 24) & 0xff;
> +			payload += 4;
> +			word_count -= 4;
> +		}
> +
> +		if (word_count > 0) {
> +			pl = dsim_read(dsim, DSIM_RXFIFO);
> +
> +			switch (word_count) {
> +			case 3:
> +				((u8 *)payload)[2] = (pl >> 16) & 0xff;
> +				/* fall through */
> +			case 2:
> +				((u8 *)payload)[1] = (pl >> 8) & 0xff;
> +				/* fall through */
> +			case 1:
> +				((u8 *)payload)[0] = pl & 0xff;
> +				break;
> +			}
> +		}
> +
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	return length;
> +}
> +
> +static ssize_t sec_dsim_host_transfer(struct mipi_dsi_host *host,
> +					   const struct mipi_dsi_msg *msg)
> +{
> +	int ret;
> +	bool use_lpm;
> +	struct mipi_dsi_packet packet;
> +	struct sec_dsim *dsim = host_to_dsim(host);
> +
> +	if ((msg->rx_buf && !msg->rx_len) || (msg->rx_len && !msg->rx_buf))
> +		return -EINVAL;
> +
> +	ret = mipi_dsi_create_packet(&packet, msg);
> +	if (ret) {
> +		DRM_DEV_ERROR(dsim->dev, "failed to create dsi packet: %d\n", ret);
> +		return ret;
> +	}
> +
> +	/* need to read data from peripheral */
> +	if (unlikely(msg->rx_buf))
> +		reinit_completion(&dsim->rx_done);
> +
> +	/* config LPM for CMD TX */
> +	use_lpm = msg->flags & MIPI_DSI_MSG_USE_LPM ? true : false;
> +	sec_dsim_config_cmd_lpm(dsim, use_lpm);
> +
> +	if (packet.payload_length) {		/* Long Packet case */
> +		reinit_completion(&dsim->pl_tx_done);
> +
> +		/* write packet payload */
> +		sec_dsim_write_pl_to_sfr_fifo(dsim,
> +						   packet.payload,
> +						   packet.payload_length);
> +
> +		/* write packet header */
> +		sec_dsim_write_ph_to_sfr_fifo(dsim,
> +						   packet.header,
> +						   use_lpm);
> +
> +		ret = wait_for_completion_timeout(&dsim->ph_tx_done,
> +						  MIPI_FIFO_TIMEOUT);
> +		if (!ret) {
> +			DRM_DEV_ERROR(dsim->dev, "wait payload tx done time out\n");
> +			return -EBUSY;
> +		}
> +	} else {
> +		reinit_completion(&dsim->ph_tx_done);
> +
> +		/* write packet header */
> +		sec_dsim_write_ph_to_sfr_fifo(dsim,
> +						   packet.header,
> +						   use_lpm);
> +
> +		ret = wait_for_completion_timeout(&dsim->ph_tx_done,
> +						  MIPI_FIFO_TIMEOUT);
> +		if (!ret) {
> +			DRM_DEV_ERROR(dsim->dev, "wait pkthdr tx done time out\n");
> +			return -EBUSY;
> +		}
> +	}
> +
> +	/* read packet payload */
> +	if (unlikely(msg->rx_buf)) {
> +		ret = wait_for_completion_timeout(&dsim->rx_done,
> +						  MIPI_FIFO_TIMEOUT);
> +		if (!ret) {
> +			DRM_DEV_ERROR(dsim->dev, "wait rx done time out\n");
> +			return -EBUSY;
> +		}
> +
> +		ret = sec_dsim_read_pl_from_sfr_fifo(dsim,
> +							  msg->rx_buf,
> +							  msg->rx_len);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int sec_dsim_host_attach(struct mipi_dsi_host *host,
> +				struct mipi_dsi_device *device)
> +{
> +	struct sec_dsim *dsim = host_to_dsim(host);
> +
> +	dsim->lanes	 = device->lanes;
> +	dsim->channel	 = device->channel;
> +	dsim->format	 = device->format;
> +	dsim->mode_flags = device->mode_flags;
> +
> +	return 0;
> +}
> +
> +static const struct mipi_dsi_host_ops sec_dsim_host_ops = {
> +	.attach   = sec_dsim_host_attach,
> +	.transfer = sec_dsim_host_transfer,
> +};
> +
> +static void sec_dsim_video_mode(struct sec_dsim *dsim)
> +{
> +	struct drm_display_mode *mode = &dsim->mode;
> +	unsigned int bpp = mipi_dsi_pixel_format_to_bpp(dsim->format);
> +	const struct dsim_hblank_par *hpar = NULL;
> +	unsigned int hfp, hbp, hsa, vfp, vbp, vsa;
> +	unsigned int hfp_wc, hbp_wc, hsa_wc, wc;
> +	unsigned int reg;
> +
> +	hfp = mode->hsync_start - mode->hdisplay;
> +	hbp = mode->htotal - mode->hsync_end;
> +	hsa = mode->hsync_end - mode->hsync_start;
> +	vfp = mode->vsync_start - mode->vdisplay;
> +	vbp = mode->vtotal - mode->vsync_end;
> +	vsa = mode->vsync_end - mode->vsync_start;
> +
> +	if (dsim->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) {
> +		hpar = sec_dsim_get_hblank_par(dsim);
> +		if (!hpar)
> +			DRM_DEV_DEBUG(dsim->dev,
> +				      "No pre-exist hpar can be used\n");
> +	}
> +
> +	/* vertical porch */
> +	reg = dsim_read(dsim, DSIM_MVPORCH);
> +
> +	reg &= ~MVPORCH_MAINVBP_MASK;
> +	reg |= MVPORCH_MAINVBP(vbp);
> +	reg &= ~MVPORCH_STABLEVFP_MASK;
> +	reg |= MVPORCH_STABLEVFP(vfp);
> +	reg &= ~MVPORCH_CMDALLOW_MASK;
> +	reg |= MVPORCH_CMDALLOW(0x0);
> +	dsim_write(dsim, DSIM_MVPORCH, reg);
> +
> +	if (!hpar) {
> +		wc = DIV_ROUND_UP(hfp * (bpp >> 3), dsim->lanes);
> +		hfp_wc = wc > DSIM_HFP_PKT_OVERHEAD ?
> +			 wc - DSIM_HFP_PKT_OVERHEAD : hfp;
> +		wc = DIV_ROUND_UP(hbp * (bpp >> 3), dsim->lanes);
> +		hbp_wc = wc > DSIM_HBP_PKT_OVERHEAD ?
> +			 wc - DSIM_HBP_PKT_OVERHEAD : hbp;
> +	} else {
> +		hfp_wc = hpar->hfp_wc;
> +		hbp_wc = hpar->hbp_wc;
> +	}
> +
> +	/* horizontal porch */
> +	reg = dsim_read(dsim, DSIM_MHPORCH);
> +
> +	reg &= ~MVPORCH_MAINHBP_MASK;
> +	reg |= MVPORCH_MAINHBP(hbp_wc);
> +	reg &= ~MVPORCH_MAINHFP_MASK;
> +	reg |= MVPORCH_MAINHFP(hfp_wc);
> +	dsim_write(dsim, DSIM_MHPORCH, reg);
> +
> +	if (!hpar) {
> +		wc = DIV_ROUND_UP(hsa * (bpp >> 3), dsim->lanes);
> +		hsa_wc = wc > DSIM_HSA_PKT_OVERHEAD ?
> +			 wc - DSIM_HSA_PKT_OVERHEAD : hsa;
> +	} else {
> +		hsa_wc = hpar->hsa_wc;
> +	}
> +
> +	/* sync area */
> +	reg = dsim_read(dsim, DSIM_MSYNC);
> +
> +	reg &= ~MVPORCH_MAINHSA_MASK;
> +	reg |= MVPORCH_MAINHSA(hsa_wc);
> +	reg &= ~MVPORCH_MAINVSA_MASK;
> +	reg |= MVPORCH_MAINVSA(vsa);
> +	dsim_write(dsim, DSIM_MSYNC, reg);
> +}
> +
> +static void sec_dsim_display_mode(struct sec_dsim *dsim)
> +{
> +	struct drm_display_mode *mode = &dsim->mode;
> +	u32 reg;
> +
> +	if (dsim->mode_flags & MIPI_DSI_MODE_VIDEO)
> +		sec_dsim_video_mode(dsim);
> +
> +	/* image resolution */
> +	reg = dsim_read(dsim, DSIM_MDRESOL);
> +
> +	reg &= ~MVPORCH_MAINHRESOL_MASK;
> +	reg |= MVPORCH_MAINHRESOL(mode->hdisplay);
> +	reg &= ~MVPORCH_MAINVRESOL_MASK;
> +	reg |= MVPORCH_MAINVRESOL(mode->vdisplay);
> +
> +	dsim_write(dsim, DSIM_MDRESOL, reg);
> +}
> +
> +static void sec_dsim_config_bridge(struct sec_dsim *dsim)
> +{
> +	const struct sec_dsim_plat_data *pdata = dsim->pdata;
> +	u32 reg;
> +
> +	reg = dsim_read(dsim, DSIM_CONFIG);
> +
> +	if (dsim->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) {
> +		reg |= CONFIG_NON_CONTINUOUS_CLOCK_LANE;
> +		reg |= CONFIG_CLKLANE_STOP_START;
> +	}
> +
> +	if (!(dsim->mode_flags & MIPI_DSI_MODE_VSYNC_FLUSH))
> +		reg |= CONFIG_MFLUSH_VS;
> +
> +	/* disable EoT packets in HS mode */
> +	if (!(dsim->mode_flags & MIPI_DSI_MODE_EOT_PACKET))
> +		reg |= CONFIG_EOT_R03;
> +
> +	if (dsim->mode_flags & MIPI_DSI_MODE_VIDEO) {
> +		reg |= CONFIG_VIDEOMODE;
> +
> +		if (dsim->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
> +			reg |= CONFIG_BURSTMODE;
> +
> +		else if (dsim->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
> +			reg |= CONFIG_SYNCINFORM;
> +
> +		if (dsim->mode_flags & MIPI_DSI_MODE_VIDEO_AUTO_VERT)
> +			reg |= CONFIG_AUTOMODE;
> +
> +		if (dsim->mode_flags & MIPI_DSI_MODE_VIDEO_HSE)
> +			reg |= CONFIG_HSEDISABLEMODE;
> +
> +		if (!(dsim->mode_flags & MIPI_DSI_MODE_VIDEO_HFP))
> +			reg |= CONFIG_HFPDISABLEMODE;
> +
> +		if (!(dsim->mode_flags & MIPI_DSI_MODE_VIDEO_HBP))
> +			reg |= CONFIG_HBPDISABLEMODE;
> +
> +		if (!(dsim->mode_flags & MIPI_DSI_MODE_VIDEO_HSA))
> +			reg |= CONFIG_HSADISABLEMODE;
> +	}
> +
> +	/* pixel format */
> +	reg &= ~CONFIG_MAINPIXFORMAT_MASK;
> +	if (dsim->mode_flags & MIPI_DSI_MODE_VIDEO) {
> +		switch (dsim->format) {
> +		case MIPI_DSI_FMT_RGB565:
> +			reg |= CONFIG_MAINPIXFORMAT(0x4);
> +			break;
> +		case MIPI_DSI_FMT_RGB666_PACKED:
> +			reg |= CONFIG_MAINPIXFORMAT(0x5);
> +			break;
> +		case MIPI_DSI_FMT_RGB666:
> +			reg |= CONFIG_MAINPIXFORMAT(0x6);
> +			break;
> +		case MIPI_DSI_FMT_RGB888:
> +			reg |= CONFIG_MAINPIXFORMAT(0x7);
> +			break;
> +		default:
> +			reg |= CONFIG_MAINPIXFORMAT(0x7);
> +			break;
> +		}
> +	}
> +
> +	/* number of data lanes */
> +	reg &= ~CONFIG_NUMOFDATLANE_MASK;
> +	reg |= CONFIG_NUMOFDATLANE(dsim->lanes - 1);
> +
> +	/* enable data, clock lane */
> +	reg &= ~CONFIG_LANEEN_MASK;
> +	reg |= CONFIG_LANEEN(BIT(dsim->lanes) - 1);
> +	reg |= CONFIG_CLKLANEEN;
> +
> +	dsim_write(dsim, DSIM_CONFIG, reg);
> +
> +	/* escape mode */
> +	reg = dsim_read(dsim, DSIM_ESCMODE);
> +
> +	reg &= ~ESCMODE_STOPSTATE_CN_MASK;
> +	reg |= ESCMODE_STOPSTATE_CN(pdata->esc_stop_state_cnt);
> +	dsim_write(dsim, DSIM_ESCMODE, reg);
> +
> +	/* timeout */
> +	reg = dsim_read(dsim, DSIM_TIMEOUT);
> +
> +	reg &= ~TIMEOUT_LPDRTOUT_MASK;
> +	reg |= TIMEOUT_LPDRTOUT(0xffff);
> +	reg &= ~TIMEOUT_BTAOUT_MASK;
> +	reg |= TIMEOUT_BTAOUT(0xff);
> +	dsim_write(dsim, DSIM_TIMEOUT, reg);
> +}
> +
> +#ifndef MHZ
> +#define MHZ	(1000*1000)
> +#endif
> +
> +static unsigned long sec_dsim_pll_find_pms(struct sec_dsim *dsim,
> +					   unsigned long fin,
> +					   unsigned long fout,
> +					   u8 *p, u16 *m, u8 *s)
> +{
> +	const struct sec_dsim_plat_data *pdata = dsim->pdata;
> +	unsigned long best_freq = 0;
> +	u32 min_delta = 0xffffffff;
> +	u8 p_min, p_max;
> +	u8 _p, best_p;
> +	u16 _m, best_m;
> +	u8 _s, best_s;
> +
> +	p_min = DIV_ROUND_UP(fin, (12 * MHZ));
> +	p_max = fin / (6 * MHZ);
> +
> +	for (_p = p_min; _p <= p_max; ++_p) {
> +		for (_s = 0; _s <= 5; ++_s) {
> +			u64 tmp;
> +			u32 delta;
> +
> +			tmp = (u64)fout * (_p << _s);
> +			do_div(tmp, fin);
> +			_m = tmp;
> +			if (_m < 41 || _m > 125)
> +				continue;
> +
> +			tmp = (u64)_m * fin;
> +			do_div(tmp, _p);
> +			if (tmp < 500 * MHZ || tmp > pdata->max_freq_hz * MHZ)
> +				continue;
> +
> +			tmp = (u64)_m * fin;
> +			do_div(tmp, _p << _s);
> +
> +			delta = abs(fout - tmp);
> +			if (delta < min_delta) {
> +				best_p = _p;
> +				best_m = _m;
> +				best_s = _s;
> +				min_delta = delta;
> +				best_freq = tmp;
> +			}
> +		}
> +	}
> +
> +	if (best_freq) {
> +		*p = best_p;
> +		*m = best_m;
> +		*s = best_s;
> +	}
> +
> +	return best_freq;
> +}
> +
> +static unsigned long sec_dsim_set_pll(struct sec_dsim *dsim)
> +{
> +	unsigned long fin, fout, freq;
> +	u8 p, s;
> +	u16 m;
> +	u32 reg;
> +
> +	fin = dsim->pll_clk_hz;
> +	freq = dsim->burst_clk_hz;
> +	fout = sec_dsim_pll_find_pms(dsim, fin, freq, &p, &m, &s);
> +	if (!fout) {
> +		DRM_DEV_ERROR(dsim->dev,
> +			      "failed to find PLL PMS for requested frequency\n");
> +		return 0;
> +	}
> +	DRM_DEV_DEBUG(dsim->dev,
> +		      "PLL freq %lu, (p %d, m %d, s %d)\n", fout, p, m, s);
> +
> +	reg = PLLCTRL_PLLEN | PLLCTRL_PMS_P(p) | PLLCTRL_PMS_M(m) | PLLCTRL_PMS_S(s);
> +
> +	dsim_write(dsim, DSIM_PLLCTRL, reg);
> +
> +	regmap_read_poll_timeout(dsim->regmap, DSIM_STATUS, reg,
> +				 reg & STATUS_PLLSTABLE, 0, 1000);
> +	return fout;
> +}
> +
> +static int sec_dsim_enable_clock(struct sec_dsim *dsim)
> +{
> +	const struct sec_dsim_plat_data *pdata = dsim->pdata;
> +	unsigned long hs_clk, byte_clk, esc_clk;
> +	unsigned long esc_div;
> +	u32 reg;
> +
> +	/* pll timer */
> +	dsim_write(dsim, DSIM_PLLTMR, pdata->pll_timer);
> +
> +	/* pll control */
> +	hs_clk = sec_dsim_set_pll(dsim);
> +	if (!hs_clk) {
> +		DRM_DEV_ERROR(dsim->dev, "failed to configure DSI PLL\n");
> +		return -EFAULT;
> +	}
> +
> +	byte_clk = hs_clk / 8;
> +	esc_div = DIV_ROUND_UP(byte_clk, dsim->esc_clk_hz);
> +	esc_clk = byte_clk / esc_div;
> +
> +	if (esc_clk > 20 * MHZ) {
> +		++esc_div;
> +		esc_clk = byte_clk / esc_div;
> +	}
> +
> +	DRM_DEV_DEBUG(dsim->dev,
> +		      "PLL: hs_clk = %lu, byte_clk = %lu, esc_clk = %lu, esc_div = %lu\n",
> +		      hs_clk, byte_clk, esc_clk, esc_div);
> +
> +	/* clk control */
> +	reg = dsim_read(dsim, DSIM_CLKCTRL);
> +
> +	reg |= CLKCTRL_TXREQUESTHSCLK;
> +	reg |= CLKCTRL_ESCCLKEN;
> +	reg &= ~CLKCTRL_PLLBYPASS;
> +	reg &= ~CLKCTRL_BYTECLKSRC_MASK;
> +	reg |= CLKCTRL_BYTECLKEN;
> +	reg &= ~CLKCTRL_LANEESCDATAEN_MASK;
> +	reg |= CLKCTRL_LANEESCDATAEN(BIT(dsim->lanes) - 1);
> +	reg |= CLKCTRL_LANEESCCLKEN;
> +	reg &= ~CLKCTRL_ESCPRESCALER_MASK;
> +	reg |= CLKCTRL_ESCPRESCALER(esc_div);
> +
> +	dsim_write(dsim, DSIM_CLKCTRL, reg);
> +
> +	return 0;
> +}
> +
> +static void sec_dsim_fifo_enable(struct sec_dsim *dsim, bool enable)
> +{
> +	u32 reg;
> +
> +	reg = dsim_read(dsim, DSIM_FIFOCTRL);
> +
> +	reg &= ~FIFOCTRL_INIT_MASK;
> +	dsim_write(dsim, DSIM_FIFOCTRL, reg);
> +	udelay(500);
> +
> +	if (!enable)
> +		return;
> +
> +	reg |= FIFOCTRL_NINITRX	|
> +	       FIFOCTRL_NINITSFR |
> +	       FIFOCTRL_NINITI80 |
> +	       FIFOCTRL_NINITSUB |
> +	       FIFOCTRL_NINITMAIN;
> +	dsim_write(dsim, DSIM_FIFOCTRL, reg);
> +	udelay(500);
> +}
> +
> +static void sec_dsim_set_display(struct sec_dsim *dsim, bool enable)
> +{
> +	u32 reg;
> +
> +	reg = dsim_read(dsim, DSIM_MDRESOL);
> +
> +	if (enable)
> +		reg |= MDRESOL_MAINSTANDBY;
> +	else
> +		reg &= ~MDRESOL_MAINSTANDBY;
> +	dsim_write(dsim, DSIM_MDRESOL, reg);
> +}
> +
> +static void sec_dsim_bridge_enable(struct drm_bridge *bridge)
> +{
> +	struct sec_dsim *dsim = bridge_to_dsim(bridge);
> +	int ret;
> +
> +	/* enable bridge clocks */
> +	clk_prepare_enable(dsim->clk_bus);
> +	clk_prepare_enable(dsim->clk_phy_ref);
> +
> +	/* initialize the irq */
> +	sec_dsim_irq_init(dsim);
> +
> +	/* configure the bridge */
> +	sec_dsim_config_bridge(dsim);
> +
> +	/* enable fifo control */
> +	sec_dsim_fifo_enable(dsim, true);
> +
> +	/* configure the display mode */
> +	sec_dsim_display_mode(dsim);
> +
> +	/* config dsim pll */
> +	ret = sec_dsim_enable_clock(dsim);
> +	if (ret) {
> +		DRM_DEV_ERROR(dsim->dev, "failed to enable clock: %d\n", ret);
> +		return;
> +	}
> +
> +	/* power on the dphy */
> +	ret = phy_init(dsim->phy);
> +	if (ret) {
> +		DRM_DEV_ERROR(dsim->dev, "failed to init phy %d\n", ret);
> +		return;
> +	}
> +
> +	/* power on the dphy */
> +	ret = phy_power_on(dsim->phy);
> +	if (ret) {
> +		DRM_DEV_ERROR(dsim->dev, "failed to enable phy %d\n", ret);
> +		return;
> +	}
> +
> +	/* enable data transfer */
> +	sec_dsim_set_display(dsim, true);
> +}
> +
> +static void sec_dsim_disable_clock(struct sec_dsim *dsim)
> +{
> +	u32 reg;
> +
> +	/* clk control */
> +	reg = dsim_read(dsim, DSIM_CLKCTRL);
> +
> +	reg &= ~CLKCTRL_TXREQUESTHSCLK;
> +	reg &= ~CLKCTRL_BYTECLKEN;
> +	reg &= ~CLKCTRL_ESCCLKEN;
> +	reg &= ~CLKCTRL_LANEESCDATAEN_MASK;
> +	reg &= ~CLKCTRL_LANEESCCLKEN;
> +	dsim_write(dsim, DSIM_CLKCTRL, reg);
> +
> +	/* pll control */
> +	reg  = dsim_read(dsim, DSIM_PLLCTRL);
> +
> +	reg &= ~PLLCTRL_PLLEN;
> +	dsim_write(dsim, DSIM_PLLCTRL, reg);
> +}
> +
> +static void sec_dsim_bridge_disable(struct drm_bridge *bridge)
> +{
> +	struct sec_dsim *dsim = bridge_to_dsim(bridge);
> +
> +	/* disable data transfer */
> +	sec_dsim_set_display(dsim, false);
> +
> +	/* disable bridge clocks */
> +	sec_dsim_disable_clock(dsim);
> +
> +	/* disable fifo control */
> +	sec_dsim_fifo_enable(dsim, false);
> +
> +	/* power off the phy */
> +	phy_power_off(dsim->phy);
> +
> +	/* exit the phy */
> +	phy_exit(dsim->phy);
> +
> +	/* disable bridge clock */
> +	clk_disable_unprepare(dsim->clk_phy_ref);
> +	clk_disable_unprepare(dsim->clk_bus);
> +}
> +
> +static bool sec_dsim_bridge_mode_fixup(struct drm_bridge *bridge,
> +				       const struct drm_display_mode *mode,
> +				       struct drm_display_mode *adjusted_mode)
> +{
> +	adjusted_mode->flags |= (DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
> +	adjusted_mode->flags &= ~(DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
> +
> +	return true;
> +}
> +
> +static void sec_dsim_bridge_mode_set(struct drm_bridge *bridge,
> +				     const struct drm_display_mode *mode,
> +				     const struct drm_display_mode *adjusted_mode)
> +{
> +	struct sec_dsim *dsim = bridge_to_dsim(bridge);
> +
> +	drm_mode_copy(&dsim->mode, adjusted_mode);
> +}
> +
> +static int sec_dsim_bridge_attach(struct drm_bridge *bridge,
> +				  enum drm_bridge_attach_flags flags)
> +{
> +	struct sec_dsim *dsim = bridge_to_dsim(bridge);
> +	struct drm_bridge *panel_bridge;
> +	struct drm_panel *panel;
> +	int ret;
> +
> +	ret = drm_of_find_panel_or_bridge(dsim->dev->of_node, 1, 0, &panel,
> +					  &panel_bridge);
> +	if (ret)
> +		return ret;
> +
> +	if (panel) {
> +		panel_bridge = drm_panel_bridge_add(panel);
> +		if (IS_ERR(panel_bridge))
> +			return PTR_ERR(panel_bridge);
> +	}
> +	dsim->panel_bridge = panel_bridge;
> +
> +	if (!dsim->panel_bridge)
> +		return -EPROBE_DEFER;
> +
> +	return drm_bridge_attach(bridge->encoder, dsim->panel_bridge, bridge,
> +				 flags);
> +}
> +
> +static void sec_dsim_bridge_detach(struct drm_bridge *bridge)
> +{
> +	struct sec_dsim *dsim = bridge_to_dsim(bridge);
> +
> +	drm_of_panel_bridge_remove(dsim->dev->of_node, 1, 0);
> +}
> +
> +static const struct drm_bridge_funcs sec_dsim_bridge_funcs = {
> +	.enable		= sec_dsim_bridge_enable,
> +	.disable	= sec_dsim_bridge_disable,
> +	.mode_set	= sec_dsim_bridge_mode_set,
> +	.mode_fixup	= sec_dsim_bridge_mode_fixup,
> +	.attach		= sec_dsim_bridge_attach,
> +	.detach		= sec_dsim_bridge_detach,
> +};
> +
> +static const struct drm_bridge_timings sec_dsim_bridge_timings = {
> +	.input_bus_flags = DRM_BUS_FLAG_DE_LOW,
> +};
> +
> +static const struct sec_dsim_plat_data imx8mm_mipi_dsim_plat_data = {
> +	.version		= 0x1060200,
> +	.pll_timer		= 500,
> +	.max_freq_hz		= 2100,
> +	.esc_stop_state_cnt	= 0xf,
> +};
> +
> +static const struct of_device_id sec_dsim_dt_ids[] = {
> +	{
> +		.compatible = "fsl,imx8mm-sec-dsim",
> +		.data = &imx8mm_mipi_dsim_plat_data,
> +	},
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, sec_dsim_dt_ids);
> +
> +static int sec_dsim_parse_dt(struct sec_dsim *dsim)
> +{
> +	struct platform_device *pdev = to_platform_device(dsim->dev);
> +	struct device *dev = dsim->dev;
> +	struct device_node *node = dev->of_node;
> +	struct clk *clk;
> +	void __iomem *base;
> +	u32 value;
> +	int irq;
> +	int ret;
> +
> +	base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(base))
> +		return PTR_ERR(base);
> +
> +	dsim->regmap = devm_regmap_init_mmio(dev, base, &sec_dsim_regmap_config);
> +	if (IS_ERR(dsim->regmap)) {
> +		ret = PTR_ERR(dsim->regmap);
> +		DRM_DEV_ERROR(dev, "failed to create sec dsim regmap: %d\n", ret);
> +		return ret;
> +	}
> +
> +	dsim->phy = devm_phy_get(dev, "dphy");
> +	if (IS_ERR(dsim->phy)) {
> +		DRM_DEV_ERROR(dev, "failed to get dsim phy\n");
> +		return PTR_ERR(dsim->phy);
> +	}
> +
> +	clk = devm_clk_get(dev, "bus");
> +	if (IS_ERR(clk)) {
> +		ret = PTR_ERR(clk);
> +		DRM_DEV_ERROR(dev, "failed to get bus clock: %d\n", ret);
> +		return ret;
> +	}
> +	dsim->clk_bus = clk;
> +
> +	clk = devm_clk_get(dev, "phy_ref");
> +	if (IS_ERR(clk)) {
> +		ret = PTR_ERR(clk);
> +		DRM_DEV_ERROR(dev, "failed to get phy_ref clock: %d\n", ret);
> +		return ret;
> +	}
> +	dsim->clk_phy_ref = clk;
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0)
> +		return -ENODEV;
> +
> +	ret = devm_request_irq(dev, irq, sec_dsim_irq_handler, 0, dev_name(dev), dsim);
> +	if (ret) {
> +		DRM_DEV_ERROR(dev, "failed to request dsim irq: %d\n", ret);
> +		return ret;
> +	}
> +
> +	if (!of_property_read_u32(node, "samsung,pll-clock-frequency", &value))
> +		dsim->pll_clk_hz = value;
> +
> +	if (!of_property_read_u32(node, "samsung,burst-clock-frequency", &value))
> +		dsim->burst_clk_hz = value;
> +
> +	if (!of_property_read_u32(node, "samsung,esc-clock-frequency", &value))
> +		dsim->esc_clk_hz = value;
> +
> +	init_completion(&dsim->pll_stable);
> +	init_completion(&dsim->ph_tx_done);
> +	init_completion(&dsim->pl_tx_done);
> +	init_completion(&dsim->rx_done);
> +
> +	return 0;
> +}
> +
> +static int sec_dsim_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	const struct of_device_id *of_id;
> +	struct sec_dsim *dsim;
> +	int version;
> +	int ret;
> +
> +	dsim = devm_kzalloc(dev, sizeof(*dsim), GFP_KERNEL);
> +	if (!dsim) {
> +		DRM_DEV_ERROR(dev, "failed to allocate dsim\n");
> +		return -ENOMEM;
> +	}
> +
> +	of_id = of_match_device(sec_dsim_dt_ids, dev);
> +	if (!of_id)
> +		return -ENODEV;
> +
> +	dsim->pdata = of_id->data;
> +	dsim->dev = dev;
> +
> +	ret = sec_dsim_parse_dt(dsim);
> +	if (ret) {
> +		DRM_DEV_ERROR(dev, "failed to parse dt: %d\n", ret);
> +		return ret;
> +	}
> +
> +	version = dsim_read(dsim, DSIM_VERSION);
> +	WARN_ON(version != dsim->pdata->version);
> +	DRM_DEV_INFO(dev, "DSIM version number is %#x\n", version);
> +
> +	dsim->host.ops = &sec_dsim_host_ops;
> +	dsim->host.dev = dsim->dev;
> +
> +	ret = mipi_dsi_host_register(&dsim->host);
> +	if (ret) {
> +		DRM_DEV_ERROR(dev, "failed to register mipi dsi host: %d\n", ret);
> +		return ret;
> +	}
> +
> +	dsim->bridge.driver_private = dsim;
> +	dsim->bridge.funcs = &sec_dsim_bridge_funcs;
> +	dsim->bridge.of_node = dev->of_node;
> +	dsim->bridge.timings = &sec_dsim_bridge_timings;
> +
> +	dev_set_drvdata(dev, dsim);
> +
> +	drm_bridge_add(&dsim->bridge);
> +
> +	return 0;
> +}
> +
> +static int sec_dsim_remove(struct platform_device *pdev)
> +{
> +	struct sec_dsim *dsim = platform_get_drvdata(pdev);
> +
> +	mipi_dsi_host_unregister(&dsim->host);
> +	drm_bridge_remove(&dsim->bridge);
> +
> +	return 0;
> +}
> +
> +struct platform_driver sec_dsim_driver = {
> +	.probe    = sec_dsim_probe,
> +	.remove   = sec_dsim_remove,
> +	.driver   = {
> +		.name = DRIVER_NAME,
> +		.of_match_table = sec_dsim_dt_ids,
> +	},
> +};
> +
> +module_platform_driver(sec_dsim_driver);
> +
> +MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>");
> +MODULE_DESCRIPTION("Samsung SEC MIPI DSIM Bridge driver");
> +MODULE_LICENSE("GPL v2");
Fabio Estevam June 24, 2021, 2:48 a.m. UTC | #2
Hi Jagan/Laurent,

On Wed, Jun 23, 2021 at 7:23 PM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:

> Looking at the register set, it seems to match the Exynos 5433,
> supported by drivers/gpu/drm/exynos/exynos_drm_dsi.c. Can we leverage
> that driver instead of adding a new one for the same IP core ?

Yes. there was an attempt from Michael in this direction:
https://patchwork.kernel.org/project/dri-devel/cover/20200911135413.3654800-1-m.tretter@pengutronix.de/

Cheers
Krzysztof Kozlowski June 24, 2021, 8:30 a.m. UTC | #3
On 24/06/2021 04:48, Fabio Estevam wrote:
> Hi Jagan/Laurent,
> 
> On Wed, Jun 23, 2021 at 7:23 PM Laurent Pinchart
> <laurent.pinchart@ideasonboard.com> wrote:
> 
>> Looking at the register set, it seems to match the Exynos 5433,
>> supported by drivers/gpu/drm/exynos/exynos_drm_dsi.c. Can we leverage
>> that driver instead of adding a new one for the same IP core ?
> 
> Yes. there was an attempt from Michael in this direction:
> https://patchwork.kernel.org/project/dri-devel/cover/20200911135413.3654800-1-m.tretter@pengutronix.de/

That's the proper direction (maybe as Marek suggested - sharing common
code like for Analogix DP), not duplicating a driver.


Best regards,
Krzysztof
Jagan Teki June 24, 2021, 12:11 p.m. UTC | #4
Hi Laurent,

On Thu, Jun 24, 2021 at 3:53 AM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Jagan,
>
> Thank you for the patch.
>
> On Mon, Jun 21, 2021 at 12:54:17PM +0530, Jagan Teki wrote:
> > Samsung SEC MIPI DSIM Bridge controller is MIPI DSI bridge
> > available in NXP's i.MX8M Mini and Nano Processors.
> >
> > Add bridge driver for it.
> >
> > Cc: Andrzej Hajda <a.hajda@samsung.com>
> > Cc: Neil Armstrong <narmstrong@baylibre.com>
> > Cc: Robert Foss <robert.foss@linaro.org>
> > Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > ---
> >  drivers/gpu/drm/bridge/Kconfig    |   15 +
> >  drivers/gpu/drm/bridge/Makefile   |    1 +
> >  drivers/gpu/drm/bridge/sec-dsim.c | 1535 +++++++++++++++++++++++++++++
> >  3 files changed, 1551 insertions(+)
> >  create mode 100644 drivers/gpu/drm/bridge/sec-dsim.c
> >
> > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> > index 19109c0b5481..a183eb165a35 100644
> > --- a/drivers/gpu/drm/bridge/Kconfig
> > +++ b/drivers/gpu/drm/bridge/Kconfig
> > @@ -189,6 +189,21 @@ config DRM_PARADE_PS8640
> >         The PS8640 is a high-performance and low-power
> >         MIPI DSI to eDP converter
> >
> > +config DRM_SEC_MIPI_DSIM
> > +     tristate "Samsung SEC MIPI DSIM Bridge controller"
> > +     depends on DRM
> > +     depends on COMMON_CLK
> > +     depends on OF && HAS_IOMEM
> > +     select DRM_KMS_HELPER
> > +     select DRM_MIPI_DSI
> > +     select DRM_PANEL_BRIDGE
> > +     select GENERIC_PHY_MIPI_DPHY
> > +     select MFD_SYSCON
> > +     select REGMAP_MMIO
> > +     help
> > +       This enables the Samsung SEC MIPI DSIM Bridge controller as
> > +       for example found on NXP's i.MX8M Mini and Nano Processors.
> > +
> >  config DRM_SIL_SII8620
> >       tristate "Silicon Image SII8620 HDMI/MHL bridge"
> >       depends on OF
> > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> > index 88e4edf81087..ff802a4ffe65 100644
> > --- a/drivers/gpu/drm/bridge/Makefile
> > +++ b/drivers/gpu/drm/bridge/Makefile
> > @@ -12,6 +12,7 @@ obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v
> >  obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
> >  obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
> >  obj-$(CONFIG_DRM_PARADE_PS8640) += parade-ps8640.o
> > +obj-$(CONFIG_DRM_SEC_MIPI_DSIM) += sec-dsim.o
> >  obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o
> >  obj-$(CONFIG_DRM_SII902X) += sii902x.o
> >  obj-$(CONFIG_DRM_SII9234) += sii9234.o
> > diff --git a/drivers/gpu/drm/bridge/sec-dsim.c b/drivers/gpu/drm/bridge/sec-dsim.c
> > new file mode 100644
> > index 000000000000..5b6645bb94e7
> > --- /dev/null
> > +++ b/drivers/gpu/drm/bridge/sec-dsim.c
> > @@ -0,0 +1,1535 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Samsung SEC MIPI DSIM Bridge
> > + *
> > + * Copyright (C) 2018 NXP
> > + * Copyright (c) 2014 Samsung Electronics Co., Ltd
> > + * Copyright (C) 2021 Amarula Solutions(India)
> > + *
> > + * Based on the drivers/gpu/drm/exynos/exynos_drm_dsi.c
> > + *
> > + * Authors:
> > + * Tomasz Figa <t.figa@samsung.com>
> > + * Andrzej Hajda <a.hajda@samsung.com>
> > + * Fancy Fang <chen.fang@nxp.com>
> > + * Jagan Teki <jagan@amarulasolutions.com>
> > + */
> > +
> > +#include <asm/unaligned.h>
> > +#include <linux/bitfield.h>
> > +#include <linux/clk.h>
> > +#include <linux/completion.h>
> > +#include <linux/delay.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/of_graph.h>
> > +#include <linux/phy/phy.h>
> > +#include <linux/regmap.h>
> > +
> > +#include <drm/drm_atomic_helper.h>
> > +#include <drm/drm_bridge.h>
> > +#include <drm/drm_mipi_dsi.h>
> > +#include <drm/drm_panel.h>
> > +#include <drm/drm_of.h>
> > +#include <drm/drm_print.h>
> > +
> > +#include <video/mipi_display.h>
> > +
> > +#define DRIVER_NAME                  "sec-dsim"
> > +
> > +/* dsim registers */
> > +#define DSIM_VERSION                 0x00
> > +#define DSIM_STATUS                  0x04
> > +#define DSIM_RGB_STATUS                      0x08
> > +#define DSIM_SWRST                   0x0c
> > +#define DSIM_CLKCTRL                 0x10
> > +#define DSIM_TIMEOUT                 0x14
> > +#define DSIM_CONFIG                  0x18
> > +#define DSIM_ESCMODE                 0x1c
> > +#define DSIM_MDRESOL                 0x20
> > +#define DSIM_MVPORCH                 0x24
> > +#define DSIM_MHPORCH                 0x28
> > +#define DSIM_MSYNC                   0x2c
> > +#define DSIM_SDRESOL                 0x30
> > +#define DSIM_INTSRC                  0x34
> > +#define DSIM_INTMSK                  0x38
> > +#define DSIM_PKTHDR                  0x3c
> > +#define DSIM_PAYLOAD                 0x40
> > +#define DSIM_RXFIFO                  0x44
> > +#define DSIM_FIFOTHLD                        0x48
> > +#define DSIM_FIFOCTRL                        0x4c
> > +#define DSIM_MEMACCHR                        0x50
> > +#define DSIM_MULTI_PKT                       0x78
> > +#define DSIM_PLLCTRL_1G                      0x90
> > +#define DSIM_PLLCTRL                 0x94
> > +#define DSIM_PLLCTRL1                        0x98
> > +#define DSIM_PLLCTRL2                        0x9c
> > +#define DSIM_PLLTMR                  0xa0
>
> Looking at the register set, it seems to match the Exynos 5433,
> supported by drivers/gpu/drm/exynos/exynos_drm_dsi.c. Can we leverage
> that driver instead of adding a new one for the same IP core ?

I thought the same initially, but the PLLOut computation seems
different than the one in the i.MX8MM Reference Manual. I need to find
whether this exynos_dsi is compatible or working on my i.MX8MM
platform and send the next version changes accordingly. thanks.

--
Jagan Teki,
Jagan Teki June 24, 2021, 12:12 p.m. UTC | #5
Hi Fabio,

On Thu, Jun 24, 2021 at 8:18 AM Fabio Estevam <festevam@gmail.com> wrote:
>
> Hi Jagan/Laurent,
>
> On Wed, Jun 23, 2021 at 7:23 PM Laurent Pinchart
> <laurent.pinchart@ideasonboard.com> wrote:
>
> > Looking at the register set, it seems to match the Exynos 5433,
> > supported by drivers/gpu/drm/exynos/exynos_drm_dsi.c. Can we leverage
> > that driver instead of adding a new one for the same IP core ?
>
> Yes. there was an attempt from Michael in this direction:
> https://patchwork.kernel.org/project/dri-devel/cover/20200911135413.3654800-1-m.tretter@pengutronix.de/

Thanks for the reference, I will check it out and see I can send any
updated versions wrt my i.MX8MM platform.

Jagan.
Laurent Pinchart June 24, 2021, 12:17 p.m. UTC | #6
Hi Jagan,

On Thu, Jun 24, 2021 at 05:42:43PM +0530, Jagan Teki wrote:
> On Thu, Jun 24, 2021 at 8:18 AM Fabio Estevam wrote:
> > On Wed, Jun 23, 2021 at 7:23 PM Laurent Pinchart wrote:
> >
> > > Looking at the register set, it seems to match the Exynos 5433,
> > > supported by drivers/gpu/drm/exynos/exynos_drm_dsi.c. Can we leverage
> > > that driver instead of adding a new one for the same IP core ?
> >
> > Yes. there was an attempt from Michael in this direction:
> > https://patchwork.kernel.org/project/dri-devel/cover/20200911135413.3654800-1-m.tretter@pengutronix.de/
> 
> Thanks for the reference, I will check it out and see I can send any
> updated versions wrt my i.MX8MM platform.

Thanks.

I had a brief look at the exynos driver, and I think it should be turned
into a DRM bridge as part of this rework to be used with the i.MX8MM.

Is there someone from Samsung who could assist, at least to test the
changes ?
Jagan Teki June 24, 2021, 12:32 p.m. UTC | #7
Hi Laurent,

On Thu, Jun 24, 2021 at 5:48 PM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Jagan,
>
> On Thu, Jun 24, 2021 at 05:42:43PM +0530, Jagan Teki wrote:
> > On Thu, Jun 24, 2021 at 8:18 AM Fabio Estevam wrote:
> > > On Wed, Jun 23, 2021 at 7:23 PM Laurent Pinchart wrote:
> > >
> > > > Looking at the register set, it seems to match the Exynos 5433,
> > > > supported by drivers/gpu/drm/exynos/exynos_drm_dsi.c. Can we leverage
> > > > that driver instead of adding a new one for the same IP core ?
> > >
> > > Yes. there was an attempt from Michael in this direction:
> > > https://patchwork.kernel.org/project/dri-devel/cover/20200911135413.3654800-1-m.tretter@pengutronix.de/
> >
> > Thanks for the reference, I will check it out and see I can send any
> > updated versions wrt my i.MX8MM platform.
>
> Thanks.
>
> I had a brief look at the exynos driver, and I think it should be turned
> into a DRM bridge as part of this rework to be used with the i.MX8MM.
>
> Is there someone from Samsung who could assist, at least to test the
> changes ?

I have hardware to verify it on i.MX8MM but from exynos I don't have
any contact from Samsung to suggest or test. Maybe I can add Tomasz
Figa while sending the changes?

I understand that there are 2 key implementations.

1. Adjust the exynos_drm_dsi.c by dropping component_ops as i.MX8MM
flow with LCDIF doesn't have component_ops (make sure it works with
exynos platform first)
2. Sec DSIM Bridge driver common cross Exynos and i.MX8MM platform
drivers or only one Sec DSIM bridge driver to handle both the
platforms by differentiating compatible and driver data

Any more suggestions would be appreciated?

Jagan.
Fabio Estevam June 24, 2021, 12:46 p.m. UTC | #8
Hi Jagan,

On Thu, Jun 24, 2021 at 9:32 AM Jagan Teki <jagan@amarulasolutions.com> wrote:

> > I had a brief look at the exynos driver, and I think it should be turned
> > into a DRM bridge as part of this rework to be used with the i.MX8MM.
> >
> > Is there someone from Samsung who could assist, at least to test the
> > changes ?
>
> I have hardware to verify it on i.MX8MM but from exynos I don't have
> any contact from Samsung to suggest or test. Maybe I can add Tomasz
> Figa while sending the changes?

Adding Inki Dae and Marek Szyprowski from Samsung who helped to review
Michael's series.

> I understand that there are 2 key implementations.
>
> 1. Adjust the exynos_drm_dsi.c by dropping component_ops as i.MX8MM
> flow with LCDIF doesn't have component_ops (make sure it works with
> exynos platform first)
> 2. Sec DSIM Bridge driver common cross Exynos and i.MX8MM platform
> drivers or only one Sec DSIM bridge driver to handle both the
> platforms by differentiating compatible and driver data
>
> Any more suggestions would be appreciated?
>
> Jagan.
Laurent Pinchart June 24, 2021, 12:46 p.m. UTC | #9
On Thu, Jun 24, 2021 at 06:02:36PM +0530, Jagan Teki wrote:
> Hi Laurent,
> 
> On Thu, Jun 24, 2021 at 5:48 PM Laurent Pinchart
> <laurent.pinchart@ideasonboard.com> wrote:
> >
> > Hi Jagan,
> >
> > On Thu, Jun 24, 2021 at 05:42:43PM +0530, Jagan Teki wrote:
> > > On Thu, Jun 24, 2021 at 8:18 AM Fabio Estevam wrote:
> > > > On Wed, Jun 23, 2021 at 7:23 PM Laurent Pinchart wrote:
> > > >
> > > > > Looking at the register set, it seems to match the Exynos 5433,
> > > > > supported by drivers/gpu/drm/exynos/exynos_drm_dsi.c. Can we leverage
> > > > > that driver instead of adding a new one for the same IP core ?
> > > >
> > > > Yes. there was an attempt from Michael in this direction:
> > > > https://patchwork.kernel.org/project/dri-devel/cover/20200911135413.3654800-1-m.tretter@pengutronix.de/
> > >
> > > Thanks for the reference, I will check it out and see I can send any
> > > updated versions wrt my i.MX8MM platform.
> >
> > Thanks.
> >
> > I had a brief look at the exynos driver, and I think it should be turned
> > into a DRM bridge as part of this rework to be used with the i.MX8MM.
> >
> > Is there someone from Samsung who could assist, at least to test the
> > changes ?
> 
> I have hardware to verify it on i.MX8MM but from exynos I don't have
> any contact from Samsung to suggest or test. Maybe I can add Tomasz
> Figa while sending the changes?

Tomasz hasn't been working for Samsung for a loooong time (I've dropped
his Samsung address from the CC list for this reason).

> I understand that there are 2 key implementations.
> 
> 1. Adjust the exynos_drm_dsi.c by dropping component_ops as i.MX8MM
> flow with LCDIF doesn't have component_ops (make sure it works with
> exynos platform first)

I think it should be turned into a real drm_bridge, it's currently
implemented based on drm_encoder.

> 2. Sec DSIM Bridge driver common cross Exynos and i.MX8MM platform
> drivers or only one Sec DSIM bridge driver to handle both the
> platforms by differentiating compatible and driver data
> 
> Any more suggestions would be appreciated?
Jagan Teki June 25, 2021, 8:19 a.m. UTC | #10
On Thu, Jun 24, 2021 at 6:17 PM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> On Thu, Jun 24, 2021 at 06:02:36PM +0530, Jagan Teki wrote:
> > Hi Laurent,
> >
> > On Thu, Jun 24, 2021 at 5:48 PM Laurent Pinchart
> > <laurent.pinchart@ideasonboard.com> wrote:
> > >
> > > Hi Jagan,
> > >
> > > On Thu, Jun 24, 2021 at 05:42:43PM +0530, Jagan Teki wrote:
> > > > On Thu, Jun 24, 2021 at 8:18 AM Fabio Estevam wrote:
> > > > > On Wed, Jun 23, 2021 at 7:23 PM Laurent Pinchart wrote:
> > > > >
> > > > > > Looking at the register set, it seems to match the Exynos 5433,
> > > > > > supported by drivers/gpu/drm/exynos/exynos_drm_dsi.c. Can we leverage
> > > > > > that driver instead of adding a new one for the same IP core ?
> > > > >
> > > > > Yes. there was an attempt from Michael in this direction:
> > > > > https://patchwork.kernel.org/project/dri-devel/cover/20200911135413.3654800-1-m.tretter@pengutronix.de/
> > > >
> > > > Thanks for the reference, I will check it out and see I can send any
> > > > updated versions wrt my i.MX8MM platform.
> > >
> > > Thanks.
> > >
> > > I had a brief look at the exynos driver, and I think it should be turned
> > > into a DRM bridge as part of this rework to be used with the i.MX8MM.
> > >
> > > Is there someone from Samsung who could assist, at least to test the
> > > changes ?
> >
> > I have hardware to verify it on i.MX8MM but from exynos I don't have
> > any contact from Samsung to suggest or test. Maybe I can add Tomasz
> > Figa while sending the changes?
>
> Tomasz hasn't been working for Samsung for a loooong time (I've dropped
> his Samsung address from the CC list for this reason).

Okay. I think exynos drm maintainers might help out here, but not sure of it.

>
> > I understand that there are 2 key implementations.
> >
> > 1. Adjust the exynos_drm_dsi.c by dropping component_ops as i.MX8MM
> > flow with LCDIF doesn't have component_ops (make sure it works with
> > exynos platform first)
>
> I think it should be turned into a real drm_bridge, it's currently
> implemented based on drm_encoder.

Yes, ie what I'm trying for.

Jagan.
Krzysztof Kozlowski June 25, 2021, 9:21 a.m. UTC | #11
On Thu, 24 Jun 2021 at 14:19, Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Jagan,
>
> On Thu, Jun 24, 2021 at 05:42:43PM +0530, Jagan Teki wrote:
> > On Thu, Jun 24, 2021 at 8:18 AM Fabio Estevam wrote:
> > > On Wed, Jun 23, 2021 at 7:23 PM Laurent Pinchart wrote:
> > >
> > > > Looking at the register set, it seems to match the Exynos 5433,
> > > > supported by drivers/gpu/drm/exynos/exynos_drm_dsi.c. Can we leverage
> > > > that driver instead of adding a new one for the same IP core ?
> > >
> > > Yes. there was an attempt from Michael in this direction:
> > > https://patchwork.kernel.org/project/dri-devel/cover/20200911135413.3654800-1-m.tretter@pengutronix.de/
> >
> > Thanks for the reference, I will check it out and see I can send any
> > updated versions wrt my i.MX8MM platform.
>
> Thanks.
>
> I had a brief look at the exynos driver, and I think it should be turned
> into a DRM bridge as part of this rework to be used with the i.MX8MM.
>
> Is there someone from Samsung who could assist, at least to test the
> changes ?

Yes, I mentioned few guys in reply to PHY. Around the DRM drivers you
can get in touch with:
Inki Dae <inki.dae@samsung.com>
Seung-Woo Kim <sw0312.kim@samsung.com>
Marek Szyprowski <m.szyprowski@samsung.com>
Andrzej Hajda <a.hajda@samsung.com>

The easiest testing of the display stack would be on Hardkernel's Odroid
XU4 (https://www.hardkernel.com/shop/odroid-xu4-special-price/) however
you will not test the DSI/DSIM directly (it has only HDMI port).

Best regards,
Krzysztof
Best regards,
Krzysztof
Jagan Teki June 25, 2021, 10:08 a.m. UTC | #12
Hi Krzysztof,

On Fri, Jun 25, 2021 at 2:51 PM Krzysztof Kozlowski
<krzysztof.kozlowski@canonical.com> wrote:
>
> On Thu, 24 Jun 2021 at 14:19, Laurent Pinchart
> <laurent.pinchart@ideasonboard.com> wrote:
> >
> > Hi Jagan,
> >
> > On Thu, Jun 24, 2021 at 05:42:43PM +0530, Jagan Teki wrote:
> > > On Thu, Jun 24, 2021 at 8:18 AM Fabio Estevam wrote:
> > > > On Wed, Jun 23, 2021 at 7:23 PM Laurent Pinchart wrote:
> > > >
> > > > > Looking at the register set, it seems to match the Exynos 5433,
> > > > > supported by drivers/gpu/drm/exynos/exynos_drm_dsi.c. Can we leverage
> > > > > that driver instead of adding a new one for the same IP core ?
> > > >
> > > > Yes. there was an attempt from Michael in this direction:
> > > > https://patchwork.kernel.org/project/dri-devel/cover/20200911135413.3654800-1-m.tretter@pengutronix.de/
> > >
> > > Thanks for the reference, I will check it out and see I can send any
> > > updated versions wrt my i.MX8MM platform.
> >
> > Thanks.
> >
> > I had a brief look at the exynos driver, and I think it should be turned
> > into a DRM bridge as part of this rework to be used with the i.MX8MM.
> >
> > Is there someone from Samsung who could assist, at least to test the
> > changes ?
>
> Yes, I mentioned few guys in reply to PHY. Around the DRM drivers you
> can get in touch with:
> Inki Dae <inki.dae@samsung.com>
> Seung-Woo Kim <sw0312.kim@samsung.com>
> Marek Szyprowski <m.szyprowski@samsung.com>
> Andrzej Hajda <a.hajda@samsung.com>

Thanks for the information.

>
> The easiest testing of the display stack would be on Hardkernel's Odroid
> XU4 (https://www.hardkernel.com/shop/odroid-xu4-special-price/) however
> you will not test the DSI/DSIM directly (it has only HDMI port).

Look like I found one board with Exynos5430 with DSI. Does this SoC is
same as mainline Exynos5433?

Jagan.
Krzysztof Kozlowski June 25, 2021, 10:27 a.m. UTC | #13
On 25/06/2021 12:08, Jagan Teki wrote:
> Hi Krzysztof,
> 
> On Fri, Jun 25, 2021 at 2:51 PM Krzysztof Kozlowski
> <krzysztof.kozlowski@canonical.com> wrote:
>>
>> On Thu, 24 Jun 2021 at 14:19, Laurent Pinchart
>> <laurent.pinchart@ideasonboard.com> wrote:
>>>
>>> Hi Jagan,
>>>
>>> On Thu, Jun 24, 2021 at 05:42:43PM +0530, Jagan Teki wrote:
>>>> On Thu, Jun 24, 2021 at 8:18 AM Fabio Estevam wrote:
>>>>> On Wed, Jun 23, 2021 at 7:23 PM Laurent Pinchart wrote:
>>>>>
>>>>>> Looking at the register set, it seems to match the Exynos 5433,
>>>>>> supported by drivers/gpu/drm/exynos/exynos_drm_dsi.c. Can we leverage
>>>>>> that driver instead of adding a new one for the same IP core ?
>>>>>
>>>>> Yes. there was an attempt from Michael in this direction:
>>>>> https://patchwork.kernel.org/project/dri-devel/cover/20200911135413.3654800-1-m.tretter@pengutronix.de/
>>>>
>>>> Thanks for the reference, I will check it out and see I can send any
>>>> updated versions wrt my i.MX8MM platform.
>>>
>>> Thanks.
>>>
>>> I had a brief look at the exynos driver, and I think it should be turned
>>> into a DRM bridge as part of this rework to be used with the i.MX8MM.
>>>
>>> Is there someone from Samsung who could assist, at least to test the
>>> changes ?
>>
>> Yes, I mentioned few guys in reply to PHY. Around the DRM drivers you
>> can get in touch with:
>> Inki Dae <inki.dae@samsung.com>
>> Seung-Woo Kim <sw0312.kim@samsung.com>
>> Marek Szyprowski <m.szyprowski@samsung.com>
>> Andrzej Hajda <a.hajda@samsung.com>
> 
> Thanks for the information.
> 
>>
>> The easiest testing of the display stack would be on Hardkernel's Odroid
>> XU4 (https://www.hardkernel.com/shop/odroid-xu4-special-price/) however
>> you will not test the DSI/DSIM directly (it has only HDMI port).
> 
> Look like I found one board with Exynos5430 with DSI. Does this SoC is
> same as mainline Exynos5433?

No, Exynos5430 is ARMv7. Looks like improvement over Exynos5422.
Exynos5422 has a very good support in mainline while Exynso5430 was
never touched at all.

Exynos5433 is ARMv8, although many things are shared with 5422. About
DSI I have no clue.


Best regards,
Krzysztof
Frieder Schrempf June 28, 2021, 8:19 a.m. UTC | #14
Hi Jagan,

On 24.06.21 10:30, Krzysztof Kozlowski wrote:
> On 24/06/2021 04:48, Fabio Estevam wrote:
>> Hi Jagan/Laurent,
>>
>> On Wed, Jun 23, 2021 at 7:23 PM Laurent Pinchart
>> <laurent.pinchart@ideasonboard.com> wrote:
>>
>>> Looking at the register set, it seems to match the Exynos 5433,
>>> supported by drivers/gpu/drm/exynos/exynos_drm_dsi.c. Can we leverage
>>> that driver instead of adding a new one for the same IP core ?
>>
>> Yes. there was an attempt from Michael in this direction:
>> https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.kernel.org%2Fproject%2Fdri-devel%2Fcover%2F20200911135413.3654800-1-m.tretter%40pengutronix.de%2F&amp;data=04%7C01%7Cfrieder.schrempf%40kontron.de%7C52db05459ef0462d5a9b08d936eab1ba%7C8c9d3c973fd941c8a2b1646f3942daf1%7C0%7C0%7C637601203901391193%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=LTYk9kpUeB9bgfRITQT6wIij3XTOIk37AHXbzQ2UI4Y%3D&amp;reserved=0
> 
> That's the proper direction (maybe as Marek suggested - sharing common
> code like for Analogix DP), not duplicating a driver.
> 

Just to make sure that you are aware of the previous patches and discussions here are some additional pointers:

* i.MX8MM glue code from Marek (+ Cc): [1]
* DPHY driver from Marek: [2]
* General discussion about driver implementation: [3]
* Daniel's (+ Cc) suggested direction to move forward: [4]

It looks like you already did a fork of the Exynos driver, so your approach might be generally in line with what Daniel suggested.

Best regards
Frieder

[1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20201005134250.527153-3-marex@denx.de/
[2] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20201003225020.164358-1-marex@denx.de/
[3] https://patchwork.kernel.org/project/dri-devel/patch/20200911135413.3654800-11-m.tretter@pengutronix.de/
[4] https://patchwork.kernel.org/project/dri-devel/patch/20200911135413.3654800-11-m.tretter@pengutronix.de/#23995147
Jagan Teki June 30, 2021, 10:21 a.m. UTC | #15
Hi Frieder,

Thanks for sharing the details.

On Mon, Jun 28, 2021 at 1:49 PM Frieder Schrempf
<frieder.schrempf@kontron.de> wrote:
>
> Hi Jagan,
>
> On 24.06.21 10:30, Krzysztof Kozlowski wrote:
> > On 24/06/2021 04:48, Fabio Estevam wrote:
> >> Hi Jagan/Laurent,
> >>
> >> On Wed, Jun 23, 2021 at 7:23 PM Laurent Pinchart
> >> <laurent.pinchart@ideasonboard.com> wrote:
> >>
> >>> Looking at the register set, it seems to match the Exynos 5433,
> >>> supported by drivers/gpu/drm/exynos/exynos_drm_dsi.c. Can we leverage
> >>> that driver instead of adding a new one for the same IP core ?
> >>
> >> Yes. there was an attempt from Michael in this direction:
> >> https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.kernel.org%2Fproject%2Fdri-devel%2Fcover%2F20200911135413.3654800-1-m.tretter%40pengutronix.de%2F&amp;data=04%7C01%7Cfrieder.schrempf%40kontron.de%7C52db05459ef0462d5a9b08d936eab1ba%7C8c9d3c973fd941c8a2b1646f3942daf1%7C0%7C0%7C637601203901391193%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=LTYk9kpUeB9bgfRITQT6wIij3XTOIk37AHXbzQ2UI4Y%3D&amp;reserved=0
> >
> > That's the proper direction (maybe as Marek suggested - sharing common
> > code like for Analogix DP), not duplicating a driver.
> >
>
> Just to make sure that you are aware of the previous patches and discussions here are some additional pointers:
>
> * i.MX8MM glue code from Marek (+ Cc): [1]
> * DPHY driver from Marek: [2]
> * General discussion about driver implementation: [3]
> * Daniel's (+ Cc) suggested direction to move forward: [4]

It Looks like Daniel's suggestion is to have a common bridge driver
without sharing a code between platforms. It makes sense and clean but
the key issues lie on the exynos side, the exynos drm drives require
potential changes and tests, which indeed are hard but possible -
IMHO. However there is another issue with component_ops the i.MX8M
side MXSFB doesn't use any component_ops but the exynos are fully
component aware.

>
> It looks like you already did a fork of the Exynos driver, so your approach might be generally in line with what Daniel suggested.

I did use PMS computation from exynos and reference driver from imx8
tree. Last 2 days I worked on exynos_drm_dsi.c (with some additions)
and converted a bridge driver and it worked on my i.MX8MM platform.

Right now, I'm checking the possible implementations and will come
back to my approach for further comments.

Jagan.
diff mbox series

Patch

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 19109c0b5481..a183eb165a35 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -189,6 +189,21 @@  config DRM_PARADE_PS8640
 	  The PS8640 is a high-performance and low-power
 	  MIPI DSI to eDP converter
 
+config DRM_SEC_MIPI_DSIM
+	tristate "Samsung SEC MIPI DSIM Bridge controller"
+	depends on DRM
+	depends on COMMON_CLK
+	depends on OF && HAS_IOMEM
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select DRM_PANEL_BRIDGE
+	select GENERIC_PHY_MIPI_DPHY
+	select MFD_SYSCON
+	select REGMAP_MMIO
+	help
+	  This enables the Samsung SEC MIPI DSIM Bridge controller as
+	  for example found on NXP's i.MX8M Mini and Nano Processors.
+
 config DRM_SIL_SII8620
 	tristate "Silicon Image SII8620 HDMI/MHL bridge"
 	depends on OF
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 88e4edf81087..ff802a4ffe65 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -12,6 +12,7 @@  obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v
 obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
 obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
 obj-$(CONFIG_DRM_PARADE_PS8640) += parade-ps8640.o
+obj-$(CONFIG_DRM_SEC_MIPI_DSIM) += sec-dsim.o
 obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o
 obj-$(CONFIG_DRM_SII902X) += sii902x.o
 obj-$(CONFIG_DRM_SII9234) += sii9234.o
diff --git a/drivers/gpu/drm/bridge/sec-dsim.c b/drivers/gpu/drm/bridge/sec-dsim.c
new file mode 100644
index 000000000000..5b6645bb94e7
--- /dev/null
+++ b/drivers/gpu/drm/bridge/sec-dsim.c
@@ -0,0 +1,1535 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Samsung SEC MIPI DSIM Bridge
+ *
+ * Copyright (C) 2018 NXP
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd
+ * Copyright (C) 2021 Amarula Solutions(India)
+ *
+ * Based on the drivers/gpu/drm/exynos/exynos_drm_dsi.c
+ *
+ * Authors:
+ * Tomasz Figa <t.figa@samsung.com>
+ * Andrzej Hajda <a.hajda@samsung.com>
+ * Fancy Fang <chen.fang@nxp.com>
+ * Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include <asm/unaligned.h>
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_of.h>
+#include <drm/drm_print.h>
+
+#include <video/mipi_display.h>
+
+#define DRIVER_NAME			"sec-dsim"
+
+/* dsim registers */
+#define DSIM_VERSION			0x00
+#define DSIM_STATUS			0x04
+#define DSIM_RGB_STATUS			0x08
+#define DSIM_SWRST			0x0c
+#define DSIM_CLKCTRL			0x10
+#define DSIM_TIMEOUT			0x14
+#define DSIM_CONFIG			0x18
+#define DSIM_ESCMODE			0x1c
+#define DSIM_MDRESOL			0x20
+#define DSIM_MVPORCH			0x24
+#define DSIM_MHPORCH			0x28
+#define DSIM_MSYNC			0x2c
+#define DSIM_SDRESOL			0x30
+#define DSIM_INTSRC			0x34
+#define DSIM_INTMSK			0x38
+#define DSIM_PKTHDR			0x3c
+#define DSIM_PAYLOAD			0x40
+#define DSIM_RXFIFO			0x44
+#define DSIM_FIFOTHLD			0x48
+#define DSIM_FIFOCTRL			0x4c
+#define DSIM_MEMACCHR			0x50
+#define DSIM_MULTI_PKT			0x78
+#define DSIM_PLLCTRL_1G			0x90
+#define DSIM_PLLCTRL			0x94
+#define DSIM_PLLCTRL1			0x98
+#define DSIM_PLLCTRL2			0x9c
+#define DSIM_PLLTMR			0xa0
+
+/* register bit fields */
+#define STATUS_PLLSTABLE		BIT(31)
+#define STATUS_SWRSTRLS			BIT(20)
+#define STATUS_TXREADYHSCLK		BIT(10)
+#define STATUS_ULPSCLK			BIT(9)
+#define STATUS_STOPSTATECLK		BIT(8)
+
+#define CLKCTRL_TXREQUESTHSCLK		BIT(31)
+#define CLKCTRL_ESCCLKEN		BIT(28)
+#define CLKCTRL_PLLBYPASS		BIT(27)
+#define CLKCTRL_BYTECLKSRC_MASK		GENMASK(26, 25)
+#define CLKCTRL_BYTECLKSRC(x)		FIELD_PREP(CLKCTRL_BYTECLKSRC_MASK, (x))
+#define CLKCTRL_BYTECLKEN		BIT(24)
+#define CLKCTRL_LANEESCDATAEN_MASK	GENMASK(23, 20)
+#define CLKCTRL_LANEESCDATAEN(x)	FIELD_PREP(CLKCTRL_LANEESCDATAEN_MASK, (x))
+#define CLKCTRL_LANEESCCLKEN		BIT(19)
+#define CLKCTRL_ESCPRESCALER_MASK	GENMASK(15, 0)
+#define CLKCTRL_ESCPRESCALER(x)		FIELD_PREP(CLKCTRL_ESCPRESCALER_MASK, (x))
+
+#define TIMEOUT_BTAOUT_MASK		GENMASK(23, 16)
+#define TIMEOUT_BTAOUT(x)		FIELD_PREP(TIMEOUT_BTAOUT_MASK, (x))
+#define TIMEOUT_LPDRTOUT_MASK		GENMASK(15, 0)
+#define TIMEOUT_LPDRTOUT(x)		FIELD_PREP(TIMEOUT_LPDRTOUT_MASK, (x))
+
+#define CONFIG_NON_CONTINUOUS_CLOCK_LANE	BIT(31)
+#define CONFIG_CLKLANE_STOP_START	BIT(30)
+#define CONFIG_MFLUSH_VS		BIT(29)
+#define CONFIG_EOT_R03			BIT(28)
+#define CONFIG_SYNCINFORM		BIT(27)
+#define CONFIG_BURSTMODE		BIT(26)
+#define CONFIG_VIDEOMODE		BIT(25)
+#define CONFIG_AUTOMODE			BIT(24)
+#define CONFIG_HSEDISABLEMODE		BIT(23)
+#define CONFIG_HFPDISABLEMODE		BIT(22)
+#define CONFIG_HBPDISABLEMODE		BIT(21)
+#define CONFIG_HSADISABLEMODE		BIT(20)
+
+#define CONFIG_MAINPIXFORMAT_MASK	GENMASK(14, 12)
+#define CONFIG_MAINPIXFORMAT(x)		FIELD_PREP(CONFIG_MAINPIXFORMAT_MASK, (x))
+#define CONFIG_NUMOFDATLANE_MASK	GENMASK(6, 5)
+#define CONFIG_NUMOFDATLANE(x)		FIELD_PREP(CONFIG_NUMOFDATLANE_MASK, (x))
+#define CONFIG_LANEEN_MASK		GENMASK(4, 0)
+#define CONFIG_LANEEN(x)		FIELD_PREP(GENMASK(4, 1), (x))
+#define CONFIG_CLKLANEEN		BIT(0)
+
+#define ESCMODE_STOPSTATE_CN_MASK	GENMASK(31, 21)
+#define ESCMODE_STOPSTATE_CN(x)		FIELD_PREP(ESCMODE_STOPSTATE_CN_MASK, (x))
+#define ESCMODE_CMDLPDT			BIT(7)
+
+#define MDRESOL_MAINSTANDBY		BIT(31)
+#define MVPORCH_MAINVRESOL_MASK		GENMASK(27, 16)
+#define MVPORCH_MAINVRESOL(x)		FIELD_PREP(MVPORCH_MAINVRESOL_MASK, (x))
+#define MVPORCH_MAINHRESOL_MASK		GENMASK(11, 0)
+#define MVPORCH_MAINHRESOL(x)		FIELD_PREP(MVPORCH_MAINHRESOL_MASK, (x))
+#define MVPORCH_CMDALLOW_MASK		GENMASK(31, 28)
+#define MVPORCH_CMDALLOW(x)		FIELD_PREP(MVPORCH_CMDALLOW_MASK, (x))
+#define MVPORCH_STABLEVFP_MASK		GENMASK(26, 16)
+#define MVPORCH_STABLEVFP(x)		FIELD_PREP(MVPORCH_STABLEVFP_MASK, (x))
+#define MVPORCH_MAINVBP_MASK		GENMASK(10, 0)
+#define MVPORCH_MAINVBP(x)		FIELD_PREP(MVPORCH_MAINVBP_MASK, (x))
+#define MVPORCH_MAINHFP_MASK		GENMASK(31, 16)
+#define MVPORCH_MAINHFP(x)		FIELD_PREP(MVPORCH_MAINHFP_MASK, (x))
+#define MVPORCH_MAINHBP_MASK		GENMASK(15, 0)
+#define MVPORCH_MAINHBP(x)		FIELD_PREP(MVPORCH_MAINHBP_MASK, (x))
+#define MVPORCH_MAINVSA_MASK		GENMASK(31, 22)
+#define MVPORCH_MAINVSA(x)		FIELD_PREP(MVPORCH_MAINVSA_MASK, (x))
+#define MVPORCH_MAINHSA_MASK		GENMASK(15, 0)
+#define MVPORCH_MAINHSA(x)		FIELD_PREP(MVPORCH_MAINHSA_MASK, (x))
+
+#define INTSRC_PLLSTABLE		BIT(31)
+#define INTSRC_SWRSTRELEASE		BIT(30)
+#define INTSRC_SFRPLFIFOEMPTY		BIT(29)
+#define INTSRC_SFRPHFIFOEMPTY		BIT(28)
+#define INTSRC_FRAMEDONE		BIT(24)
+#define INTSRC_LPDRTOUT			BIT(21)
+#define INTSRC_TATOUT			BIT(20)
+#define INTSRC_RXDATDONE		BIT(18)
+#define INTSRC_RXTE			BIT(17)
+#define INTSRC_RXACK			BIT(16)
+#define INTSRC_MASK			(INTSRC_PLLSTABLE	|	\
+					 INTSRC_SWRSTRELEASE	|	\
+					 INTSRC_SFRPLFIFOEMPTY	|	\
+					 INTSRC_SFRPHFIFOEMPTY	|	\
+					 INTSRC_FRAMEDONE	|	\
+					 INTSRC_LPDRTOUT	|	\
+					 INTSRC_TATOUT		|	\
+					 INTSRC_RXDATDONE	|	\
+					 INTSRC_RXTE		|	\
+					 INTSRC_RXACK)
+
+#define INTMSK_MSKPLLSTABLE		BIT(31)
+#define INTMSK_MSKSWRELEASE		BIT(30)
+#define INTMSK_MSKSFRPLFIFOEMPTY	BIT(29)
+#define INTMSK_MSKSFRPHFIFOEMPTY	BIT(28)
+#define INTMSK_MSKFRAMEDONE		BIT(24)
+#define INTMSK_MSKLPDRTOUT		BIT(21)
+#define INTMSK_MSKTATOUT		BIT(20)
+#define INTMSK_MSKRXDATDONE		BIT(18)
+#define INTMSK_MSKRXTE			BIT(17)
+#define INTMSK_MSKRXACK			BIT(16)
+
+#define PKTHDR_DATA1_MASK		GENMASK(23, 16)
+#define PKTHDR_DATA1(x)			FIELD_PREP(PKTHDR_DATA1_MASK, (x))
+#define PKTHDR_DATA1_GET(x)		FIELD_GET(PKTHDR_DATA1_MASK, (x))
+#define PKTHDR_WC_MASK			GENMASK(23, 8)
+#define PKTHDR_WC_GET(x)		FIELD_GET(PKTHDR_WC_MASK, (x))
+#define PKTHDR_DATA0_MASK		GENMASK(15, 8)
+#define PKTHDR_DATA0(x)			FIELD_PREP(PKTHDR_DATA0_MASK, (x))
+#define PKTHDR_DATA0_GET(x)		FIELD_GET(PKTHDR_DATA0_MASK, (x))
+#define PKTHDR_DI_MASK			GENMASK(7, 0)
+#define PKTHDR_DI(x)			FIELD_PREP(PKTHDR_DI_MASK, (x))
+#define PKTHDR_DT_MASK			GENMASK(5, 0)
+#define PKTHDR_DT_GET(x)		FIELD_GET(PKTHDR_DT_MASK, (x))
+
+#define FIFOCTRL_FULLRX			BIT(25)
+#define FIFOCTRL_EMPTYRX		BIT(24)
+#define FIFOCTRL_FULLHSFR		BIT(23)
+#define FIFOCTRL_EMPTYHSFR		BIT(22)
+#define FIFOCTRL_FULLLSFR		BIT(21)
+#define FIFOCTRL_EMPTYLSFR		BIT(20)
+#define FIFOCTRL_FULLHMAIN		BIT(11)
+#define FIFOCTRL_EMPTYHMAIN		BIT(10)
+#define FIFOCTRL_FULLLMAIN		BIT(9)
+#define FIFOCTRL_EMPTYLMAIN		BIT(8)
+#define FIFOCTRL_NINITRX		BIT(4)
+#define FIFOCTRL_NINITSFR		BIT(3)
+#define FIFOCTRL_NINITI80		BIT(2)
+#define FIFOCTRL_NINITSUB		BIT(1)
+#define FIFOCTRL_NINITMAIN		BIT(0)
+#define FIFOCTRL_INIT_MASK		GENMASK(4, 0)
+
+#define PLLCTRL_PLLEN			BIT(23)
+#define PLLCTRL_PMS_P_MASK		GENMASK(18, 14)
+#define PLLCTRL_PMS_P(x)		FIELD_PREP(PLLCTRL_PMS_P_MASK, (x))
+#define PLLCTRL_PMS_M_MASK		GENMASK(12, 4)
+#define PLLCTRL_PMS_M(x)		FIELD_PREP(PLLCTRL_PMS_M_MASK, (x))
+#define PLLCTRL_PMS_S_MASK		GENMASK(2, 1)
+#define PLLCTRL_PMS_S(x)		FIELD_PREP(PLLCTRL_PMS_S_MASK, (x))
+
+/* dsim all irqs index */
+#define PLLSTABLE			1
+#define SWRSTRELEASE			2
+#define SFRPLFIFOEMPTY			3
+#define SFRPHFIFOEMPTY			4
+#define SYNCOVERRIDE			5
+#define BUSTURNOVER			6
+#define FRAMEDONE			7
+#define LPDRTOUT			8
+#define TATOUT				9
+#define RXDATDONE			10
+#define RXTE				11
+#define RXACK				12
+#define ERRRXECC			13
+#define ERRRXCRC			14
+#define ERRESC3				15
+#define ERRESC2				16
+#define ERRESC1				17
+#define ERRESC0				18
+#define ERRSYNC3			19
+#define ERRSYNC2			20
+#define ERRSYNC1			21
+#define ERRSYNC0			22
+#define ERRCONTROL3			23
+#define ERRCONTROL2			24
+#define ERRCONTROL1			25
+#define ERRCONTROL0			26
+
+#define MIPI_FIFO_TIMEOUT		msecs_to_jiffies(250)
+
+#define DSIM_HFP_PKT_OVERHEAD		6
+#define DSIM_HBP_PKT_OVERHEAD		6
+#define DSIM_HSA_PKT_OVERHEAD		6
+
+struct sec_dsim_plat_data {
+	unsigned int version;
+	unsigned int pll_timer;
+	unsigned int max_freq_hz;
+	unsigned int esc_stop_state_cnt;
+};
+
+struct sec_dsim {
+	struct mipi_dsi_host host;
+	struct drm_bridge bridge;
+	struct drm_bridge *panel_bridge;
+	struct device *dev;
+
+	struct clk *clk_phy_ref;
+	struct clk *clk_bus;
+	struct phy *phy;
+
+	struct regmap *regmap;
+	struct drm_display_mode mode;
+	int irq;
+	unsigned int pll_clk_hz;
+	unsigned int burst_clk_hz;
+	unsigned int esc_clk_hz;
+	unsigned int lanes;
+	unsigned int channel;
+	enum mipi_dsi_pixel_format format;
+	unsigned long mode_flags;
+
+	struct completion pll_stable;
+	struct completion ph_tx_done;
+	struct completion pl_tx_done;
+	struct completion rx_done;
+	const struct sec_dsim_plat_data *pdata;
+};
+
+static const struct regmap_config sec_dsim_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = DSIM_PLLTMR,
+	.name = DRIVER_NAME,
+};
+
+static inline struct sec_dsim *host_to_dsim(struct mipi_dsi_host *host)
+{
+	return container_of(host, struct sec_dsim, host);
+}
+
+static inline struct sec_dsim *bridge_to_dsim(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct sec_dsim, bridge);
+}
+
+/* used for CEA standard modes */
+struct dsim_hblank_par {
+	char *name;		/* drm display mode name */
+	int vrefresh;
+	int hfp_wc;
+	int hbp_wc;
+	int hsa_wc;
+	int lanes;
+};
+
+#define DSIM_HBLANK_PARAM(nm, vf, hfp, hbp, hsa, num)	\
+	.name	  = (nm),				\
+	.vrefresh = (vf),				\
+	.hfp_wc   = (hfp),				\
+	.hbp_wc   = (hbp),				\
+	.hsa_wc   = (hsa),				\
+	.lanes	  = (num)
+
+static const struct dsim_hblank_par hblank_4lanes[] = {
+	/* {  88, 148, 44 } */
+	{ DSIM_HBLANK_PARAM("1920x1080", 60,  60, 105,  27, 4), },
+	/* { 528, 148, 44 } */
+	{ DSIM_HBLANK_PARAM("1920x1080", 50, 390, 105,  27, 4), },
+	/* {  88, 148, 44 } */
+	{ DSIM_HBLANK_PARAM("1920x1080", 30,  60, 105,  27, 4), },
+	/* { 110, 220, 40 } */
+	{ DSIM_HBLANK_PARAM("1280x720",  60,  78, 159,  24, 4), },
+	/* { 440, 220, 40 } */
+	{ DSIM_HBLANK_PARAM("1280x720",  50, 324, 159,  24, 4), },
+	/* {  16,  60, 62 } */
+	{ DSIM_HBLANK_PARAM("720x480",   60,   6,  39,  40, 4), },
+	/* {  12,  68, 64 } */
+	{ DSIM_HBLANK_PARAM("720x576",   50,   3,  45,  42, 4), },
+	/* {  16,  48, 96 } */
+	{ DSIM_HBLANK_PARAM("640x480",   60,   6,  30,  66, 4), },
+};
+
+static const struct dsim_hblank_par hblank_2lanes[] = {
+	/* {  88, 148, 44 } */
+	{ DSIM_HBLANK_PARAM("1920x1080", 30, 114, 210,  60, 2), },
+	/* { 110, 220, 40 } */
+	{ DSIM_HBLANK_PARAM("1280x720",  60, 159, 320,  40, 2), },
+	/* { 440, 220, 40 } */
+	{ DSIM_HBLANK_PARAM("1280x720",  50, 654, 320,  40, 2), },
+	/* {  16,  60, 62 } */
+	{ DSIM_HBLANK_PARAM("720x480",   60,  16,  66,  88, 2), },
+	/* {  12,  68, 64 } */
+	{ DSIM_HBLANK_PARAM("720x576",   50,  12,  96,  72, 2), },
+	/* {  16,  48, 96 } */
+	{ DSIM_HBLANK_PARAM("640x480",   60,  18,  66, 138, 2), },
+};
+
+static
+const struct dsim_hblank_par *sec_dsim_get_hblank_par(struct sec_dsim *dsim)
+{
+	struct drm_display_mode *mode = &dsim->mode;
+	const struct dsim_hblank_par *hpar, *hblank;
+	int i, size;
+
+	if (unlikely(!mode->name))
+		return NULL;
+
+	switch (dsim->lanes) {
+	case 2:
+		hblank = hblank_2lanes;
+		size   = ARRAY_SIZE(hblank_2lanes);
+		break;
+	case 4:
+		hblank = hblank_4lanes;
+		size   = ARRAY_SIZE(hblank_4lanes);
+		break;
+	default:
+		DRM_DEV_ERROR(dsim->dev,
+			      "No hblank data for mode %s with %d lanes\n",
+			      mode->name, dsim->lanes);
+		return NULL;
+	}
+
+	for (i = 0; i < size; i++) {
+		hpar = &hblank[i];
+
+		if (!strcmp(mode->name, hpar->name)) {
+			if (drm_mode_vrefresh(mode) != hpar->vrefresh)
+				continue;
+
+			/* found */
+			return hpar;
+		}
+	}
+
+	return NULL;
+}
+
+static void dsim_write(struct sec_dsim *dsim, unsigned int reg, u32 val)
+{
+	int ret;
+
+	ret = regmap_write(dsim->regmap, reg, val);
+	if (ret < 0)
+		DRM_DEV_ERROR(dsim->dev,
+			      "failed to write sec dsim reg 0x%x: %d\n",
+			      reg, ret);
+}
+
+static u32 dsim_read(struct sec_dsim *dsim, u32 reg)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(dsim->regmap, reg, &val);
+	if (ret < 0)
+		DRM_DEV_ERROR(dsim->dev,
+			      "failed to read sec dsim reg 0x%x: %d\n",
+			      reg, ret);
+
+	return val;
+}
+
+static void __maybe_unused sec_dsim_irq_mask(struct sec_dsim *dsim,
+						  int irq_idx)
+{
+	uint32_t intmsk;
+
+	intmsk = dsim_read(dsim, DSIM_INTMSK);
+
+	switch (irq_idx) {
+	case PLLSTABLE:
+		intmsk |= INTMSK_MSKPLLSTABLE;
+		break;
+	case SWRSTRELEASE:
+		intmsk |= INTMSK_MSKSWRELEASE;
+		break;
+	case SFRPLFIFOEMPTY:
+		intmsk |= INTMSK_MSKSFRPLFIFOEMPTY;
+		break;
+	case SFRPHFIFOEMPTY:
+		intmsk |= INTMSK_MSKSFRPHFIFOEMPTY;
+		break;
+	case FRAMEDONE:
+		intmsk |= INTMSK_MSKFRAMEDONE;
+		break;
+	case LPDRTOUT:
+		intmsk |= INTMSK_MSKLPDRTOUT;
+		break;
+	case TATOUT:
+		intmsk |= INTMSK_MSKTATOUT;
+		break;
+	case RXDATDONE:
+		intmsk |= INTMSK_MSKRXDATDONE;
+		break;
+	case RXTE:
+		intmsk |= INTMSK_MSKRXTE;
+		break;
+	case RXACK:
+		intmsk |= INTMSK_MSKRXACK;
+		break;
+	default:
+		/* unsupported irq */
+		return;
+	}
+
+	dsim_write(dsim, DSIM_INTMSK, intmsk);
+}
+
+static void sec_dsim_irq_unmask(struct sec_dsim *dsim,
+				     int irq_idx)
+{
+	uint32_t intmsk;
+
+	intmsk = dsim_read(dsim, DSIM_INTMSK);
+
+	switch (irq_idx) {
+	case PLLSTABLE:
+		intmsk &= ~INTMSK_MSKPLLSTABLE;
+		break;
+	case SWRSTRELEASE:
+		intmsk &= ~INTMSK_MSKSWRELEASE;
+		break;
+	case SFRPLFIFOEMPTY:
+		intmsk &= ~INTMSK_MSKSFRPLFIFOEMPTY;
+		break;
+	case SFRPHFIFOEMPTY:
+		intmsk &= ~INTMSK_MSKSFRPHFIFOEMPTY;
+		break;
+	case FRAMEDONE:
+		intmsk &= ~INTMSK_MSKFRAMEDONE;
+		break;
+	case LPDRTOUT:
+		intmsk &= ~INTMSK_MSKLPDRTOUT;
+		break;
+	case TATOUT:
+		intmsk &= ~INTMSK_MSKTATOUT;
+		break;
+	case RXDATDONE:
+		intmsk &= ~INTMSK_MSKRXDATDONE;
+		break;
+	case RXTE:
+		intmsk &= ~INTMSK_MSKRXTE;
+		break;
+	case RXACK:
+		intmsk &= ~INTMSK_MSKRXACK;
+		break;
+	default:
+		/* unsupported irq */
+		return;
+	}
+
+	dsim_write(dsim, DSIM_INTMSK, intmsk);
+}
+
+/* write 1 clear irq */
+static void sec_dsim_irq_clear(struct sec_dsim *dsim,
+				    int irq_idx)
+{
+	uint32_t intsrc = 0;
+
+	switch (irq_idx) {
+	case PLLSTABLE:
+		intsrc |= INTSRC_PLLSTABLE;
+		break;
+	case SWRSTRELEASE:
+		intsrc |= INTSRC_SWRSTRELEASE;
+		break;
+	case SFRPLFIFOEMPTY:
+		intsrc |= INTSRC_SFRPLFIFOEMPTY;
+		break;
+	case SFRPHFIFOEMPTY:
+		intsrc |= INTSRC_SFRPHFIFOEMPTY;
+		break;
+	case FRAMEDONE:
+		intsrc |= INTSRC_FRAMEDONE;
+		break;
+	case LPDRTOUT:
+		intsrc |= INTSRC_LPDRTOUT;
+		break;
+	case TATOUT:
+		intsrc |= INTSRC_TATOUT;
+		break;
+	case RXDATDONE:
+		intsrc |= INTSRC_RXDATDONE;
+		break;
+	case RXTE:
+		intsrc |= INTSRC_RXTE;
+		break;
+	case RXACK:
+		intsrc |= INTSRC_RXACK;
+		break;
+	default:
+		/* unsupported irq */
+		return;
+	}
+
+	dsim_write(dsim, DSIM_INTSRC, intsrc);
+}
+
+static void sec_dsim_irq_init(struct sec_dsim *dsim)
+{
+	sec_dsim_irq_unmask(dsim, PLLSTABLE);
+	sec_dsim_irq_unmask(dsim, SWRSTRELEASE);
+}
+
+static irqreturn_t sec_dsim_irq_handler(int irq, void *data)
+{
+	uint32_t intsrc, status;
+	struct sec_dsim *dsim = data;
+
+	intsrc = dsim_read(dsim, DSIM_INTSRC);
+	status = dsim_read(dsim, DSIM_STATUS);
+
+	if (WARN_ON(!intsrc)) {
+		DRM_DEV_ERROR(dsim->dev, "interrupt is not from dsim\n");
+		return IRQ_NONE;
+	}
+
+	if (WARN_ON(!(intsrc & INTSRC_MASK))) {
+		dev_warn(dsim->dev, "unenable irq happens: %#x\n", intsrc);
+		/* just clear irqs */
+		dsim_write(dsim, DSIM_INTSRC, intsrc);
+		return IRQ_NONE;
+	}
+
+	if (intsrc & INTSRC_PLLSTABLE) {
+		WARN_ON(!(status & STATUS_PLLSTABLE));
+		sec_dsim_irq_clear(dsim, PLLSTABLE);
+		complete(&dsim->pll_stable);
+	}
+
+	if (intsrc & INTSRC_SWRSTRELEASE)
+		sec_dsim_irq_clear(dsim, SWRSTRELEASE);
+
+	if (intsrc & INTSRC_SFRPLFIFOEMPTY) {
+		sec_dsim_irq_clear(dsim, SFRPLFIFOEMPTY);
+		complete(&dsim->pl_tx_done);
+	}
+
+	if (intsrc & INTSRC_SFRPHFIFOEMPTY) {
+		sec_dsim_irq_clear(dsim, SFRPHFIFOEMPTY);
+		complete(&dsim->ph_tx_done);
+	}
+
+	if (WARN_ON(intsrc & INTSRC_LPDRTOUT)) {
+		sec_dsim_irq_clear(dsim, LPDRTOUT);
+		dev_warn(dsim->dev, "LP RX timeout\n");
+	}
+
+	if (WARN_ON(intsrc & INTSRC_TATOUT)) {
+		sec_dsim_irq_clear(dsim, TATOUT);
+		dev_warn(dsim->dev, "Turns around Acknowledge timeout\n");
+	}
+
+	if (intsrc & INTSRC_RXDATDONE) {
+		sec_dsim_irq_clear(dsim, RXDATDONE);
+		complete(&dsim->rx_done);
+	}
+
+	if (intsrc & INTSRC_RXTE) {
+		sec_dsim_irq_clear(dsim, RXTE);
+		DRM_DEV_DEBUG(dsim->dev, "TE Rx trigger received\n");
+	}
+
+	if (intsrc & INTSRC_RXACK) {
+		sec_dsim_irq_clear(dsim, RXACK);
+		DRM_DEV_DEBUG(dsim->dev, "ACK Rx trigger received\n");
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void sec_dsim_config_cmd_lpm(struct sec_dsim *dsim, bool enable)
+{
+	u32 reg;
+
+	reg = dsim_read(dsim, DSIM_ESCMODE);
+
+	if (enable)
+		reg |= ESCMODE_CMDLPDT;
+	else
+		reg &= ~ESCMODE_CMDLPDT;
+
+	dsim_write(dsim, DSIM_ESCMODE, reg);
+}
+
+static void sec_dsim_write_pl_to_sfr_fifo(struct sec_dsim *dsim,
+					  const void *payload,
+					  size_t length)
+{
+	uint32_t pl_data;
+
+	if (!length)
+		return;
+
+	while (length >= 4) {
+		pl_data = get_unaligned_le32(payload);
+		dsim_write(dsim, DSIM_PAYLOAD, pl_data);
+		payload += 4;
+		length -= 4;
+	}
+
+	pl_data = 0;
+	switch (length) {
+	case 3:
+		pl_data |= ((u8 *)payload)[2] << 16;
+		/* fallthrough */
+	case 2:
+		pl_data |= ((u8 *)payload)[1] << 8;
+		/* fallthrough */
+	case 1:
+		pl_data |= ((u8 *)payload)[0];
+		dsim_write(dsim, DSIM_PAYLOAD, pl_data);
+		break;
+	}
+}
+
+static void sec_dsim_write_ph_to_sfr_fifo(struct sec_dsim *dsim,
+					       void *header,
+					       bool use_lpm)
+{
+	u32 reg;
+
+	reg = dsim_read(dsim, DSIM_PKTHDR);
+
+	reg &= ~PKTHDR_DATA1_MASK;
+	reg |= PKTHDR_DATA1(((u8 *)header)[2]);	/* WC MSB */
+	reg &= ~PKTHDR_DATA0_MASK;
+	reg |= PKTHDR_DATA0(((u8 *)header)[1]);	/* WC LSB  */
+	reg &= ~PKTHDR_DI_MASK;
+	reg |= PKTHDR_DI(((u8 *)header)[0]);	/* Data ID */
+	dsim_write(dsim, DSIM_PKTHDR, reg);
+}
+
+static int sec_dsim_read_pl_from_sfr_fifo(struct sec_dsim *dsim,
+					       void *payload,
+					       size_t length)
+{
+	uint8_t data_type;
+	uint16_t word_count = 0;
+	uint32_t reg, ph, pl;
+
+	reg = dsim_read(dsim, DSIM_FIFOCTRL);
+
+	if (WARN_ON(reg & FIFOCTRL_EMPTYRX))
+		return -EINVAL;
+
+	ph = dsim_read(dsim, DSIM_RXFIFO);
+	data_type = PKTHDR_DT_GET(ph);
+	switch (data_type) {
+	case MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT:
+		DRM_DEV_ERROR(dsim->dev,
+			      "peripheral report error: (0-7)%lx, (8-15)%lx\n",
+			      PKTHDR_DATA0_GET(ph), PKTHDR_DATA1_GET(ph));
+		return -EPROTO;
+	case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE:
+	case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE:
+		if (!WARN_ON(length < 2)) {
+			((u8 *)payload)[1] = PKTHDR_DATA1_GET(ph);
+			word_count++;
+		}
+		/* fall through */
+	case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE:
+	case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE:
+		((u8 *)payload)[0] = PKTHDR_DATA0_GET(ph);
+		word_count++;
+		length = word_count;
+		break;
+	case MIPI_DSI_RX_DCS_LONG_READ_RESPONSE:
+	case MIPI_DSI_RX_GENERIC_LONG_READ_RESPONSE:
+		word_count = PKTHDR_WC_GET(ph);
+		if (word_count > length) {
+			DRM_DEV_ERROR(dsim->dev, "invalid receive buffer length\n");
+			return -EINVAL;
+		}
+
+		length = word_count;
+
+		while (word_count >= 4) {
+			pl = dsim_read(dsim, DSIM_RXFIFO);
+			((u8 *)payload)[0] = pl & 0xff;
+			((u8 *)payload)[1] = (pl >> 8)  & 0xff;
+			((u8 *)payload)[2] = (pl >> 16) & 0xff;
+			((u8 *)payload)[3] = (pl >> 24) & 0xff;
+			payload += 4;
+			word_count -= 4;
+		}
+
+		if (word_count > 0) {
+			pl = dsim_read(dsim, DSIM_RXFIFO);
+
+			switch (word_count) {
+			case 3:
+				((u8 *)payload)[2] = (pl >> 16) & 0xff;
+				/* fall through */
+			case 2:
+				((u8 *)payload)[1] = (pl >> 8) & 0xff;
+				/* fall through */
+			case 1:
+				((u8 *)payload)[0] = pl & 0xff;
+				break;
+			}
+		}
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return length;
+}
+
+static ssize_t sec_dsim_host_transfer(struct mipi_dsi_host *host,
+					   const struct mipi_dsi_msg *msg)
+{
+	int ret;
+	bool use_lpm;
+	struct mipi_dsi_packet packet;
+	struct sec_dsim *dsim = host_to_dsim(host);
+
+	if ((msg->rx_buf && !msg->rx_len) || (msg->rx_len && !msg->rx_buf))
+		return -EINVAL;
+
+	ret = mipi_dsi_create_packet(&packet, msg);
+	if (ret) {
+		DRM_DEV_ERROR(dsim->dev, "failed to create dsi packet: %d\n", ret);
+		return ret;
+	}
+
+	/* need to read data from peripheral */
+	if (unlikely(msg->rx_buf))
+		reinit_completion(&dsim->rx_done);
+
+	/* config LPM for CMD TX */
+	use_lpm = msg->flags & MIPI_DSI_MSG_USE_LPM ? true : false;
+	sec_dsim_config_cmd_lpm(dsim, use_lpm);
+
+	if (packet.payload_length) {		/* Long Packet case */
+		reinit_completion(&dsim->pl_tx_done);
+
+		/* write packet payload */
+		sec_dsim_write_pl_to_sfr_fifo(dsim,
+						   packet.payload,
+						   packet.payload_length);
+
+		/* write packet header */
+		sec_dsim_write_ph_to_sfr_fifo(dsim,
+						   packet.header,
+						   use_lpm);
+
+		ret = wait_for_completion_timeout(&dsim->ph_tx_done,
+						  MIPI_FIFO_TIMEOUT);
+		if (!ret) {
+			DRM_DEV_ERROR(dsim->dev, "wait payload tx done time out\n");
+			return -EBUSY;
+		}
+	} else {
+		reinit_completion(&dsim->ph_tx_done);
+
+		/* write packet header */
+		sec_dsim_write_ph_to_sfr_fifo(dsim,
+						   packet.header,
+						   use_lpm);
+
+		ret = wait_for_completion_timeout(&dsim->ph_tx_done,
+						  MIPI_FIFO_TIMEOUT);
+		if (!ret) {
+			DRM_DEV_ERROR(dsim->dev, "wait pkthdr tx done time out\n");
+			return -EBUSY;
+		}
+	}
+
+	/* read packet payload */
+	if (unlikely(msg->rx_buf)) {
+		ret = wait_for_completion_timeout(&dsim->rx_done,
+						  MIPI_FIFO_TIMEOUT);
+		if (!ret) {
+			DRM_DEV_ERROR(dsim->dev, "wait rx done time out\n");
+			return -EBUSY;
+		}
+
+		ret = sec_dsim_read_pl_from_sfr_fifo(dsim,
+							  msg->rx_buf,
+							  msg->rx_len);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int sec_dsim_host_attach(struct mipi_dsi_host *host,
+				struct mipi_dsi_device *device)
+{
+	struct sec_dsim *dsim = host_to_dsim(host);
+
+	dsim->lanes	 = device->lanes;
+	dsim->channel	 = device->channel;
+	dsim->format	 = device->format;
+	dsim->mode_flags = device->mode_flags;
+
+	return 0;
+}
+
+static const struct mipi_dsi_host_ops sec_dsim_host_ops = {
+	.attach   = sec_dsim_host_attach,
+	.transfer = sec_dsim_host_transfer,
+};
+
+static void sec_dsim_video_mode(struct sec_dsim *dsim)
+{
+	struct drm_display_mode *mode = &dsim->mode;
+	unsigned int bpp = mipi_dsi_pixel_format_to_bpp(dsim->format);
+	const struct dsim_hblank_par *hpar = NULL;
+	unsigned int hfp, hbp, hsa, vfp, vbp, vsa;
+	unsigned int hfp_wc, hbp_wc, hsa_wc, wc;
+	unsigned int reg;
+
+	hfp = mode->hsync_start - mode->hdisplay;
+	hbp = mode->htotal - mode->hsync_end;
+	hsa = mode->hsync_end - mode->hsync_start;
+	vfp = mode->vsync_start - mode->vdisplay;
+	vbp = mode->vtotal - mode->vsync_end;
+	vsa = mode->vsync_end - mode->vsync_start;
+
+	if (dsim->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) {
+		hpar = sec_dsim_get_hblank_par(dsim);
+		if (!hpar)
+			DRM_DEV_DEBUG(dsim->dev,
+				      "No pre-exist hpar can be used\n");
+	}
+
+	/* vertical porch */
+	reg = dsim_read(dsim, DSIM_MVPORCH);
+
+	reg &= ~MVPORCH_MAINVBP_MASK;
+	reg |= MVPORCH_MAINVBP(vbp);
+	reg &= ~MVPORCH_STABLEVFP_MASK;
+	reg |= MVPORCH_STABLEVFP(vfp);
+	reg &= ~MVPORCH_CMDALLOW_MASK;
+	reg |= MVPORCH_CMDALLOW(0x0);
+	dsim_write(dsim, DSIM_MVPORCH, reg);
+
+	if (!hpar) {
+		wc = DIV_ROUND_UP(hfp * (bpp >> 3), dsim->lanes);
+		hfp_wc = wc > DSIM_HFP_PKT_OVERHEAD ?
+			 wc - DSIM_HFP_PKT_OVERHEAD : hfp;
+		wc = DIV_ROUND_UP(hbp * (bpp >> 3), dsim->lanes);
+		hbp_wc = wc > DSIM_HBP_PKT_OVERHEAD ?
+			 wc - DSIM_HBP_PKT_OVERHEAD : hbp;
+	} else {
+		hfp_wc = hpar->hfp_wc;
+		hbp_wc = hpar->hbp_wc;
+	}
+
+	/* horizontal porch */
+	reg = dsim_read(dsim, DSIM_MHPORCH);
+
+	reg &= ~MVPORCH_MAINHBP_MASK;
+	reg |= MVPORCH_MAINHBP(hbp_wc);
+	reg &= ~MVPORCH_MAINHFP_MASK;
+	reg |= MVPORCH_MAINHFP(hfp_wc);
+	dsim_write(dsim, DSIM_MHPORCH, reg);
+
+	if (!hpar) {
+		wc = DIV_ROUND_UP(hsa * (bpp >> 3), dsim->lanes);
+		hsa_wc = wc > DSIM_HSA_PKT_OVERHEAD ?
+			 wc - DSIM_HSA_PKT_OVERHEAD : hsa;
+	} else {
+		hsa_wc = hpar->hsa_wc;
+	}
+
+	/* sync area */
+	reg = dsim_read(dsim, DSIM_MSYNC);
+
+	reg &= ~MVPORCH_MAINHSA_MASK;
+	reg |= MVPORCH_MAINHSA(hsa_wc);
+	reg &= ~MVPORCH_MAINVSA_MASK;
+	reg |= MVPORCH_MAINVSA(vsa);
+	dsim_write(dsim, DSIM_MSYNC, reg);
+}
+
+static void sec_dsim_display_mode(struct sec_dsim *dsim)
+{
+	struct drm_display_mode *mode = &dsim->mode;
+	u32 reg;
+
+	if (dsim->mode_flags & MIPI_DSI_MODE_VIDEO)
+		sec_dsim_video_mode(dsim);
+
+	/* image resolution */
+	reg = dsim_read(dsim, DSIM_MDRESOL);
+
+	reg &= ~MVPORCH_MAINHRESOL_MASK;
+	reg |= MVPORCH_MAINHRESOL(mode->hdisplay);
+	reg &= ~MVPORCH_MAINVRESOL_MASK;
+	reg |= MVPORCH_MAINVRESOL(mode->vdisplay);
+
+	dsim_write(dsim, DSIM_MDRESOL, reg);
+}
+
+static void sec_dsim_config_bridge(struct sec_dsim *dsim)
+{
+	const struct sec_dsim_plat_data *pdata = dsim->pdata;
+	u32 reg;
+
+	reg = dsim_read(dsim, DSIM_CONFIG);
+
+	if (dsim->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) {
+		reg |= CONFIG_NON_CONTINUOUS_CLOCK_LANE;
+		reg |= CONFIG_CLKLANE_STOP_START;
+	}
+
+	if (!(dsim->mode_flags & MIPI_DSI_MODE_VSYNC_FLUSH))
+		reg |= CONFIG_MFLUSH_VS;
+
+	/* disable EoT packets in HS mode */
+	if (!(dsim->mode_flags & MIPI_DSI_MODE_EOT_PACKET))
+		reg |= CONFIG_EOT_R03;
+
+	if (dsim->mode_flags & MIPI_DSI_MODE_VIDEO) {
+		reg |= CONFIG_VIDEOMODE;
+
+		if (dsim->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
+			reg |= CONFIG_BURSTMODE;
+
+		else if (dsim->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
+			reg |= CONFIG_SYNCINFORM;
+
+		if (dsim->mode_flags & MIPI_DSI_MODE_VIDEO_AUTO_VERT)
+			reg |= CONFIG_AUTOMODE;
+
+		if (dsim->mode_flags & MIPI_DSI_MODE_VIDEO_HSE)
+			reg |= CONFIG_HSEDISABLEMODE;
+
+		if (!(dsim->mode_flags & MIPI_DSI_MODE_VIDEO_HFP))
+			reg |= CONFIG_HFPDISABLEMODE;
+
+		if (!(dsim->mode_flags & MIPI_DSI_MODE_VIDEO_HBP))
+			reg |= CONFIG_HBPDISABLEMODE;
+
+		if (!(dsim->mode_flags & MIPI_DSI_MODE_VIDEO_HSA))
+			reg |= CONFIG_HSADISABLEMODE;
+	}
+
+	/* pixel format */
+	reg &= ~CONFIG_MAINPIXFORMAT_MASK;
+	if (dsim->mode_flags & MIPI_DSI_MODE_VIDEO) {
+		switch (dsim->format) {
+		case MIPI_DSI_FMT_RGB565:
+			reg |= CONFIG_MAINPIXFORMAT(0x4);
+			break;
+		case MIPI_DSI_FMT_RGB666_PACKED:
+			reg |= CONFIG_MAINPIXFORMAT(0x5);
+			break;
+		case MIPI_DSI_FMT_RGB666:
+			reg |= CONFIG_MAINPIXFORMAT(0x6);
+			break;
+		case MIPI_DSI_FMT_RGB888:
+			reg |= CONFIG_MAINPIXFORMAT(0x7);
+			break;
+		default:
+			reg |= CONFIG_MAINPIXFORMAT(0x7);
+			break;
+		}
+	}
+
+	/* number of data lanes */
+	reg &= ~CONFIG_NUMOFDATLANE_MASK;
+	reg |= CONFIG_NUMOFDATLANE(dsim->lanes - 1);
+
+	/* enable data, clock lane */
+	reg &= ~CONFIG_LANEEN_MASK;
+	reg |= CONFIG_LANEEN(BIT(dsim->lanes) - 1);
+	reg |= CONFIG_CLKLANEEN;
+
+	dsim_write(dsim, DSIM_CONFIG, reg);
+
+	/* escape mode */
+	reg = dsim_read(dsim, DSIM_ESCMODE);
+
+	reg &= ~ESCMODE_STOPSTATE_CN_MASK;
+	reg |= ESCMODE_STOPSTATE_CN(pdata->esc_stop_state_cnt);
+	dsim_write(dsim, DSIM_ESCMODE, reg);
+
+	/* timeout */
+	reg = dsim_read(dsim, DSIM_TIMEOUT);
+
+	reg &= ~TIMEOUT_LPDRTOUT_MASK;
+	reg |= TIMEOUT_LPDRTOUT(0xffff);
+	reg &= ~TIMEOUT_BTAOUT_MASK;
+	reg |= TIMEOUT_BTAOUT(0xff);
+	dsim_write(dsim, DSIM_TIMEOUT, reg);
+}
+
+#ifndef MHZ
+#define MHZ	(1000*1000)
+#endif
+
+static unsigned long sec_dsim_pll_find_pms(struct sec_dsim *dsim,
+					   unsigned long fin,
+					   unsigned long fout,
+					   u8 *p, u16 *m, u8 *s)
+{
+	const struct sec_dsim_plat_data *pdata = dsim->pdata;
+	unsigned long best_freq = 0;
+	u32 min_delta = 0xffffffff;
+	u8 p_min, p_max;
+	u8 _p, best_p;
+	u16 _m, best_m;
+	u8 _s, best_s;
+
+	p_min = DIV_ROUND_UP(fin, (12 * MHZ));
+	p_max = fin / (6 * MHZ);
+
+	for (_p = p_min; _p <= p_max; ++_p) {
+		for (_s = 0; _s <= 5; ++_s) {
+			u64 tmp;
+			u32 delta;
+
+			tmp = (u64)fout * (_p << _s);
+			do_div(tmp, fin);
+			_m = tmp;
+			if (_m < 41 || _m > 125)
+				continue;
+
+			tmp = (u64)_m * fin;
+			do_div(tmp, _p);
+			if (tmp < 500 * MHZ || tmp > pdata->max_freq_hz * MHZ)
+				continue;
+
+			tmp = (u64)_m * fin;
+			do_div(tmp, _p << _s);
+
+			delta = abs(fout - tmp);
+			if (delta < min_delta) {
+				best_p = _p;
+				best_m = _m;
+				best_s = _s;
+				min_delta = delta;
+				best_freq = tmp;
+			}
+		}
+	}
+
+	if (best_freq) {
+		*p = best_p;
+		*m = best_m;
+		*s = best_s;
+	}
+
+	return best_freq;
+}
+
+static unsigned long sec_dsim_set_pll(struct sec_dsim *dsim)
+{
+	unsigned long fin, fout, freq;
+	u8 p, s;
+	u16 m;
+	u32 reg;
+
+	fin = dsim->pll_clk_hz;
+	freq = dsim->burst_clk_hz;
+	fout = sec_dsim_pll_find_pms(dsim, fin, freq, &p, &m, &s);
+	if (!fout) {
+		DRM_DEV_ERROR(dsim->dev,
+			      "failed to find PLL PMS for requested frequency\n");
+		return 0;
+	}
+	DRM_DEV_DEBUG(dsim->dev,
+		      "PLL freq %lu, (p %d, m %d, s %d)\n", fout, p, m, s);
+
+	reg = PLLCTRL_PLLEN | PLLCTRL_PMS_P(p) | PLLCTRL_PMS_M(m) | PLLCTRL_PMS_S(s);
+
+	dsim_write(dsim, DSIM_PLLCTRL, reg);
+
+	regmap_read_poll_timeout(dsim->regmap, DSIM_STATUS, reg,
+				 reg & STATUS_PLLSTABLE, 0, 1000);
+	return fout;
+}
+
+static int sec_dsim_enable_clock(struct sec_dsim *dsim)
+{
+	const struct sec_dsim_plat_data *pdata = dsim->pdata;
+	unsigned long hs_clk, byte_clk, esc_clk;
+	unsigned long esc_div;
+	u32 reg;
+
+	/* pll timer */
+	dsim_write(dsim, DSIM_PLLTMR, pdata->pll_timer);
+
+	/* pll control */
+	hs_clk = sec_dsim_set_pll(dsim);
+	if (!hs_clk) {
+		DRM_DEV_ERROR(dsim->dev, "failed to configure DSI PLL\n");
+		return -EFAULT;
+	}
+
+	byte_clk = hs_clk / 8;
+	esc_div = DIV_ROUND_UP(byte_clk, dsim->esc_clk_hz);
+	esc_clk = byte_clk / esc_div;
+
+	if (esc_clk > 20 * MHZ) {
+		++esc_div;
+		esc_clk = byte_clk / esc_div;
+	}
+
+	DRM_DEV_DEBUG(dsim->dev,
+		      "PLL: hs_clk = %lu, byte_clk = %lu, esc_clk = %lu, esc_div = %lu\n",
+		      hs_clk, byte_clk, esc_clk, esc_div);
+
+	/* clk control */
+	reg = dsim_read(dsim, DSIM_CLKCTRL);
+
+	reg |= CLKCTRL_TXREQUESTHSCLK;
+	reg |= CLKCTRL_ESCCLKEN;
+	reg &= ~CLKCTRL_PLLBYPASS;
+	reg &= ~CLKCTRL_BYTECLKSRC_MASK;
+	reg |= CLKCTRL_BYTECLKEN;
+	reg &= ~CLKCTRL_LANEESCDATAEN_MASK;
+	reg |= CLKCTRL_LANEESCDATAEN(BIT(dsim->lanes) - 1);
+	reg |= CLKCTRL_LANEESCCLKEN;
+	reg &= ~CLKCTRL_ESCPRESCALER_MASK;
+	reg |= CLKCTRL_ESCPRESCALER(esc_div);
+
+	dsim_write(dsim, DSIM_CLKCTRL, reg);
+
+	return 0;
+}
+
+static void sec_dsim_fifo_enable(struct sec_dsim *dsim, bool enable)
+{
+	u32 reg;
+
+	reg = dsim_read(dsim, DSIM_FIFOCTRL);
+
+	reg &= ~FIFOCTRL_INIT_MASK;
+	dsim_write(dsim, DSIM_FIFOCTRL, reg);
+	udelay(500);
+
+	if (!enable)
+		return;
+
+	reg |= FIFOCTRL_NINITRX	|
+	       FIFOCTRL_NINITSFR |
+	       FIFOCTRL_NINITI80 |
+	       FIFOCTRL_NINITSUB |
+	       FIFOCTRL_NINITMAIN;
+	dsim_write(dsim, DSIM_FIFOCTRL, reg);
+	udelay(500);
+}
+
+static void sec_dsim_set_display(struct sec_dsim *dsim, bool enable)
+{
+	u32 reg;
+
+	reg = dsim_read(dsim, DSIM_MDRESOL);
+
+	if (enable)
+		reg |= MDRESOL_MAINSTANDBY;
+	else
+		reg &= ~MDRESOL_MAINSTANDBY;
+	dsim_write(dsim, DSIM_MDRESOL, reg);
+}
+
+static void sec_dsim_bridge_enable(struct drm_bridge *bridge)
+{
+	struct sec_dsim *dsim = bridge_to_dsim(bridge);
+	int ret;
+
+	/* enable bridge clocks */
+	clk_prepare_enable(dsim->clk_bus);
+	clk_prepare_enable(dsim->clk_phy_ref);
+
+	/* initialize the irq */
+	sec_dsim_irq_init(dsim);
+
+	/* configure the bridge */
+	sec_dsim_config_bridge(dsim);
+
+	/* enable fifo control */
+	sec_dsim_fifo_enable(dsim, true);
+
+	/* configure the display mode */
+	sec_dsim_display_mode(dsim);
+
+	/* config dsim pll */
+	ret = sec_dsim_enable_clock(dsim);
+	if (ret) {
+		DRM_DEV_ERROR(dsim->dev, "failed to enable clock: %d\n", ret);
+		return;
+	}
+
+	/* power on the dphy */
+	ret = phy_init(dsim->phy);
+	if (ret) {
+		DRM_DEV_ERROR(dsim->dev, "failed to init phy %d\n", ret);
+		return;
+	}
+
+	/* power on the dphy */
+	ret = phy_power_on(dsim->phy);
+	if (ret) {
+		DRM_DEV_ERROR(dsim->dev, "failed to enable phy %d\n", ret);
+		return;
+	}
+
+	/* enable data transfer */
+	sec_dsim_set_display(dsim, true);
+}
+
+static void sec_dsim_disable_clock(struct sec_dsim *dsim)
+{
+	u32 reg;
+
+	/* clk control */
+	reg = dsim_read(dsim, DSIM_CLKCTRL);
+
+	reg &= ~CLKCTRL_TXREQUESTHSCLK;
+	reg &= ~CLKCTRL_BYTECLKEN;
+	reg &= ~CLKCTRL_ESCCLKEN;
+	reg &= ~CLKCTRL_LANEESCDATAEN_MASK;
+	reg &= ~CLKCTRL_LANEESCCLKEN;
+	dsim_write(dsim, DSIM_CLKCTRL, reg);
+
+	/* pll control */
+	reg  = dsim_read(dsim, DSIM_PLLCTRL);
+
+	reg &= ~PLLCTRL_PLLEN;
+	dsim_write(dsim, DSIM_PLLCTRL, reg);
+}
+
+static void sec_dsim_bridge_disable(struct drm_bridge *bridge)
+{
+	struct sec_dsim *dsim = bridge_to_dsim(bridge);
+
+	/* disable data transfer */
+	sec_dsim_set_display(dsim, false);
+
+	/* disable bridge clocks */
+	sec_dsim_disable_clock(dsim);
+
+	/* disable fifo control */
+	sec_dsim_fifo_enable(dsim, false);
+
+	/* power off the phy */
+	phy_power_off(dsim->phy);
+
+	/* exit the phy */
+	phy_exit(dsim->phy);
+
+	/* disable bridge clock */
+	clk_disable_unprepare(dsim->clk_phy_ref);
+	clk_disable_unprepare(dsim->clk_bus);
+}
+
+static bool sec_dsim_bridge_mode_fixup(struct drm_bridge *bridge,
+				       const struct drm_display_mode *mode,
+				       struct drm_display_mode *adjusted_mode)
+{
+	adjusted_mode->flags |= (DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
+	adjusted_mode->flags &= ~(DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
+
+	return true;
+}
+
+static void sec_dsim_bridge_mode_set(struct drm_bridge *bridge,
+				     const struct drm_display_mode *mode,
+				     const struct drm_display_mode *adjusted_mode)
+{
+	struct sec_dsim *dsim = bridge_to_dsim(bridge);
+
+	drm_mode_copy(&dsim->mode, adjusted_mode);
+}
+
+static int sec_dsim_bridge_attach(struct drm_bridge *bridge,
+				  enum drm_bridge_attach_flags flags)
+{
+	struct sec_dsim *dsim = bridge_to_dsim(bridge);
+	struct drm_bridge *panel_bridge;
+	struct drm_panel *panel;
+	int ret;
+
+	ret = drm_of_find_panel_or_bridge(dsim->dev->of_node, 1, 0, &panel,
+					  &panel_bridge);
+	if (ret)
+		return ret;
+
+	if (panel) {
+		panel_bridge = drm_panel_bridge_add(panel);
+		if (IS_ERR(panel_bridge))
+			return PTR_ERR(panel_bridge);
+	}
+	dsim->panel_bridge = panel_bridge;
+
+	if (!dsim->panel_bridge)
+		return -EPROBE_DEFER;
+
+	return drm_bridge_attach(bridge->encoder, dsim->panel_bridge, bridge,
+				 flags);
+}
+
+static void sec_dsim_bridge_detach(struct drm_bridge *bridge)
+{
+	struct sec_dsim *dsim = bridge_to_dsim(bridge);
+
+	drm_of_panel_bridge_remove(dsim->dev->of_node, 1, 0);
+}
+
+static const struct drm_bridge_funcs sec_dsim_bridge_funcs = {
+	.enable		= sec_dsim_bridge_enable,
+	.disable	= sec_dsim_bridge_disable,
+	.mode_set	= sec_dsim_bridge_mode_set,
+	.mode_fixup	= sec_dsim_bridge_mode_fixup,
+	.attach		= sec_dsim_bridge_attach,
+	.detach		= sec_dsim_bridge_detach,
+};
+
+static const struct drm_bridge_timings sec_dsim_bridge_timings = {
+	.input_bus_flags = DRM_BUS_FLAG_DE_LOW,
+};
+
+static const struct sec_dsim_plat_data imx8mm_mipi_dsim_plat_data = {
+	.version		= 0x1060200,
+	.pll_timer		= 500,
+	.max_freq_hz		= 2100,
+	.esc_stop_state_cnt	= 0xf,
+};
+
+static const struct of_device_id sec_dsim_dt_ids[] = {
+	{
+		.compatible = "fsl,imx8mm-sec-dsim",
+		.data = &imx8mm_mipi_dsim_plat_data,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sec_dsim_dt_ids);
+
+static int sec_dsim_parse_dt(struct sec_dsim *dsim)
+{
+	struct platform_device *pdev = to_platform_device(dsim->dev);
+	struct device *dev = dsim->dev;
+	struct device_node *node = dev->of_node;
+	struct clk *clk;
+	void __iomem *base;
+	u32 value;
+	int irq;
+	int ret;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	dsim->regmap = devm_regmap_init_mmio(dev, base, &sec_dsim_regmap_config);
+	if (IS_ERR(dsim->regmap)) {
+		ret = PTR_ERR(dsim->regmap);
+		DRM_DEV_ERROR(dev, "failed to create sec dsim regmap: %d\n", ret);
+		return ret;
+	}
+
+	dsim->phy = devm_phy_get(dev, "dphy");
+	if (IS_ERR(dsim->phy)) {
+		DRM_DEV_ERROR(dev, "failed to get dsim phy\n");
+		return PTR_ERR(dsim->phy);
+	}
+
+	clk = devm_clk_get(dev, "bus");
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		DRM_DEV_ERROR(dev, "failed to get bus clock: %d\n", ret);
+		return ret;
+	}
+	dsim->clk_bus = clk;
+
+	clk = devm_clk_get(dev, "phy_ref");
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		DRM_DEV_ERROR(dev, "failed to get phy_ref clock: %d\n", ret);
+		return ret;
+	}
+	dsim->clk_phy_ref = clk;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -ENODEV;
+
+	ret = devm_request_irq(dev, irq, sec_dsim_irq_handler, 0, dev_name(dev), dsim);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to request dsim irq: %d\n", ret);
+		return ret;
+	}
+
+	if (!of_property_read_u32(node, "samsung,pll-clock-frequency", &value))
+		dsim->pll_clk_hz = value;
+
+	if (!of_property_read_u32(node, "samsung,burst-clock-frequency", &value))
+		dsim->burst_clk_hz = value;
+
+	if (!of_property_read_u32(node, "samsung,esc-clock-frequency", &value))
+		dsim->esc_clk_hz = value;
+
+	init_completion(&dsim->pll_stable);
+	init_completion(&dsim->ph_tx_done);
+	init_completion(&dsim->pl_tx_done);
+	init_completion(&dsim->rx_done);
+
+	return 0;
+}
+
+static int sec_dsim_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct of_device_id *of_id;
+	struct sec_dsim *dsim;
+	int version;
+	int ret;
+
+	dsim = devm_kzalloc(dev, sizeof(*dsim), GFP_KERNEL);
+	if (!dsim) {
+		DRM_DEV_ERROR(dev, "failed to allocate dsim\n");
+		return -ENOMEM;
+	}
+
+	of_id = of_match_device(sec_dsim_dt_ids, dev);
+	if (!of_id)
+		return -ENODEV;
+
+	dsim->pdata = of_id->data;
+	dsim->dev = dev;
+
+	ret = sec_dsim_parse_dt(dsim);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to parse dt: %d\n", ret);
+		return ret;
+	}
+
+	version = dsim_read(dsim, DSIM_VERSION);
+	WARN_ON(version != dsim->pdata->version);
+	DRM_DEV_INFO(dev, "DSIM version number is %#x\n", version);
+
+	dsim->host.ops = &sec_dsim_host_ops;
+	dsim->host.dev = dsim->dev;
+
+	ret = mipi_dsi_host_register(&dsim->host);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to register mipi dsi host: %d\n", ret);
+		return ret;
+	}
+
+	dsim->bridge.driver_private = dsim;
+	dsim->bridge.funcs = &sec_dsim_bridge_funcs;
+	dsim->bridge.of_node = dev->of_node;
+	dsim->bridge.timings = &sec_dsim_bridge_timings;
+
+	dev_set_drvdata(dev, dsim);
+
+	drm_bridge_add(&dsim->bridge);
+
+	return 0;
+}
+
+static int sec_dsim_remove(struct platform_device *pdev)
+{
+	struct sec_dsim *dsim = platform_get_drvdata(pdev);
+
+	mipi_dsi_host_unregister(&dsim->host);
+	drm_bridge_remove(&dsim->bridge);
+
+	return 0;
+}
+
+struct platform_driver sec_dsim_driver = {
+	.probe    = sec_dsim_probe,
+	.remove   = sec_dsim_remove,
+	.driver   = {
+		.name = DRIVER_NAME,
+		.of_match_table = sec_dsim_dt_ids,
+	},
+};
+
+module_platform_driver(sec_dsim_driver);
+
+MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>");
+MODULE_DESCRIPTION("Samsung SEC MIPI DSIM Bridge driver");
+MODULE_LICENSE("GPL v2");